STMicroelectronics

LM2902AWYDT - Quad 1.3MHz Op Amp, 14-SO | STMicroelectronics

部品番号: LM2902AWYDT ✓ 生産中
375 uA Vdss 20 nA Id 14-SO Package
MOQ: 1 |

LM2902AWYDT 概要

The STMicroelectronics LM2902AWYDT is a low-power quad operational amplifier with four internally compensated amplifiers, 1.3 MHz gain-bandwidth performance, and 100 dB typical open-loop gain. It is packaged in a 14-pin small-outline package identified as 14-SO and is intended for general-purpose signal conditioning across automotive and industrial control systems.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its non-inverting and inverting inputs. The quad configuration integrates four independent amplifiers into one 14-SO package. Internal frequency compensation simplifies closed-loop design, while a common power architecture allows the four amplifiers to operate from a single supply over a wide voltage range. The LM2902 family therefore provides more functional density than discrete single amplifiers and reduces the number of components needed for multi-channel analog circuits.

Key electrical characteristics include a 1.3 MHz gain-bandwidth product, 100 dB typical gain, approximately 375 uA supply current per amplifier, 20 nA input bias current, 2 nA input offset current, and 800 V input differential voltage capability. These characteristics support general-purpose applications where low power, usable bandwidth, and moderate input precision are more important than high-speed or precision amplifier performance.

The device uses four independent operational amplifiers with internally implemented frequency compensation. Its push-pull output stage supports output-current demands commonly encountered in buffer, comparator-style, and analog-control circuits. The operating approach is suited to single-supply systems, where an amplifier may operate from an input and output signal referenced to the same supply rail rather than requiring a symmetrical positive and negative supply.

Typical uses include industrial process-control loops, automotive interface circuits, sensor conditioning, current-to-voltage conversion, low-frequency active filters, and general signal amplification. The four amplifiers can process related channels or provide separate functions such as amplification, filtering, thresholding, and buffering on one PCB. For designs requiring more precision or bandwidth, the device should be compared against the corresponding performance limits before compensation, noise, or offset requirements are finalized.

Layout should preserve short feedback paths, maintain suitable grounding, and place input and output decoupling close to the device. Because this is a general-purpose quad amplifier, stability is commonly established with the manufacturer's recommended compensation approach and output isolation resistors where capacitive loading requires them. Verify input and output common-mode limits, supply voltage, load current, and thermal conditions against the manufacturer datasheet before releasing the circuit.

This product record combines the LM2902AWYDT device identity, package information, principal electrical characteristics, sourcing context, and verified drop-in alternatives. It also adds practical guidance for comparing the STMicroelectronics LM2902 family with pin-compatible single-supply quad amplifiers from Texas Instruments and NXP Semiconductors.

ドロップイン代替品: LM2902AWYDT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LM2902AWYDT (同一形状・フットプリント) — 相違点: Package, RoHS Status, Number of Amplifier Channels, Supply Configuration, Amplifier Type.

Texas Instruments
Package: 14-SOIC
RoHS Status: unknown
Number of Amplifier Channels: 4
比較対象 LM2902AWYDT →
Texas Instruments
Package: 14-SOIC
RoHS Status: unknown
Number of Amplifier Channels: 4
比較対象 LM2902AWYDT →
onsemi
Package: 14-TSSOP
Number of Amplifier Channels: 4 circuits
Supply Configuration: Single supply
比較対象 LM2902AWYDT →
STMicroelectronics
RoHS Status: RoHS compliant
Amplifier Type: Standard general-purpose operational amplifier
比較対象 LM2902AWYDT →

LM2902WYDT

✅ ドロップイン
STMicroelectronics
📦 14-SO
4 circuits · Standard general-purpose operational amplifier · 1.3 MHz · 100 dB · 375 uA · 20 nA · 2 nA · 800 V

価格はお問い合わせください

データシートを見る →

LM2902AWYD

✅ ドロップイン
📦 14-SO
Same four-amplifier count and 14-SO footprint with 0% channel-count or pin-count difference; the terminal suffix differs from the target ordering code.

