LC4064B-10T44I - 64-Macrocell 10 ns CPLD | Lattice Semiconductor
MPN: LC4064B-10T44I ✗ Cuối đờiLC4064B-10T44I Tóm tắt
A CPLD is a programmable logic device that combines nonvolatile configuration storage, programmable logic structures, and user I/O in a single integrated circuit. Within the semiconductor hierarchy, the LC4064B belongs to the complex programmable logic device class, alongside FPGA and CPLD devices used to implement fixed digital functions that can be revised during development or field updates.
The ispMACH 4000B architecture provides four logic blocks and 64 macrocells for moderate-density combinational and sequential logic. Its 10 ns speed designation supports interfaces and control functions operating above the timing range of slower legacy PLDs. Thirty I/O pins provide access to external buses, status signals, and control lines while keeping the device in a compact 44-TQFP package measuring 10 mm by 10 mm.
Programming support for 1.8 V, 2.5 V, and 3.3 V systems enables integration with contemporary mixed-voltage logic. The manufacturer datasheet identifies the LC4064B-10T44I as an in-system programmable SuperFAST high-density PLD, making it suitable for designs where a small logic array must be updated without replacing the assembled board.
Typical uses include industrial control logic, peripheral adapters, legacy bus conditioning, display and instrument interfaces, and compact embedded control systems. The 30 I/O count is particularly useful for bridge functions requiring several data, address, enable, and status signals without moving to a larger programmable-logic package.
PCB design should preserve the package power and ground connectivity specified in the manufacturer datasheet and route programming signals away from sensitive clock or data paths. Because the public product information confirms the 44-terminal TQFP outline but does not reproduce the complete pin-description table, use the manufacturer pinout for every board-level assignment.
This page combines the device architecture, package information, programming interfaces, pin-compatible family alternatives, comparison criteria, and practical application guidance needed to evaluate the LC4064B-10T44I for an existing programmable-logic design.
Bộ thay thế dễ dàng lắp đặt cho LC4064B-10T44I — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với LC4064B-10T44I (cùng hình factor và footprint) — khác nhau ở Speed Grade, Mounting Type, Package, Product Family, Supported Supply Voltages.
LC4064B-10TN44I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064C-10T44I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064V-10T44I
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →LC4064V-10TN44I
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
LC4064B-10T44C
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
LC4064B-10T44I Tỷ lệ tối đa & tính chất điện
| Manufacturer | Lattice Semiconductor Corporation |
| Device Type | Complex programmable logic device (CPLD) |
| Product Family | ispMACH 4000B |
| Architecture | SuperFAST high-density PLD |
| Macrocells | 64 macrocells |
| Logic Blocks | 4 logic blocks |
| Maximum Propagation Delay | 10 ns |
| User I/O Pins | 30 I/O pins |
| Package Type | 44-pin TQFP |
| Package Body Size | 10 mm x 10 mm |
| Total Terminals | 44 terminals |
| Lead Form | Gull wing |
| Kiểu lắp đặt | Surface mount |
| Programmable Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| Internal Supply Voltage Range | 2.3 V to 2.7 V |
| Configuration Method | In-system programmable |
Hướng dẫn cấu hình chân LC4064B-10T44I 10 mm x 10 mm
Cấu hình chân cho LC4064B-10T44I (10 mm x 10 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho LC4064B-10T44I.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
LC4064B-10T44I phù hợp cho 6 Áp dụngs: Industrial Control Logic, Peripheral Bus Adapters, Instrument and Display Interfaces, Portable and Embedded Systems, Network Equipment Line Cards, Security and Surveillance Modules.
Industrial Control Logic
The LC4064B-10T44I fits compact industrial control blocks that combine interlocks, sequencing, alarm logic, and interface conditioning. Its four logic blocks and 64 macrocells provide enough programmable logic for several related control functions without requiring a large FPGA. The 10 ns maximum propagation-delay designation supports faster decision paths than older programmable-logic families, while 30 I/O pins can accommodate discrete sensors, relay-control outputs, status LEDs, and communication signals. In-system programming at 1.8 V, 2.5 V, and 3.3 V also allows configuration updates during commissioning or maintenance without replacing the controller board.
Được đề xuất
Peripheral Bus Adapters
The LC4064B-10T44I can implement protocol translation, command decoding, address decoding, and ready/valid generation between mixed legacy peripherals. With 30 user I/O pins, it can bridge parallel data, control, interrupt, and chip-select signals while leaving programming and dedicated functions to the manufacturer-defined assignments. The 10 ns speed class is useful for short combinational and registered paths in adapter boards, and the 44-pin TQFP outline supports compact interfaces in embedded equipment. In-system programmability makes the adapter suitable for prototypes and deployed products that may require field configuration updates.
Được đề xuất
Instrument and Display Interfaces
The LC4064B-10T44I is appropriate for instrument-panel and display-adapter logic that converts commands and sensor conditions into display-control signals. Four logic blocks and 64 macrocells can organize timing, counters, encoders, and display-enable functions, while 30 I/O pins provide connections to display modules, buttons, indicators, and a host processor. The 10 ns propagation-delay rating supports common control paths, and the 10 mm by 10 mm TQFP package simplifies routing on densely populated instrument boards. Programmable configuration is especially useful when panel interfaces differ between product variants or require post-deployment adjustments.
Được đề xuất
Portable and Embedded Systems
The LC4064B-10T44I can serve as a compact programmable-logic companion in portable instruments, sensor modules, and embedded accessories where the host processor needs deterministic interface assistance. Its 44-pin TQFP package provides 30 user I/O pins for low-speed communication, status, and control paths without requiring the larger footprint of a high-density FPGA. The 10 ns speed designation helps preserve timing margins in short control loops, while 1.8 V, 2.5 V, and 3.3 V in-system programming options support integration with multiple logic-voltage domains. Its reprogrammability allows interface revisions without a board respin.
Được đề xuất
Network Equipment Line Cards
The LC4064B-10T44I is useful in network-interface and line-card designs that require local status decoding, control-signal conditioning, or fault-logic coordination. The 30 available I/O pins can support multiple interface flags, enables, interrupt inputs, and diagnostic outputs, while the 10 ns speed class handles fast local control paths around a host processor. In-system programming permits configuration changes for different board revisions or field diagnostics without changing the PCB. A 44-pin TQFP also allows the logic to fit beside high-density communication processors without introducing a large package into the line card.
Được đề xuất
Security and Surveillance Modules
The LC4064B-10T44I can implement local timing, alarm, trigger, and output-control functions in compact surveillance equipment. Four logic blocks and 64 macrocells are suitable for coordinating sensor inputs, motion-enable signals, relay drivers, status indicators, and host interrupts without monopolizing a main processor. The 10 ns timing class supports rapid propagation through short control paths, and 30 I/O pins leave sufficient connectivity for several discrete surveillance functions. In-system programmability supports product variants and field configuration, although designers should use the manufacturer security guidance when protecting configuration data or implementing authenticated updates.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho LC4064B-10T44I — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | LC4064B-10TN44I | LC4064C-10T44I | LC4064V-10T44I | LC4064V-10TN44I | LC4064B-10T44C |
|---|---|---|---|---|---|---|
| Package | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 | TQFP-44 |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | CPLD | CPLD | CPLD | CPLD | CPLD | CPLD |
| Product Family | ispMACH 4000B | ispMACH 4000B | LC4064C family | ispMACH 4000V family | ispMACH 4000V family | ispMACH 4000B family |
| Maximum Propagation Delay | 10 ns | 10 ns | 10 ns | 10 ns | 10 ns | 10 ns |
Bảo phân biệt quan trọng
- Matches the same 10 ns timing class as the listed same-footprint alternatives (vsLC4064V-10T44I)
- Provides 64 macrocells for moderate-density control logic (vsLC4064C-10T44I)
- Supports three in-system programming voltage options (vsLC4064B-10TN44I)
Ghi chú thiết kế
Use the manufacturer's 44-pin TQFP land pattern and follow the pin-description table for every power, ground, clock, programming, and user-I/O connection. Place decoupling capacitors at the device supply pins with short return paths to the corresponding ground plane, and avoid routing programming or high-speed external signals beneath the package where they could couple into adjacent inputs.
Treat the 10 ns propagation-delay rating as a device timing parameter rather than a complete system-timing guarantee. External traces, connectors, ground bounce, and input slew can reduce margin. Review the manufacturer AC timing tables, identify the critical paths in the design, and use registered logic or series damping where required to preserve dependable operation in the assembled system.
Do not assume that every 44-terminal LC4064-family ordering code is electrically and programmatically interchangeable with the LC4064B-10T44I. Validate the complete pin names, supply requirements, configuration identifier, logic-cell architecture, timing limits, and programming-file compatibility in the Lattice design environment. After substitution, perform power-up, boundary-scan, functional-pattern, and worst-case timing checks before production release.
Thông tin tuân thủ
No explicit compliance declaration for the exact MPN appears in the manufacturer or distributor product information.