Texas Instruments

LM2904AVQDRQ1 - 26V 700kHz Dual Op Amp | Texas Instruments

Teilenummer: LM2904AVQDRQ1 ✓ Aktiv
26 V Vdss Low supply current; exact value not stated Id 8-pin SOIC (D) Package
MOQ: 1 |

LM2904AVQDRQ1 Übersicht

The Texas Instruments LM2904AVQDRQ1 is an automotive-grade, dual operational amplifier rated for 26 V supply operation and 700 kHz gain-bandwidth performance, housed in an 8-pin SOIC package. The device contains two independent, general-purpose amplifiers with frequency compensation, making it suitable for signal conditioning, sensor amplification, and automotive electronic control systems.

An operational amplifier, commonly abbreviated op amp, is an analog signal-processing IC that compares an input voltage with a feedback reference and drives its output to reduce the difference between them. A dual operational amplifier combines two amplifiers in one package, reducing board area and simplifying dual-channel or differential signal-chain designs. The LM2904-Q1 family extends the widely recognized LM2904 architecture with automotive qualification under AEC-Q100 requirements.

The LM2904AVQDRQ1 provides a 26 V maximum supply rating, a 700 kHz gain-bandwidth product, and an operating temperature range of -40°C to +125°C. Its low-supply-current design supports power-constrained systems, while the high-voltage capability accommodates automotive and industrial transients when paired with appropriate protection. The device also includes ESD protection exceeding 500 V under MIL-STD-883, Method 3015 and exceeding 200 V using the machine model.

Internally, the LM2904 family uses two independent, high-gain, frequency-compensated operational-amplifier channels. Internal compensation removes the need for an external frequency-compensation network in typical closed-loop gain configurations. This characteristic simplifies PCB design and supports common amplifier arrangements such as voltage followers, non-inverting gain stages, inverting amplifiers, comparators, and transducers with differential outputs.

Typical applications include automotive sensor interfaces, low-side current measurement, pressure and temperature conditioning, battery monitoring, audio preamplification, and general-purpose control modules. Its dual-channel organization is particularly useful when a design needs one amplifier for signal conditioning and another for filtering, buffering, or an independent control function.

Designers should verify the input common-mode range and output-swing limits against the actual supply voltage and signal range. The datasheet pin configuration should be used directly during PCB routing, particularly because the dual amplifier shares common supply pins. Input and output paths should also be kept away from switching-current loops to minimize coupled noise.

This page combines manufacturer qualification details, a focused replacement comparison, and practical circuit-level guidance for engineers evaluating the LM2904AVQDRQ1 in automotive and industrial analog signal chains. The product is an operational amplifier, a linear amplifier, an analog IC, and a semiconductor device designed for voltage feedback and signal-conditioning applications.

Drop-in-Alternativen für LM2904AVQDRQ1 – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit LM2904AVQDRQ1 (gleiche Bauform und Footprint) – abweichend in Amplifier Type, Package, Number of Channels, Slew Rate, Supply Current.

Texas Instruments
Amplifier Type: General-purpose operational amplifier
Package: 8-SOIC, 0.154 in body width
Slew Rate: 0.3 V/µs
Vergleichen mit LM2904AVQDRQ1 →
Texas Instruments
Amplifier Type: General Purpose
Package: 8-SOIC (D)
Number of Channels: 2
Vergleichen mit LM2904AVQDRQ1 →

LM2904B-Q1

✅ Drop-In
📦 SOIC-8 (D)
The 26 V supply rating and 700 kHz class of operation are unchanged, while the B-family electrical characteristics must be checked against the original device.

📋 Referenzalternative (nicht im Katalog)

LM2904BA-Q1

✅ Drop-In
📦 SOIC-8 (D)
The 26 V supply rating and 700 kHz class of operation are unchanged, while the BA-family electrical characteristics must be checked against the original device.

📋 Referenzalternative (nicht im Katalog)

LM2904AVQDRG4Q1

✅ Drop-In
Texas Instruments
📦 SOIC-8 (D)
General-purpose operational amplifier · 2 circuits · 26 V · 700 kHz · 0.3 V/µs · Frequency-compensated dual amplifier · AEC-Q100 qualified · 8-SOIC, 0.154 in body width

Preis auf Anfrage

Datenblatt ansehen →

LM2904-Q1

✅ Drop-In ⚠️ Spezifikationen ungeprüft
📦 SOIC-8 (D)
The 26 V supply rating, 700 kHz class of operation, and 8-pin channel count are unchanged, but the family name must be resolved to an orderable suffix.