📋 参考代替品(カタログ未掲載)

LM2902DTB

✅ ドロップイン
onsemi
📦 14-SO
Quad operational amplifier · onsemi · 3 V to 26 V · 4 circuits · 14-TSSOP · Surface mount · 1.2 MHz · 2 mV

価格はお問い合わせください

データシートを見る →

LM2902D

✅ ドロップイン
Texas Instruments
📦 14-SOIC
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

価格はお問い合わせください

データシートを見る →

LM2902DR

✅ ドロップイン
Texas Instruments
📦 14-SO
Quad operational amplifier · 4 · 26 V · 1.2 MHz · 2 mV · Single supply or split supply · Push-pull

価格はお問い合わせください

データシートを見る →

LM2902AWYDT 最大定格&電気的特性

Amplifier Type General-purpose operational amplifier
Number of Amplifiers 4 amplifiers
Gain-Bandwidth Product 1.3 MHz
Open-Loop Gain 100 dB
電源電流 375 uA
Input Bias Current 20 nA
Input Offset Current 2 nA
Input Differential Voltage 800 V
Compensation Internal frequency compensation
Supply Type Single supply
パッケージ 14-SO
ピン数 14 pins
実装タイプ Surface mount
出力タイプ Push-pull
RoHS ステータス Compliant

LM2902AWYDT 14-so ピン配置ガイド

LM2902AWYDT (14-so パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

LM2902AWYDT の 14-so パッケージピン配置図

詳細なピン配置データはありません: LM2902AWYDT.

詳細は データシート をご参照ください。

主な用途

LM2902AWYDT の用途: 6 件s: Industrial Sensor Conditioning, Automotive Interface Circuits, Active Audio Filtering, Current-to-Voltage Conversion, Power Supply Feedback Control, Portable Instrumentation.

🏭

Industrial Sensor Conditioning

The LM2902AWYDT fits multichannel industrial sensor conditioning because its four independent, internally compensated amplifiers can amplify, filter, and buffer several related signals in one 14-SO package. The 1.3 MHz gain-bandwidth product is adequate for many low-frequency pressure, temperature, and position sensors, while approximately 375 uA supply current per amplifier supports low-power measurement modules. Each channel can implement a non-inverting or inverting stage according to the sensor impedance and signal level. Confirm the input common-mode range against the selected sensor output, and keep feedback loops short to maintain stability. The quad configuration reduces package count and helps simplify routing when several conditioned signals must be digitized by a downstream controller.

🚗

Automotive Interface Circuits

The LM2902AWYDT is suitable for low-frequency automotive interface circuits that require multiple general-purpose amplifiers on a single supply. Its four independent channels can support sensor buffering, threshold generation, error amplification, and actuator-signal conditioning, while the 1.3 MHz gain-bandwidth product is sufficient for many slow control and body-electronics functions. The A-series ordering code is intended for automotive-oriented use, but engineers should verify the exact AEC-Q100 qualification, temperature grade, and electrical limits in the STMicroelectronics datasheet. Automotive designs should also include transient protection, input clamping, grounding, and load-disconnect analysis appropriate to the vehicle environment.

🎧

Active Audio Filtering

The LM2902AWYDT can implement low-frequency active filters in audio preamplifier, mixer, or equalizer circuitry when four related channels are required. Its 1.3 MHz gain-bandwidth product provides more bandwidth than is normally needed for voice-band and low-frequency music shaping, while the four integrated amplifiers allow separate stages for input amplification, equalization, mixing, and output buffering. General-purpose performance means it should not be selected for demanding low-noise headphone paths without checking noise, offset, and distortion requirements. Keep filter resistors and capacitors close to their associated op-amp pins, maintain a practical grounding topology, and isolate capacitive loads with series resistors when required by the stability analysis.

📐

Current-to-Voltage Conversion

The LM2902AWYDT is useful for converting a sensor or shunt current into a measurable voltage because its four amplifiers can provide instrumentation and active filtering functions around a single current-to-voltage stage. The 20 nA input bias current and 2 nA input offset current figures are especially relevant when the source impedance is high, since input-referred errors can otherwise distort the converted signal. The 1.3 MHz bandwidth is ample for many slow measurement loops and helps limit the noise bandwidth of subsequent filtering. Select feedback and balance resistors with suitable ratios and tolerances, keep the input node physically short, and verify that common-mode and output-swing requirements fit the selected supply voltage.

