LC4384C-5T176I - 5ns ISP High-Density CPLD | Lattice
部品番号: LC4384C-5T176I ✗ 生産終了LC4384C-5T176I 概要
A CPLD is a programmable-logic semiconductor that combines programmable interconnect, macro cells, and I/O resources into a deterministic logic fabric. The Lattice CPLD family sits between simple programmable logic devices and large FPGAs: it provides more capacity and routing flexibility than basic GAL or SPLD devices while retaining a comparatively simple, nonvolatile in-system-programming workflow.
The LC4384C-5T176I is positioned for designs requiring 5 ns-class performance and high I/O density. Its 176 gull-wing terminals provide extensive package-level connectivity for parallel buses, interface bridging, control logic, and industrial or communication equipment. Its operating-voltage choices make it suitable for mixed-voltage systems where 3.3 V, 2.5 V, and 1.8 V logic levels must be accommodated within one programmable architecture.
The device belongs to Lattice Semiconductor's SuperFAST high-density PLD family and uses in-system programming for configuration. This architecture supports field-programmable logic without requiring a separate external programming device after installation. The exact logic-element count, macro-cell count, memory configuration, I/O standards, and performance-grade details must be selected from the manufacturer datasheet before final design sign-off.
Typical uses include high-speed industrial control, peripheral interfaces, bus arbitration, protocol conversion, legacy expansion logic, and embedded control subsystems. It is most appropriate when a design needs deterministic timing, dense board connectivity, and reprogrammability across a broad range of I/O-heavy applications.
For PCB implementation, treat all 176 terminals as a dense gull-wing perimeter land pattern and follow the manufacturer land-pattern and thermal recommendations exactly. Confirm signal-integrity requirements, supported I/O voltage combinations, programming interface connections, and decoupling before releasing the layout.
This page consolidates the documented device identity, package characteristics, performance indication, lifecycle position, and verified replacement candidates. It also adds application guidance and selection criteria that help engineers determine whether the legacy LC4384C architecture remains suitable or whether a modern CPLD or FPGA migration is more practical.
ドロップイン代替品: LC4384C-5T176I — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LC4384C-5T176I (同一形状・フットプリント) — 相違点: Device Type, Mounting Type, Package, Product Family.
LC4384C-5T176C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4384V-5T176C
✅ ドロップイン価格はお問い合わせください
データシートを見る →LC4384C-5TN176I
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LC4384C-5T176I 最大定格&電気的特性
| Device Type | In-system-programmable high-density complex programmable logic device |
| Programmable Logic Family | SuperFAST High Density PLD |
| Propagation Delay | 5 ns |
| Supported Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| Programming Method | In-system programming |
| Package Code | LFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Number of Terminals | 176 |
| 実装タイプ | Surface-mount |
LC4384C-5T176I square ピン配置ガイド
LC4384C-5T176I (square パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: LC4384C-5T176I.
詳細は データシート をご参照ください。
主な用途
LC4384C-5T176I の用途: 6 件s: Industrial Control Logic, Parallel Bus Interface Bridging, Peripheral Control Consolidation, Communication Interface Control, Test and Measurement Control, Embedded System Expansion.
Industrial Control Logic
The LC4384C-5T176I fits centralized industrial control blocks that combine parallel sensor inputs, actuator outputs, sequencing, and communication-interface logic. Its 176 gull-wing terminals provide high board-level connectivity, while the 5 ns propagation-delay designation supports short combinational paths and deterministic control responses. The documented 3.3 V, 2.5 V, and 1.8 V operation can simplify logic integration across multiple voltage domains. Place the device in a mature CPLD design when existing firmware, toolchain, and board qualification are already established.
おすすめ
Parallel Bus Interface Bridging
The LC4384C-5T176I can implement protocol conversion, buffering, and timing adaptation between parallel buses in industrial and communications equipment. Its 176-terminal LFQFP footprint offers many available I/O connections, and the 5 ns speed designation is appropriate for short register and handshake paths. The three documented supply-voltage options can support mixed-voltage logic interfaces when the exact I/O rules are followed. This application is especially useful when redesigning a legacy bus architecture without changing the existing board footprint.
