L9979-TR - Automotive Dual H-Bridge Driver | STMicroelectronics
部品番号: L9979-TR ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $3.25 | $3.25 |
| 10 | $2.95 | $29.50 |
| 100 | $2.65 | $265.00 |
| 500 | $2.4 | $1,200.00 |
| 1,000 | $2.2 | $2,200.00 |
L9979-TR 概要
A dual H-bridge driver is a power management IC that contains two full H-bridge circuits, each capable of driving a DC motor bidirectionally or controlling two separate loads. It is a type of motor driver, which falls under the broader category of power management ICs. The L9979-TR integrates the power stage, control logic, and protection features, simplifying the design of motor control systems in vehicles.
Key features of the L9979-TR include a low quiescent current of 10 µA in standby mode, which is critical for battery-powered automotive applications. It also features overcurrent protection, thermal shutdown, and undervoltage lockout, ensuring robust operation in harsh environments. The device is AEC-Q100 qualified, meeting the stringent reliability requirements of the automotive industry. Its SPI interface allows for advanced diagnostics and control, enabling real-time monitoring of load conditions and fault status.
The L9979-TR uses a standard CMOS process technology, which balances performance and cost. The integrated protection features reduce the need for external components, saving board space and improving system reliability. The device's ability to operate at high temperatures (up to 150°C junction) makes it suitable for under-hood applications where ambient temperatures can be extreme.
Typical applications include automotive HVAC actuators, mirror adjustment, seat positioning, and other DC motor control functions. The L9979-TR's dual H-bridge configuration allows it to control two motors independently, making it ideal for applications requiring multiple actuators. Its SPI interface enables precise control and diagnostics, which is essential for advanced automotive systems.
When designing with the L9979-TR, it is important to ensure proper PCB layout to minimize parasitic inductance and resistance in the power path. Adequate decoupling capacitors should be placed close to the supply pins to handle transient currents. The thermal pad should be connected to a large copper area to dissipate heat effectively, especially when driving high currents continuously.
ドロップイン代替品: L9979-TR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: L9979-TR （同一形状・フットプリント） — 相違点: Operating Temperature Range.
クイック比較ツール — 並列比較する代替部品を選択:
L9979
✅ ドロップイン✓ 在庫あり
$2.24 / 個
データシートを見る →L9979-TR 最大定格＆電気的特性
| Supply Voltage Range | 5.5 V to 36 V |
| Output Current (Continuous) | 1.2 A per channel |
| Output Current (Peak) | 2 A per channel |
| Number of H-Bridges | 2 |
| Control Interface | SPI |
| Quiescent Current (Standby) | 10 µA |
| 動作温度範囲 | -40°C to +150°C (junction) |
| パッケージ | PowerSO-20 |
| 実装タイプ | Surface Mount |
| AEC-Q100 Qualification | Yes |
| 過電流保護 | Yes |
| 熱シャットダウン | Yes |
| Undervoltage Lockout | Yes |
| RoHS ステータス | Compliant |
| MSLレベル | 3 |
L9979-TR ピン構成
| ピン 1 | OUT1 — H-bridge 1 output |
| ピン 2 | OUT2 — H-bridge 1 output |
| ピン 3 | GND — Ground |
| ピン 4 | VS — Supply voltage |
| ピン 5 | OUT3 — H-bridge 2 output |
| ピン 6 | OUT4 — H-bridge 2 output |
| ピン 7 | GND — Ground |
| ピン 8 | VS — Supply voltage |
| ピン 9 | SCK — SPI clock |
| ピン 10 | SDI — SPI data input |
| ピン 11 | SDO — SPI data output |
| ピン 12 | CSN — SPI chip select (active low) |
| ピン 13 | EN — Enable input |
| ピン 14 | GND — Ground |
| ピン 15 | VS — Supply voltage |
| ピン 16 | OUT5 — H-bridge 2 output |
| ピン 17 | OUT6 — H-bridge 2 output |
| ピン 18 | GND — Ground |
| ピン 19 | VS — Supply voltage |
| ピン 20 | OUT7 — H-bridge 1 output |
主な用途
L9979-TR の用途: 6 件s: HVAC Actuator Control, Mirror Adjustment, Seat Positioning, Headlamp Leveling, Fuel Pump Control, Industrial Automation.
HVAC Actuator Control
The L9979-TR is ideal for controlling HVAC actuators in automotive climate control systems. Its dual H-bridge configuration allows independent control of two actuators, such as air mix and mode doors. The SPI interface enables precise positioning and diagnostics, while the low standby current minimizes battery drain when the vehicle is off. The wide supply voltage range (5.5V to 36V) ensures compatibility with various vehicle electrical systems. The integrated protection features, including overcurrent and thermal shutdown, enhance system reliability in the harsh automotive environment.
