TLE92633BQXXUMA2 - Mid-Range+ SBC, 5V/3.3V LDO, CAN FD, LIN | Infineon
部品番号: TLE92633BQXXUMA2 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $6.42 | $6.42 |
| 10 | $5.79 | $57.90 |
| 100 | $5.18 | $518.00 |
| 500 | $4.65 | $2,325.00 |
| 1,000 | $4.15 | $4,150.00 |
| 2,500 | $3.78 | $9,450.00 |
TLE92633BQXXUMA2 概要
A System Basis Chip (SBC) is a highly integrated power management and communication IC for automotive ECUs that combines a voltage regulator with transceivers for in-vehicle networking, typically CAN and LIN. Within the broader hierarchy, SBCs sit above standalone LDOs and standalone CAN/LIN transceivers, and below complete Automotive Power Management ICs (PMICs); by consolidating these functions on one die, SBCs reduce PCB area, quiescent current, and BOM cost in body controllers, gateways, and sensor nodes.
The TLE92633BQXXUMA2 features a 5V LDO (and a 3.3V LDO variant in the family), high-speed CAN FD with bus wake-up capability, two LIN transceivers, an integrated watchdog timer with multiple window modes, and a typical quiescent current of approximately 3.5mA. The PG-VQFN-48-79 exposed-pad package enables robust thermal performance for the harsh automotive under-hood environment and supports surface-mount manufacturing flows.
Typical applications include automotive body control modules (BCMs), central gateway ECUs, HVAC controllers, seat and door zone modules, and sensor/ECU nodes that communicate over CAN FD or LIN. The wide 3V to 28V input range tolerates load-dump and jump-start transients typical of 12V automotive power nets, and the watchdog supports ASIL-rated system architectures.
When designing with this SBC, follow Infineon's PCB layout guidance for the exposed pad to keep junction temperature within the -40C to +150C automotive range, and choose the appropriate LDO variant (5V or 3.3V) for the downstream microcontroller core voltage.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes for the TLE92633BQXXUMA2 not consolidated in the manufacturer datasheet alone.
ドロップイン代替品: TLE92633BQXXUMA2 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: TLE92633BQXXUMA2 （同一形状・フットプリント） — 相違点: Package, Product Type, AEC-Q100 Qualification, MSL Level, Interface.
クイック比較ツール — 並列比較する代替部品を選択:
TLE9263BQX
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TLE9263-3BQX
✅ ドロップイン📋 参考代替品（カタログ未掲載）
TLE92623BQXXUMA2
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$2.45 / 個
データシートを見る →TLE92783BQX
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TLE92633BQXUMA2
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TLE92633BQXXUMA2 最大定格＆電気的特性
| Product Type | System Basis Chip (SBC) PMIC |
| Family | OPTIREG Mid-Range+ |
| 入力電圧範囲 | 3 V to 28 V |
| Integrated LDOs | 5 V LDO (3.3 V in family variants) |
| CAN Interface | CAN FD high-speed transceiver with bus wake-up |
| LIN Interface | Two LIN transceivers |
| Watchdog | Integrated watchdog, multiple window modes |
| Typical Quiescent Current | 3.5 mA |
| 動作温度範囲 | -40 C to +150 C (junction) |
| パッケージ | PG-VQFN-48-79 (48-VFQFN exposed pad) |
| 実装タイプ | Surface Mount |
| Packaging | Tape & Reel (TR) |
| Target Application | Automotive CAN-LIN body and gateway ECUs |
| RoHS ステータス | Compliant |
| AEC-Q100 Qualification | Automotive grade |
TLE92633BQXXUMA2 pg-vqfn-48-79 (48-vfqfn exposed pad) ピン配置ガイド
TLE92633BQXXUMA2 (pg-vqfn-48-79 (48-vfqfn exposed pad) パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: TLE92633BQXXUMA2.
詳細は データシート をご参照ください。
主な用途
TLE92633BQXXUMA2 の用途: 6 件s: Automotive Body Control Module (BCM), Central Gateway ECU, HVAC Control Module, Door/Seat Zone Module, Sensor/ECU Node (LIN Slave), Automotive Lighting Module (LIN-driven).
Automotive Body Control Module (BCM)
The TLE92633BQXXUMA2 is well-suited for 12V automotive body control modules because it consolidates a 5V LDO, a 3.3V LDO, and CAN FD plus dual LIN transceivers into a single PG-VQFN-48-79 chip. This reduces the BCM PCB area by approximately 30 percent versus discrete regulator-plus-transceiver solutions, and the 3V to 28V input range handles 12V cranking and load-dump events per ISO 7637. The integrated watchdog with multiple window modes supports ASIL-rated system architectures used in BCMs.
おすすめ
Central Gateway ECU
In automotive central gateway ECUs that bridge CAN FD and LIN subnetworks, the TLE92633BQXXUMA2 provides both network interfaces plus the microcontroller power rails from a single 12V battery source. The CAN FD transceiver supports bit rates up to 5 Mbit/s for high-bandwidth gateway traffic, while the dual LIN transceivers serve body and comfort sub-buses. The integrated 5V/3.3V LDOs power the gateway MCU directly, eliminating external PMICs and reducing BOM cost.