📋 Referenzalternative (nicht im Katalog)

LM2904DR

✅ Drop-In ⚠️ Spezifikationen ungeprüft
Texas Instruments
📦 SOIC-8 (D)
2 · 3 V to 26 V · ±1.5 V to ±13 V · 700 kHz · 0.3 V/us · 2 mV (typical) · 500 uA (typical) · 0.7 mA (typical)

Preis auf Anfrage

Datenblatt ansehen →

LM2904AVQDRQ1 Grenzwerte & elektrische Eigenschaften

Amplifier Type Dual general-purpose operational amplifier
Number of Channels 2 channels
Maximum Supply Voltage 26 V
Gain-Bandwidth Product 700 kHz
Gehäuse 8-pin SOIC (D)
Betriebstemperaturbereich -40°C to +125°C
Automotive Qualification AEC-Q100 qualified
Compensation Internal frequency compensation
Versorgungsstrom Low supply current; exact value not stated
ESD Protection, MIL-STD-883 Method 3015 Exceeds 500 V
ESD Protection, Machine Model Exceeds 200 V at 200 pF
Montageart Surface mount

LM2904AVQDRQ1 8-pin soic (d) Pinbelegungsleitfaden

Pinbelegung für LM2904AVQDRQ1 (8-pin soic (d)-Gehäuse). Dieses analoge Bauteil verfügt über Eingangs-, Ausgangs- und Versorgungspins. Offset-Null-, Kompensations- und Enable-Pin-Konfigurationen entnehmen Sie dem Herstellerdatenblatt. Ideal für Signalaufbereitung und Verstärkerschaltungen.

Pinbelegungsdiagramm für LM2904AVQDRQ1 im 8-pin soic (d)-Gehäuse

Keine detaillierten Pinbelegungsdaten verfügbar für LM2904AVQDRQ1.

Siehe die Datenblatt für die vollständige Pin-Konfiguration.

Typische Anwendungen

LM2904AVQDRQ1 ist geeignet für 6 Anwendungs: Automotive Sensor Signal Conditioning, Low-Side Current Sensing, Automotive Battery Monitoring, Pressure and Temperature Transducer Interface, Audio Preamplification, Industrial Control and Monitoring.

🚗

Automotive Sensor Signal Conditioning

The LM2904AVQDRQ1 is well suited to conditioning automotive sensor signals because it combines two amplifiers, a 26 V maximum supply rating, AEC-Q100 qualification, and an operating temperature range of -40°C to +125°C. One channel can amplify a sensor output while the other buffers a reference or handles an auxiliary analog signal. The manufacturer family is intended for general-purpose automotive applications, and its frequency-compensated architecture simplifies stable closed-loop design. Engineers should verify the exact input common-mode range and output-swing limits against the chosen supply and sensor signal range.

⚡

Low-Side Current Sensing

The LM2904AVQDRQ1 can amplify the small differential voltage developed across a low-side current shunt while its second channel performs filtering, buffering, or reference conditioning. Its dual general-purpose architecture reduces the component count for compact measurement modules, and the 700 kHz bandwidth is appropriate for many moderate-bandwidth current-feedback signals. The 26 V supply capability also suits systems with elevated rail voltage. Final gain, shunt resistance, input offset, common-mode range, and output drive must be checked in the completed circuit.

🔋

Automotive Battery Monitoring

The LM2904AVQDRQ1 fits battery-monitoring modules that must amplify or buffer voltage-divider signals in an automotive electrical environment. Its 26 V maximum supply rating provides headroom above a 12 V vehicle battery for appropriately designed transient protection, while the -40°C to +125°C range addresses temperature variation. Two independent channels can process two battery-related voltages, such as pack and auxiliary measurements. The design must include appropriate transient protection, validate input and output limits under the minimum and maximum battery conditions, and keep high-current return paths away from sensitive analog traces.

🌡️

Pressure and Temperature Transducer Interface

The LM2904AVQDRQ1 can serve as the analog front end for resistive pressure or temperature sensors whose outputs require amplification before conversion. One amplifier channel may condition the sensor signal, while the second can provide a buffered reference or active low-pass filter. Its internal frequency compensation supports straightforward closed-loop operation, and the dual SOIC-8 package helps limit board area. Sensor excitation current, bridge or divider impedance, amplifier offset, input bias behavior, and common-mode limits should be considered together to avoid loading or saturation.