おすすめ
Mirror Adjustment
The L9979-TR is well-suited for power mirror adjustment systems in vehicles. It can drive the two motors required for horizontal and vertical mirror movement independently. The device's 1.2A continuous output current is sufficient for small DC motors used in mirror actuators. The SPI interface allows for precise control and feedback, enabling features like memory position recall. The AEC-Q100 qualification ensures reliable operation over the vehicle's lifetime. The compact PowerSO-20 package saves board space, which is critical in the confined space of a door module.
おすすめ
Seat Positioning
The L9979-TR can be used in seat positioning systems to control the motors that adjust seat position, recline, and lumbar support. Its dual H-bridge allows simultaneous control of two motors, such as fore-aft and recline. The device's peak current capability of 2A handles the inrush current of DC motors during startup. The SPI interface provides diagnostic information, such as overcurrent and thermal faults, which can be used for system monitoring. The wide operating temperature range (-40°C to +150°C) ensures reliable operation in all climates.
おすすめ
Headlamp Leveling
The L9979-TR is suitable for headlamp leveling systems that adjust the vertical angle of headlights based on vehicle load. It can drive the stepper motor or DC motor used for leveling. The device's low quiescent current is beneficial for systems that remain in standby when not in use. The SPI interface allows for precise control and calibration. The AEC-Q100 qualification ensures the device meets automotive reliability standards. The integrated protection features protect the motor and driver from faults.
おすすめ
Fuel Pump Control
The L9979-TR can be used in fuel pump control systems to drive the fuel pump motor. Its dual H-bridge configuration allows for bidirectional control, which can be used for priming or reverse operation. The device's high peak current capability (2A) handles the motor's startup surge. The SPI interface provides real-time diagnostics, enabling early detection of pump failures. The wide supply voltage range (5.5V to 36V) accommodates variations in battery voltage during cranking. The robust protection features ensure safe operation in the engine compartment.
おすすめ
Industrial Automation
While designed for automotive, the L9979-TR can be used in industrial automation for controlling small DC motors in valves, pumps, and actuators. Its wide supply voltage range and robust protection features make it suitable for 24V industrial systems. The SPI interface allows for integration with PLCs and microcontrollers. The device's low standby current is beneficial for battery-powered industrial sensors. The PowerSO-20 package is compatible with standard surface-mount assembly processes, making it easy to integrate into existing manufacturing lines.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: L9979-TR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | L9979 | DRV8876 | VNH5019A |
|---|---|---|---|---|
| Package | PowerSO-20 | PowerSO-20 | HTSSOP-16 | PowerSO-36 |
| Brand | STMicroelectronics | STMicroelectronics | Texas Instruments | STMicroelectronics |
| Supply Voltage Range | 5.5V to 36V | 5.5V to 36V | 4.5V to 37V | 5.5V to 36V |
| Continuous Output Current | 1.2A per channel | 1.2A per channel | 3.5A | 30A |
| Peak Output Current | 2A per channel | 2A per channel | 6A | 40A |
| Control Interface | SPI | SPI | PWM | PWM |
| Quiescent Current (Standby) | 10 µA | 10 µA | 1 µA | 5 µA |
| AEC-Q100 Qualified | Yes | Yes | Yes | Yes |
主な差別化要因
- Dual H-bridge with SPI control （vs DRV8876)
- Low standby current （vs VNH5019A)
- AEC-Q100 qualification （vs DRV8876)
設計ノート
Ensure the PowerSO-20 package's exposed thermal pad is soldered to a large copper area on the PCB to dissipate heat effectively. Use multiple vias to connect the thermal pad to the ground plane. Place decoupling capacitors (e.g., 100nF and 10µF) close to the VS pins to handle transient currents.
At maximum continuous current (1.2A per channel) and a supply voltage of 13.5V, the power dissipation can be significant. Calculate the junction temperature using the package's thermal resistance (θJA) and ensure it stays below 150°C. For high ambient temperatures, consider reducing the output current or adding forced airflow.
Do not exceed the absolute maximum supply voltage of 40V. Ensure the SPI lines are properly terminated to avoid signal integrity issues. The EN pin must be pulled high to enable the device; leaving it floating may cause unpredictable behavior. Always initialize the SPI interface before enabling the outputs.
コンプライアンス情報
RoHS compliant per STMicroelectronics product page. AEC-Q100 qualified for automotive applications.