LM2904AVQDRQ1 - 26V 700kHz Dual Op Amp | Texas Instruments
MPN: LM2904AVQDRQ1 ✓ 啟用中LM2904AVQDRQ1 概覽
An operational amplifier, commonly abbreviated op amp, is an analog signal-processing IC that compares an input voltage with a feedback reference and drives its output to reduce the difference between them. A dual operational amplifier combines two amplifiers in one package, reducing board area and simplifying dual-channel or differential signal-chain designs. The LM2904-Q1 family extends the widely recognized LM2904 architecture with automotive qualification under AEC-Q100 requirements.
The LM2904AVQDRQ1 provides a 26 V maximum supply rating, a 700 kHz gain-bandwidth product, and an operating temperature range of -40°C to +125°C. Its low-supply-current design supports power-constrained systems, while the high-voltage capability accommodates automotive and industrial transients when paired with appropriate protection. The device also includes ESD protection exceeding 500 V under MIL-STD-883, Method 3015 and exceeding 200 V using the machine model.
Internally, the LM2904 family uses two independent, high-gain, frequency-compensated operational-amplifier channels. Internal compensation removes the need for an external frequency-compensation network in typical closed-loop gain configurations. This characteristic simplifies PCB design and supports common amplifier arrangements such as voltage followers, non-inverting gain stages, inverting amplifiers, comparators, and transducers with differential outputs.
Typical applications include automotive sensor interfaces, low-side current measurement, pressure and temperature conditioning, battery monitoring, audio preamplification, and general-purpose control modules. Its dual-channel organization is particularly useful when a design needs one amplifier for signal conditioning and another for filtering, buffering, or an independent control function.
Designers should verify the input common-mode range and output-swing limits against the actual supply voltage and signal range. The datasheet pin configuration should be used directly during PCB routing, particularly because the dual amplifier shares common supply pins. Input and output paths should also be kept away from switching-current loops to minimize coupled noise.
This page combines manufacturer qualification details, a focused replacement comparison, and practical circuit-level guidance for engineers evaluating the LM2904AVQDRQ1 in automotive and industrial analog signal chains. The product is an operational amplifier, a linear amplifier, an analog IC, and a semiconductor device designed for voltage feedback and signal-conditioning applications.
直接替換替代品,適用於 LM2904AVQDRQ1 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
此系列的變體
與下列產品可直接替換的同系列型號: LM2904AVQDRQ1 (相同外形與佔位) — 差異在於 Amplifier Type, Package, Number of Channels, Slew Rate, Supply Current.
LM2904B-Q1
✅ 直接替換📋 參考替代品(不在目錄中)
LM2904BA-Q1
✅ 直接替換📋 參考替代品(不在目錄中)
LM2904AVQDRG4Q1
✅ 直接替換聯絡詢價
查看資料表 →LM2904-Q1
✅ 直接替換 ⚠️ 規格未經驗證📋 參考替代品(不在目錄中)
LM2904AVQDRQ1 最大額定值與電氣特性
| Amplifier Type | Dual general-purpose operational amplifier |
| Number of Channels | 2 channels |
| Maximum Supply Voltage | 26 V |
| Gain-Bandwidth Product | 700 kHz |
| 封裝 | 8-pin SOIC (D) |
| 工作溫度範圍 | -40°C to +125°C |
| Automotive Qualification | AEC-Q100 qualified |
| Compensation | Internal frequency compensation |
| 供應電流 | Low supply current; exact value not stated |
| ESD Protection, MIL-STD-883 Method 3015 | Exceeds 500 V |
| ESD Protection, Machine Model | Exceeds 200 V at 200 pF |
| 安裝類型 | Surface mount |
LM2904AVQDRQ1 8-pin soic (d) 腳位配置指南
LM2904AVQDRQ1(8-pin soic (d) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: LM2904AVQDRQ1.
請參閱 資料表 以查看完整腳位配置。
典型應用
LM2904AVQDRQ1 適用於 6 應用s: Automotive Sensor Signal Conditioning, Low-Side Current Sensing, Automotive Battery Monitoring, Pressure and Temperature Transducer Interface, Audio Preamplification, Industrial Control and Monitoring.
Automotive Sensor Signal Conditioning
The LM2904AVQDRQ1 is well suited to conditioning automotive sensor signals because it combines two amplifiers, a 26 V maximum supply rating, AEC-Q100 qualification, and an operating temperature range of -40°C to +125°C. One channel can amplify a sensor output while the other buffers a reference or handles an auxiliary analog signal. The manufacturer family is intended for general-purpose automotive applications, and its frequency-compensated architecture simplifies stable closed-loop design. Engineers should verify the exact input common-mode range and output-swing limits against the chosen supply and sensor signal range.
推薦
Low-Side Current Sensing
The LM2904AVQDRQ1 can amplify the small differential voltage developed across a low-side current shunt while its second channel performs filtering, buffering, or reference conditioning. Its dual general-purpose architecture reduces the component count for compact measurement modules, and the 700 kHz bandwidth is appropriate for many moderate-bandwidth current-feedback signals. The 26 V supply capability also suits systems with elevated rail voltage. Final gain, shunt resistance, input offset, common-mode range, and output drive must be checked in the completed circuit.
推薦
Automotive Battery Monitoring
The LM2904AVQDRQ1 fits battery-monitoring modules that must amplify or buffer voltage-divider signals in an automotive electrical environment. Its 26 V maximum supply rating provides headroom above a 12 V vehicle battery for appropriately designed transient protection, while the -40°C to +125°C range addresses temperature variation. Two independent channels can process two battery-related voltages, such as pack and auxiliary measurements. The design must include appropriate transient protection, validate input and output limits under the minimum and maximum battery conditions, and keep high-current return paths away from sensitive analog traces.
推薦
Pressure and Temperature Transducer Interface
The LM2904AVQDRQ1 can serve as the analog front end for resistive pressure or temperature sensors whose outputs require amplification before conversion. One amplifier channel may condition the sensor signal, while the second can provide a buffered reference or active low-pass filter. Its internal frequency compensation supports straightforward closed-loop operation, and the dual SOIC-8 package helps limit board area. Sensor excitation current, bridge or divider impedance, amplifier offset, input bias behavior, and common-mode limits should be considered together to avoid loading or saturation.
推薦
Audio Preamplification
The LM2904AVQDRQ1 can provide general-purpose preamplification for low-level audio or control signals when a wide supply range and dual-channel convenience are more important than low-noise performance. The two amplifiers can handle left and right channels in an 8-pin SOIC package, while the 700 kHz bandwidth covers a broad audio range. The 26 V maximum supply permits operation from appropriately selected lower rails as well. Verify the exact input noise, output swing, channel-matching requirements, and load capability against the manufacturer limits before using the device in a high-fidelity path.
推薦
Industrial Control and Monitoring
The LM2904AVQDRQ1 supports general-purpose industrial control and monitoring functions such as conditioning sensor outputs, amplifying error signals, and driving analog control stages. Its dual-channel configuration allows a compact implementation with one channel in a feedback loop and the second serving as a comparator or buffer. The 26 V supply rating accommodates suitable 24 V industrial systems when transient and input-range requirements are met, while the -40°C to +125°C operating range covers extended temperature environments. Confirm EMI behavior, grounding, output loading, and stability with the final component values.
推薦
推薦產品摘要
工程參考資料,適用於 LM2904AVQDRQ1 — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | LM2904B-Q1 | LM2904BA-Q1 | LM2904AVQDRG4Q1 | LM2904 |
|---|---|---|---|---|---|
| Package | SOIC-8 (D) | SOIC-8 (D) - same | SOIC-8 (D) - same | SOIC-8 (D) - same | SOIC-8 (D) - same |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Maximum Supply Voltage | 26 V | 26 V | 26 V | 26 V | 26 V |
| Gain-Bandwidth Product | 700 kHz | 700 kHz class | 700 kHz class | 700 kHz class | 700 kHz |
| Number of Amplifier Channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 qualified | AEC-Q100 qualified | AEC-Q100 qualified | Not stated as AEC-Q100 qualified |
| Compensation | Internal frequency compensation | Internal frequency compensation | Internal frequency compensation | Internal frequency compensation | Internal frequency compensation |
| Pin Count | 8 pins | 8 pins | 8 pins | 8 pins | 8 pins |
主要差異化特點
- Automotive-qualified in an 8-pin SOIC package (對比LM2904)
- Dual channels in one compact package (對比LM2904B-Q1)
- High-voltage general-purpose signal conditioning (對比LM2904BA-Q1)
設計說明
Route the two amplifier channels to preserve their intended independence. Keep input traces short, place feedback components close to the relevant amplifier pins, and avoid routing sensitive signals beside the supply and ground paths of high-current peripherals. The SOIC-8 layout is compact, so maintaining separation between channels and noisy switching nodes is especially important in automotive modules.
Check the complete signal path against the device input common-mode and output-swing limits at the minimum, nominal, and maximum supply voltages. A 26 V maximum supply rating does not mean that every input and output can safely reach 26 V. Add protection appropriate to the automotive environment, and use the manufacturer datasheet’s recommended operating conditions when selecting bypass capacitance and supply limits.
Do not treat all LM2904 family suffixes as electrically identical. Before substituting LM2904B-Q1, LM2904BA-Q1, or another ordering code, compare the exact offset, input bias, common-mode range, output swing, supply current, noise, slew rate, and qualification entries. Also verify that the selected part is supplied in the required SOIC-8 configuration and pin orientation.
For low-side sensing and sensor interfaces, use a compact Kelvin-style connection where practical so that supply and ground currents do not create voltage errors in the shunt or divider path. Place the amplifier and feedback network near the source, avoid sharing narrow return paths with actuator currents, and verify that the resulting closed-loop gain and bandwidth remain stable with the intended load capacitance.
合規資訊
Texas Instruments identifies the LM2904-Q1 family as qualified for automotive use in accordance with AEC-Q100 specifications. Other compliance attributes are not stated in the product information and remain unknown.