Texas Instruments

LM393TLX/NOPB - Dual 36V Comparator | Texas Instruments

部品番号: LM393TLX/NOPB ✓ 生産中
2 V to 36 V Vdss 250 nA Id 8-DSBGA Package
MOQ: 1 |

LM393TLX/NOPB 概要

Texas Instruments LM393TLX/NOPB is a dual general-purpose differential comparator with open-collector outputs, rail-to-rail input capability, and a supply-voltage rating of 2 V to 36 V. The device contains two independent comparator channels and is supplied in an 8-DSBGA package. It also provides a maximum input offset voltage of 2.0 mV, a typical input bias current of 250 nA, and a response time of approximately 700 ns.

A differential comparator is an analog integrated circuit that compares two input voltages and changes its output state when the difference crosses a selected threshold. The LM393 belongs to the comparator hierarchy within the broader semiconductor and signal-conditioning categories. Its open-collector outputs can sink current while remaining in a high-impedance state when inactive, making the device useful for wired logic interfaces, threshold detection, and systems that require an external pull-up resistor.

The LM393 provides two independent comparator elements in one package. Rail-to-rail input operation extends the usable common-mode input range toward the supply rails, while the 2 V to 36 V operating range supports low-voltage logic and higher-voltage industrial systems. Open-collector outputs support wired-AND operation and interface compatibility with CMOS, DTL, ECL, MOS, and TTL logic families. The low 250 nA input bias current reduces disturbance in high-impedance sensing circuits.

Each channel compares an inverting input with a non-inverting input. The output transistor turns on when the non-inverting input is above the inverting input, subject to the comparator's specified offset and response characteristics. Because the output is open collector, an external pull-up resistor establishes the inactive logic level. This architecture adds a passive pull-up component but offers flexibility for wired logic, level translation, and relay-driving arrangements.

Typical uses include monitoring a sensor against a reference voltage, detecting battery or power-supply thresholds, checking overvoltage and undervoltage conditions, and generating a digital status signal from an analog control loop. Industrial equipment, battery-powered systems, automotive-style monitoring circuits, and general-purpose logic interfaces can also use the two channels independently.

Design the open-collector output with a pull-up resistor sized for the required sink current, rise time, and logic-family current. Keep the comparator inputs short and place them away from switching nodes and sources of high-current return paths. Confirm that the input and output currents remain within their specified limits and that the selected pull-up voltage is appropriate for the downstream logic.

This product page combines manufacturer specifications, package information, application guidance, comparison parameters, and practical design considerations to support component selection and PCB implementation. It also identifies the limits of publicly documented drop-in substitution for this exact 8-DSBGA ordering configuration.

ドロップイン代替品: LM393TLX/NOPB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: LM393TLX/NOPB (同一形状・フットプリント) — 相違点: Output Type, Package.

Texas Instruments
Output Type: Open-Collector (CMOS, DTL, ECL, MOS, TTL compatible)
Package: 8-DSBGA (8 large 12 mil bumps), thin

この製品に利用可能なドロップイン代替品はありません。

代替品をリクエスト

LM393TLX/NOPB 最大定格&電気的特性

Comparator Type General-purpose differential comparator
Number of Elements 2
Supply Voltage Range 2 V to 36 V
Dual Supply Voltage Range ±1 V to ±18 V
Input Common-Mode Range Rail-to-rail
出力タイプ Open-collector
Compatible Logic Levels CMOS, DTL, ECL, MOS, open-collector, and TTL
Maximum Input Offset Voltage 2.0 mV
Typical Input Offset Voltage 5 mV
Typical Input Bias Current 250 nA
Typical Response Time 700 ns
パッケージ 8-DSBGA
Number of Package Balls 8 balls
Ball Pitch 12 mil

LM393TLX/NOPB 8 balls ピン配置ガイド

LM393TLX/NOPB (8 balls パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

LM393TLX/NOPB の 8 balls パッケージピン配置図

詳細なピン配置データはありません: LM393TLX/NOPB.