おすすめ
HVAC Control Module
The TLE92633BQXXUMA2 powers HVAC control modules that communicate with the vehicle body network over CAN FD or LIN. Its -40C to +150C junction temperature range handles the under-dash thermal environment, while the integrated watchdog supports fault recovery for safety-relevant HVAC functions. The 3.5mA typical quiescent current keeps battery drain low during parked-vehicle states, important for always-on HVAC features.
おすすめ
Door/Seat Zone Module
Door and seat zone modules require compact integration of LIN communication, sensor power, and actuator drive logic, all powered from the 12V battery. The TLE92633BQXXUMA2 fits this role with its dual LIN channels and dual LDO outputs, occupying less than 50 mm^2 of PCB area including passives. The PG-VQFN-48-79 package's exposed pad enables sustained operation in the door cavity's elevated ambient temperatures.
おすすめ
Sensor/ECU Node (LIN Slave)
For LIN-slave sensor nodes (e.g., rain-light, ambient temperature, or occupancy sensors), the TLE92633BQXXUMA2 provides the LIN physical layer plus 5V/3.3V rails to power the sensor MCU and analog front end from the 12V vehicle bus. Its bus-wake capability allows the sensor to wake the rest of the network when needed, supporting partial-networking strategies that reduce quiescent drain across the vehicle.
おすすめ
Automotive Lighting Module (LIN-driven)
LED headlamp or tail-lamp modules that communicate over LIN benefit from the TLE92633BQXXUMA2's combined power and communications integration. The 5V LDO can supply a companion LED driver (e.g., ILD8150EXUMA1), while the 3.3V LDO powers the lighting MCU. The 3V to 28V input range tolerates the load-dump pulses that occur on the 12V battery during alternator-load switching events.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: TLE92633BQXXUMA2 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | TLE9263BQX | TLE9263-3BQX | TLE92623BQXXUMA2 | TLE92783BQX |
|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-VQFN-48-79 | PG-VQFN-48-79 - same | PG-VQFN-48-79 - same | PG-VQFN-48-79 - same | PG-VQFN-48-79 - same |
| Input Voltage Range | 3 V to 28 V | 3 V to 28 V | 3 V to 28 V | 3 V to 28 V | 3 V to 28 V |
| 5V LDO | Yes | Yes | Yes | Yes | Yes |
| 3.3V LDO | Yes | No | Yes | Yes | Yes |
| CAN FD Transceiver | Yes | Yes | Yes | Yes | Yes |
| LIN Transceivers | 2 | 2 | 2 | 1 | 2 |
| Watchdog | Yes (multi-window) | Yes (multi-window) | Yes (multi-window) | Yes (multi-window) | Yes (multi-window) |
| Automotive Grade (AEC-Q100) | Yes | Yes | Yes | Yes | Yes |
主な差別化要因
- Dual LDO outputs (5V + 3.3V) in single SBC （vs TLE9263BQX)
- Dual LIN transceivers for body-network zoning （vs TLE92623BQXXUMA2)
- Same-package mid-range+ SBC family scalability （vs TLE92783BQX)
設計ノート
Solder the exposed thermal pad of the PG-VQFN-48-79 package to a continuous PCB land with at least 16 thermal vias to the inner ground plane. At full CAN FD bus-load and continuous LDO current, internal dissipation can reach approximately 0.7W; without thermal vias, the junction-to-ambient resistance rises above 50 C/W and can exceed the -40C to +150C automotive rating in underhood environments.
Keep the CANH/CANL traces as a differential pair with 100-ohm impedance, and place a common-mode choke within 5 mm of the IC pins to meet automotive EMC requirements per IEC 61967. Decouple VS with a 100nF ceramic close to the IC plus a 10uF electrolytic bulk capacitor within 10 mm to absorb load-dump energy. Decouple each LDO output with a 2.2uF X7R ceramic.
Do not operate the TLE92633BQXXUMA2 below 3V on VS without ensuring the 5V LDO output has dropped out first; the integrated reset circuit may assert unexpectedly during slow VBAT ramps. For LIN bus wake-up to function, the WK pin must be configured per the Infineon TLE9263 family datasheet; a floating WK pin prevents bus wake from reaching the MCU.
Route the CAN and LIN signals on the top layer with a continuous ground reference plane below; avoid routing these traces across plane splits which can increase common-mode emissions. Place the IC's exposed pad on a top-layer copper pour that is stitch-bonded to the inner ground plane with a 4x4 via grid to minimize thermal and EMI impedance simultaneously.
コンプライアンス情報
RoHS compliant per distributor listings. AEC-Q100 qualified for automotive use; the -Q suffix in ordering codes indicates the automotive-qualified test flow per Infineon's product naming convention.
