Lattice Semiconductor

LC4064B-10T44I - 64-Macrocell 10 ns CPLD | Lattice Semiconductor

料号: LC4064B-10T44I ✗ 停产
1.8 V, 2.5 V, and 3.3 V Vdss 44-pin TQFP Package
最小起订量: 1 |

LC4064B-10T44I 概述

The Lattice Semiconductor LC4064B-10T44I is an ispMACH 4000B complex programmable logic device with 64 macrocells, four logic blocks, and a maximum propagation delay of 10 ns in a 44-pin TQFP package. It supports 1.8 V, 2.5 V, and 3.3 V in-system programming and provides 30 user I/O pins for compact programmable control, interface, and glue-logic designs.

A CPLD is a programmable logic device that combines nonvolatile configuration storage, programmable logic structures, and user I/O in a single integrated circuit. Within the semiconductor hierarchy, the LC4064B belongs to the complex programmable logic device class, alongside FPGA and CPLD devices used to implement fixed digital functions that can be revised during development or field updates.

The ispMACH 4000B architecture provides four logic blocks and 64 macrocells for moderate-density combinational and sequential logic. Its 10 ns speed designation supports interfaces and control functions operating above the timing range of slower legacy PLDs. Thirty I/O pins provide access to external buses, status signals, and control lines while keeping the device in a compact 44-TQFP package measuring 10 mm by 10 mm.

Programming support for 1.8 V, 2.5 V, and 3.3 V systems enables integration with contemporary mixed-voltage logic. The manufacturer datasheet identifies the LC4064B-10T44I as an in-system programmable SuperFAST high-density PLD, making it suitable for designs where a small logic array must be updated without replacing the assembled board.

Typical uses include industrial control logic, peripheral adapters, legacy bus conditioning, display and instrument interfaces, and compact embedded control systems. The 30 I/O count is particularly useful for bridge functions requiring several data, address, enable, and status signals without moving to a larger programmable-logic package.

PCB design should preserve the package power and ground connectivity specified in the manufacturer datasheet and route programming signals away from sensitive clock or data paths. Because the public product information confirms the 44-terminal TQFP outline but does not reproduce the complete pin-description table, use the manufacturer pinout for every board-level assignment.

This page combines the device architecture, package information, programming interfaces, pin-compatible family alternatives, comparison criteria, and practical application guidance needed to evaluate the LC4064B-10T44I for an existing programmable-logic design.

直接替换替代料: LC4064B-10T44I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LC4064B-10T44I (相同外形与封装尺寸) ——差异在于 Speed Grade, Mounting Type, Package, Product Family, Supported Supply Voltages.

Lattice Semiconductor
Speed Grade: 5 ns
Package: 44-pin TQFP
Supported Supply Voltages: 3.3 V, 2.5 V and 1.8 V
对比 LC4064B-10T44I →
Lattice Semiconductor
Speed Grade: 10 ns
Package: 44-pin TQFP
Supported Supply Voltages: 3.3 V, 2.5 V, and 1.8 V
对比 LC4064B-10T44I →
Lattice Semiconductor
Speed Grade: 125 MHz
Mounting Type: SMD/SMT
Package: TQFP-44
对比 LC4064B-10T44I →

LC4064B-10TN44I

✅ 直接替换
📦 TQFP-44
Same 44-TQFP footprint and 10 ns speed designation; timing difference is 0 ns.

📋 参考替代料(不在目录中)

LC4064C-10T44I

✅ 直接替换
Lattice Semiconductor
📦 TQFP-44
In-system-programmable complex programmable logic device (CPLD) · 64 macros · 10 ns · 3.3 V, 2.5 V, and 1.8 V · 44-pin TQFP · In-system programmable · SuperFAST high-density PLD · LC4064C

联系询价

查看数据手册 →

LC4064V-10T44I

✅ 直接替换
Lattice Semiconductor
📦 TQFP-44
Complex Programmable Logic Device (CPLD) · ispMACH 4000V · Blend of ispLSI 2000 and ispMACH 4A architectures · 64 macrocells · 30 I/Os · 3.3 V · 3.3 V / 2.5 V / 1.8 V · 125 MHz

联系询价

查看数据手册 →

LC4064V-10TN44I

✅ 直接替换
📦 TQFP-44
Same 44-TQFP footprint and 10 ns speed designation; timing difference is 0 ns.

