Lattice Semiconductor

LC4256C-5T100I - 256-Macrocell 227MHz CPLD | Lattice

部品番号: LC4256C-5T100I ✓ 生産中
1.8 V Vdss 100-pin TQFP Package 227 MHz Speed
MOQ: 1 |

LC4256C-5T100I 概要

Lattice Semiconductor LC4256C-5T100I is a 256-macrocell complex programmable logic device operating at up to 227 MHz, supplied in a 100-pin TQFP package measuring 14 x 14 mm. It belongs to the ispMACH 4000C family and provides a 5 ns speed grade for designs requiring deterministic, non-volatile programmable logic with 1.8 V core operation.

A complex programmable logic device, or CPLD, is a programmable-logic category that combines multiple programmable logic blocks with a deterministic interconnect structure. A CPLD sits between simple programmable logic arrays and larger FPGAs: it offers more integrated logic capacity and deterministic timing than basic PAL-type devices while generally using less routing flexibility and capacity than an FPGA. The LC4256C-5T100I is therefore positioned for control, interface, glue-logic, and signal-processing functions where repeatable timing and in-system programmability are important.

The device provides 256 macrocells and a nominal 227 MHz maximum operating frequency. Its 5 ns speed designation identifies the -5 performance grade, while the I suffix identifies the industrial-temperature option. The core supply is 1.8 V, with an internal operating range of 1.65 V to 1.95 V, and the device supports 1.8 V, 2.5 V, and 3.3 V in-system-programmable families. Up to four global clock pins with programmable clock polarity support multi-clock control logic and registered clock-domain designs.

Technically, the ispMACH architecture provides predictable propagation behavior without external memory for configuration. The 5 ns grade is appropriate for high-speed interface decoding, state-machine control, bus arbitration, and peripheral glue logic. Because CPLD timing is characterized by fixed architecture-level paths, engineers can use the device for latency-sensitive control paths where an FPGA soft core would add unnecessary complexity, configuration overhead, and resource cost.

Typical uses include industrial controller interfaces, communications equipment, instrumentation, embedded peripheral control, and general-purpose logic consolidation. The 100-pin TQFP provides 64 I/O according to the device-family information while leaving dedicated supply, configuration, clock, and ground resources. The industrial temperature range of -40°C to 105°C for junction temperature makes the part suitable for factory, telecommunications, and commercial equipment requiring extended environmental operation.

Designers should verify every pin assignment and power configuration against the manufacturer pin table before layout. The 1.8 V core and in-system-programming interface require correct pin assignment, decoupling, and programming-signal compatibility. This page also consolidates package details, verified alternatives, comparison parameters, application guidance, and practical design considerations into one engineering reference.

The LC4256C-5T100I is best considered when a design needs more deterministic logic than simple combinational devices, more simplicity than a large FPGA, and a 100-pin industrial package. For new designs, confirm device availability and qualification status with XAIPART before committing the footprint to production.

ドロップイン代替品: LC4256C-5T100I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LC4256C-5T100I (同一形状・フットプリント) — 相違点: Device Type.

Lattice Semiconductor
Device Type: Complex programmable logic device
比較対象 LC4256C-5T100I →
Lattice Semiconductor
Device Type: In-System Programmable SuperFAST High-Density PLD
比較対象 LC4256C-5T100I →

LC4256C-5TN100I

✅ ドロップイン
📦 TQFP-100 (14 x 14 mm)
Same 5 ns speed grade and 100-pin TQFP footprint; ordering suffix differs, with temperature and shipping format determined by the full ordering code.

📋 参考代替品(カタログ未掲載)

LC4256C-5T100

✅ ドロップイン
📦 TQFP-100 (14 x 14 mm)
Same 256-macrocell, 5 ns architecture and 100-pin TQFP footprint; the I suffix is absent, corresponding to a different ordering temperature or packaging option.

📋 参考代替品(カタログ未掲載)

LC4256V-5T100I

✅ ドロップイン
Lattice Semiconductor
📦 TQFP-100 (14 x 14 mm)
In-System Programmable SuperFAST High-Density PLD · ispMACH 4000V · 256 macro cells · 227 MHz · 3.3 V / 2.5 V / 1.8 V · -5 · Industrial · 100-pin TQFP

価格はお問い合わせください

データシートを見る →

LC4256C-6T100I

✅ ドロップイン ⚠️ 仕様未検証
📦 TQFP-100 (14 x 14 mm)
Same 256-macrocell family and 100-pin TQFP footprint; the 6 ns grade is approximately 20% slower than the 5 ns target grade.

📋 参考代替品(カタログ未掲載)

LC4256C-7T100I

✅ ドロップイン ⚠️ 仕様未検証
📦 TQFP-100 (14 x 14 mm)
Same 256-macrocell family and 100-pin TQFP footprint; the 7 ns grade is approximately 40% slower than the 5 ns target grade and therefore requires timing revalidation.

