ISL6558IR - Multi-Phase PWM Controller | Renesas
部品番号: ISL6558IR ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $0 | $0.00 |
| 10 | $0 | $0.00 |
| 100 | $0 | $0.00 |
| 500 | $0 | $0.00 |
| 1,000 | $0 | $0.00 |
ISL6558IR 概要
A multi-phase PWM controller is a power-management semiconductor that coordinates multiple buck-converter phases. It generates control signals for external gate drivers, which in turn drive the switching devices and power inductors in each phase. Compared with a single-phase regulator, a multi-phase architecture can distribute current across multiple inductors, reduce current ripple in individual components, and increase usable output current. The ISL6558IR is therefore positioned between a basic PWM controller and a complete converter: the external gate drivers, MOSFETs, inductors, and capacitors remain necessary for the final power stage.
The ISL6558IR datasheet describes it as a multi-purpose precision multi-phase PWM controller with optional active voltage positioning. The verified data identifies compatibility with four named gate-driver families, which gives a designer several implementation paths depending on the selected driver and external switching components. Active voltage positioning, when supported by the system configuration, can help shape load-droop behavior during transient events. The exact setpoint ranges, control-loop limits, fault responses, and compensation requirements must be taken directly from the manufacturer datasheet before release to production.
The principal design challenge is ensuring correct phase coordination, gate-driver timing, current sharing, and layout control in a multi-phase power supply. Place the controller and its decoupling close to the associated support circuitry, keep high-current switching loops compact, and provide adequate thermal relief around the 20-QFN device and external power components. The 5x5 mm QFN package helps reduce board area, but package size alone does not establish current capability or thermal performance. Those values must be verified from the complete ISL6558 data before layout sign-off.
Typical uses for the ISL6558IR include high-current server and desktop voltage rails, processor power systems, networking equipment, graphics systems, and other multiphase buck converters. It is most appropriate when the design needs several externally switched phases, precise PWM coordination, or the flexibility to select a companion gate driver. It is not a standalone regulator and should not be selected without planning the MOSFETs, inductors, current-sense elements, compensation, and gate-driver interface.
A practical selection check begins with confirming the target controller package and pinout, then verifying the companion gate driver, switching frequency, phase configuration, voltage range, current capability, and protection requirements. For a replacement decision, the part must match both the footprint and the control-interface behavior; package similarity alone is insufficient. This page distinguishes verified catalog facts from parameters that still require confirmation from the manufacturer datasheet, helping engineers avoid false precision during component qualification.
This page combines verified distributor identity, package information, controller function, companion-driver references, and engineering-oriented design guidance. It does not invent missing electrical specifications, pricing, lifecycle claims, compliance declarations, or unverified alternatives. For purchasing, obtain a current authorized quotation and confirm package marking, date code, and manufacturing status with the supplier.
ドロップイン代替品: ISL6558IR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
クイック比較ツール — 並列比較する代替部品を選択:
ISL6558IR-T
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL6558CRZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL6558IRZ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL6558IRZA
✅ ドロップイン📋 参考代替品（カタログ未掲載）
ISL6558IR 最大定格＆電気的特性
| Product Type | Multi-phase PWM controller IC |
| Converter Category | Positive-output step-down DC-DC controller |
| パッケージ | 20-QFN (5x5 mm) |
| ピン数 | 20 pins |
| Control Architecture | Multi-phase PWM control |
| Gate Driver Compatibility | HIP6601B, HIP6602B, HIP6603B, or ISL6605 companion gate drivers |
| Active Voltage Positioning | Optional |
ISL6558IR 20-qfn (5x5 mm) ピン配置ガイド
ISL6558IR (20-qfn (5x5 mm) パッケージ) のピン配置。 このパワーデバイスは、ゲート、ドレイン、ソース端子を備えています。非極性パッケージの場合、正確なピン1の向きとフットプリントの詳細については、メーカーのデータシートを参照してください。主な用途には、電源設計、モータ駆動、負荷スイッチングがあります。
詳細なピン配置データはありません: ISL6558IR.
詳細は データシート をご参照ください。
主な用途
ISL6558IR の用途: 6 件s: High-Current Processor Power Rails, Server and Networking Voltage Regulation, Desktop and Graphics Power Systems, Telecommunications and Industrial DC-DC Systems, High-Slew-Rate Communication Equipment, General High-Current Step-Down Converters.
High-Current Processor Power Rails
The ISL6558IR fits high-current processor power rails because it is designed as a multi-phase PWM controller for high-current, high-slew-rate applications. Coordinating multiple external power phases can distribute load current and reduce the burden on any one switching stage. The controller still requires compatible gate drivers such as HIP6601B, HIP6602B, HIP6603B, or ISL6605, plus MOSFETs, inductors, capacitors, and current-sense elements. Designers should verify the controller’s actual voltage, phase-count, timing, and thermal limits against the manufacturer datasheet before selecting the exact external power stage.
