Lattice Semiconductor

LC4256V-5T100I - 256-Macro CPLD, 100-TQFP | Lattice

料号: LC4256V-5T100I ✗ 停产
3.3 V / 2.5 V / 1.8 V Vdss 100-pin TQFP Package 227 MHz Speed
最小起订量: 1 |

LC4256V-5T100I 概述

The Lattice Semiconductor LC4256V-5T100I is a discontinued, in-system-programmable Complex Programmable Logic Device with 256 macro cells, a 100-pin TQFP package, and support for 3.3 V, 2.5 V, and 1.8 V operation. It belongs to the ispMACH 4000V high-density PLD family and provides a 227 MHz maximum system frequency rating for the shown device configuration.

A CPLD is a user-programmable logic device that combines programmable interconnect, macro logic, and nonvolatile configuration memory in one package. Its place in the hardware hierarchy is FPGA and CPLD > programmable logic > digital semiconductor. Unlike an FPGA, a CPLD is typically used for deterministic glue logic, control functions, bus arbitration, interface adaptation, and other designs that benefit from compact configuration storage and predictable routing.

The LC4256V family is identified as an in-system-programmable SuperFAST high-density PLD. Its three supported operating voltages allow a board design to accommodate systems operating from 3.3 V, 2.5 V, or 1.8 V. The industrial temperature suffix identifies the LC4256V-5T100I as an industrial-grade configuration, while the -5 designator distinguishes it from other speed or family variants within the ispMACH 4000V portfolio.

Its 256 macro cells make the device appropriate for consolidating multiple fixed-format logic blocks into one programmable component. Typical designs can implement state machines, address and data-path control, protocol bridges, peripheral interface logic, and board-level sequencing. The 100-pin TQFP package provides a higher pin count than smaller CPLD packages and is useful when a design requires numerous external connections or distributed power and ground pins.

In-System Programming supports configuration by an external programming system without a separate standalone programming socket. This can simplify manufacturing, prototype updates, and field reconfiguration workflows. Nevertheless, designers must follow the manufacturer's programming and power-up sequence because the configuration logic and I/O behavior during startup are part of the device's system-level electrical design.

The main replacement consideration is not merely package similarity. A drop-in candidate must use the same 100-pin TQFP land pattern, preserve compatible power and ground connections, retain usable I/O standards, and provide adequate timing performance for the target design. Speed-grade, device-family, temperature-grade, and logic-resource differences should be reviewed before approving any substitution.

This product page consolidates lifecycle information, package details, verified technical characteristics, drop-in candidates, comparison parameters, and practical CPLD design guidance. It also highlights where pin-compatible options differ in speed class or family architecture so engineers can make a controlled replacement decision rather than relying only on a matching package designation.

直接替换替代料: LC4256V-5T100I ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。

本系列中的变体

可与以下型号直接替换的同系列型号: LC4256V-5T100I (相同外形与封装尺寸) ——差异在于 Device Type.

Lattice Semiconductor
Device Type: Complex Programmable Logic Device (CPLD)
对比 LC4256V-5T100I →

LC4256V-75T100I

✅ 直接替换
📦 100-pin TQFP
Timing designation changes from -5 to -75; package remains 100-pin TQFP

📋 参考替代料(不在目录中)

LC4256C-5T100I

✅ 直接替换
Lattice Semiconductor
📦 100-pin TQFP
Complex Programmable Logic Device (CPLD) · ispMACH 4000C · 256 macrocells · 227 MHz · 5 ns · 1.8 V · 1.65 V to 1.95 V · 1.8 V, 2.5 V, and 3.3 V

联系询价

查看数据手册 →

LC4256B-5T100I

✅ 直接替换
Lattice Semiconductor
📦 100-pin TQFP
ispMACH 4000B complex programmable logic device · 256 macrocells · 16 logic elements · 5 ns · 64 I/O pins · 2.3 V to 2.7 V · 3.3 V, 2.5 V, and 1.8 V · In-system programmable

联系询价

查看数据手册 →

LC4256ZC-75T100C

✅ 直接替换
📦 100-pin TQFP
Timing designation changes from -5 to -75 and the alternative is identified with 64 I/O

📋 参考替代料(不在目录中)

LC4256V-5TN100I

✅ 直接替换
📦 100-pin TQFP
Adds the N ordering suffix while retaining the -5 timing class and 100-pin TQFP package

📋 参考替代料(不在目录中)

LC4256V-5T100I 最大额定值与电气特性

Device Type In-System Programmable SuperFAST High-Density PLD
Programmable Logic Family ispMACH 4000V
Macro Cell Count 256 macro cells
Maximum System Frequency 227 MHz
Supply Voltage Options 3.3 V / 2.5 V / 1.8 V
Device Speed Designator -5
Temperature Grade Industrial
Package Type 100-pin TQFP
安装类型 Surface mount
Programming Method In-System Programmable

LC4256V-5T100I 100-pin tqfp 引脚配置指南

LC4256V-5T100I(100-pin tqfp 封装)的引脚配置。 该数字 IC 包含 GPIO、通信接口(UART、SPI、I2C)和电源引脚。请参阅制造商数据手册以了解复用引脚功能和配置选项。对嵌入式系统设计和 PCB 布局至关重要。

LC4256V-5T100I 的 100-pin tqfp 封装引脚图

暂无详细引脚数据: LC4256V-5T100I.

请参阅 数据手册 以查看完整引脚配置。

典型应用

LC4256V-5T100I 适用于 6 应用s: Industrial Control Logic, Peripheral Interface Bridging, Communication Equipment Control Plane, Programmable Test and Measurement Logic, Data Storage Interface Control, Security and Access Control Logic.

🏭

Industrial Control Logic

The LC4256V-5T100I suits industrial control boards that need deterministic programmable logic for sequencing, interlocks, state machines, and peripheral coordination. Its 256 macro cells provide meaningful logic density for consolidating control functions, while the 100-pin TQFP package offers ample connections for field inputs and actuator outputs. The manufacturer identifies the device as an industrial-grade, in-system-programmable CPLD supporting 3.3 V, 2.5 V, and 1.8 V operation. During design review, verify the exact temperature range and required I/O voltage combinations in the manufacturer datasheet, and ensure every external signal remains within the selected I/O standard.

🔧

Peripheral Interface Bridging

The LC4256V-5T100I can bridge dissimilar bus widths, translate control signals, or implement protocol-specific framing on compact embedded systems. Its 256 macro cells allow substantial logic to be integrated without a larger FPGA, and the 227 MHz system-frequency rating supports general control and data-path tasks. The 100-pin TQFP package provides sufficient package density for parallel interfaces and multiple chip-select outputs. Designers should use the manufacturer pin-description tables to confirm signal availability, and should treat the stated frequency as a device-level figure rather than a guaranteed endpoint rate for every routed path.

🌐

Communication Equipment Control Plane

The LC4256V-5T100I is appropriate for communication equipment that separates a low-speed control plane from a high-speed datapath. Implementers can assign counters, command decoders, status registers, interrupt logic, and backpressure controls to the 256 available macro cells. Its in-system-programming capability simplifies manufacturing fixtures and controlled firmware updates, while 3.3 V, 2.5 V, and 1.8 V support can simplify multi-voltage board integration. The CPLD should remain within its documented timing and I/O limits, and any replacement must preserve pin behavior as well as nominal package compatibility.

⚡

Programmable Test and Measurement Logic

The LC4256V-5T100I can implement instrumentation control, trigger generation, sequencing, and interface adaptation in a compact test system. Its 256 macro cells support more elaborate control logic than a small generic glue-logic device, and the 100-pin TQFP package provides numerous external pins for stimulus routing and status capture. In-System Programming permits repeatable configuration during fixture setup or calibration workflows. Engineers should validate propagation delay, I/O standards, and clock-domain assumptions against the manufacturer timing tables, especially if a replacement uses the -75 timing designation.

🖥️

Data Storage Interface Control

The LC4256V-5T100I can implement command sequencing, chip-select generation, bus arbitration, and error-handling logic around data-storage devices. Its 256 macro cells allow multiple controller functions to be consolidated, reducing the need for separate glue-logic packages. The 100-pin TQFP format accommodates the control and data connections associated with compact embedded storage systems. For reliable implementation, confirm the usable I/O count, voltage tolerances, and timing relationship with the storage component; a same-footprint replacement should not be approved without a pin-by-pin signal review.

🧩

Security and Access Control Logic

The LC4256V-5T100I can implement secure command decoders, lock sequencing, access timers, tamper-response logic, and peripheral-enable control in industrial or embedded systems. Its 256 macro cells provide enough capacity for layered state machines, and the 227 MHz headline rating is suitable for many control-plane tasks. In-System Programming supports controlled provisioning during production or maintenance. Security designs should not depend on undocumented behavior: use the manufacturer pin and programming documentation, protect configuration access as required, and verify that a proposed replacement preserves every control signal and timing requirement.