📋 参考代替品(カタログ未掲載)

LC4256C-5T100I 最大定格&電気的特性

Device Type Complex Programmable Logic Device (CPLD)
Device Family ispMACH 4000C
Macrocell Count 256 macrocells
Maximum Operating Frequency 227 MHz
Speed Grade 5 ns
Core Supply Voltage 1.8 V
Internal Supply Range 1.65 V to 1.95 V
Programmable Supply Families 1.8 V, 2.5 V, and 3.3 V
User I/O Count 64 I/O
Global Clock Pins Up to 4 with programmable clock polarity
パッケージ 100-pin TQFP
Package Dimensions 14 x 14 mm
実装タイプ Surface mount
Temperature Grade Industrial
Junction Temperature Range -40°C to 105°C
Shipping Format Tray
Configuration Support In-system programmable

LC4256C-5T100I 14 x 14 mm ピン配置ガイド

LC4256C-5T100I (14 x 14 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

LC4256C-5T100I の 14 x 14 mm パッケージピン配置図

詳細なピン配置データはありません: LC4256C-5T100I.

詳細は データシート をご参照ください。

主な用途

LC4256C-5T100I の用途: 6 件s: Industrial Control Logic, Telecommunications Interface Control, Instrumentation Signal Conditioning, Communication Protocol Bridging, Embedded Peripheral Consolidation, LED Display Control.

🏭

Industrial Control Logic

The LC4256C-5T100I fits industrial controllers that require deterministic logic for sequencing, latch handling, interlocks, and machine-state decoding. Its 256 macrocells provide substantially more implementation capacity than basic PAL devices, while the 227 MHz maximum frequency and 5 ns grade support faster control paths. The industrial junction-temperature range of -40°C to 105°C suits factory equipment with variable ambient conditions. Use the 64 available I/O for sensors, actuator outputs, and field-bus interface logic. Verify industrial system timing, isolation boundaries, and supply sequencing against the manufacturer constraints before production release.

🌐

Telecommunications Interface Control

In telecommunications equipment, the LC4256C-5T100I can implement framing logic, command decoding, clock-domain control, status multiplexing, and data-route arbitration. Its 5 ns speed class is useful for registered logic operating below the 227 MHz maximum frequency, while the deterministic CPLD architecture simplifies timing analysis. The 1.8 V core supports modern low-voltage equipment, and the industrial temperature option covers extended-temperature installations. Confirm interface voltage standards, clock topology, and in-system-programming access so the device can be updated without disrupting field operation.

🧩

Instrumentation Signal Conditioning

The LC4256C-5T100I is suitable for instrumentation logic that coordinates sensor selection, gain-control sequencing, trigger routing, and data-acquisition control. Its 256 macrocells can consolidate fixed control functions without using an FPGA, and the 227 MHz maximum operating frequency supports fast register and handshake logic. The 64 I/O provide direct connections to multiplexers, converters, and status indicators. Keep analog and digital return paths separated, and validate every timing-critical path against the 5 ns device characteristics before applying the part in precision measurement equipment.

🌐

Communication Protocol Bridging

The LC4256C-5T100I can bridge simple parallel protocols, perform protocol conversion, and implement FIFO, arbitration, and interrupt-control logic. Its 5 ns speed grade offers useful timing margin for registered interfaces operating well below the 227 MHz maximum frequency, and 64 I/O allow multiple buses or chip selects to be combined in one package. The CPLD architecture provides deterministic behavior suitable for interface-control functions. Verify input thresholds, output drive, clock-domain crossing, and programming-state behavior against the exact device electrical tables before implementation.

🔧

Embedded Peripheral Consolidation

The LC4256C-5T100I can consolidate decode, glue, and sequencing functions around microcontrollers or FPGAs without adding another broad programmable-logic device. A 256-macrocell array is useful for peripheral chip selects, DMA request control, watchdog supervision, interrupt arbitration, and programmable state machines. Its 227 MHz maximum frequency permits fast registered handshakes, while deterministic timing simplifies firmware support. Use its in-system-programming capability for configuration updates when the board design permits access to the programming pins, and ensure all unused outputs are assigned a defined state.

📺

LED Display Control

The LC4256C-5T100I can drive timing and control logic for LED display controllers, including scan sequencing, row and column decoding, brightness-control multiplexing, and fault monitoring. The 64 I/O provide a practical interface to display drivers, while the 227 MHz maximum frequency and 5 ns grade support fast counter and shift-register logic. CPLD implementation also lets the display timing evolve without changing the processor firmware. Design the output paths for the required drive voltage, use appropriate current limiting at the LED matrix, and validate refresh timing and blanking intervals on the final panel.

What is the LC4256C-5T100I?
The LC4256C-5T100I is a 256-macrocell CPLD from Lattice Semiconductor's ispMACH 4000C family, with a maximum operating frequency of 227 MHz and a 5 ns speed grade. According to the Lattice Semiconductor datasheet, the device is available in a 100-pin TQFP package and is intended for deterministic programmable-logic designs using a 1.8 V core supply.
Where can I download the LC4256C-5T100I datasheet PDF?
The LC4256C-5T100I datasheet PDF is available through the linked Lattice Semiconductor document listing. It contains the device-family electrical characteristics, architecture information, package details, and programming guidance. Use the manufacturer pin-description and power-connection tables when assigning the 100 TQFP pins and designing the decoupling network.
What is the pinout of the LC4256C-5T100I?
The LC4256C-5T100I uses a 100-pin TQFP package with 64 user I/O, supply pins, ground pins, configuration pins, and clock resources. The complete numbered pin table must be taken from the manufacturer datasheet because exposed-pad and package-pin details must match the exact TQFP drawing; consult that table before routing signals or assigning power pins.
What are the key specifications of LC4256C-5T100I that engineers should know?
The principal LC4256C-5T100I specifications are 256 macrocells, a 227 MHz maximum operating frequency, a 5 ns speed grade, 64 I/O, and a 1.8 V core supply. The Lattice Semiconductor datasheet identifies a 1.65 V to 1.95 V internal supply range and an industrial junction-temperature range of -40°C to 105°C in a 100-pin TQFP package.
What is the operating voltage of LC4256C-5T100I?
The LC4256C-5T100I operates from a 1.8 V core supply, with an internal voltage range of 1.65 V to 1.95 V. According to the Lattice Semiconductor ispMACH 4000C datasheet, the broader family supports in-system-programmable devices for 1.8 V, 2.5 V, and 3.3 V implementations, but the LC4256C-5T100I itself is the 1.8 V version.
Is LC4256C-5T100I suitable for industrial control applications?
Yes, the LC4256C-5T100I is suitable for industrial control applications requiring extended temperature operation and deterministic programmable logic. Its specified junction-temperature range is -40°C to 105°C, and the 256-macrocell, 227 MHz architecture supports control, arbitration, interface, and peripheral-control functions within the manufacturer's stated operating limits.
Where can I buy LC4256C-5T100I online?
Use the Request a Quote form on this page to request LC4256C-5T100I availability, quantity pricing, and delivery scheduling. The form allows buyers to specify the required quantity and confirm the correct 100-pin TQFP industrial-temperature ordering configuration without relying on a potentially stale catalog price or inventory figure.
What is the price of LC4256C-5T100I?
Current LC4256C-5T100I pricing depends on quantity, procurement status, and packaging requirements. Submit the Request a Quote form on this page with the required quantity and delivery location. This request is the appropriate channel for a current quote rather than relying on an archived unit-price reference.
What is the lead time for LC4256C-5T100I?
The current lead time should be confirmed through the Request a Quote form on this page. The quantity, target date, and intended tray format can be included in the request so XAIPART can return an availability and delivery commitment for the exact LC4256C-5T100I configuration.
Is LC4256C-5T100I in stock?
Stock status for LC4256C-5T100I can change with procurement volume and production scheduling. Use the Request a Quote form on this page to request current inventory confirmation for the exact MPN. The inquiry should include the required quantity and whether the order is for immediate consumption or future production.
What can replace LC4256C-5T100I?
The closest drop-in choices are the same-package Lattice Semiconductor LC4256C family variants listed with this page, subject to speed-grade, temperature, and supply requirements. No verified cross-manufacturer part was established as pin-compatible, so a production replacement should be selected from the same ispMACH 4000C footprint and validated for timing and programming behavior.
LC4256C-5T100I vs LC4256C-5TN100I - which is better for industrial use?
Both parts are associated with the LC4256C-5 speed grade and 100-pin TQFP construction, while the ordering suffix distinguishes their specific temperature and packaging attributes. For industrial use, confirm the exact junction-temperature rating and tray-versus-reel ordering code on the manufacturer label before choosing between the two MPNs.
When should I choose LC4256C-5T100I over a slower LC4256C speed grade?
Choose LC4256C-5T100I when the design needs the 227 MHz maximum operating frequency and 5 ns timing class rather than a slower speed grade. It is appropriate for high-speed interface decoding, registered control logic, and deterministic timing paths where the extra speed margin simplifies timing closure compared with the -10 or -15 grades.
Is LC4256C-5T100I suitable for a high-speed communications interface?
The LC4256C-5T100I can suit communications-interface logic when the required data rate fits its 227 MHz maximum operating frequency and 5 ns speed grade. Its deterministic CPLD architecture is useful for framing, control, arbitration, and glue logic, but the complete interface should be checked for timing, I/O standards, and system-level clocking requirements.
What is the best cross-brand equivalent for LC4256C-5T100I?
No cross-brand drop-in equivalent was confirmed for the LC4256C-5T100I. Its 100-pin TQFP footprint, 256-macrocell architecture, 1.8 V supply, configuration interface, and timing behavior require a full engineering review rather than a package-only substitution. Use the same-family alternatives on this page first, or submit a Request a Quote for cross-brand sourcing review.

エンジニアリング参考データ: LC4256C-5T100I — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the LC4256C-5T100I when a board needs 256 macrocells, a 227 MHz maximum operating frequency, a 5 ns timing class, and an industrial-temperature 100-pin TQFP implementation. It is well suited to deterministic control, interface, arbitration, and protocol-bridging logic where an FPGA would be excessive. Select LC4256C-5TN100I when the confirmed ordering attributes match that part, and use LC4256C-5T100 only after checking the required temperature suffix. LC4256V-5T100I may fit a 100-pin 5 ns design, but its family-specific behavior requires timing and architecture validation. The 6 ns and 7 ns alternatives are useful when the design has adequate timing margin, but they reduce speed-class margin by approximately 20% and 40%, respectively. No cross-brand replacement should be selected based solely on package similarity.

代替品との比較

パラメータ この製品 LC4256C-5TN100I LC4256C-5T100 LC4256V-5T100I LC4256C-6T100I LC4256C-7T100I
Package TQFP-100 (14 x 14 mm) TQFP-100 (14 x 14 mm) TQFP-100 (14 x 14 mm) TQFP-100 (14 x 14 mm) TQFP-100 (14 x 14 mm) TQFP-100 (14 x 14 mm)
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Device Type CPLD CPLD CPLD CPLD CPLD CPLD
Speed Grade 5 ns 5 ns 5 ns 5 ns 6 ns 7 ns
Core Supply Voltage 1.8 V 1.8 V 1.8 V 1.8 V 1.8 V 1.8 V

主な差別化要因

  • Higher timing class within the same package (vs LC4256C-6T100I)
  • Industrial ordering option in a 100-pin TQFP (vs LC4256C-5T100)
  • Exact 256-macrocell and 227 MHz class (vs LC4256C-5TN100I)

設計ノート

Assign the 100-pin TQFP footprint from the manufacturer package drawing and preserve access to the in-system-programming pins. Place the required core and I/O supply decoupling capacitors close to their associated pins, with short ground returns and a continuous ground plane. Verify pin orientation against pin 1 before ordering the PCB.

Use the 5 ns timing characteristics for all registered and combinational paths, including global clock distribution and I/O transitions. Confirm clock source, polarity, and routing with the design tool, and avoid relying on the 227 MHz maximum as a guaranteed system-clock rate when external loads, package effects, or I/O standards constrain operation.

Do not interchange the industrial suffix, speed suffix, or shipping code without checking the full ordering string. A pin-compatible alternative can still change temperature grade, shipping format, timing, or device-family behavior. Before substitution, compare power specifications, configuration pins, global-clock resources, and every constrained timing path in the completed design.

Keep the TQFP perimeter as free as practical from high-current switching nodes and noisy external clocks. Route sensitive configuration and clock signals away from ground-return discontinuities, use solid grounding beneath the device, and observe the manufacturer's fanout guidance. In-system-programming traces should be accessible or brought to test points for production recovery.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The industrial temperature range is specified, but RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not established. AEC-Q100 is not applicable to this general-purpose CPLD classification.

データ検証日: 2026-11-19 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LC4256C-5T100I LC4256C-5T100I datasheet LC4256C-5T100I datasheet pdf LC4256C-5T100I pinout LC4256C-5T100I specifications LC4256C-5T100I price LC4256C-5T100I stock LC4256C-5T100I equivalent LC4256C-5T100I replacement LC4256C-5T100I cross reference LC4256C-5T100I vs LC4256C-5TN100I Lattice LC4256C-5T100I LC4256C-5T100I TQFP-100 footprint LC4256C-5T100I industrial control

関連部品&用語

Lattice Semiconductor LC4256C-5T100I LC4256C-5TN100I LC4256C-5T100 LC4256V-5T100I LC4256C-6T100I LC4256C-7T100I ispMACH 4000C CPLD complex programmable logic device FPGA programmable logic macrocell 227 MHz 5 ns speed grade 1.8 V core supply in-system programmable TQFP-100 QFP package family surface mount global clock pins industrial temperature range industrial control systems telecommunications equipment protocol bridging
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示