詳細は データシート をご参照ください。

主な用途

LM393TLX/NOPB の用途: 6 件s: Battery Threshold Monitoring, Industrial Sensor Threshold Detection, Power-Supply Overvoltage Detection, Wired-Logic Interface, Relay and Solenoid Interface, Consumer and Automotive-Style Status Monitoring.

⚡

Battery Threshold Monitoring

The LM393TLX/NOPB fits battery-threshold monitoring because its two independent channels can compare a divided battery voltage against a reference while its rail-to-rail input characteristic supports signals near the operating rails. The typical 250 nA input bias current reduces loading on a high-impedance divider, and the 2 V to 36 V supply range supports multiple rail architectures. Each open-collector output can pull down a pull-up node connected to an MCU or fault indicator. The design must keep the input common-mode voltage and absolute maximum limits valid during fast charging, load transients, and overvoltage faults.

🏭

Industrial Sensor Threshold Detection

The LM393TLX/NOPB is appropriate for industrial sensor threshold detection when a slow, low-power decision is sufficient. Its two channels can independently evaluate a sensor signal against a reference, with a maximum offset specification of 2.0 mV and a typical response time of 700 ns. The open-collector output supports a pull-up or a subsequent driver stage, and the 250 nA typical input bias current helps preserve high-impedance sensor signals. Place input routing away from motor, relay, and switching-converter paths, and verify the exact temperature grade for the environmental enclosure.

⚡

Power-Supply Overvoltage Detection

The LM393TLX/NOPB can monitor a power rail for overvoltage or undervoltage conditions by comparing a scaled rail voltage with a reference. Its 2 V to 36 V supply rating and dual-channel architecture allow two thresholds to be implemented without using two packages. The open-collector output can operate a fault latch, host interrupt, or status LED through an external pull-up. Designers should account for output rise time, choose a resistor that respects the sink-current limit, and ensure that startup overshoot or an externally disconnected supply cannot violate the input absolute maximum rating.

🌐

Wired-Logic Interface

The LM393TLX/NOPB is useful in wired-logic systems because each open-collector output can pull a shared node low and support wired-AND behavior. The output stage is compatible with the logic families identified in the LM393 specifications, including CMOS, TTL, MOS, DTL, and ECL families, although the selected pull-up voltage and sink current must be checked against the actual receiver. This arrangement reduces the number of output drivers when several conditions must share one fault line. Use a pull-up that preserves adequate noise margin and keep the bus capacitance low enough to meet the required rising-edge timing.

🔧

Relay and Solenoid Interface

The LM393TLX/NOPB can serve as the decision element in a relay or solenoid interface when its open-collector output drives a suitable transistor stage rather than the inductive load directly. The comparator determines whether an analog control voltage has crossed a threshold, while the downstream transistor supplies the required coil current and isolation from the logic supply. A flyback diode is required across the coil, and the comparator's pull-up resistor must be sized for the transistor's base or gate requirements. Slow response characteristics can also provide intentional noise filtering in some control paths.

🚗

Consumer and Automotive-Style Status Monitoring

The LM393TLX/NOPB fits simple status-monitoring functions in consumer equipment and automotive-style control modules when the electrical and environmental requirements are met. Two independent comparator channels can provide dual-limit detection, mode selection, or fault qualification using low-power open-collector outputs. The wide 2 V to 36 V supply range supports varied system rails, while the small DSBGA package can assist compact layouts. For an automotive-grade deployment, confirm the required qualification and temperature grade explicitly; the commercial ordering designation alone does not establish automotive qualification.

おすすめ製品の概要

LM393TL/NOPB Texas Instruments 使用用途: Battery Threshold Monitoring, Power-Supply Overvoltage Detection, Wired-Logic Interface, Consumer and Automotive-Style Status Monitoring LM2903 Related wide-temperature dual comparator 使用用途: Battery Threshold Monitoring, Industrial Sensor Threshold Detection, Power-Supply Overvoltage Detection, Relay and Solenoid Interface, Consumer and Automotive-Style Status Monitoring LM393N/NOPB Texas Instruments 使用用途: Industrial Sensor Threshold Detection, Wired-Logic Interface, Relay and Solenoid Interface
What are the key specifications of LM393TLX/NOPB that engineers should know?
The LM393TLX/NOPB is a dual, general-purpose differential comparator with open-collector outputs, rail-to-rail inputs, and a 2 V to 36 V supply range. According to the Texas Instruments LM393 product information, it contains two independent elements in an 8-DSBGA package. The device is associated with a maximum input offset voltage of 2.0 mV, a typical input bias current of 250 nA, and a typical response time of 700 ns. These characteristics make it relevant to threshold detection, sensing, and wired-logic interface circuits.
Where to download the LM393TLX/NOPB datasheet PDF?
The official LM393TLX/NOPB documentation is available from the Texas Instruments LM393 product page at https://www.ti.com/product/LM393. The ordering-information page for LM393TLX/NOPB is also available through TI at https://www.ti.com/product/LM393-N/part-details/LM393TLX/NOPB. Use the manufacturer's ordering table to confirm the exact 8-DSBGA configuration, electrical limits, package drawing, and ordering codes before releasing a PCB design.
Where can I find the LM393TLX/NOPB pinout?
Use the package drawing and pin configuration in the Texas Instruments LM393 datasheet for the 8-DSBGA ordering option. The manufacturer describes the LM393 in an innovative thin DSBGA package containing 8 bumps at 12 mil pitch. Because a dedicated 8-DSBGA package drawing is not included on the product overview page, use the exact ordering-code documentation rather than applying an SOIC-8 or generic BGA pinout to the PCB.
How does the LM393TLX/NOPB open-collector output work?
The LM393TLX/NOPB output transistor actively sinks current when its comparator condition is met and otherwise leaves the output electrically open. A pull-up resistor is therefore required to establish the high output voltage. According to the Texas Instruments LM393 documentation, the open-collector arrangement can directly interface with CMOS, DTL, ECL, MOS, and TTL logic levels. This makes the output useful for wired-AND buses, but the pull-up value must satisfy both the downstream input current and the desired output rise time.
What supply voltage can LM393TLX/NOPB operate from?
The LM393TLX/NOPB operates from a 2 V to 36 V supply, or from approximately ±1 V to ±18 V when dual supplies are used. The listed supply range is identified in the LM393 technical specifications and ordering information. The actual usable range still depends on input common-mode voltage, output pull-up voltage, load current, temperature, and the individual channel's operating state, so those limits should be checked before selecting the device for a new rail.
Is LM393TLX/NOPB suitable for battery voltage threshold detection?
Yes, the LM393TLX/NOPB is suitable for battery or power-supply threshold detection when the monitored voltages remain within its specified common-mode and supply limits. Its rail-to-rail input characteristic helps cover signals near the supply rails, while the 250 nA typical input bias current minimizes loading of high-impedance dividers. The open-collector output can signal an MCU input through a pull-up, but the system must prevent the comparator input and output nodes from exceeding their absolute maximum ratings during charging or fault conditions.
What can replace LM393TLX/NOPB?
A valid replacement must match the 8-DSBGA footprint, ball assignment, output topology, supply range, input common-mode range, offset, response time, and external pull-up arrangement. The cross-reference results identify the related LM393TL/NOPB ordering configuration, but its suffix denotes a different packaging or order code rather than a distinct engineering alternative. Because the available results do not establish five pin-compatible 8-DSBGA alternatives, do not substitute a generic SOIC-8 LM393 without checking the required DSBGA land pattern.
Can LM2903 replace LM393TLX/NOPB?
