Lattice Semiconductor

LC4384C-5T176I - 5ns ISP High-Density CPLD | Lattice

MPN: LC4384C-5T176I ✗ 停產
1.8 V, 2.5 V, and 3.3 V Vdss LFQFP Package
MOQ: 1 |

LC4384C-5T176I 概覽

Lattice Semiconductor LC4384C-5T176I is an in-system-programmable, high-density complex programmable logic device with a 5 ns propagation delay, 176 gull-wing terminals, and an LFQFP package. It supports 3.3 V, 2.5 V, and 1.8 V operation, allowing the device to address logic interfaces operating across several voltage domains.

A CPLD is a programmable-logic semiconductor that combines programmable interconnect, macro cells, and I/O resources into a deterministic logic fabric. The Lattice CPLD family sits between simple programmable logic devices and large FPGAs: it provides more capacity and routing flexibility than basic GAL or SPLD devices while retaining a comparatively simple, nonvolatile in-system-programming workflow.

The LC4384C-5T176I is positioned for designs requiring 5 ns-class performance and high I/O density. Its 176 gull-wing terminals provide extensive package-level connectivity for parallel buses, interface bridging, control logic, and industrial or communication equipment. Its operating-voltage choices make it suitable for mixed-voltage systems where 3.3 V, 2.5 V, and 1.8 V logic levels must be accommodated within one programmable architecture.

The device belongs to Lattice Semiconductor's SuperFAST high-density PLD family and uses in-system programming for configuration. This architecture supports field-programmable logic without requiring a separate external programming device after installation. The exact logic-element count, macro-cell count, memory configuration, I/O standards, and performance-grade details must be selected from the manufacturer datasheet before final design sign-off.

Typical uses include high-speed industrial control, peripheral interfaces, bus arbitration, protocol conversion, legacy expansion logic, and embedded control subsystems. It is most appropriate when a design needs deterministic timing, dense board connectivity, and reprogrammability across a broad range of I/O-heavy applications.

For PCB implementation, treat all 176 terminals as a dense gull-wing perimeter land pattern and follow the manufacturer land-pattern and thermal recommendations exactly. Confirm signal-integrity requirements, supported I/O voltage combinations, programming interface connections, and decoupling before releasing the layout.

This page consolidates the documented device identity, package characteristics, performance indication, lifecycle position, and verified replacement candidates. It also adds application guidance and selection criteria that help engineers determine whether the legacy LC4384C architecture remains suitable or whether a modern CPLD or FPGA migration is more practical.

直接替換替代品,適用於 LC4384C-5T176I — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: LC4384C-5T176I (相同外形與佔位) — 差異在於 Device Type, Mounting Type, Package, Product Family.

Lattice Semiconductor
Device Type: Complex Programmable Logic Device (CPLD)
Mounting Type: Surface Mount
Package: 176-pin LQFP
比較對象 LC4384C-5T176I →
Lattice Semiconductor
Device Type: Complex programmable logic device (CPLD)
Mounting Type: Surface mount
Package: LQFP-176
比較對象 LC4384C-5T176I →

LC4384C-5T176C

✅ 直接替換
Lattice Semiconductor
📦 LFQFP-176
Complex Programmable Logic Device (CPLD) · In-System Programmable · LC4384C Super Fast High Density PLD · 3.3 V, 2.5 V, or 1.8 V · 176-pin LQFP · Surface Mount

聯絡詢價

查看資料表 →

LC4384V-5T176C

✅ 直接替換
Lattice Semiconductor
📦 LFQFP-176
Complex programmable logic device (CPLD) · ispMACH 4000 · 384 macrocells · 400 MHz · 5 ns · 3.3 V · 144 I/O pins · 176 pins

聯絡詢價

查看資料表 →

LC4384C-5TN176I

✅ 直接替換
📦 LFQFP-176
Additional N ordering code differentiates the part while the LC4384C family, 5 ns designation, and 176-terminal format are retained

📋 參考替代品(不在目錄中)

LC4384C-5T176I 最大額定值與電氣特性

Device Type In-system-programmable high-density complex programmable logic device
Programmable Logic Family SuperFAST High Density PLD
Propagation Delay 5 ns
Supported Supply Voltages 1.8 V, 2.5 V, and 3.3 V
Programming Method In-system programming
Package Code LFQFP
Package Shape Square
Terminal Form Gull wing
Number of Terminals 176
安裝類型 Surface-mount

LC4384C-5T176I square 腳位配置指南

LC4384C-5T176I(square 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

LC4384C-5T176I 的 square 封裝腳位圖

無詳細腳位定義資料: LC4384C-5T176I.

請參閱 資料表 以查看完整腳位配置。

典型應用

LC4384C-5T176I 適用於 6 應用s: Industrial Control Logic, Parallel Bus Interface Bridging, Peripheral Control Consolidation, Communication Interface Control, Test and Measurement Control, Embedded System Expansion.

🏭

Industrial Control Logic

The LC4384C-5T176I fits centralized industrial control blocks that combine parallel sensor inputs, actuator outputs, sequencing, and communication-interface logic. Its 176 gull-wing terminals provide high board-level connectivity, while the 5 ns propagation-delay designation supports short combinational paths and deterministic control responses. The documented 3.3 V, 2.5 V, and 1.8 V operation can simplify logic integration across multiple voltage domains. Place the device in a mature CPLD design when existing firmware, toolchain, and board qualification are already established.

🌐

Parallel Bus Interface Bridging

The LC4384C-5T176I can implement protocol conversion, buffering, and timing adaptation between parallel buses in industrial and communications equipment. Its 176-terminal LFQFP footprint offers many available I/O connections, and the 5 ns speed designation is appropriate for short register and handshake paths. The three documented supply-voltage options can support mixed-voltage logic interfaces when the exact I/O rules are followed. This application is especially useful when redesigning a legacy bus architecture without changing the existing board footprint.

🖥️

Peripheral Control Consolidation

The LC4384C-5T176I is suited to consolidating programmable glue logic around processors, FPGAs, memory, and peripheral devices. In-system programming allows a finished board to be configured or updated without removing the device, and the large 176-terminal package supports numerous control, status, interrupt, and chip-select signals. The 5 ns designation helps preserve timing margins in short control paths. Engineers should use the LC4384C pin-description table to reserve programming pins and ensure every bank follows the selected voltage and I/O rules.

🌐

Communication Interface Control

The LC4384C-5T176I can implement framing, command decoding, flow control, and programmable signal conditioning around communication transceivers. Its high terminal count permits parallel data, status, and configuration signals to be consolidated in one package, while the 5 ns propagation delay supports short control loops between the transceiver and system logic. The 1.8 V, 2.5 V, and 3.3 V support is useful in equipment containing more than one logic voltage. Verify protocol timing and I/O direction constraints in the manufacturer documentation.

🔧

Test and Measurement Control

The LC4384C-5T176I can serve as the programmable sequencer and interface controller in modular test equipment, instrumentation, and automated measurement systems. Its in-system programming permits configuration changes during development, and its 176 terminals provide ample connections for channel selection, trigger routing, limit-setting signals, and front-panel control. The 5 ns timing class benefits short synchronous control paths. Use careful partitioning so high-speed analog signals remain outside the CPLD and the device handles only digital control functions.

🔧

Embedded System Expansion

The LC4384C-5T176I is useful for legacy embedded platforms needing additional programmable logic without redesigning the main processor or changing a large board footprint. It can decode legacy status signals, generate enables, arbitrate buses, and implement peripheral personality modules. In-system programming supports field updates, while the 5 ns designation provides useful timing headroom for short asynchronous control paths. The architecture is most attractive for equipment already standardized on Lattice SuperFAST high-density PLDs and their associated design tools.

What is the LC4384C-5T176I?
The LC4384C-5T176I is a Lattice Semiconductor SuperFAST high-density CPLD with in-system programming, a 5 ns propagation delay, and 176 terminals in an LFQFP package. According to the LC4384C datasheet, the device supports 3.3 V, 2.5 V, and 1.8 V operation. It is intended for designs that require dense programmable logic, extensive package connectivity, and deterministic performance.
What are the key specifications of LC4384C-5T176I?
The key specifications are a 5 ns propagation delay, in-system programmability, 3.3 V/2.5 V/1.8 V operation, and 176 gull-wing terminals in a square LFQFP package. The Lattice Semiconductor datasheet identifies the LC4384C as a SuperFAST high-density programmable logic device. Logic-element, macro-cell, memory, frequency, and temperature details should be confirmed in the ordering guide and device datasheet before a new design is released.
Where can I download the LC4384C-5T176I datasheet PDF?
The LC4384C-5T176I datasheet can be accessed through the Lattice Semiconductor document link on this page. The document describes a 3.3 V, 2.5 V, and 1.8 V in-system-programmable SuperFAST high-density PLD. Use the manufacturer pin description, electrical characteristics, and package drawings sections when assigning PCB lands and validating power-supply connections.
Where can I find the LC4384C-5T176I pinout?
Use the pin-description table and package drawing in the Lattice Semiconductor LC4384C datasheet to find the LC4384C-5T176I pinout. The device has 176 gull-wing terminals in a square LFQFP package. Do not infer pin assignments from neighboring CPLD families, because power, ground, configuration, user I/O, and dedicated-function assignments must follow the exact package variant.
What is the propagation delay of LC4384C-5T176I?
The LC4384C-5T176I has a 5 ns propagation-delay designation, as listed for the exact ordered MPN. This places it in the 5 ns performance class within the Lattice Semiconductor SuperFAST high-density PLD family. Timing closure still depends on the selected logic path, I/O standard, loading, supply voltage, temperature, and the specific timing table used for the design.
Can LC4384C-5T176I operate at 1.8 V, 2.5 V, and 3.3 V?
Yes. The LC4384C device family is documented as supporting 3.3 V, 2.5 V, and 1.8 V operation. The supported core and I/O voltage combination for any selected LC4384C ordering code must still be checked against the manufacturer ordering table, because package suffix, temperature grade, and speed grade identify more than the core supply alone.
Is LC4384C-5T176I suitable for industrial control systems?
The LC4384C-5T176I is suitable for many industrial-control functions because it combines in-system programmability, 5 ns-class timing, three supported supply-voltage options, and 176 package terminals. Its suitability depends on the required I/O standards, operating-temperature grade, logic capacity, and lifecycle status. Confirm those electrical and environmental requirements in the manufacturer documentation before production release.
What is the difference between LC4384C-5T176I and LC4384C-5T176C?
The principal documented difference is the final ordering suffix: the LC4384C-5T176I carries the industrial suffix, while the LC4384C-5T176C carries the commercial suffix. Both identify 176-terminal LC4384C devices in the same general speed and package family. The manufacturer ordering table should be checked for the exact temperature rating and any associated qualification differences before substitution.
Is LC4384C-5T176I the same as LC4384V-5T176C?
No. The LC4384C and LC4384V are distinct Lattice Semiconductor device families, even though both appear in 176-terminal, 5 ns-class ordering options. The LC4384C is identified as a SuperFAST high-density PLD, while the LC4384V designation refers to a different device family whose electrical characteristics must be reviewed separately. Do not treat them as automatically interchangeable.
When should I choose LC4384C-5T176I over LC4384C-5T176C?
Choose the LC4384C-5T176I when the design requires the industrial ordering option; choose the LC4384C-5T176C when the commercial ordering option is appropriate for the product. The two share the core device family, 5 ns speed designation, 176-terminal LFQFP format, and programmable-logic architecture. Confirm the exact temperature and qualification requirements from the Lattice ordering information.
What is the best drop-in replacement for LC4384C-5T176I?
The closest documented same-footprint replacement is the LC4384C-5T176C because it retains the LC4384C family, 5 ns speed designation, 176-terminal package, and programmable-logic architecture. It differs in ordering suffix and associated temperature or qualification option. For an existing industrial design, verify those requirements before treating the commercial-suffix device as a drop-in substitute.
Can LC4384C-5TN176I replace LC4384C-5T176I?
The LC4384C-5TN176I is a closely related same-family ordering option, but it should be treated as a candidate replacement rather than automatically equivalent. The target uses a 176-terminal LFQFP package and a 5 ns speed designation, while the additional N code in the alternate ordering number requires verification against the manufacturer ordering table. Confirm package, pinout, temperature grade, and qualification before substitution.
Where can I buy LC4384C-5T176I?
Use the Request a Quote form on this page to request availability, lead time, and order handling for the LC4384C-5T176I. Because this is a legacy programmable-logic product, lifecycle status and supply conditions should be confirmed before committing a production schedule. Provide the exact MPN, quantity, and required shipment destination with the request.
What is the price of LC4384C-5T176I?
Current LC4384C-5T176I commercial terms are obtained through the Request a Quote form on this page. The structured price information is refreshed by the platform and may change because this is an older CPLD with limited lifecycle visibility. Submit the required quantity, package information, and destination to receive a current quotation and availability confirmation.
What is the lead time for LC4384C-5T176I?
Current lead time for the LC4384C-5T176I should be requested through the Request a Quote form on this page. Because the device belongs to a mature programmable-logic family, availability can depend on remaining factory inventory, authorized-channel stock, and replenishment status. Include your production schedule and required quantity so the response can reflect the appropriate supply commitment.

工程參考資料,適用於 LC4384C-5T176I — 比較、設計指引及合規資訊。

選型指南

Choose the LC4384C-5T176I when maintaining an existing LC4384C design requires the exact industrial ordering option, a 176-terminal LFQFP footprint, and 5 ns-class timing. The LC4384C-5T176C is the closest same-family candidate when the commercial suffix is acceptable, but its temperature and qualification implications must be reviewed. Consider the LC4384C-5TN176I only after confirming what the additional ordering code changes. LC4384V-5T176C offers a matching package and speed indication but belongs to a different device family, so it should be used only after checking architecture, I/O, programming, and timing compatibility. For new high-volume products, compare this legacy CPLD against current CPLD or FPGA options for tool support, supply continuity, lifecycle risk, and cost of board modernization.

與替代品比較

參數 本產品 LC4384C-5T176C LC4384V-5T176C LC4384C-5TN176I
Brand Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor Lattice Semiconductor
Package LFQFP-176 LFQFP-176 LFQFP-176 LFQFP-176
Device Family LC4384C LC4384C LC4384V LC4384C
Propagation Delay 5 ns 5 ns 5 ns 5 ns
Number of Terminals 176 176 176 176
Terminal Form Gull wing Gull wing Gull wing Gull wing
Ordering Suffix Industrial I suffix Commercial C suffix Commercial C suffix in LC4384V family N code added before 176I

主要差異化特點

  • Industrial ordering option (對比LC4384C-5T176C)
  • Broader legacy-family replacement candidate (對比LC4384C-5TN176I)
  • Same package and speed class within the Lattice portfolio (對比LC4384V-5T176C)

設計說明

Use the manufacturer LC4384C package drawing as the controlling land-pattern reference for the 176-terminal LFQFP. Preserve the terminal pitch, pad length, pad width, solder-mask opening, and exposed assembly tolerances exactly. Because this is a high pin-count perimeter package, inspect the board for annular-ring quality and use a controlled impedance-aware escape strategy for routed logic signals.

Reserve the configuration and programming pins specified by the datasheet, and keep the programming interface away from fast switching or high-current power paths. Apply the manufacturer's I/O and bank-voltage constraints for every 1.8 V, 2.5 V, or 3.3 V interface. Add test access for configuration, clock, reset, and key high-speed nets so production validation does not depend on invasive rework.

Decouple each supported power domain using the capacitance and placement values specified in the manufacturer power-supply recommendations. Do not assume that the 3.3 V, 2.5 V, and 1.8 V capability permits arbitrary simultaneous bank voltages. Review voltage sequencing, input thresholds, output-current limits, and power-up behavior against the exact ordering code before powering the board.

Do not substitute an LC4384V or LC4384C ordering option solely because it has a 176-terminal package and a 5 ns speed code. Architecture, resource organization, voltage support, programming behavior, and qualification can differ. For a production replacement, compare the manufacturer ordering tables, confirm pin compatibility, recompile the design with the applicable tool version, and perform timing and I/O testing.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact MPN.

資料驗證日期: 2026-11-19 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

LC4384C-5T176I datasheet LC4384C-5T176I pinout LC4384C-5T176I datasheet pdf LC4384C-5T176I equivalent LC4384C-5T176I replacement LC4384C-5T176I footprint LC4384C-5T176I price LC4384C-5T176I stock Lattice Semiconductor LC4384C-5T176I LC4384C-5T176I vs LC4384C-5T176C LC4384C-5T176I 5ns CPLD LC4384C-5T176I LFQFP-176

相關元件與詞彙

Lattice Semiconductor LC4384C-5T176I LC4384C-5T176C LC4384V-5T176C LC4384C-5TN176I CPLD complex programmable logic device SuperFAST high-density PLD in-system programming FPGA programmable logic logic element macro cell propagation delay LFQFP-176 TQFP family gull-wing terminal surface-mount package 1.8 V 2.5 V 3.3 V industrial control parallel bus interface test and measurement
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情