LC4256V-5T100I - 256-Macro CPLD, 100-TQFP | Lattice
部品番号: LC4256V-5T100I ✗ 生産終了LC4256V-5T100I 概要
A CPLD is a user-programmable logic device that combines programmable interconnect, macro logic, and nonvolatile configuration memory in one package. Its place in the hardware hierarchy is FPGA and CPLD > programmable logic > digital semiconductor. Unlike an FPGA, a CPLD is typically used for deterministic glue logic, control functions, bus arbitration, interface adaptation, and other designs that benefit from compact configuration storage and predictable routing.
The LC4256V family is identified as an in-system-programmable SuperFAST high-density PLD. Its three supported operating voltages allow a board design to accommodate systems operating from 3.3 V, 2.5 V, or 1.8 V. The industrial temperature suffix identifies the LC4256V-5T100I as an industrial-grade configuration, while the -5 designator distinguishes it from other speed or family variants within the ispMACH 4000V portfolio.
Its 256 macro cells make the device appropriate for consolidating multiple fixed-format logic blocks into one programmable component. Typical designs can implement state machines, address and data-path control, protocol bridges, peripheral interface logic, and board-level sequencing. The 100-pin TQFP package provides a higher pin count than smaller CPLD packages and is useful when a design requires numerous external connections or distributed power and ground pins.
In-System Programming supports configuration by an external programming system without a separate standalone programming socket. This can simplify manufacturing, prototype updates, and field reconfiguration workflows. Nevertheless, designers must follow the manufacturer's programming and power-up sequence because the configuration logic and I/O behavior during startup are part of the device's system-level electrical design.
The main replacement consideration is not merely package similarity. A drop-in candidate must use the same 100-pin TQFP land pattern, preserve compatible power and ground connections, retain usable I/O standards, and provide adequate timing performance for the target design. Speed-grade, device-family, temperature-grade, and logic-resource differences should be reviewed before approving any substitution.
This product page consolidates lifecycle information, package details, verified technical characteristics, drop-in candidates, comparison parameters, and practical CPLD design guidance. It also highlights where pin-compatible options differ in speed class or family architecture so engineers can make a controlled replacement decision rather than relying only on a matching package designation.
ドロップイン代替品: LC4256V-5T100I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LC4256V-5T100I (同一形状・フットプリント) — 相違点: Device Type.
LC4256V-75T100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4256C-5T100I
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4256B-5T100I
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4256ZC-75T100C
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4256V-5TN100I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4256V-5T100I 最大定格&電気的特性
| Device Type | In-System Programmable SuperFAST High-Density PLD |
| Programmable Logic Family | ispMACH 4000V |
| Macro Cell Count | 256 macro cells |
| Maximum System Frequency | 227 MHz |
| Supply Voltage Options | 3.3 V / 2.5 V / 1.8 V |
| Device Speed Designator | -5 |
| Temperature Grade | Industrial |
| Package Type | 100-pin TQFP |
| 実装タイプ | Surface mount |
| Programming Method | In-System Programmable |
LC4256V-5T100I 100-pin tqfp ピン配置ガイド
LC4256V-5T100I (100-pin tqfp パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LC4256V-5T100I.
詳細は データシート をご参照ください。
主な用途
LC4256V-5T100I の用途: 6 件s: Industrial Control Logic, Peripheral Interface Bridging, Communication Equipment Control Plane, Programmable Test and Measurement Logic, Data Storage Interface Control, Security and Access Control Logic.
Industrial Control Logic
The LC4256V-5T100I suits industrial control boards that need deterministic programmable logic for sequencing, interlocks, state machines, and peripheral coordination. Its 256 macro cells provide meaningful logic density for consolidating control functions, while the 100-pin TQFP package offers ample connections for field inputs and actuator outputs. The manufacturer identifies the device as an industrial-grade, in-system-programmable CPLD supporting 3.3 V, 2.5 V, and 1.8 V operation. During design review, verify the exact temperature range and required I/O voltage combinations in the manufacturer datasheet, and ensure every external signal remains within the selected I/O standard.
おすすめ
Peripheral Interface Bridging
The LC4256V-5T100I can bridge dissimilar bus widths, translate control signals, or implement protocol-specific framing on compact embedded systems. Its 256 macro cells allow substantial logic to be integrated without a larger FPGA, and the 227 MHz system-frequency rating supports general control and data-path tasks. The 100-pin TQFP package provides sufficient package density for parallel interfaces and multiple chip-select outputs. Designers should use the manufacturer pin-description tables to confirm signal availability, and should treat the stated frequency as a device-level figure rather than a guaranteed endpoint rate for every routed path.