おすすめ
Server and Networking Voltage Regulation
A multi-phase buck topology is useful in server and networking equipment where load current changes quickly and output ripple must be controlled. The ISL6558IR provides PWM coordination for externally switched phases, allowing the power converter to use multiple inductors and MOSFET stages instead of relying on one switching path. This can improve transient capability and current sharing when the loop is designed correctly. The final rail voltage, phase count, compensation, and current limits are not specified in the verified snippets and must be taken from the official datasheet.
おすすめ
Desktop and Graphics Power Systems
The ISL6558IR can be used as the control hub for a multiphase converter serving desktop processors, graphics systems, or other high-load digital rails. Its multi-phase PWM architecture is intended to coordinate several gate-driven power stages, while optional active voltage positioning may help tailor transient behavior when properly configured. Because the verified data does not provide the complete control-loop limits or electrical maximums, engineers should use the manufacturer datasheet to set compensation, current sense, dead time, and fault behavior.
おすすめ
Telecommunications and Industrial DC-DC Systems
For telecommunications and industrial systems, a multi-phase controller can support a high-current regulated rail while distributing switching effort across multiple external power stages. The ISL6558IR is relevant when the design needs PWM coordination and compatibility with the named Intersil or Renesas gate-driver families. Industrial temperature, transient, isolation, and regulatory requirements are not supplied in the verified data, so those constraints must be checked separately. The controller should be selected only after confirming its operating limits and the thermal performance of the complete converter.
おすすめ
High-Slew-Rate Communication Equipment
The ISL6558IR is described as suitable for high-slew-rate applications, making it a candidate for communication equipment with rapidly changing load demand and demanding output-transient behavior. Multiple synchronized phases can reduce the effective switching stress per inductor and help maintain a stable rail during load steps. The controller’s PWM outputs must be paired with the correct gate drivers and external power components. Since no verified input-voltage, output-voltage, phase-count, or timing data are available, the designer must validate the complete application against the official datasheet.
おすすめ
General High-Current Step-Down Converters
The ISL6558IR is appropriate when a design requires a dedicated PWM controller for a multiphase buck converter rather than a simple single-switch regulator. It can be paired with one of the named companion gate drivers and configured around external MOSFETs, inductors, and current-sense components. This flexibility supports custom high-current rails for computing, communications, and industrial equipment, but it also places more responsibility on the designer for phase balancing, compensation, protection, and layout. Verify the exact electrical ratings and application circuit in the manufacturer datasheet.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: ISL6558IR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | ISL6558IR-T | ISL6558CRZ | ISL6558IRZ |
|---|---|---|---|---|
| Product Category | Multi-phase PWM controller IC | Multi-phase PWM controller IC | Multi-phase PWM controller IC | Multi-phase PWM controller IC |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Package | 20-QFN (5x5 mm) | 20-QFN (5x5 mm) | QFN-20, size not independently verified | QFN-20, size not independently verified |
| Output Topology | Positive-output step-down | Positive-output step-down | DC-DC converter controller; exact topology not verified | DC-DC converter controller; exact topology not verified |
主な差別化要因
- Explicit multi-phase PWM architecture （vs ISL6558CRZ)
- Named companion-driver ecosystem （vs ISL6558IRZ)
- Optional active voltage positioning （vs ISL6558CRZ)
設計ノート
Design the ISL6558IR as a controller, not as a self-contained regulator. Select a compatible gate driver, then size external MOSFETs, inductors, current-sense elements, and input/output capacitors for the target rail. Confirm the controller's verified voltage and timing limits from the manufacturer datasheet before choosing the power-stage ratings; the distributor snippets do not provide those limits.
Keep the controller, gate-driver interface, decoupling, and feedback or current-sense routing compact and away from high-current switching loops. Minimize parasitic inductance and use the datasheet-recommended layout to control PWM edge effects and measurement noise. A QFN-20 package reduces footprint but does not replace adequate thermal and layout planning.
Thermal analysis must include the controller, gate drivers, MOSFETs, inductors, and copper areas because the ISL6558IR is not the only heat source in the converter. Use the manufacturer thermal data and actual switching-loss estimates rather than relying on package size alone. Validate the highest expected load, ambient temperature, airflow, and copper-coupling conditions before release.
Do not assume that a same-package comparison result proves drop-in interchangeability. Verify pin names and exposed-pad requirements, PWM polarity, phase count, current-sense method, fault response, compensation limits, voltage range, and lifecycle status against the official datasheets. The verified cross-reference snippets identify candidates but do not provide a complete quantified equivalence.
コンプライアンス情報
No compliance declarations were included in the verified web data. Obtain current manufacturer documentation for the exact package and ordering code.