The LM2903 is a related dual comparator discussed in Texas Instruments replacement guidance, but it must not be treated as a direct LM393TLX/NOPB drop-in replacement without package and pin verification. The target uses an 8-DSBGA package, while replacement suitability depends on the exact LM2903 ordering suffix, footprint, pin map, temperature grade, and output characteristics. Use the manufacturer's cross-reference search and datasheets to verify every connection before considering a board-level substitution.
LM393TLX/NOPB vs LM393LV - which is better for a low-voltage design?
The LM393LV may be preferable for a low-voltage design because Texas Instruments identifies it as an alternative with a lower voltage range and improved performance in its product comparison. The LM393TLX/NOPB remains suitable for systems needing its 2 V to 36 V supply capability and open-collector interface. The choice depends on the actual rail voltage, required common-mode range, output architecture, package availability, and qualification requirements rather than on offset voltage alone.
When should I choose LM393TLX/NOPB over a modern rail-to-rail comparator?
Choose the LM393TLX/NOPB when an open-collector output, broad supply-voltage range, low input bias current, and two independent comparator channels are more important than push-pull output speed or rail-to-rail output saturation. It is particularly useful for wired logic and simple threshold detection. A modern CMOS comparator may provide faster transitions, lower power consumption, or rail-to-rail output levels, but its input range, output topology, and supply limits may require different biasing or board wiring.
Is LM393TLX/NOPB suitable for industrial monitoring equipment?
The LM393TLX/NOPB can be used in industrial monitoring equipment when its supply, common-mode, temperature, and protection limits match the application. Its 2 V to 36 V supply range and 250 nA typical input bias current support threshold and sensing circuits, while the open-collector output can drive a pull-up or relay-driver stage. Industrial suitability still requires checking the exact temperature grade, surge exposure, isolation requirements, and applicable regulatory standards for the finished equipment.
How should the pull-up resistor be selected for LM393TLX/NOPB?
Select the pull-up resistor using the maximum output sink current, minimum input current of the receiving logic, output rise-time target, and pull-up voltage. A smaller resistance lowers the output rise time but increases sink current when the comparator transistor is on; a larger resistance reduces current but creates a slower transition and more susceptibility to noise. Use the LM393 output-current limits and the downstream family's input-current specifications to choose a value that satisfies both constraints.
How much power does the LM393TLX/NOPB dissipate?
The LM393TLX/NOPB dissipation depends on the supply voltage, quiescent current, output sink current, and how long the open-collector transistor remains on. The exact power dissipation limit and thermal information are not stated on the product overview page, so they must be taken from the manufacturer datasheet for the selected ordering code. For a design estimate, multiply the measured or specified supply current by the supply voltage, then subtract the useful output power when calculating regulator and copper-area demand.
Is LM393TLX/NOPB currently available for new designs?
The Texas Instruments LM393 product page remains the official source for lifecycle and ordering information for the LM393 family, and LM393TLX/NOPB is represented by a dedicated part-details entry. Request the current lifecycle confirmation, lead time, and minimum order quantity through the Request a Quote form on this page. Current distributor landing pages can assist with sourcing review, but the manufacturer's ordering table remains authoritative for package and quality status.
Where to buy LM393TLX/NOPB online and what is the lead time?
Use the Request a Quote form on this page to request LM393TLX/NOPB pricing, current stock status, lead time, and minimum order quantity. The manufacturer identifies LM393TLX/NOPB as a commercial-grade dual comparator in the 8-DSBGA package, but live procurement terms can change with inventory and demand. Provide the target quantity, approved sourcing conditions, and required delivery date so the quote reflects the exact MPN and package.