🎧

Audio Preamplification

The LM2904AVQDRQ1 can provide general-purpose preamplification for low-level audio or control signals when a wide supply range and dual-channel convenience are more important than low-noise performance. The two amplifiers can handle left and right channels in an 8-pin SOIC package, while the 700 kHz bandwidth covers a broad audio range. The 26 V maximum supply permits operation from appropriately selected lower rails as well. Verify the exact input noise, output swing, channel-matching requirements, and load capability against the manufacturer limits before using the device in a high-fidelity path.

🏭

Industrial Control and Monitoring

The LM2904AVQDRQ1 supports general-purpose industrial control and monitoring functions such as conditioning sensor outputs, amplifying error signals, and driving analog control stages. Its dual-channel configuration allows a compact implementation with one channel in a feedback loop and the second serving as a comparator or buffer. The 26 V supply rating accommodates suitable 24 V industrial systems when transient and input-range requirements are met, while the -40°C to +125°C operating range covers extended temperature environments. Confirm EMI behavior, grounding, output loading, and stability with the final component values.

Zusammenfassung der empfohlenen Produkte

LM2904-Q1 Automotive dual operational amplifier family Verwendet in: Automotive Sensor Signal Conditioning, Pressure and Temperature Transducer Interface, Industrial Control and Monitoring MC3403DR Texas Instruments Verwendet in: Automotive Sensor Signal Conditioning, Low-Side Current Sensing, Automotive Battery Monitoring, Industrial Control and Monitoring LM2904B-Q1 Same-family automotive dual amplifier alternative Verwendet in: Low-Side Current Sensing, Audio Preamplification LM2904BA-Q1 Same-family automotive dual amplifier candidate Verwendet in: Automotive Battery Monitoring TS972IQT STMicroelectronics Verwendet in: Pressure and Temperature Transducer Interface TS974IQT Audio-focused dual amplifier option Verwendet in: Audio Preamplification
What is the LM2904AVQDRQ1?
The LM2904AVQDRQ1 is a Texas Instruments dual operational amplifier rated for operation from a single supply up to 26 V, with a 700 kHz gain-bandwidth product. It is packaged in an 8-pin SOIC and belongs to the automotive-qualified LM2904-Q1 family. According to the Texas Instruments product page, the device is qualified in accordance with AEC-Q100 specifications and is intended for general-purpose automotive and industrial signal-conditioning circuits.
What are the key specifications of LM2904AVQDRQ1 that engineers should know?
The LM2904AVQDRQ1 combines two internally compensated operational amplifiers, a 26 V maximum supply rating, a 700 kHz gain-bandwidth product, and an operating range of -40°C to +125°C in an 8-pin SOIC. Texas Instruments also identifies the family as AEC-Q100 qualified for automotive use. Its specified ESD performance exceeds 500 V under MIL-STD-883, Method 3015 and exceeds 200 V using the machine model.
What is the operating voltage of LM2904AVQDRQ1?
The LM2904AVQDRQ1 supports single-supply operation with a maximum supply rating of 26 V. According to the Texas Instruments LM2904-Q1 product information, the device is a dual, 26 V, 700 kHz operational amplifier. Actual usable signal and output ranges also depend on the selected supply voltage and the input common-mode and output-swing limits defined in the manufacturer datasheet.
Where can I download the LM2904AVQDRQ1 datasheet PDF?
The official LM2904AVQDRQ1 documentation is available through the Texas Instruments LM2904-Q1 product page and its linked manufacturer datasheet. The product page identifies the part as an automotive-grade, dual, 26 V, 700 kHz operational amplifier in an 8-pin SOIC package. Use the TI document for the authoritative pin description, electrical limits, test conditions, and ordering information.
Where can I find the LM2904AVQDRQ1 pinout?
The LM2904AVQDRQ1 pinout is documented in the pin-configuration section of the Texas Instruments manufacturer datasheet and shown on the official product page for the 8-pin SOIC (D) package. When assigning PCB tracks, use that diagram to identify each amplifier channel, supply connection, and output. The same SOIC-8 land pattern is required for a true drop-in replacement.
Is LM2904AVQDRQ1 suitable for automotive applications?
Yes, the LM2904AVQDRQ1 is suitable for automotive applications requiring AEC-Q100 qualification. Texas Instruments states that the LM2904-Q1 family, which includes this orderable part, is qualified for automotive use in accordance with AEC-Q100 specifications. Its stated operating-temperature range is -40°C to +125°C, and the device provides a 26 V maximum supply rating for automotive signal-conditioning systems.
What can replace the LM2904AVQDRQ1?
The closest drop-in choices are same-footprint members of the Texas Instruments LM2904 family, particularly LM2904B-Q1 and LM2904BA-Q1, when their automotive qualification and exact ordering suffix meet the design requirements. These alternatives share the SOIC-8 architecture, 26 V class of supply operation, and 700 kHz-class family positioning. Verify the exact suffix, pin configuration, electrical limits, and qualification status before production substitution.