推荐产品汇总

LC4256V-75T100I Same-family package-compatible timing option 用于: Industrial Control Logic, Communication Equipment Control Plane, Programmable Test and Measurement Logic LC4256B-5T100I Lattice Semiconductor 用于: Industrial Control Logic, Programmable Test and Measurement Logic, Security and Access Control Logic LC4256C-5T100I Lattice Semiconductor 用于: Peripheral Interface Bridging, Data Storage Interface Control LC4256ZC-75T100C 64-I/O family option with a different timing designation 用于: Peripheral Interface Bridging, Data Storage Interface Control LC4256V-5TN100I Same-family ordering option requiring suffix verification 用于: Communication Equipment Control Plane, Security and Access Control Logic
What is the LC4256V-5T100I?
The LC4256V-5T100I is a Lattice Semiconductor ispMACH 4000V in-system-programmable high-density CPLD with 256 macro cells in a 100-pin TQFP package. According to the Lattice Semiconductor manufacturer datasheet, it is a SuperFAST programmable logic device supporting 3.3 V, 2.5 V, and 1.8 V operation. It is intended for industrial-temperature designs requiring compact, nonvolatile programmable logic for control, interface, and state-machine functions.
Is the LC4256V-5T100I active or discontinued?
The LC4256V-5T100I is discontinued and remains a legacy sourcing item rather than a current new-design choice. The product listing identifies the device as an industrial ispMACH 4000V CPLD with discontinued status. For new designs, evaluate current Lattice programmable-logic families first; for an existing PCB, use the Request a Quote form on this page to request availability, condition, and lead-time information.
What is the maximum frequency of the LC4256V-5T100I?
The LC4256V-5T100I is rated for a maximum system frequency of 227 MHz in the identified device configuration. According to the Lattice Semiconductor manufacturer datasheet, this frequency is the headline speed value associated with the -5 device and should not be treated as a guaranteed performance level for every implemented design. Actual timing depends on the selected logic path, I/O standard, speed grade, and system constraints.
What package and mounting style does the LC4256V-5T100I use?
The LC4256V-5T100I uses a surface-mount 100-pin TQFP package. The manufacturer datasheet describes a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD, while distributor documentation identifies the 100-pin TQFP configuration. Before substituting a device, confirm land-pattern dimensions, exposed versus non-exposed pad construction, pin orientation, and all power and ground assignments.
Which operating voltages are supported by the LC4256V-5T100I?
The LC4256V-5T100I supports 3.3 V, 2.5 V, and 1.8 V operating configurations. According to the Lattice Semiconductor manufacturer datasheet, these are core supply-voltage options for the ispMACH 4000V family. The selected voltage also affects compatible I/O standards and board-level interfaces, so engineers should review the device pin-description and electrical-characteristics tables before connecting external signals.
Where can I download the LC4256V-5T100I datasheet PDF?
The LC4256V-5T100I datasheet PDF is available through the Lattice Semiconductor documentation link and the indexed manufacturer-document pages listed on this page. According to the Lattice Semiconductor manufacturer datasheet, the document covers the ispMACH 4000V family, including the 256-macro-cell device, supported voltages, package information, timing, and programming details. Use the manufacturer document as the controlling source for pinout and electrical limits.
Where can I find the LC4256V-5T100I pinout?
The LC4256V-5T100I pinout is found in the pin-description and package diagrams in the Lattice Semiconductor manufacturer datasheet. The device is a 100-pin TQFP package, but a complete numbered pin list is not reproduced on this page because the indexed material does not expose every terminal name reliably. Use the manufacturer pin-description table when assigning PCB tracks and confirm programming, configuration, clock, I/O, power, and ground pins.
What is the best drop-in replacement for the LC4256V-5T100I?
The strongest replacement candidate is the LC4256V-75T100I because it retains the LC4256V family and 100-pin TQFP arrangement while changing the timing designation from -5 to -75. According to the Lattice Semiconductor family documentation and indexed cross-reference results, it is the closest listed family member. It is not a universal substitute: timing-critical paths, I/O behavior, resource usage, and the original programming file must be revalidated before approval.
Can the LC4256V-5TN100I replace the LC4256V-5T100I?
The LC4256V-5TN100I can be considered only after its full ordering code and package construction are matched against the original. Both parts are indexed under the LC4256V-5 speed designation and 100-pin TQFP family, but the N suffix may encode a commercial versus industrial temperature option or another ordering attribute. According to the Lattice Semiconductor ordering documentation, confirm the exact suffix, grade, and package details before treating it as a drop-in replacement.
LC4256V-5T100I vs LC4256V-75T100I — which is better for timing-critical logic?
The LC4256V-5T100I is the better starting point for timing-critical logic because its -5 designation identifies the faster device class, whereas the LC4256V-75T100I uses the -75 timing class. According to the Lattice Semiconductor family documentation, the -75 option can require additional timing margin and may not satisfy the same design targets. Both retain the 100-pin TQFP package, but the replacement must be revalidated against the worst-case system timing.
What is the difference between LC4256V-5T100I and LC4256C-5T100I?
Both devices use the -5 timing designation and 100-pin TQFP package, but the family letter changes from V to C. According to the indexed Lattice cross-reference material, LC4256C-5T100I is a closely related CPLD candidate, while the LC4256V family is identified as a 256-macro-cell ispMACH 4000V device. Exact I/O, voltage, timing, and configuration compatibility must be checked in the manufacturer datasheet before treating the family change as drop-in compatible.
When should I choose the LC4256V-5T100I over an LC4256B-5T100I?
Choose the LC4256V-5T100I when the original design specifically depends on the V-family 256-macro-cell architecture, its 3.3 V, 2.5 V, and 1.8 V operating options, or its documented 227 MHz system-frequency rating. The LC4256B-5T100I appears in indexed family comparisons, but the B family may differ internally. According to the Lattice Semiconductor manufacturer datasheet, compare logic resources, I/O standards, timing, and pin assignment before selecting either device.
Is the LC4256V-5T100I suitable for industrial control and interface logic?
The LC4256V-5T100I is identified as an industrial-grade ispMACH 4000V CPLD with 256 macro cells and a 100-pin TQFP package. Its 227 MHz headline frequency and in-system programmability make it suitable for board-level control, peripheral interfacing, bus arbitration, and state-machine implementations. According to the Lattice Semiconductor manufacturer datasheet, verify the exact temperature limits, I/O voltage combinations, and timing constraints for the deployed industrial environment.
How should programmers handle configuration of the LC4256V-5T100I?
Program the LC4256V-5T100I through the programming interface specified in the Lattice Semiconductor manufacturer datasheet, following its required power, clock, and control sequence. Because the device is in-system programmable, configuration can be integrated into manufacturing or update fixtures instead of requiring a dedicated programming socket. The device family supports 3.3 V, 2.5 V, and 1.8 V operation, so the programmer voltage and I/O levels must match the selected board configuration.
What are the key specifications of LC4256V-5T100I that engineers should know?
The key LC4256V-5T100I specifications are 256 macro cells, a 227 MHz maximum system-frequency rating, 3.3 V, 2.5 V, and 1.8 V operating options, in-system programmability, an industrial temperature designation, and a 100-pin TQFP package. According to the Lattice Semiconductor manufacturer datasheet, it belongs to the SuperFAST ispMACH 4000V high-density PLD family. These attributes make it relevant for compact, deterministic control and interface logic rather than general-purpose processor workloads.
Where can I request a quote and lead time for LC4256V-5T100I?
Request a quote and current lead time for the LC4256V-5T100I through the Request a Quote form on this page. The part is a discontinued catalog item, so condition, traceability, quantity, and delivery timing should be confirmed for the exact ordering code. The LC4256V-5T100I appears in current distributor indexes, but no explicit quantity-break price or firm inventory commitment is established on this product page.