エンジニアリング参考データ: LM393TLX/NOPB — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose LM393TLX/NOPB when the design needs two independent general-purpose comparator channels, an open-collector output, a 2 V to 36 V supply range, and rail-to-rail input capability. Its 2.0 mV maximum offset specification and 250 nA typical input bias current are useful in threshold-detection circuits, while the approximately 700 ns response suits systems that do not require high-speed edge rates. The open-collector architecture is particularly valuable for wired logic, but it requires external pull-up resistors and careful sink-current sizing. LM393LV may be preferable for a lower-voltage optimized design, while LM2903 should be considered when a related comparator with broader temperature-grade options is needed. Neither is automatically a footprint-compatible replacement for the 8-DSBGA target. Before substitution, verify the package, ball map, common-mode limits, output behavior, temperature grade, and lifecycle requirements against the manufacturer documentation.

代替品との比較

パラメータ この製品
Package 8-DSBGA
Brand Texas Instruments
Comparator Type General-purpose differential comparator
Number of Elements 2
Supply Voltage Range 2 V to 36 V
Input Common-Mode Range Rail-to-rail
Output Type Open-collector
Maximum Input Offset Voltage 2.0 mV
Typical Input Bias Current 250 nA
Typical Response Time 700 ns

主な差別化要因

  • Broad supply-voltage operating range (vs LM393LV)
  • Open-collector wired-logic compatibility (vs Push-pull CMOS comparator alternatives)
  • Low 250 nA typical input bias current (vs LM2903)

設計ノート

Add an external pull-up resistor to every open-collector output that must drive a high logic state. Choose its resistance from the pull-up voltage, required sink current, receiver input current, bus capacitance, and acceptable rise time. The resistor must remain compatible with the LM393 output sink-current limit under all operating conditions. If the output drives a transistor rather than a logic input, recalculate the base or gate current instead of treating the output as a push-pull driver.

Route the two differential input pairs as short, matched paths where practical, and keep them away from switching nodes, relay coils, and high-current return paths. The open-collector pull-up resistor should be close to the comparator output when the trace is electrically long or capacitive. Because this is an 8-DSBGA device, use the manufacturer's land pattern and ball assignment rather than substituting a generic SOIC-8 footprint; package height and ball pitch must also be checked against enclosure clearance.

Do not assume that a comparator with rail-to-rail inputs can safely accept any voltage between the supply rails. Verify the exact common-mode limits, input absolute maximum ratings, supply sequencing conditions, and output pull-up voltage from the manufacturer datasheet. Also avoid using the suffix LM393TL/NOPB as a drop-in substitute for LM393TLX/NOPB without confirming the manufacturer ordering code, because a suffix change may represent a different shipment form rather than an electrically distinct alternative.

For slow threshold signals, place a suitable capacitor at the input only when its charging behavior will not alter the intended switching threshold or response time. The typical 700 ns response can help reject short disturbances, but very slow signals may also increase propagation delay through the complete detection path. If the open-collector output drives a long or highly capacitive line, use a smaller pull-up value within the sink-current limit and evaluate the resulting rise time and EMI behavior.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The commercial-grade LM393 family and ordering information are identified by Texas Instruments. Specific RoHS, REACH, halogen-free, and conflict-minerals declarations for LM393TLX/NOPB are not stated on the product overview page. Automotive qualification is not established by this commercial ordering code.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

lm393tlx nopb LM393TLX/NOPB datasheet LM393TLX/NOPB datasheet pdf LM393TLX/NOPB pinout LM393TLX/NOPB specifications LM393TLX/NOPB equivalent LM393TLX/NOPB replacement LM393TLX/NOPB vs LM393LV Texas Instruments LM393TLX/NOPB LM393TLX/NOPB 8-DSBGA LM393TLX/NOPB open collector LM393TLX/NOPB price LM393TLX/NOPB stock LM393TLX/NOPB application circuit

関連部品&用語

Texas Instruments LM393TLX/NOPB LM393TL/NOPB LM393N/NOPB LM393LV LM2903 dual differential comparator comparator analog integrated circuit semiconductor open-collector output rail-to-rail input input offset voltage input bias current response time wired-AND logic 8-DSBGA DSBGA package ball-grid array surface mount battery threshold monitoring industrial sensor detection power-supply monitoring RoHS REACH
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示