LTC3370MPUH#PBF - 4-Ch 8A Configurable Buck | Analog Devices
部品番号: LTC3370MPUH#PBF ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $8.5 | $8.50 |
| 10 | $7.65 | $76.50 |
| 100 | $6.8 | $680.00 |
| 500 | $6.12 | $3,060.00 |
| 1,000 | $5.5 | $5,500.00 |
LTC3370MPUH#PBF 概要
A multioutput buck converter is a type of DC-DC switching regulator that provides multiple regulated output voltages from a single input supply. It belongs to the broader category of power management ICs, which manage power distribution and conversion in electronic systems. By integrating multiple converters on one chip, it reduces component count, board area, and cost compared to discrete solutions.
Key features include a wide input voltage range of 2.25V to 5.5V, adjustable output voltage down to 0.8V, and a common switching frequency programmable via an external resistor. The device achieves high efficiency through synchronous rectification and offers low total no-load supply current, making it suitable for battery-powered applications. Its flexible configuration allows designers to allocate power stages dynamically to meet varying load requirements.
Technically, the LTC3370 uses a current-mode control architecture with internal compensation, ensuring stable operation across a wide range of output capacitors. The eight power stages can be combined in various parallel configurations to deliver higher current to a single output or distributed across multiple outputs. The pin-programmable C1-C3 pins simplify configuration without external components, reducing design complexity.
Typical applications include portable devices, industrial equipment, and automotive systems where multiple low-voltage rails are needed. For example, it can power an FPGA core, I/O, and auxiliary circuits from a single 5V supply. Its high efficiency and low quiescent current extend battery life in handheld devices.
When designing with this device, ensure proper input and output capacitor selection to maintain stability and minimize ripple. The exposed pad must be soldered to a large copper area for adequate thermal dissipation, especially at high output currents.
ドロップイン代替品: LTC3370MPUH#PBF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: LTC3370MPUH#PBF （同一形状・フットプリント） — 相違点: Maximum Output Current, Package, Operating Temperature Range, Output Voltage Range, Switching Frequency.
クイック比較ツール — 並列比較する代替部品を選択:
LTC3370IUH#PBF
✅ ドロップイン✓ 在庫あり
$5.5 / 個
データシートを見る →LTC3370EUH#PBF
✅ ドロップイン✓ 在庫あり
$7.15 / 個
データシートを見る →TPS65251RHAR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS65254RHAR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
TPS65253RHAR
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
LTC3370MPUH#PBF 最大定格＆電気的特性
| 出力タイプ | Adjustable |
| 出力電圧範囲 | 0.8V to 5.5V |
| 最大出力電流 | 8A (total, configurable up to 4A per channel) |
| 入力電圧範囲 | 2.25V to 5.5V |
| 出力数 | 4 |
| スイッチング周波数 | Programmable via external resistor |
| 同期整流 | Yes |
| 動作温度範囲 | -40°C to 125°C (junction) |
| パッケージ | 32-WFQFN Exposed Pad |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| REACH Status | Compliant |
| Control Architecture | Current Mode |
LTC3370MPUH#PBF ピン構成
| ピン 1 | SW1 — Switch node for buck 1 |
| ピン 2 | VIN1 — Input supply for buck 1 |
| ピン 3 | GND — Ground |
| ピン 4 | SW2 — Switch node for buck 2 |
| ピン 5 | VIN2 — Input supply for buck 2 |
| ピン 6 | GND — Ground |
| ピン 7 | SW3 — Switch node for buck 3 |
| ピン 8 | VIN3 — Input supply for buck 3 |
| ピン 9 | GND — Ground |
| ピン 10 | SW4 — Switch node for buck 4 |
| ピン 11 | VIN4 — Input supply for buck 4 |
| ピン 12 | GND — Ground |
| ピン 13 | C1 — Configuration pin 1 |
| ピン 14 | C2 — Configuration pin 2 |
| ピン 15 | C3 — Configuration pin 3 |
| ピン 16 | RT — Switching frequency programming |
| ピン 17 | RUN — Enable control |
| ピン 18 | VOUT1 — Output voltage sense for buck 1 |
| ピン 19 | VOUT2 — Output voltage sense for buck 2 |
| ピン 20 | VOUT3 — Output voltage sense for buck 3 |
| ピン 21 | VOUT4 — Output voltage sense for buck 4 |
| ピン 22 | FB1 — Feedback for buck 1 |
| ピン 23 | FB2 — Feedback for buck 2 |
| ピン 24 | FB3 — Feedback for buck 3 |
| ピン 25 | FB4 — Feedback for buck 4 |
| ピン 26 | GND — Ground |
| ピン 27 | GND — Ground |
| ピン 28 | GND — Ground |
| ピン 29 | GND — Ground |
| ピン 30 | GND — Ground |
| ピン 31 | GND — Ground |
| ピン 32 | GND — Ground |
主な用途
LTC3370MPUH#PBF の用途: 6 件s: FPGA Power Supply, Portable Devices, Industrial Automation, Automotive Electronics, Networking Equipment, Medical Devices.
FPGA Power Supply
The LTC3370MPUH#PBF provides multiple low-voltage rails (e.g., 1.0V core, 1.8V I/O, 2.5V auxiliary) from a single 5V input. Its configurable power stages allow up to 4A per channel, meeting the dynamic current demands of FPGAs. The high efficiency and low noise help maintain signal integrity in high-speed designs.
おすすめ
Portable Devices
In battery-powered portable devices, the LTC3370MPUH#PBF efficiently converts battery voltage (2.25V-5.5V) to multiple regulated rails for processors, memory, and peripherals. Its low no-load supply current extends standby time, while the small 32-WFQFN package saves board space. The configurable outputs allow optimization for different operating modes.
おすすめ
Industrial Automation
The LTC3370MPUH#PBF is suitable for industrial control systems requiring multiple stable voltage rails from a 5V supply. Its wide temperature range (-40°C to 125°C) ensures reliable operation in harsh environments. The synchronous buck converters provide high efficiency, reducing heat dissipation in sealed enclosures.
おすすめ
Automotive Electronics
For automotive applications, the LTC3370MPUH#PBF can power infotainment systems, ADAS processors, and sensors from a 5V rail. Its high temperature grade supports under-hood environments. However, it is not AEC-Q100 qualified, so for strict automotive compliance, consider alternatives with certification.
おすすめ
Networking Equipment
In networking equipment like routers and switches, the LTC3370MPUH#PBF provides multiple rails for SoCs, PHYs, and memory. Its configurable outputs allow flexible power allocation, and the high efficiency reduces cooling requirements. The small package is ideal for dense PCB layouts.
おすすめ
Medical Devices
The LTC3370MPUH#PBF is used in medical devices requiring multiple low-noise voltage rails, such as patient monitors and diagnostic equipment. Its low output ripple and high efficiency are critical for sensitive analog circuits. The wide temperature range ensures reliable operation in clinical environments.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: LTC3370MPUH#PBF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | LTC3370IUH#PBF | LTC3370EUH#PBF | TPS65251RHAR |
|---|---|---|---|---|
| Package | 32-WFQFN Exposed Pad | 32-WFQFN Exposed Pad | 32-WFQFN Exposed Pad | 32-WFQFN Exposed Pad |
| Brand | Analog Devices | Analog Devices | Analog Devices | Texas Instruments |
| Input Voltage Range | 2.25V to 5.5V | 2.25V to 5.5V | 2.25V to 5.5V | 4.5V to 18V |
| Output Current (Total) | 8A | 8A | 8A | 3A |
| Number of Outputs | 4 | 4 | 4 | 3 |
| Output Voltage Range | 0.8V to 5.5V | 0.8V to 5.5V | 0.8V to 5.5V | 0.8V to 5.5V |
| Switching Frequency | Programmable | Programmable | Programmable | Fixed 500kHz |
| Operating Temperature Range | -40°C to 125°C | -40°C to 85°C | 0°C to 85°C | -40°C to 125°C |
主な差別化要因
- Higher temperature grade (M) for -40°C to 125°C operation （vs LTC3370IUH#PBF)
- Configurable 8A total output with up to 4A per channel （vs TPS65251RHAR)
- Wide input voltage range of 2.25V to 5.5V （vs TPS65251RHAR)
設計ノート
Place input and output capacitors close to the IC pins to minimize parasitic inductance. Use low-ESR ceramic capacitors (e.g., 10uF) for each input and output. The exposed pad must be soldered to a large copper area for thermal dissipation and electrical grounding.
At high output currents, the power dissipation can be significant. Calculate the junction temperature using the package thermal resistance (theta_JA) and ensure it stays below 125°C. Use multiple vias under the exposed pad to conduct heat to the PCB ground plane.
Ensure the C1-C3 pins are set correctly for the desired output configuration. Incorrect settings can lead to improper current sharing. Also, verify the switching frequency programming resistor value to avoid instability or excessive ripple.
コンプライアンス情報
RoHS and REACH compliant per Analog Devices. Not AEC-Q100 qualified.