📋 参考替代料(不在目录中)

LC4064B-10T44C

✅ 直接替换 ⚠️ 规格未核验
📦 TQFP-44
Same B-family 44-TQFP footprint and 10 ns speed designation; timing difference is 0 ns.

📋 参考替代料(不在目录中)

LC4064B-10T44I 最大额定值与电气特性

Manufacturer Lattice Semiconductor Corporation
Device Type Complex programmable logic device (CPLD)
Product Family ispMACH 4000B
Architecture SuperFAST high-density PLD
Macrocells 64 macrocells
Logic Blocks 4 logic blocks
Maximum Propagation Delay 10 ns
User I/O Pins 30 I/O pins
Package Type 44-pin TQFP
Package Body Size 10 mm x 10 mm
Total Terminals 44 terminals
Lead Form Gull wing
安装类型 Surface mount
Programmable Supply Voltages 1.8 V, 2.5 V, and 3.3 V
Internal Supply Voltage Range 2.3 V to 2.7 V
Configuration Method In-system programmable

LC4064B-10T44I 10 mm x 10 mm 引脚配置指南

LC4064B-10T44I(10 mm x 10 mm 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

LC4064B-10T44I 的 10 mm x 10 mm 封装引脚图

暂无详细引脚数据: LC4064B-10T44I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LC4064B-10T44I 适用于 6 应用s: Industrial Control Logic, Peripheral Bus Adapters, Instrument and Display Interfaces, Portable and Embedded Systems, Network Equipment Line Cards, Security and Surveillance Modules.

🏭

Industrial Control Logic

The LC4064B-10T44I fits compact industrial control blocks that combine interlocks, sequencing, alarm logic, and interface conditioning. Its four logic blocks and 64 macrocells provide enough programmable logic for several related control functions without requiring a large FPGA. The 10 ns maximum propagation-delay designation supports faster decision paths than older programmable-logic families, while 30 I/O pins can accommodate discrete sensors, relay-control outputs, status LEDs, and communication signals. In-system programming at 1.8 V, 2.5 V, and 3.3 V also allows configuration updates during commissioning or maintenance without replacing the controller board.

🔧

Peripheral Bus Adapters

The LC4064B-10T44I can implement protocol translation, command decoding, address decoding, and ready/valid generation between mixed legacy peripherals. With 30 user I/O pins, it can bridge parallel data, control, interrupt, and chip-select signals while leaving programming and dedicated functions to the manufacturer-defined assignments. The 10 ns speed class is useful for short combinational and registered paths in adapter boards, and the 44-pin TQFP outline supports compact interfaces in embedded equipment. In-system programmability makes the adapter suitable for prototypes and deployed products that may require field configuration updates.

📺

Instrument and Display Interfaces

The LC4064B-10T44I is appropriate for instrument-panel and display-adapter logic that converts commands and sensor conditions into display-control signals. Four logic blocks and 64 macrocells can organize timing, counters, encoders, and display-enable functions, while 30 I/O pins provide connections to display modules, buttons, indicators, and a host processor. The 10 ns propagation-delay rating supports common control paths, and the 10 mm by 10 mm TQFP package simplifies routing on densely populated instrument boards. Programmable configuration is especially useful when panel interfaces differ between product variants or require post-deployment adjustments.