工程参考数据: LC4256V-5T100I ——对比、设计指导和合规信息。

选型指南

Choose the LC4256V-5T100I when maintaining an existing design requires its original 4000V architecture, 256 macro cells, -5 timing class, 227 MHz headline rating, and multi-voltage support. LC4256V-75T100I is the most direct same-family replacement when the board can tolerate slower timing; review every clock and I/O constraint because the designation changes from -5 to -75. Consider LC4256C-5T100I or LC4256B-5T100I only after confirming their resources, I/O standards, pin behavior, and programming compatibility. LC4256ZC-75T100C may suit a 1.8 V design with 64 I/O, but its different family and timing class make it a less direct choice. No cross-brand candidate was established, so the most defensible path is to qualify one of these same-manufacturer devices through pin, timing, resource, and environmental checks.

与替代料对比

参数 本产品 LC4256V-75T100I LC4256C-5T100I LC4256B-5T100I LC4256ZC-75T100C LC4256V-5TN100I
Package 100-pin TQFP 100-pin TQFP - same 100-pin TQFP - same 100-pin TQFP - same 100-pin TQFP - same 100-pin TQFP - same
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Type ispMACH 4000V high-density CPLD ispMACH 4000V high-density CPLD CPLD ispMACH 4000B high-density CPLD LC4256Z high-density CPLD ispMACH 4000V high-density CPLD
Speed Designation -5 -75 -5 -5 -75 -5

关键差异点

  • Faster -5 timing designation within the legacy family (对比 LC4256V-75T100I)
  • Identified 256-macro-cell ispMACH 4000V architecture (对比 LC4256B-5T100I)
  • Broader documented multi-voltage support (对比 LC4256ZC-75T100C)
  • Documented 227 MHz system-frequency rating (对比 LC4256C-5T100I)

设计说明

Do not approve a replacement solely because both devices use a 100-pin TQFP package. Check every power pin, ground pin, configuration pin, clock input, and user I/O against the manufacturer pin-description tables. In particular, the -75 timing designation may require additional timing margin, while changes among the V, B, C, and Z families can alter resources, voltage options, or I/O behavior. Re-run synthesis, place-and-route, timing analysis, and a pin-level comparison before releasing the replacement to production.

Preserve the original land pattern, pin-one orientation, and solder-paste geometry unless the manufacturer package drawing confirms that the alternative has identical dimensions and terminal construction. A 100-pin TQFP designation alone does not prove mechanical interchangeability. Route programming and configuration signals away from high-speed or switching nodes, maintain the specified decoupling topology, and provide a stable supply before configuration begins. A hardware substitution should also be checked for thermal-pad differences and assembly-profile changes.

Design the board around the selected 3.3 V, 2.5 V, or 1.8 V operating mode and use only the I/O standards explicitly supported for that configuration. Place the required input and bypass capacitors close to the device power pins, with placement and values taken from the manufacturer reference circuit and power-supply recommendations. Account for startup current, in-system-programming behavior, and any rail-sequencing requirements. Estimated: total decoupling and quiescent-current effects must be calculated from the actual schematic and device operating mode before assigning capacitor tolerances.

Apply the manufacturer timing constraints to every clock, configuration, and I/O path rather than relying on the 227 MHz headline value as a universal operating frequency. The -5 and -75 speed designations represent distinct timing classes, and a nominal package match does not preserve equivalent setup and hold margins. Use registered or properly constrained logic for high-speed paths, check clock-domain crossings, and validate board-level signal integrity with the intended edge rates and loading. If the original design has little timing margin, the -75 option may require redesign.

合规信息

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
无铅
Unknown
无卤
Unknown
冲突矿物
Unknown

The indexed material identifies an industrial-grade LC4256V device but does not establish the requested compliance declarations. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status from the manufacturer or the exact legacy documentation before procurement.

相关搜索

lc4256v datasheet LC4256V-5T100I datasheet LC4256V-5T100I pinout LC4256V-5T100I 100-pin TQFP LC4256V-5T100I 256 macro cells LC4256V-5T100I 227 MHz LC4256V-5T100I equivalent LC4256V-5T100I replacement LC4256V-5T100I vs LC4256V-75T100I Lattice LC4256V-5T100I CPLD LC4256V-5T100I in-system programmable LC4256V-5T100I price

相关元器件 & 术语

Lattice Semiconductor LC4256V-5T100I LC4256V-75T100I LC4256C-5T100I LC4256B-5T100I LC4256ZC-75T100C LC4256V-5TN100I ispMACH 4000V CPLD Complex Programmable Logic Device FPGA and CPLD Programmable Logic Device In-System Programming SuperFAST 256 macro cells 227 MHz 3.3 V 2.5 V 1.8 V 100-pin TQFP TQFP package family surface-mount package industrial-temperature grade digital logic state-machine logic
快速报价
填写完整信息——我们的销售团队将在 24 小时内回复
料号 制造商 封装 QTY 目标价 小计
✓
报价已提交!

我们将在 24 小时内回复您的邮件

1
询价已提交
2
已收到报价
3
已下单
4
支付
5
已发货
6
已送达
查看询价详情