⚡

Power Supply Feedback Control

The LM2902AWYDT can support low-frequency power-supply feedback, error amplification, and slow-loop control functions where four amplifiers allow the design to combine sensing, error amplification, filtering, and auxiliary buffering. Its internally compensated topology and 1.3 MHz gain-bandwidth product are compatible with control loops considerably slower than switching frequencies, reducing the likelihood of excessive phase lag. The approximately 375 uA supply current is also useful in low-power regulation stages. Compensation must be derived from the plant and the selected amplifier’s open-loop response rather than copied without accounting for crossover, load, and output-stage differences. Stable layout requires a quiet reference ground, short feedback routing, and separation from high-current switching paths.

🖥️

Portable Instrumentation

The low-power characteristics of the LM2902AWYDT make it useful in portable test and measurement equipment that needs several analog channels without allocating a separate package to every amplifier. Four independent channels can process sensor inputs, generate reference signals, buffer ADC drivers, and perform local diagnostics. With a 1.3 MHz gain-bandwidth product, the device is most appropriate for measurements in the audio, control, and low-frequency instrumentation bands rather than wideband oscilloscope front ends. Battery-operated designs should account for total supply current across all four amplifiers and inactive-channel states. Precision requirements should be checked against the input offset and bias-current figures, while PCB design should minimize thermal gradients and ground-current coupling.

