LM2903VQPWR - Dual 36V Comparator | Texas Instruments
部品番号: LM2903VQPWR ✓ 生産中LM2903VQPWR 概要
A dual comparator is an analog integrated circuit that compares two input voltages and produces a digital-level output indicating which input is higher. As a comparator within the broader analog IC and semiconductor hierarchy, the LM2903VQPWR provides the conversion of small analog voltage differences into logic-compatible decisions. Its two independent channels can monitor two thresholds, or they can be combined for window comparison and other system-level functions.
The principal features include two independent comparators, a wide 2 V to 36 V supply range, rail-to-rail input capability, open-collector outputs, and an operating temperature range of -40°C to +125°C. The open-collector outputs require an external pull-up resistor and allow several outputs to be connected for wired-AND behavior. This architecture is useful when driving open-drain logic, relay interfaces, or indicators with a compatible pull-up voltage.
The LM2903 family is designed for general-purpose comparison rather than continuous analog amplification. Each channel compares an inverting input with a non-inverting input, while its output changes state according to the input relationship. Rail-to-rail input behavior allows the input voltages to approach the supply rails, although common-mode and output-state details should be checked against the manufacturer datasheet for the exact operating conditions.
Typical uses include threshold detection, industrial sensor interfaces, overvoltage and undervoltage monitoring, control-system signal conditioning, and open-collector logic interfaces. The 8-pin TSSOP package supports compact surface-mount layouts, while the -40°C to +125°C temperature range makes the device suitable for industrial and automotive-style environments when the complete system requirements support that operating range.
For PCB design, reserve the pull-up network required by the open-collector outputs and keep comparator input routing away from high-current switching paths. Account for input common-mode limits, output pull-up voltage, supply decoupling, and logic thresholds in the connected system. The manufacturer pin-description table should be used directly when assigning PCB tracks and confirming the numbering of the PW package.
This product page consolidates the core electrical characteristics, replacement options, application guidance, and package-level design considerations into a practical selection reference. It also provides a parameter-by-parameter comparison that helps engineers distinguish standard, automotive, and lead-free orderable variants before committing to a PCB footprint.
ドロップイン代替品: LM2903VQPWR — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LM2903VQPWR (同一形状・フットプリント) — 相違点: Comparator Type, Number of Channels, Package, Supply Configuration, Operating Temperature Range.
LM2903VQPWRQ1
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2903VQPWRG4Q1
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2903PWRG4
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2903QPWRQ1
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2903PWR
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2903VQPWR 最大定格&電気的特性
| Comparator Type | Dual differential comparator |
| Number of Channels | 2 independent channels |
| Supply Voltage Range | 2 V to 36 V |
| Input Common-Mode Range | Rail-to-rail |
| 出力タイプ | Open-collector |
| 動作温度範囲 | -40°C to +125°C |
| パッケージ | 8-pin TSSOP (PW) |
| Package Type | TSSOP-8 surface-mount package |
| 実装タイプ | Surface mount |
| ピン数 | 8 pins |
| Comparator Input Type | Inverting and non-inverting differential inputs |
| Supply Configuration | Single supply or dual supply |
| Output Pull-Up Requirement | External pull-up resistor required |
LM2903VQPWR tssop-8 surface-mount package ピン配置ガイド
LM2903VQPWR (tssop-8 surface-mount package パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: LM2903VQPWR.
詳細は データシート をご参照ください。
主な用途
LM2903VQPWR の用途: 6 件s: Industrial Threshold Detection, Overvoltage and Undervoltage Monitoring, Automotive Sensor Conditioning, Relay and Open-Drain Interface, Battery Monitoring, Digital Control Signal Conditioning.
Industrial Threshold Detection
The LM2903VQPWR is well suited to industrial threshold detection because it combines two independent differential comparators with a 2 V to 36 V operating range and a -40°C to +125°C temperature specification. Each channel can compare a sensor signal against a reference voltage and convert the result into an open-collector logic event. Use an external pull-up resistor to establish the logic-high level, and route the two channels separately when monitoring overvoltage and undervoltage conditions. The wide supply range permits operation across common industrial voltage ranges, while the TSSOP package supports compact control hardware.
おすすめ
Overvoltage and Undervoltage Monitoring
The two channels in the LM2903VQPWR can implement independent overvoltage and undervoltage monitoring around a common reference node. One comparator handles the upper threshold while the other handles the lower threshold, allowing the system to identify whether an input remains inside a permitted operating window. Its 2 V to 36 V supply range supports a broad range of monitored rails, and the open-collector outputs can drive fault indicators or wired-AND logic through suitable pull-up networks. The -40°C to +125°C rating supports industrial environments where threshold accuracy and operating range are important design constraints.
おすすめ
Automotive Sensor Conditioning
LM2903VQPWRQ1 provides the same dual-comparator and 2 V to 36 V operating architecture in an automotive-oriented ordering variant for sensor-conditioning and safety-monitoring circuits. A sensor signal can be compared with a precise reference, after which the open-collector output provides a flexible interface to logic, lamp drivers, or fault-reporting circuits. The PW TSSOP package supports compact board layouts, while the documented -40°C to +125°C range accommodates demanding vehicle environments. Engineers should verify the complete Q1 qualification details, input common-mode behavior, and pull-up voltage against the manufacturer datasheet.
おすすめ
Relay and Open-Drain Interface
The open-collector outputs of the LM2903VQPWR are useful when driving relay-driver stages, open-drain logic, or other devices that require a pulled-up output. Both channels can switch independent loads, and multiple open-collector outputs may share a pull-up when a wired-AND fault structure is appropriate. This arrangement reduces the need for a dedicated push-pull output driver and provides a simple way to combine fault signals. The pull-up voltage must be selected to match the downstream logic, while the supply must remain between 2 V and 36 V and the output loading must satisfy the device limits.
おすすめ
Battery Monitoring
The LM2903VQPWR can monitor two battery-related voltage thresholds by assigning one comparator to a high-limit event and the other to a low-limit event. Its 2 V to 36 V operating range is appropriate for many battery packs and industrial energy systems, while the two independent channels reduce the component count compared with separate single comparators. The open-collector results can feed a controller, charger, or fault indicator through pull-up networks. Designers should verify the common-mode range at each battery voltage, include suitable filtering for noisy sources, and account for the comparator’s switching behavior during threshold crossings.
おすすめ
Digital Control Signal Conditioning
The LM2903VQPWR can convert analog control signals into open-collector digital events for controllers, counters, and programmable logic interfaces. Each differential comparator evaluates an incoming control voltage against a reference, and its output can pull a logic rail low when the selected condition is met. The 2 V to 36 V supply range provides flexibility in industrial control systems, and the TSSOP package reduces board area compared with larger dual-comparator packages. Pull-up resistors should be placed near the receiving logic when trace length is significant, and input traces should remain away from switching nodes to avoid false threshold transitions.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM2903VQPWR — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM2903VQPWRQ1 | LM2903VQPWRG4Q1 | LM2903PWRG4 | LM2903QPWRQ1 | LM2903PWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) | 8-pin TSSOP (PW) |
| Comparator Type | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator | Dual differential comparator |
| Number of Channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels | 2 independent channels |
| Operating Voltage Range | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V | 2 V to 36 V |
| Output Type | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector | Open-collector |
| Input Common-Mode Range | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail | Rail-to-rail |
| Qualification Class | Standard | Automotive Q1 | Automotive Q1 and G4 | Standard G4 | Automotive Q1 | Standard |
| Special Feature | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs | Rail-to-rail inputs and open-collector outputs |
主な差別化要因
- Two independent comparators in one package (vs LM2901AVQPWR)
- Wide operating-voltage range (vs LM2901AVQPWR)
- Automotive-oriented ordering options (vs LM2903PWR)
- Open-collector interface flexibility (vs LM2903VQPWRQ1)
設計ノート
Do not treat an open-collector output as a push-pull logic output. Each output requires an external pull-up resistor, and the selected pull-up voltage must remain compatible with the connected logic and the comparator’s output limits. When several outputs share a pull-up, verify that the resulting wired-AND behavior is intentional and that the total sink-current requirement remains within the device limit.
Place pull-up resistors close to the logic devices that receive the open-collector signals, especially when traces are long or the board contains switching nodes. Route the two differential input pairs as compact, matched paths where practical, and maintain separation from power inductors, relay contacts, and high-current return paths. Confirm all pin assignments from the manufacturer pin-description table before releasing the PCB layout.
Use the manufacturer’s recommended bypass arrangement at the supply pins and keep the supply decoupling loop compact. Although the comparator accepts a broad 2 V to 36 V operating range, the connected pull-up network, input references, and output loads may impose tighter limits. Check the complete operating-voltage boundary for every external component instead of applying only the comparator’s headline supply rating.
For noisy sensor or battery signals, filter the input sufficiently to prevent comparator chatter near the switching threshold. The input network must not distort the intended threshold relationship or exceed the allowable input bias and common-mode behavior. Use hysteresis or positive feedback when repeated switching around a noisy reference would otherwise generate excessive output transitions.
コンプライアンス情報
Compliance declarations were not stated for the exact orderable MPN. The Q1 variants are automotive-oriented, but the exact AEC-Q100 status must be confirmed from the manufacturer ordering and qualification documentation.