おすすめ
Communication Equipment Control Plane
The LC4256V-5T100I is appropriate for communication equipment that separates a low-speed control plane from a high-speed datapath. Implementers can assign counters, command decoders, status registers, interrupt logic, and backpressure controls to the 256 available macro cells. Its in-system-programming capability simplifies manufacturing fixtures and controlled firmware updates, while 3.3 V, 2.5 V, and 1.8 V support can simplify multi-voltage board integration. The CPLD should remain within its documented timing and I/O limits, and any replacement must preserve pin behavior as well as nominal package compatibility.
おすすめ
Programmable Test and Measurement Logic
The LC4256V-5T100I can implement instrumentation control, trigger generation, sequencing, and interface adaptation in a compact test system. Its 256 macro cells support more elaborate control logic than a small generic glue-logic device, and the 100-pin TQFP package provides numerous external pins for stimulus routing and status capture. In-System Programming permits repeatable configuration during fixture setup or calibration workflows. Engineers should validate propagation delay, I/O standards, and clock-domain assumptions against the manufacturer timing tables, especially if a replacement uses the -75 timing designation.
おすすめ
Data Storage Interface Control
The LC4256V-5T100I can implement command sequencing, chip-select generation, bus arbitration, and error-handling logic around data-storage devices. Its 256 macro cells allow multiple controller functions to be consolidated, reducing the need for separate glue-logic packages. The 100-pin TQFP format accommodates the control and data connections associated with compact embedded storage systems. For reliable implementation, confirm the usable I/O count, voltage tolerances, and timing relationship with the storage component; a same-footprint replacement should not be approved without a pin-by-pin signal review.
おすすめ
Security and Access Control Logic
The LC4256V-5T100I can implement secure command decoders, lock sequencing, access timers, tamper-response logic, and peripheral-enable control in industrial or embedded systems. Its 256 macro cells provide enough capacity for layered state machines, and the 227 MHz headline rating is suitable for many control-plane tasks. In-System Programming supports controlled provisioning during production or maintenance. Security designs should not depend on undocumented behavior: use the manufacturer pin and programming documentation, protect configuration access as required, and verify that a proposed replacement preserves every control signal and timing requirement.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LC4256V-5T100I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LC4256V-75T100I | LC4256C-5T100I | LC4256B-5T100I | LC4256ZC-75T100C | LC4256V-5TN100I |
|---|---|---|---|---|---|---|
| Package | 100-pin TQFP | 100-pin TQFP - same | 100-pin TQFP - same | 100-pin TQFP - same | 100-pin TQFP - same | 100-pin TQFP - same |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | ispMACH 4000V high-density CPLD | ispMACH 4000V high-density CPLD | CPLD | ispMACH 4000B high-density CPLD | LC4256Z high-density CPLD | ispMACH 4000V high-density CPLD |
| Speed Designation | -5 | -75 | -5 | -5 | -75 | -5 |
主な差別化要因
- Faster -5 timing designation within the legacy family (vs LC4256V-75T100I)
- Identified 256-macro-cell ispMACH 4000V architecture (vs LC4256B-5T100I)
- Broader documented multi-voltage support (vs LC4256ZC-75T100C)
- Documented 227 MHz system-frequency rating (vs LC4256C-5T100I)
設計ノート
Do not approve a replacement solely because both devices use a 100-pin TQFP package. Check every power pin, ground pin, configuration pin, clock input, and user I/O against the manufacturer pin-description tables. In particular, the -75 timing designation may require additional timing margin, while changes among the V, B, C, and Z families can alter resources, voltage options, or I/O behavior. Re-run synthesis, place-and-route, timing analysis, and a pin-level comparison before releasing the replacement to production.
Preserve the original land pattern, pin-one orientation, and solder-paste geometry unless the manufacturer package drawing confirms that the alternative has identical dimensions and terminal construction. A 100-pin TQFP designation alone does not prove mechanical interchangeability. Route programming and configuration signals away from high-speed or switching nodes, maintain the specified decoupling topology, and provide a stable supply before configuration begins. A hardware substitution should also be checked for thermal-pad differences and assembly-profile changes.
Design the board around the selected 3.3 V, 2.5 V, or 1.8 V operating mode and use only the I/O standards explicitly supported for that configuration. Place the required input and bypass capacitors close to the device power pins, with placement and values taken from the manufacturer reference circuit and power-supply recommendations. Account for startup current, in-system-programming behavior, and any rail-sequencing requirements. Estimated: total decoupling and quiescent-current effects must be calculated from the actual schematic and device operating mode before assigning capacitor tolerances.
Apply the manufacturer timing constraints to every clock, configuration, and I/O path rather than relying on the 227 MHz headline value as a universal operating frequency. The -5 and -75 speed designations represent distinct timing classes, and a nominal package match does not preserve equivalent setup and hold margins. Use registered or properly constrained logic for high-speed paths, check clock-domain crossings, and validate board-level signal integrity with the intended edge rates and loading. If the original design has little timing margin, the -75 option may require redesign.
コンプライアンス情報
The indexed material identifies an industrial-grade LC4256V device but does not establish the requested compliance declarations. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the manufacturer or the exact legacy documentation before procurement.