What is the LM2902AWYDT?
The LM2902AWYDT is a STMicroelectronics low-power quad operational amplifier containing four independent, internally compensated amplifiers in a 14-SO package. Its listed characteristics include 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, approximately 375 uA supply current, and operation from a single supply. According to the manufacturer datasheet, it is designed for general-purpose analog signal conditioning rather than high-speed or precision amplification.
What are the key specifications of LM2902AWYDT?
The LM2902AWYDT provides four op amps in a 14-SO package, with 1.3 MHz gain-bandwidth product, 100 dB open-loop gain, 375 uA supply current, 20 nA input bias current, and 2 nA input offset current. According to the manufacturer datasheet, the output stage is push-pull, frequency compensation is internal, and the device supports single-supply operation. These values place it in the general-purpose, low-power amplifier class.
Where can I download the LM2902AWYDT datasheet PDF?
The LM2902AWYDT datasheet PDF can be accessed through the STMicroelectronics document listings at Datasheets.com or the indexed manufacturer PDF at AllDataSheet. The manufacturer document identifies the device as a low-power quad operational amplifier and provides the electrical characteristics, package information, and application guidance needed for design review. Use the STMicroelectronics datasheet as the controlling document when checking limits or test conditions.
Where can I find the LM2902AWYDT pinout?
The LM2902AWYDT uses a 14-SO package, but a complete pin-number table was not present in the retrieved product excerpts. Use the pin-description diagram and connection table in the STMicroelectronics manufacturer datasheet when assigning PCB nets. This avoids relying on a generic LM2902 drawing that may differ in amplifier order, supply connections, or package orientation.
Is LM2902AWYDT suitable for automotive and industrial control systems?
The LM2902AWYDT is appropriate for general-purpose automotive and industrial signal-conditioning designs when its electrical ratings meet the system requirements. The family description specifically identifies low-power, single-supply quad operation with four independent amplifiers, while the A suffix identifies the automotive-oriented ordering code. Confirm the exact AEC-Q100 qualification status, temperature grade, and production status in the manufacturer datasheet before treating it as qualified for a specific vehicle platform.
How many amplifiers are in the LM2902AWYDT?
The LM2902AWYDT contains four independent operational amplifiers. According to the manufacturer datasheet, each amplifier is internally frequency compensated, and the device uses a common single-supply architecture. The 14-SO package therefore provides four analog channels in one IC, making it suitable for multi-channel sensor conditioning, active filtering, buffering, and control loops.
What is the gain-bandwidth product of LM2902AWYDT?
The LM2902AWYDT has a listed gain-bandwidth product of 1.3 MHz. According to the manufacturer datasheet, this is suitable for low-frequency general-purpose amplification rather than wideband signal conditioning. Closed-loop bandwidth depends on the selected noise-gain topology, so the actual usable bandwidth should be evaluated with the intended feedback network and capacitive-load conditions.
What can replace the LM2902AWYDT?
Several LM2902-family devices can serve as pin-compatible replacements when their electrical and temperature grades match the original requirements. Closely related STMicroelectronics options include LM2902WYDT, LM2902AWYD, and LM2902DT. Cross-brand possibilities include Texas Instruments LM2902D and NXP Semiconductors LM2902DR. The exact suffix, grade, and operating limits must be checked before substitution.
Is LM2902AWYDT the same as LM2902WYDT?
LM2902AWYDT and LM2902WYDT use the same 14-pin SO architecture, but the A and W ordering codes can denote different qualification or temperature grades. LM2902AWYDT is the automotive-oriented A-series code, while LM2902WYDT is the W-series version listed in the comparison results. Because the operating temperature and qualification grades are not printed in the retrieved excerpts, treat them as related alternatives rather than automatically interchangeable without datasheet verification.
Can LM2902DT replace LM2902AWYDT?
LM2902DT can serve as a same-package functional alternative to LM2902AWYDT because both are four-amplifier devices in a 14-SO outline, but the ordering codes may indicate different operating grades. The comparison data lists LM2902DT as a 14-pin SOIC general-purpose amplifier, while LM2902AWYDT is the automotive-oriented A-series part. Verify supply range, temperature rating, input offset, and qualification before approving the replacement.
LM2902AWYDT vs LM2902D - which is better for a general-purpose design?
LM2902AWYDT is the better selection when the design specifically requires the automotive-oriented A-series grade, while LM2902D is a viable general-purpose option when its listed electrical limits satisfy the application. Both provide four amplifiers in a 14-pin SOIC package, but suffix-specific temperature and qualification details determine the real difference. The STMicroelectronics and Texas Instruments datasheets should govern the final choice.
When should I choose LM2902AWYDT over another LM2902 variant?
Choose LM2902AWYDT when the circuit requires a low-power, single-supply quad amplifier and the A-series automotive grade is appropriate for the operating environment. It offers four independent channels, 1.3 MHz gain-bandwidth product, and 100 dB open-loop gain in one 14-SO package. Choose a different suffix only after checking temperature range, qualification, offset limits, and exact electrical test conditions.
Is LM2902AWYDT suitable for sensor conditioning and active filtering?
The LM2902AWYDT is suitable for many sensor-conditioning and low-frequency active-filter circuits because it combines four internally compensated amplifiers with a 1.3 MHz gain-bandwidth product and low operating current. Its suitability depends on signal amplitude, common-mode range, noise requirements, and filter topology. Use the manufacturer datasheet to select resistor and capacitor values and to check stability with the intended source and load impedances.
Where to buy LM2902AWYDT online?
Use the Request a Quote form on this page to request LM2902AWYDT pricing, stock confirmation, and lead time for the exact 14-SO ordering code. The part is listed by STMicroelectronics and indexed by major component distributors, but availability can vary by quantity and package suffix. Confirm the exact MPN, reel configuration, and production quantity with the supplier before releasing an order.
What is the lead time for LM2902AWYDT?
Lead time for LM2902AWYDT should be confirmed through the Request a Quote form on this page using the exact MPN and required quantity. The retrieved listings identify the part as available from multiple distribution channels, but they do not state a reliable quantity-dependent lead time. Production planning should therefore use a current supplier quotation rather than assuming immediate availability.
Is LM2902AWYDT in stock and what does it cost?
Current LM2902AWYDT stock and a quantity-specific quote are available through the Request a Quote form on this page. The part is identified as a 14-SO, four-channel, 1.3 MHz STMicroelectronics operational amplifier, and several listings reference inventory. Use the form to confirm lot availability, MOQ, and delivery timing for the exact ordering code.
What is the best Texas Instruments equivalent for LM2902AWYDT?
The Texas Instruments LM2902D is the closest indexed cross-brand equivalent because it is a four-channel general-purpose operational amplifier in a 14-SOIC package. Both devices occupy the same quad-amplifier package class, but the STMicroelectronics and Texas Instruments datasheets must be compared for offset voltage, bias current, bandwidth, operating temperature, and qualification. A PCB-level match does not by itself guarantee identical automotive qualification.

エンジニアリング参考データ: LM2902AWYDT — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose LM2902AWYDT for low-frequency, general-purpose analog designs needing four independent amplifiers, a single supply, and the automotive-oriented A-series ordering code. Its 1.3 MHz gain-bandwidth product and 375 uA supply current suit signal conditioning, control, filtering, and buffering rather than precision or high-speed conversion. LM2902WYDT is a same-package family option when the W-series grade better matches the environmental requirements. LM2902AWYD and LM2902DT can also support footprint-compatible designs, but their suffix-specific temperature and qualification details must be checked. Texas Instruments LM2902D or NXP LM2902DR are useful cross-brand alternatives for nonautomotive systems after comparing offset, bias current, common-mode limits, supply range, and qualification. For any automotive production design, verify the exact grade and approval status in the selected manufacturer’s datasheet.

代替品との比較

パラメータ この製品 LM2902WYDT LM2902AWYD LM2902DT LM2902D LM2902DR
Package 14-SO 14-SO 14-SO 14-SO 14-SOIC 14-SO
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics Texas Instruments NXP Semiconductors
Number of Amplifiers 4 4 4 4 4 4
Amplifier Type General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier General-purpose operational amplifier

主な差別化要因

  • Automotive-oriented ordering code within a well-known quad amplifier family (vs LM2902WYDT)
  • Four independent general-purpose amplifiers in one package (vs LM2902D)
  • Single-supply operation with internal frequency compensation (vs LM2902DR)

設計ノート

Place the bypass capacitor and the amplifier pins carrying high-frequency current close together, especially when the LM2902AWYDT supplies signals through long PCB traces. Keep each feedback loop compact and route it away from power-switching nodes and inductors. Use a continuous ground reference under the device when the board layout permits, but follow the manufacturer package drawing for exposed-pad or lead-frame grounding requirements. A single-supply circuit should share the analog and return paths carefully to avoid injecting supply ripple into the signal reference.

Do not assume that every LM2902 suffix has identical temperature or qualification requirements. The LM2902AWYDT includes an A-series ordering code, while LM2902WYDT, LM2902AWYD, LM2902DT, Texas Instruments LM2902D, and NXP LM2902DR can differ in grade or manufacturer-specific limits. Before substitution, compare supply range, common-mode range, output swing, offset, bias current, bandwidth, temperature rating, and automotive qualification. The shared 14-pin package establishes a physical starting point, not complete electrical equivalence.

Use short, direct input routes for high-impedance sensor nodes because the listed 20 nA input bias current and 2 nA input offset current can create meaningful errors when source resistance is high. Add a small protection or bias network at exposed inputs only after checking its effect on noise and bandwidth. For capacitive loads, evaluate stability using the recommended output isolation resistor and account for the added voltage drop. The 1.3 MHz gain-bandwidth product should be compared with the intended noise-gain curve rather than treated as a fixed closed-loop bandwidth.

Estimated: at a 12 V supply and approximately 375 uA supply current per amplifier, one active LM2902AWYDT amplifier dissipates about 4.5 mW, and four active amplifiers dissipate about 18 mW before output-current losses. The calculation uses 12 V and 375 uA per amplifier. Actual consumption rises with output current, so verify all four channels, output loads, supply tolerance, and temperature rise during worst-case operation.

コンプライアンス情報

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The LCSC product listing identifies LM2902AWYDT as RoHS compliant. Other compliance declarations and the exact automotive qualification status require confirmation from the manufacturer product documentation.

データ検証日: 2026-11-17 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

LM2902AWYDT datasheet LM2902AWYDT pinout LM2902AWYDT datasheet pdf LM2902AWYDT equivalent LM2902AWYDT replacement LM2902AWYDT cross reference LM2902AWYDT vs LM2902WYDT LM2902AWYDT price LM2902AWYDT stock STMicroelectronics LM2902AWYDT LM2902AWYDT 14-SO amplifier LM2902AWYDT 1.3MHz operational amplifier LM2902AWYDT automotive sensor circuit

関連部品&用語

STMicroelectronics LM2902AWYDT LM2902WYDT LM2902AWYD LM2902DT Texas Instruments LM2902D NXP Semiconductors LM2902DR operational amplifier op amp quad operational amplifier low-power operational amplifier single-supply amplifier internally compensated amplifier push-pull output stage 14-SO package SOIC surface-mount package gain-bandwidth product open-loop gain input bias current input offset current sensor conditioning automotive electronics
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示