📱

Portable and Embedded Systems

The LC4064B-10T44I can serve as a compact programmable-logic companion in portable instruments, sensor modules, and embedded accessories where the host processor needs deterministic interface assistance. Its 44-pin TQFP package provides 30 user I/O pins for low-speed communication, status, and control paths without requiring the larger footprint of a high-density FPGA. The 10 ns speed designation helps preserve timing margins in short control loops, while 1.8 V, 2.5 V, and 3.3 V in-system programming options support integration with multiple logic-voltage domains. Its reprogrammability allows interface revisions without a board respin.

🌐

Network Equipment Line Cards

The LC4064B-10T44I is useful in network-interface and line-card designs that require local status decoding, control-signal conditioning, or fault-logic coordination. The 30 available I/O pins can support multiple interface flags, enables, interrupt inputs, and diagnostic outputs, while the 10 ns speed class handles fast local control paths around a host processor. In-system programming permits configuration changes for different board revisions or field diagnostics without changing the PCB. A 44-pin TQFP also allows the logic to fit beside high-density communication processors without introducing a large package into the line card.

🎥

Security and Surveillance Modules

The LC4064B-10T44I can implement local timing, alarm, trigger, and output-control functions in compact surveillance equipment. Four logic blocks and 64 macrocells are suitable for coordinating sensor inputs, motion-enable signals, relay drivers, status indicators, and host interrupts without monopolizing a main processor. The 10 ns timing class supports rapid propagation through short control paths, and 30 I/O pins leave sufficient connectivity for several discrete surveillance functions. In-system programmability supports product variants and field configuration, although designers should use the manufacturer security guidance when protecting configuration data or implementing authenticated updates.

What are the key specifications of LC4064B-10T44I that engineers should know?
The LC4064B-10T44I is a 64-macrocell, four-logic-block CPLD with a 10 ns maximum propagation delay, 30 user I/O pins, and a 44-pin TQFP package. According to the Lattice Semiconductor datasheet, it supports in-system programming at 1.8 V, 2.5 V, and 3.3 V. The 10 mm by 10 mm surface-mount package makes it useful for compact control, interface, and peripheral-adaptation circuits where timing, I/O density, and field programmability are important design constraints.
Where can I download the LC4064B-10T44I datasheet PDF?
The LC4064B-10T44I datasheet can be accessed through the Lattice Semiconductor document page linked on this page. According to the manufacturer datasheet, the device belongs to the ispMACH 4000B SuperFAST high-density PLD family. Use the pin-description table, programming information, AC timing tables, and recommended operating conditions from that document when assigning pins or designing the power, clock, and programming networks.
Where can I find the LC4064B-10T44I pinout?
The LC4064B-10T44I pinout is found in the pin-description table of the Lattice Semiconductor datasheet. The device is packaged in a 44-pin TQFP with gull-wing leads and 30 user I/O pins. Use the manufacturer numbering convention and exposed power or ground assignments when laying out the PCB; the package outline alone is not sufficient to determine which pins are usable I/O, dedicated programming pins, clock inputs, or supply terminals.
Is LC4064B-10T44I suitable for industrial control logic?
The LC4064B-10T44I is suitable for compact industrial control logic when the required interface fits its 30 user I/O pins and the design remains within the device timing and operating limits. According to the Lattice Semiconductor datasheet, the part provides four logic blocks, 64 macrocells, and a 10 ns maximum propagation delay. Its in-system programmability also supports configuration changes during board bring-up, maintenance, or deployed equipment updates.
What can replace the LC4064B-10T44I?
The closest drop-in choices include LC4064B-10TN44I, LC4064C-10T44I, LC4064V-10T44I, LC4064V-10TN44I, and LC4064B-10T44C. These candidates use the same 44-pin TQFP format and are members of the related ispMACH 4000 product family. Before replacing the LC4064B-10T44I, verify the programmed pinout, active-low or active-high control signals, supply voltages, timing limits, and any configuration-security differences against the manufacturer datasheet.
What is the difference between LC4064B-10T44I and LC4064B-10TN44I?
Both LC4064B-10T44I and LC4064B-10TN44I are 44-pin TQFP members of the Lattice ispMACH 4000B family and share the 10 ns speed designation. Their distinguishing suffix details require comparison with the manufacturer ordering guide because the public product snippets do not provide a complete pin-function or temperature-grade table. Confirm that every pin name, supply connection, programming signal, and timing threshold matches before treating the TN44I version as a drop-in substitute.
LC4064B-10T44I vs LC4064V-10T44I: which device is better for a legacy interface?
The LC4064B-10T44I and LC4064V-10T44I both use a 44-pin TQFP and are associated with the ispMACH 4000 platform, but they belong to different suffix families. The LC4064B is the appropriate candidate when the original design specifies the B family and its programming behavior. Review the configuration architecture, pin functions, supply requirements, and timing tables before selecting the V-family part for an existing board.
When should I choose LC4064B-10T44I over another ispMACH 4000B option?
Choose the LC4064B-10T44I when an existing design specifies the ispMACH 4000B family, requires 64 macrocells and four logic blocks, and uses the 44-pin TQFP footprint. Its 10 ns propagation-delay designation is appropriate for higher-speed control logic than older CPLDs. Select another family member only after confirming compatibility of the logic architecture, configuration method, pin functions, supply voltages, timing, and device identifier programmed into the system.
Is LC4064B-10T44I the same as LC4064C-10T44I?
The LC4064B-10T44I and LC4064C-10T44I share the LC4064 family name, 44-pin TQFP package format, and 10 ns ordering designation, but the B and C suffix identify different device families or revisions. According to the manufacturer family documentation, substitutions must account for programming-file compatibility and functional differences. Do not treat the shared package as sufficient evidence; validate the logic mapping and configuration bitstream with the Lattice design tools and programming documentation.
What is the best Lattice Semiconductor equivalent for LC4064B-10T44I?
The best drop-in evaluation sequence starts with LC4064B-10TN44I because it remains within the B-family naming and uses the same 44-pin TQFP format. LC4064C-10T44I, LC4064V-10T44I, and LC4064V-10TN44I are additional same-footprint candidates for comparison, while LC4064B-10T44C represents another B-family ordering option. The final choice depends on verified pin compatibility, supply conditions, timing, configuration behavior, and programmed-device recognition.
Where can I buy LC4064B-10T44I online?
The LC4064B-10T44I can be requested through the Request a Quote form on this page. The form should be used to confirm current availability, minimum order quantity, lead time, and the exact TQFP ordering suffix. Because programmable devices can have subtle differences in configuration support or lifecycle status, provide the complete MPN, required quantity, and target delivery location when requesting a quotation.
What is the price of LC4064B-10T44I?
The current commercial terms for LC4064B-10T44I are handled through the Request a Quote form on this page. Submit the required quantity, packaging preference, and shipment destination to obtain current availability and a formal quotation. Engineers should also specify whether full manufacturer traceability, date code, or a programmed configuration is required when assembling the procurement request.
What is the lead time for LC4064B-10T44I?
The current lead time for LC4064B-10T44I should be confirmed through the Request a Quote form on this page. Include your required quantity and whether an unprogrammed device or factory-programmed configuration is needed. Lifecycle status, component availability, and programming-service capacity can affect the delivery plan, so obtain a written quotation before committing the device to a production schedule.
Is LC4064B-10T44I in stock?
Current stock for LC4064B-10T44I should be checked using the Request a Quote form on this page. Stock status can change independently of the technical lifecycle classification, and programmable-logic demand may be project-specific. Provide the exact quantity and configuration requirements so the supplier can confirm unprogrammed inventory, programmed inventory, or an appropriate manufacturing schedule.
Does LC4064B-10T44I support in-system programming?
The LC4064B-10T44I supports in-system programming at 1.8 V, 2.5 V, and 3.3 V. According to the Lattice Semiconductor datasheet, the device is part of the SuperFAST high-density PLD family and is intended for programmable logic implementations that may require configuration updates after board assembly. Use the manufacturer programming specifications for pin states, setup timing, clock requirements, and security features.

工程参考数据: LC4064B-10T44I ——对比、设计指导和合规信息。

选型指南

Choose the LC4064B-10T44I when an existing board requires the specific ispMACH 4000B architecture, a 44-pin TQFP footprint, 64 macrocells, four logic blocks, and a 10 ns speed class. It is well suited to compact control, interface-conditioning, and protocol-adaptation logic that benefits from in-system programming. Evaluate LC4064B-10TN44I first when a suffix variant can preserve the B-family architecture and all verified pin, timing, and configuration requirements match. Consider LC4064C-10T44I or an LC4064V-family option only after checking logic-cell mapping, programming-file recognition, supply conditions, and AC timing. A matching TQFP outline is necessary but not sufficient: the programmed device identifier, pin behavior, configuration method, and timing tables must also be verified. For new designs, compare the LC4064B against higher-density programmable-logic options when the logic exceeds 64 macrocells, otherwise it provides a compact and established solution.

与替代料对比

参数 本产品 LC4064B-10TN44I LC4064C-10T44I LC4064V-10T44I LC4064V-10TN44I LC4064B-10T44C
Package TQFP-44 TQFP-44 TQFP-44 TQFP-44 TQFP-44 TQFP-44
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Type CPLD CPLD CPLD CPLD CPLD CPLD
Product Family ispMACH 4000B ispMACH 4000B LC4064C family ispMACH 4000V family ispMACH 4000V family ispMACH 4000B family
Maximum Propagation Delay 10 ns 10 ns 10 ns 10 ns 10 ns 10 ns

关键差异点

  • Matches the same 10 ns timing class as the listed same-footprint alternatives (对比 LC4064V-10T44I)
  • Provides 64 macrocells for moderate-density control logic (对比 LC4064C-10T44I)
  • Supports three in-system programming voltage options (对比 LC4064B-10TN44I)

设计说明

Use the manufacturer's 44-pin TQFP land pattern and follow the pin-description table for every power, ground, clock, programming, and user-I/O connection. Place decoupling capacitors at the device supply pins with short return paths to the corresponding ground plane, and avoid routing programming or high-speed external signals beneath the package where they could couple into adjacent inputs.

Treat the 10 ns propagation-delay rating as a device timing parameter rather than a complete system-timing guarantee. External traces, connectors, ground bounce, and input slew can reduce margin. Review the manufacturer AC timing tables, identify the critical paths in the design, and use registered logic or series damping where required to preserve dependable operation in the assembled system.

Do not assume that every 44-terminal LC4064-family ordering code is electrically and programmatically interchangeable with the LC4064B-10T44I. Validate the complete pin names, supply requirements, configuration identifier, logic-cell architecture, timing limits, and programming-file compatibility in the Lattice design environment. After substitution, perform power-up, boundary-scan, functional-pattern, and worst-case timing checks before production release.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

No explicit compliance declaration for the exact MPN appears in the manufacturer or distributor product information.

相关搜索

LC4064B-10T44I datasheet LC4064B-10T44I specifications LC4064B-10T44I pinout LC4064B-10T44I datasheet pdf LC4064B-10T44I equivalent LC4064B-10T44I replacement LC4064B-10T44I footprint LC4064B-10T44I price LC4064B-10T44I stock LC4064B-10T44I vs LC4064V-10T44I Lattice LC4064B-10T44I 64 macrocell 10 ns CPLD

相关元器件 & 术语

Lattice Semiconductor LC4064B-10T44I LC4064B-10TN44I LC4064C-10T44I LC4064V-10T44I LC4064V-10TN44I LC4064B-10T44C ispMACH 4000B CPLD complex programmable logic device PLD programmable logic semiconductor TQFP-44 TQFP package family surface-mount package SMD in-system programming 64 macrocells 4 logic blocks 10 ns propagation delay 30 user I/O pins 1.8 V 2.5 V 3.3 V industrial control logic
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情