おすすめ
Peripheral Control Consolidation
The LC4384C-5T176I is suited to consolidating programmable glue logic around processors, FPGAs, memory, and peripheral devices. In-system programming allows a finished board to be configured or updated without removing the device, and the large 176-terminal package supports numerous control, status, interrupt, and chip-select signals. The 5 ns designation helps preserve timing margins in short control paths. Engineers should use the LC4384C pin-description table to reserve programming pins and ensure every bank follows the selected voltage and I/O rules.
おすすめ
Communication Interface Control
The LC4384C-5T176I can implement framing, command decoding, flow control, and programmable signal conditioning around communication transceivers. Its high terminal count permits parallel data, status, and configuration signals to be consolidated in one package, while the 5 ns propagation delay supports short control loops between the transceiver and system logic. The 1.8 V, 2.5 V, and 3.3 V support is useful in equipment containing more than one logic voltage. Verify protocol timing and I/O direction constraints in the manufacturer documentation.
おすすめ
Test and Measurement Control
The LC4384C-5T176I can serve as the programmable sequencer and interface controller in modular test equipment, instrumentation, and automated measurement systems. Its in-system programming permits configuration changes during development, and its 176 terminals provide ample connections for channel selection, trigger routing, limit-setting signals, and front-panel control. The 5 ns timing class benefits short synchronous control paths. Use careful partitioning so high-speed analog signals remain outside the CPLD and the device handles only digital control functions.
おすすめ
Embedded System Expansion
The LC4384C-5T176I is useful for legacy embedded platforms needing additional programmable logic without redesigning the main processor or changing a large board footprint. It can decode legacy status signals, generate enables, arbitrate buses, and implement peripheral personality modules. In-system programming supports field updates, while the 5 ns designation provides useful timing headroom for short asynchronous control paths. The architecture is most attractive for equipment already standardized on Lattice SuperFAST high-density PLDs and their associated design tools.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LC4384C-5T176I — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LC4384C-5T176C | LC4384V-5T176C | LC4384C-5TN176I |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | LFQFP-176 | LFQFP-176 | LFQFP-176 | LFQFP-176 |
| Device Family | LC4384C | LC4384C | LC4384V | LC4384C |
| Propagation Delay | 5 ns | 5 ns | 5 ns | 5 ns |
| Number of Terminals | 176 | 176 | 176 | 176 |
| Terminal Form | Gull wing | Gull wing | Gull wing | Gull wing |
| Ordering Suffix | Industrial I suffix | Commercial C suffix | Commercial C suffix in LC4384V family | N code added before 176I |
主な差別化要因
- Industrial ordering option (vs LC4384C-5T176C)
- Broader legacy-family replacement candidate (vs LC4384C-5TN176I)
- Same package and speed class within the Lattice portfolio (vs LC4384V-5T176C)
設計ノート
Use the manufacturer LC4384C package drawing as the controlling land-pattern reference for the 176-terminal LFQFP. Preserve the terminal pitch, pad length, pad width, solder-mask opening, and exposed assembly tolerances exactly. Because this is a high pin-count perimeter package, inspect the board for annular-ring quality and use a controlled impedance-aware escape strategy for routed logic signals.
Reserve the configuration and programming pins specified by the datasheet, and keep the programming interface away from fast switching or high-current power paths. Apply the manufacturer's I/O and bank-voltage constraints for every 1.8 V, 2.5 V, or 3.3 V interface. Add test access for configuration, clock, reset, and key high-speed nets so production validation does not depend on invasive rework.
Decouple each supported power domain using the capacitance and placement values specified in the manufacturer power-supply recommendations. Do not assume that the 3.3 V, 2.5 V, and 1.8 V capability permits arbitrary simultaneous bank voltages. Review voltage sequencing, input thresholds, output-current limits, and power-up behavior against the exact ordering code before powering the board.
Do not substitute an LC4384V or LC4384C ordering option solely because it has a 176-terminal package and a 5 ns speed code. Architecture, resource organization, voltage support, programming behavior, and qualification can differ. For a production replacement, compare the manufacturer ordering tables, confirm pin compatibility, recompile the design with the applicable tool version, and perform timing and I/O testing.
コンプライアンス情報
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN.