LM2904AVQDRQ1 - 26V 700kHz Dual Op Amp | Texas Instruments
部品番号: LM2904AVQDRQ1 ✓ 生産中LM2904AVQDRQ1 概要
An operational amplifier, commonly abbreviated op amp, is an analog signal-processing IC that compares an input voltage with a feedback reference and drives its output to reduce the difference between them. A dual operational amplifier combines two amplifiers in one package, reducing board area and simplifying dual-channel or differential signal-chain designs. The LM2904-Q1 family extends the widely recognized LM2904 architecture with automotive qualification under AEC-Q100 requirements.
The LM2904AVQDRQ1 provides a 26 V maximum supply rating, a 700 kHz gain-bandwidth product, and an operating temperature range of -40°C to +125°C. Its low-supply-current design supports power-constrained systems, while the high-voltage capability accommodates automotive and industrial transients when paired with appropriate protection. The device also includes ESD protection exceeding 500 V under MIL-STD-883, Method 3015 and exceeding 200 V using the machine model.
Internally, the LM2904 family uses two independent, high-gain, frequency-compensated operational-amplifier channels. Internal compensation removes the need for an external frequency-compensation network in typical closed-loop gain configurations. This characteristic simplifies PCB design and supports common amplifier arrangements such as voltage followers, non-inverting gain stages, inverting amplifiers, comparators, and transducers with differential outputs.
Typical applications include automotive sensor interfaces, low-side current measurement, pressure and temperature conditioning, battery monitoring, audio preamplification, and general-purpose control modules. Its dual-channel organization is particularly useful when a design needs one amplifier for signal conditioning and another for filtering, buffering, or an independent control function.
Designers should verify the input common-mode range and output-swing limits against the actual supply voltage and signal range. The datasheet pin configuration should be used directly during PCB routing, particularly because the dual amplifier shares common supply pins. Input and output paths should also be kept away from switching-current loops to minimize coupled noise.
This page combines manufacturer qualification details, a focused replacement comparison, and practical circuit-level guidance for engineers evaluating the LM2904AVQDRQ1 in automotive and industrial analog signal chains. The product is an operational amplifier, a linear amplifier, an analog IC, and a semiconductor device designed for voltage feedback and signal-conditioning applications.
ドロップイン代替品: LM2904AVQDRQ1 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LM2904AVQDRQ1 (同一形状・フットプリント) — 相違点: Amplifier Type, Package, Number of Channels, Slew Rate, Supply Current.
LM2904B-Q1
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LM2904BA-Q1
✅ ドロップイン📋 参考代替品(カタログ未掲載)
LM2904AVQDRG4Q1
✅ ドロップイン価格はお問い合わせください
データシートを見る →LM2904-Q1
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
LM2904DR
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →LM2904AVQDRQ1 最大定格&電気的特性
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 700 kHz |
| パッケージ | 8-pin SOIC (D) |
| 動作温度範囲 | -40°C to +125°C |
| Automotive Qualification | AEC-Q100 qualified |
| Compensation | Internal frequency compensation |
| 電源電流 | Low supply current; exact value not stated |
| ESD Protection, MIL-STD-883 Method 3015 | Exceeds 500 V |
| ESD Protection, Machine Model | Exceeds 200 V at 200 pF |
| 実装タイプ | Surface mount |
LM2904AVQDRQ1 8-pin soic (d) ピン配置ガイド
LM2904AVQDRQ1 (8-pin soic (d) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: LM2904AVQDRQ1.
詳細は データシート をご参照ください。
主な用途
LM2904AVQDRQ1 の用途: 6 件s: Automotive Sensor Signal Conditioning, Low-Side Current Sensing, Automotive Battery Monitoring, Pressure and Temperature Transducer Interface, Audio Preamplification, Industrial Control and Monitoring.
Automotive Sensor Signal Conditioning
The LM2904AVQDRQ1 is well suited to conditioning automotive sensor signals because it combines two amplifiers, a 26 V maximum supply rating, AEC-Q100 qualification, and an operating temperature range of -40°C to +125°C. One channel can amplify a sensor output while the other buffers a reference or handles an auxiliary analog signal. The manufacturer family is intended for general-purpose automotive applications, and its frequency-compensated architecture simplifies stable closed-loop design. Engineers should verify the exact input common-mode range and output-swing limits against the chosen supply and sensor signal range.
おすすめ
Low-Side Current Sensing
The LM2904AVQDRQ1 can amplify the small differential voltage developed across a low-side current shunt while its second channel performs filtering, buffering, or reference conditioning. Its dual general-purpose architecture reduces the component count for compact measurement modules, and the 700 kHz bandwidth is appropriate for many moderate-bandwidth current-feedback signals. The 26 V supply capability also suits systems with elevated rail voltage. Final gain, shunt resistance, input offset, common-mode range, and output drive must be checked in the completed circuit.
おすすめ
Automotive Battery Monitoring
The LM2904AVQDRQ1 fits battery-monitoring modules that must amplify or buffer voltage-divider signals in an automotive electrical environment. Its 26 V maximum supply rating provides headroom above a 12 V vehicle battery for appropriately designed transient protection, while the -40°C to +125°C range addresses temperature variation. Two independent channels can process two battery-related voltages, such as pack and auxiliary measurements. The design must include appropriate transient protection, validate input and output limits under the minimum and maximum battery conditions, and keep high-current return paths away from sensitive analog traces.
おすすめ
Pressure and Temperature Transducer Interface
The LM2904AVQDRQ1 can serve as the analog front end for resistive pressure or temperature sensors whose outputs require amplification before conversion. One amplifier channel may condition the sensor signal, while the second can provide a buffered reference or active low-pass filter. Its internal frequency compensation supports straightforward closed-loop operation, and the dual SOIC-8 package helps limit board area. Sensor excitation current, bridge or divider impedance, amplifier offset, input bias behavior, and common-mode limits should be considered together to avoid loading or saturation.
おすすめ
Audio Preamplification
The LM2904AVQDRQ1 can provide general-purpose preamplification for low-level audio or control signals when a wide supply range and dual-channel convenience are more important than low-noise performance. The two amplifiers can handle left and right channels in an 8-pin SOIC package, while the 700 kHz bandwidth covers a broad audio range. The 26 V maximum supply permits operation from appropriately selected lower rails as well. Verify the exact input noise, output swing, channel-matching requirements, and load capability against the manufacturer limits before using the device in a high-fidelity path.
おすすめ
Industrial Control and Monitoring
The LM2904AVQDRQ1 supports general-purpose industrial control and monitoring functions such as conditioning sensor outputs, amplifying error signals, and driving analog control stages. Its dual-channel configuration allows a compact implementation with one channel in a feedback loop and the second serving as a comparator or buffer. The 26 V supply rating accommodates suitable 24 V industrial systems when transient and input-range requirements are met, while the -40°C to +125°C operating range covers extended temperature environments. Confirm EMI behavior, grounding, output loading, and stability with the final component values.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LM2904AVQDRQ1 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LM2904B-Q1 | LM2904BA-Q1 | LM2904AVQDRG4Q1 | LM2904 |
|---|---|---|---|---|---|
| Package | SOIC-8 (D) | SOIC-8 (D) - same | SOIC-8 (D) - same | SOIC-8 (D) - same | SOIC-8 (D) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Maximum Supply Voltage | 26 V | 26 V | 26 V | 26 V | 26 V |
| Gain-Bandwidth Product | 700 kHz | 700 kHz class | 700 kHz class | 700 kHz class | 700 kHz |
| Number of Amplifier Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 qualified | AEC-Q100 qualified | AEC-Q100 qualified | Not stated as AEC-Q100 qualified |
| Compensation | Internal frequency compensation | Internal frequency compensation | Internal frequency compensation | Internal frequency compensation | Internal frequency compensation |
| Pin Count | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins |
主な差別化要因
- Automotive-qualified in an 8-pin SOIC package (vs LM2904)
- Dual channels in one compact package (vs LM2904B-Q1)
- High-voltage general-purpose signal conditioning (vs LM2904BA-Q1)
設計ノート
Route the two amplifier channels to preserve their intended independence. Keep input traces short, place feedback components close to the relevant amplifier pins, and avoid routing sensitive signals beside the supply and ground paths of high-current peripherals. The SOIC-8 layout is compact, so maintaining separation between channels and noisy switching nodes is especially important in automotive modules.
Check the complete signal path against the device input common-mode and output-swing limits at the minimum, nominal, and maximum supply voltages. A 26 V maximum supply rating does not mean that every input and output can safely reach 26 V. Add protection appropriate to the automotive environment, and use the manufacturer datasheet’s recommended operating conditions when selecting bypass capacitance and supply limits.
Do not treat all LM2904 family suffixes as electrically identical. Before substituting LM2904B-Q1, LM2904BA-Q1, or another ordering code, compare the exact offset, input bias, common-mode range, output swing, supply current, noise, slew rate, and qualification entries. Also verify that the selected part is supplied in the required SOIC-8 configuration and pin orientation.
For low-side sensing and sensor interfaces, use a compact Kelvin-style connection where practical so that supply and ground currents do not create voltage errors in the shunt or divider path. Place the amplifier and feedback network near the source, avoid sharing narrow return paths with actuator currents, and verify that the resulting closed-loop gain and bandwidth remain stable with the intended load capacitance.
コンプライアンス情報
Texas Instruments identifies the LM2904-Q1 family as qualified for automotive use in accordance with AEC-Q100 specifications. Other compliance attributes are not stated in the product information and remain unknown.