LC4064B-10T44I - 64-Macrocell 10 ns CPLD | Lattice Semiconductor
部品番号: LC4064B-10T44I ✗ 生産終了LC4064B-10T44I 概要
A CPLD is a programmable logic device that combines nonvolatile configuration storage, programmable logic structures, and user I/O in a single integrated circuit. Within the semiconductor hierarchy, the LC4064B belongs to the complex programmable logic device class, alongside FPGA and CPLD devices used to implement fixed digital functions that can be revised during development or field updates.
The ispMACH 4000B architecture provides four logic blocks and 64 macrocells for moderate-density combinational and sequential logic. Its 10 ns speed designation supports interfaces and control functions operating above the timing range of slower legacy PLDs. Thirty I/O pins provide access to external buses, status signals, and control lines while keeping the device in a compact 44-TQFP package measuring 10 mm by 10 mm.
Programming support for 1.8 V, 2.5 V, and 3.3 V systems enables integration with contemporary mixed-voltage logic. The manufacturer datasheet identifies the LC4064B-10T44I as an in-system programmable SuperFAST high-density PLD, making it suitable for designs where a small logic array must be updated without replacing the assembled board.
Typical uses include industrial control logic, peripheral adapters, legacy bus conditioning, display and instrument interfaces, and compact embedded control systems. The 30 I/O count is particularly useful for bridge functions requiring several data, address, enable, and status signals without moving to a larger programmable-logic package.
PCB design should preserve the package power and ground connectivity specified in the manufacturer datasheet and route programming signals away from sensitive clock or data paths. Because the public product information confirms the 44-terminal TQFP outline but does not reproduce the complete pin-description table, use the manufacturer pinout for every board-level assignment.
This page combines the device architecture, package information, programming interfaces, pin-compatible family alternatives, comparison criteria, and practical application guidance needed to evaluate the LC4064B-10T44I for an existing programmable-logic design.
ドロップイン代替品: LC4064B-10T44I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LC4064B-10T44I (同一形状・フットプリント) — 相違点: Speed Grade, Mounting Type, Package, Product Family, Supported Supply Voltages.
LC4064B-10TN44I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4064C-10T44I
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4064V-10T44I
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4064V-10TN44I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4064B-10T44C
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LC4064B-10T44I 最大定格&電気的特性
| Manufacturer | Lattice Semiconductor Corporation |
| Device Type | Complex programmable logic device (CPLD) |
| Product Family | ispMACH 4000B |
| Architecture | SuperFAST high-density PLD |
| Macrocells | 64 macrocells |
| Logic Blocks | 4 logic blocks |
| Maximum Propagation Delay | 10 ns |
| User I/O Pins | 30 I/O pins |
| Package Type | 44-pin TQFP |
| Package Body Size | 10 mm x 10 mm |
| Total Terminals | 44 terminals |
| Lead Form | Gull wing |
| 実装タイプ | Surface mount |
| Programmable Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| Internal Supply Voltage Range | 2.3 V to 2.7 V |
| Configuration Method | In-system programmable |
LC4064B-10T44I 10 mm x 10 mm ピン配置ガイド
LC4064B-10T44I (10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LC4064B-10T44I.
詳細は データシート をご参照ください。
主な用途
LC4064B-10T44I の用途: 6 件s: Industrial Control Logic, Peripheral Bus Adapters, Instrument and Display Interfaces, Portable and Embedded Systems, Network Equipment Line Cards, Security and Surveillance Modules.
Industrial Control Logic
The LC4064B-10T44I fits compact industrial control blocks that combine interlocks, sequencing, alarm logic, and interface conditioning. Its four logic blocks and 64 macrocells provide enough programmable logic for several related control functions without requiring a large FPGA. The 10 ns maximum propagation-delay designation supports faster decision paths than older programmable-logic families, while 30 I/O pins can accommodate discrete sensors, relay-control outputs, status LEDs, and communication signals. In-system programming at 1.8 V, 2.5 V, and 3.3 V also allows configuration updates during commissioning or maintenance without replacing the controller board.
おすすめ
Peripheral Bus Adapters
The LC4064B-10T44I can implement protocol translation, command decoding, address decoding, and ready/valid generation between mixed legacy peripherals. With 30 user I/O pins, it can bridge parallel data, control, interrupt, and chip-select signals while leaving programming and dedicated functions to the manufacturer-defined assignments. The 10 ns speed class is useful for short combinational and registered paths in adapter boards, and the 44-pin TQFP outline supports compact interfaces in embedded equipment. In-system programmability makes the adapter suitable for prototypes and deployed products that may require field configuration updates.
おすすめ
Instrument and Display Interfaces
The LC4064B-10T44I is appropriate for instrument-panel and display-adapter logic that converts commands and sensor conditions into display-control signals. Four logic blocks and 64 macrocells can organize timing, counters, encoders, and display-enable functions, while 30 I/O pins provide connections to display modules, buttons, indicators, and a host processor. The 10 ns propagation-delay rating supports common control paths, and the 10 mm by 10 mm TQFP package simplifies routing on densely populated instrument boards. Programmable configuration is especially useful when panel interfaces differ between product variants or require post-deployment adjustments.
おすすめ
Portable and Embedded Systems
The LC4064B-10T44I can serve as a compact programmable-logic companion in portable instruments, sensor modules, and embedded accessories where the host processor needs deterministic interface assistance. Its 44-pin TQFP package provides 30 user I/O pins for low-speed communication, status, and control paths without requiring the larger footprint of a high-density FPGA. The 10 ns speed designation helps preserve timing margins in short control loops, while 1.8 V, 2.5 V, and 3.3 V in-system programming options support integration with multiple logic-voltage domains. Its reprogrammability allows interface revisions without a board respin.
おすすめ
Network Equipment Line Cards
The LC4064B-10T44I is useful in network-interface and line-card designs that require local status decoding, control-signal conditioning, or fault-logic coordination. The 30 available I/O pins can support multiple interface flags, enables, interrupt inputs, and diagnostic outputs, while the 10 ns speed class handles fast local control paths around a host processor. In-system programming permits configuration changes for different board revisions or field diagnostics without changing the PCB. A 44-pin TQFP also allows the logic to fit beside high-density communication processors without introducing a large package into the line card.
おすすめ
Security and Surveillance Modules
The LC4064B-10T44I can implement local timing, alarm, trigger, and output-control functions in compact surveillance equipment. Four logic blocks and 64 macrocells are suitable for coordinating sensor inputs, motion-enable signals, relay drivers, status indicators, and host interrupts without monopolizing a main processor. The 10 ns timing class supports rapid propagation through short control paths, and 30 I/O pins leave sufficient connectivity for several discrete surveillance functions. In-system programmability supports product variants and field configuration, although designers should use the manufacturer security guidance when protecting configuration data or implementing authenticated updates.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LC4064B-10T44I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LC4064B-10TN44I | LC4064C-10T44I | LC4064V-10T44I | LC4064V-10TN44I | LC4064B-10T44C |
|---|---|---|---|---|---|---|
| Package | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Product Family | ispMACH 4000B | ispMACH 4000B | LC4064C family | ispMACH 4000V family | ispMACH 4000V family | ispMACH 4000B family |
| Maximum Propagation Delay | 10 ns | 10 ns | 10 ns | 10 ns | 10 ns | 10 ns |
主な差別化要因
- Matches the same 10 ns timing class as the listed same-footprint alternatives (vs LC4064V-10T44I)
- Provides 64 macrocells for moderate-density control logic (vs LC4064C-10T44I)
- Supports three in-system programming voltage options (vs LC4064B-10TN44I)
設計ノート
Use the manufacturer's 44-pin TQFP land pattern and follow the pin-description table for every power, ground, clock, programming, and user-I/O connection. Place decoupling capacitors at the device supply pins with short return paths to the corresponding ground plane, and avoid routing programming or high-speed external signals beneath the package where they could couple into adjacent inputs.
Treat the 10 ns propagation-delay rating as a device timing parameter rather than a complete system-timing guarantee. External traces, connectors, ground bounce, and input slew can reduce margin. Review the manufacturer AC timing tables, identify the critical paths in the design, and use registered logic or series damping where required to preserve dependable operation in the assembled system.
Do not assume that every 44-terminal LC4064-family ordering code is electrically and programmatically interchangeable with the LC4064B-10T44I. Validate the complete pin names, supply requirements, configuration identifier, logic-cell architecture, timing limits, and programming-file compatibility in the Lattice design environment. After substitution, perform power-up, boundary-scan, functional-pattern, and worst-case timing checks before production release.
コンプライアンス情報
No explicit compliance declaration for the exact MPN appears in the manufacturer or distributor product information.