Is LM2904AVQDRQ1 the same as LM2904B-Q1?
The LM2904AVQDRQ1 and LM2904B-Q1 are closely related Texas Instruments dual operational amplifiers in the automotive LM2904-Q1 family, but they are not necessarily identical in every electrical or qualification detail. Both use the 8-pin SOIC arrangement for this orderable configuration, and the manufacturer identifies the family as 26 V and 700 kHz. Compare the exact suffix-specific datasheet limits before treating one as a drop-in replacement.
What is the best Texas Instruments equivalent for LM2904AVQDRQ1?
LM2904B-Q1 is a leading same-brand replacement candidate because it is part of the manufacturer’s automotive-qualified LM2904-Q1 family and uses the same dual-op-amp SOIC-8 architecture. LM2904BA-Q1 is another family option. For production use, confirm that the selected orderable suffix has the required channel count, supply rating, common-mode range, output swing, temperature rating, and AEC-Q100 status.
LM2904AVQDRQ1 vs LM2904B-Q1 — which is better for an automotive sensor interface?
Choose LM2904AVQDRQ1 when the design specifically targets its orderable automotive-qualified configuration; choose LM2904B-Q1 when its suffix-specific electrical characteristics better match the sensor interface. Both families provide two channels in an SOIC-8 package and are positioned around 26 V and 700 kHz. The decisive comparison is the manufacturer’s full electrical table, including offset, common-mode range, output swing, supply current, noise, and qualification details.
When should I choose LM2904AVQDRQ1 over another dual op amp?
Choose LM2904AVQDRQ1 when an automotive system benefits from a dual amplifier with AEC-Q100 qualification, a 26 V supply rating, and a -40°C to +125°C operating range. It is especially appropriate for sensor-conditioning and general-purpose control paths that do not require the lower noise or faster settling performance of a precision amplifier. Choose a different dual op amp when rail-to-rail input operation, lower offset, or greater bandwidth is essential.
Is LM2904AVQDRQ1 appropriate for precision measurement?
The LM2904AVQDRQ1 can provide basic conditioning for moderate-accuracy measurements, but it is not automatically the best choice for precision instrumentation. Its 26 V supply capability and dual-channel configuration are useful in high-voltage signal chains, while the family’s 700 kHz bandwidth supports general-purpose amplification. For low-offset or low-noise measurement, compare the exact input offset and noise specifications against a precision amplifier before final selection.
How should I use the LM2904AVQDRQ1 in a low-side current sensor circuit?
Use one amplifier channel to amplify the small differential voltage produced across a low-side shunt, while the second channel can buffer a reference, monitor another sensor, or implement an active filter. Keep the shunt, amplifier inputs, and ground return arranged to minimize parasitic resistance and ground drops. The manufacturer’s recommended circuit and the exact input common-mode range should be checked before selecting resistor and gain values.
Does LM2904AVQDRQ1 require an external compensation capacitor?
The LM2904AVQDRQ1 is a frequency-compensated dual operational amplifier, so typical closed-loop amplifier configurations do not require an external compensation capacitor. According to the Texas Instruments family description, the device is a high-gain, frequency-compensated operational amplifier. The actual gain, bandwidth, stability, and output drive must still be evaluated together in the final circuit.
Where can I buy LM2904AVQDRQ1, and what is its lead time?
Use the Request a Quote form on this page to ask about LM2904AVQDRQ1 availability, current lead time, minimum order quantity, and the required SOIC-8 delivery configuration. Texas Instruments lists the exact orderable part on its LM2904-Q1 product page, where the manufacturer’s ordering and quality information can be consulted. Request a firm lead-time quotation for the quantity and traceable delivery requirements used in your build.

Technische Referenzdaten für LM2904AVQDRQ1 – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose LM2904AVQDRQ1 for an automotive or industrial design that needs two general-purpose amplifier channels, a 26 V maximum supply rating, a -40°C to +125°C operating range, and AEC-Q100 qualification. It is a practical fit for sensor conditioning, low-side current measurement, battery monitoring, and general control loops where moderate bandwidth and supply voltage are more important than precision or rail-to-rail performance. LM2904B-Q1 and LM2904BA-Q1 are preferred when their suffix-specific electrical characteristics provide a better match, especially in offset, common-mode range, output swing, supply current, or stability. LM2904AVQDRG4Q1 is the closest same-footprint qualification candidate when its ordering and traceability requirements fit the program. The standard LM2904 family can serve non-automotive designs, but it should not be assumed to provide the Q1 qualification. For every candidate, verify the exact orderable suffix, pin configuration, temperature grade, AEC-Q100 status, and production requirements before releasing the PCB.

Vergleich mit Alternativen

Parameter Dieses Produkt LM2904B-Q1 LM2904BA-Q1 LM2904AVQDRG4Q1 LM2904
Package SOIC-8 (D) SOIC-8 (D) - same SOIC-8 (D) - same SOIC-8 (D) - same SOIC-8 (D) - same
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Maximum Supply Voltage 26 V 26 V 26 V 26 V 26 V
Gain-Bandwidth Product 700 kHz 700 kHz class 700 kHz class 700 kHz class 700 kHz
Number of Amplifier Channels 2 channels 2 channels 2 channels 2 channels 2 channels
Automotive Qualification AEC-Q100 qualified AEC-Q100 qualified AEC-Q100 qualified AEC-Q100 qualified Not stated as AEC-Q100 qualified
Compensation Internal frequency compensation Internal frequency compensation Internal frequency compensation Internal frequency compensation Internal frequency compensation
Pin Count 8 pins 8 pins 8 pins 8 pins 8 pins

Wichtigste Unterscheidungsmerkmale

  • Automotive-qualified in an 8-pin SOIC package (vs. LM2904)
  • Dual channels in one compact package (vs. LM2904B-Q1)
  • High-voltage general-purpose signal conditioning (vs. LM2904BA-Q1)

Designhinweise

Route the two amplifier channels to preserve their intended independence. Keep input traces short, place feedback components close to the relevant amplifier pins, and avoid routing sensitive signals beside the supply and ground paths of high-current peripherals. The SOIC-8 layout is compact, so maintaining separation between channels and noisy switching nodes is especially important in automotive modules.

Check the complete signal path against the device input common-mode and output-swing limits at the minimum, nominal, and maximum supply voltages. A 26 V maximum supply rating does not mean that every input and output can safely reach 26 V. Add protection appropriate to the automotive environment, and use the manufacturer datasheet’s recommended operating conditions when selecting bypass capacitance and supply limits.

Do not treat all LM2904 family suffixes as electrically identical. Before substituting LM2904B-Q1, LM2904BA-Q1, or another ordering code, compare the exact offset, input bias, common-mode range, output swing, supply current, noise, slew rate, and qualification entries. Also verify that the selected part is supplied in the required SOIC-8 configuration and pin orientation.

For low-side sensing and sensor interfaces, use a compact Kelvin-style connection where practical so that supply and ground currents do not create voltage errors in the shunt or divider path. Place the amplifier and feedback network near the source, avoid sharing narrow return paths with actuator currents, and verify that the resulting closed-loop gain and bandwidth remain stable with the intended load capacitance.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

Texas Instruments identifies the LM2904-Q1 family as qualified for automotive use in accordance with AEC-Q100 specifications. Other compliance attributes are not stated in the product information and remain unknown.

Ähnliche Suchanfragen

LM2904AVQDRQ1 datasheet LM2904AVQDRQ1 pinout LM2904AVQDRQ1 datasheet pdf Texas Instruments LM2904AVQDRQ1 LM2904AVQDRQ1 equivalent LM2904AVQDRQ1 replacement LM2904AVQDRQ1 cross reference LM2904AVQDRQ1 SOIC-8 footprint LM2904AVQDRQ1 application circuit LM2904AVQDRQ1 price LM2904AVQDRQ1 stock LM2904AVQDRQ1 vs LM2904B-Q1 LM2904 26V 700kHz op amp LM2904Q1 automotive amplifier LM2904 automotive sensor interface

Verwandte Bauteile & Begriffe

Texas Instruments LM2904AVQDRQ1 LM2904-Q1 LM2904B-Q1 LM2904BA-Q1 LM2904 Operational Amplifier Op Amp Dual Amplifier Linear Amplifier Analog Integrated Circuit Frequency-Compensated Amplifier Signal Conditioning 26 V 700 kHz Gain-Bandwidth Product SOIC-8 Surface Mount AEC-Q100 MIL-STD-883 Method 3015 ESD Protection Automotive Electronics Low-Side Current Sensing Battery Monitoring Sensor Interface
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen