LC4384C-5T176I - 5ns ISP High-Density CPLD | Lattice
MPN: LC4384C-5T176I ✗ End of LifeLC4384C-5T176I Overview
A CPLD is a programmable-logic semiconductor that combines programmable interconnect, macro cells, and I/O resources into a deterministic logic fabric. The Lattice CPLD family sits between simple programmable logic devices and large FPGAs: it provides more capacity and routing flexibility than basic GAL or SPLD devices while retaining a comparatively simple, nonvolatile in-system-programming workflow.
The LC4384C-5T176I is positioned for designs requiring 5 ns-class performance and high I/O density. Its 176 gull-wing terminals provide extensive package-level connectivity for parallel buses, interface bridging, control logic, and industrial or communication equipment. Its operating-voltage choices make it suitable for mixed-voltage systems where 3.3 V, 2.5 V, and 1.8 V logic levels must be accommodated within one programmable architecture.
The device belongs to Lattice Semiconductor's SuperFAST high-density PLD family and uses in-system programming for configuration. This architecture supports field-programmable logic without requiring a separate external programming device after installation. The exact logic-element count, macro-cell count, memory configuration, I/O standards, and performance-grade details must be selected from the manufacturer datasheet before final design sign-off.
Typical uses include high-speed industrial control, peripheral interfaces, bus arbitration, protocol conversion, legacy expansion logic, and embedded control subsystems. It is most appropriate when a design needs deterministic timing, dense board connectivity, and reprogrammability across a broad range of I/O-heavy applications.
For PCB implementation, treat all 176 terminals as a dense gull-wing perimeter land pattern and follow the manufacturer land-pattern and thermal recommendations exactly. Confirm signal-integrity requirements, supported I/O voltage combinations, programming interface connections, and decoupling before releasing the layout.
This page consolidates the documented device identity, package characteristics, performance indication, lifecycle position, and verified replacement candidates. It also adds application guidance and selection criteria that help engineers determine whether the legacy LC4384C architecture remains suitable or whether a modern CPLD or FPGA migration is more practical.
Drop-in alternatives for LC4384C-5T176I — same package, pin-to-pin compatible. Different-package parts requiring PCB rework are excluded.
Variants in this series
Same-series models that are drop-in compatible with LC4384C-5T176I (same form factor and footprint) — differing in Device Type, Mounting Type, Package, Product Family.
LC4384C-5T176C
✅ Drop-InContact for price
View Datasheet →LC4384V-5T176C
✅ Drop-InContact for price
View Datasheet →LC4384C-5TN176I
✅ Drop-In📋 Reference alternative (not in catalog)
LC4384C-5T176I Maximum Ratings & Electrical Characteristics
| Device Type | In-system-programmable high-density complex programmable logic device |
| Programmable Logic Family | SuperFAST High Density PLD |
| Propagation Delay | 5 ns |
| Supported Supply Voltages | 1.8 V, 2.5 V, and 3.3 V |
| Programming Method | In-system programming |
| Package Code | LFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| Number of Terminals | 176 |
| Mounting Type | Surface-mount |
LC4384C-5T176I square Pin Configuration Guide
Pin configuration for LC4384C-5T176I (square package). This digital IC includes GPIO, communication interfaces (UART, SPI, I2C), and power pins. Refer to the manufacturer datasheet for alternate pin functions and configuration options. Essential for embedded system design and PCB layout.
No detailed pinout data available for LC4384C-5T176I.
Refer to the datasheet for full pin configuration.
Typical Applications
LC4384C-5T176I is suitable for 6 applications: Industrial Control Logic, Parallel Bus Interface Bridging, Peripheral Control Consolidation, Communication Interface Control, Test and Measurement Control, Embedded System Expansion.
Industrial Control Logic
The LC4384C-5T176I fits centralized industrial control blocks that combine parallel sensor inputs, actuator outputs, sequencing, and communication-interface logic. Its 176 gull-wing terminals provide high board-level connectivity, while the 5 ns propagation-delay designation supports short combinational paths and deterministic control responses. The documented 3.3 V, 2.5 V, and 1.8 V operation can simplify logic integration across multiple voltage domains. Place the device in a mature CPLD design when existing firmware, toolchain, and board qualification are already established.
Recommended
Parallel Bus Interface Bridging
The LC4384C-5T176I can implement protocol conversion, buffering, and timing adaptation between parallel buses in industrial and communications equipment. Its 176-terminal LFQFP footprint offers many available I/O connections, and the 5 ns speed designation is appropriate for short register and handshake paths. The three documented supply-voltage options can support mixed-voltage logic interfaces when the exact I/O rules are followed. This application is especially useful when redesigning a legacy bus architecture without changing the existing board footprint.
Recommended
Peripheral Control Consolidation
The LC4384C-5T176I is suited to consolidating programmable glue logic around processors, FPGAs, memory, and peripheral devices. In-system programming allows a finished board to be configured or updated without removing the device, and the large 176-terminal package supports numerous control, status, interrupt, and chip-select signals. The 5 ns designation helps preserve timing margins in short control paths. Engineers should use the LC4384C pin-description table to reserve programming pins and ensure every bank follows the selected voltage and I/O rules.
Recommended
Communication Interface Control
The LC4384C-5T176I can implement framing, command decoding, flow control, and programmable signal conditioning around communication transceivers. Its high terminal count permits parallel data, status, and configuration signals to be consolidated in one package, while the 5 ns propagation delay supports short control loops between the transceiver and system logic. The 1.8 V, 2.5 V, and 3.3 V support is useful in equipment containing more than one logic voltage. Verify protocol timing and I/O direction constraints in the manufacturer documentation.
Recommended
Test and Measurement Control
The LC4384C-5T176I can serve as the programmable sequencer and interface controller in modular test equipment, instrumentation, and automated measurement systems. Its in-system programming permits configuration changes during development, and its 176 terminals provide ample connections for channel selection, trigger routing, limit-setting signals, and front-panel control. The 5 ns timing class benefits short synchronous control paths. Use careful partitioning so high-speed analog signals remain outside the CPLD and the device handles only digital control functions.
Recommended
Embedded System Expansion
The LC4384C-5T176I is useful for legacy embedded platforms needing additional programmable logic without redesigning the main processor or changing a large board footprint. It can decode legacy status signals, generate enables, arbitrate buses, and implement peripheral personality modules. In-system programming supports field updates, while the 5 ns designation provides useful timing headroom for short asynchronous control paths. The architecture is most attractive for equipment already standardized on Lattice SuperFAST high-density PLDs and their associated design tools.
Recommended
Recommended Products Summary
Engineering reference data for LC4384C-5T176I — comparison, design guidance, and compliance information.
Selection Guide
Comparison with Alternatives
| Parameter | This Product | LC4384C-5T176C | LC4384V-5T176C | LC4384C-5TN176I |
|---|---|---|---|---|
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Package | LFQFP-176 | LFQFP-176 | LFQFP-176 | LFQFP-176 |
| Device Family | LC4384C | LC4384C | LC4384V | LC4384C |
| Propagation Delay | 5 ns | 5 ns | 5 ns | 5 ns |
| Number of Terminals | 176 | 176 | 176 | 176 |
| Terminal Form | Gull wing | Gull wing | Gull wing | Gull wing |
| Ordering Suffix | Industrial I suffix | Commercial C suffix | Commercial C suffix in LC4384V family | N code added before 176I |
Key Differentiators
- Industrial ordering option (vs LC4384C-5T176C)
- Broader legacy-family replacement candidate (vs LC4384C-5TN176I)
- Same package and speed class within the Lattice portfolio (vs LC4384V-5T176C)
Design Notes
Use the manufacturer LC4384C package drawing as the controlling land-pattern reference for the 176-terminal LFQFP. Preserve the terminal pitch, pad length, pad width, solder-mask opening, and exposed assembly tolerances exactly. Because this is a high pin-count perimeter package, inspect the board for annular-ring quality and use a controlled impedance-aware escape strategy for routed logic signals.
Reserve the configuration and programming pins specified by the datasheet, and keep the programming interface away from fast switching or high-current power paths. Apply the manufacturer's I/O and bank-voltage constraints for every 1.8 V, 2.5 V, or 3.3 V interface. Add test access for configuration, clock, reset, and key high-speed nets so production validation does not depend on invasive rework.
Decouple each supported power domain using the capacitance and placement values specified in the manufacturer power-supply recommendations. Do not assume that the 3.3 V, 2.5 V, and 1.8 V capability permits arbitrary simultaneous bank voltages. Review voltage sequencing, input thresholds, output-current limits, and power-up behavior against the exact ordering code before powering the board.
Do not substitute an LC4384V or LC4384C ordering option solely because it has a 176-terminal package and a 5 ns speed code. Architecture, resource organization, voltage support, programming behavior, and qualification can differ. For a production replacement, compare the manufacturer ordering tables, confirm pin compatibility, recompile the design with the applicable tool version, and perform timing and I/O testing.
Compliance Information
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN.