Analog Devices

MAX232ECWE+TG104 - Dual RS-232 IC | Analog Devices

部品番号: MAX232ECWE+TG104 ✓ 生産中
4.5 V to 5.5 V Vdss 16-pin SOIC Package
MOQ: 1 |

MAX232ECWE+TG104 概要

Analog Devices MAX232ECWE+TG104 is a dual RS-232 transceiver IC with one transmitter and one receiver, operated from a single 4.5 V to 5.5 V supply in a 16-pin SOIC package. The device provides integrated charge-pump circuitry, eliminating the need for a bipolar positive and negative supply, and includes integrated protection rated at ±15 kV HBM ESD.

An RS-232 transceiver is an interface integrated circuit that converts logic-level signals into RS-232-compatible levels and converts received RS-232 signals back into logic levels. It belongs to the line-driver and line-receiver hierarchy within interface ICs. This device is intended for bidirectional serial communication over cables or other RS-232 links where the host supplies a single positive supply voltage.

The principal features of the MAX232ECWE+TG104 are its dual 2/2 transceiver arrangement, 4.5 V to 5.5 V supply range, integrated charge-pump capability, and integrated ±15 kV human-body-model ESD protection. The 16-pin gull-wing SOIC package supports conventional surface-mount assembly and provides enough pins for the receiver, transmitter, supply, ground, and externally connected charge-pump capacitors.

The MAX232 family uses CMOS-compatible logic on the digital interface side while the integrated charge-pump circuitry creates the bipolar voltage levels required by RS-232. This arrangement simplifies system power design because the circuit does not require separate positive and negative supplies. ESD protection integrated into the interface can improve resistance to electrostatic discharge encountered during handling or connection of external cabling.

Typical uses include industrial control equipment, data-acquisition systems, serial adapters, service-console interfaces, and legacy peripheral connections. In each case, the transmitter converts outgoing logic signals into RS-232 levels, while the receiver translates incoming levels into logic signals understood by the host controller. The commercial temperature grade identifies this ordering code as intended for normal commercial operating conditions.

Designers should place the required external capacitors close to the charge-pump pins and route the RS-232 interface traces away from sensitive digital signals. Ground-return continuity and compliant cable practices remain important because integrated ESD protection does not eliminate the need for good enclosure and grounding practices. Confirm the complete pin assignment, absolute maximum ratings, and capacitor values against the manufacturer datasheet before layout release.

This product page combines the device identification, verified technical characteristics, sourcing guidance, and application-focused design information. It also identifies genuinely comparable package and ordering variants while making clear where a complete pin-level alternative cannot be established without additional manufacturer cross-reference information.

ドロップイン代替品: MAX232ECWE+TG104 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX232ECWE+TG104 (同一形状・フットプリント) — 相違点: Product Type, Interface Standard, Package, Supply Voltage Range, ESD Protection.

Analog Devices
Product Type: RS-232 line driver/receiver transceiver
Interface Standard: RS-232; EIA/TIA-232E and V.28/V.24 family application
Package: 16-pin wide SOIC
比較対象 MAX232ECWE+TG104 →
Analog Devices
Interface Standard: EIA/TIA-232E and CCITT V.28
Package: 16-pin narrow SOIC
Supply Voltage Range: 4.5V to 5.5V
比較対象 MAX232ECWE+TG104 →
Maxim Integrated
Product Type: Dual RS-232 line driver and receiver transceiver
Interface Standard: EIA/TIA-232E
比較対象 MAX232ECWE+TG104 →

MAX232EWE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 SOIC-16
Dual RS-232 transceiver · RS-232 · 4.5 V to 5.5 V · 5 V · 2 channels · 2 channels · 120 kbps · CMOS

価格はお問い合わせください

データシートを見る →

MAX232CWE+

✅ ドロップイン ⚠️ 仕様未検証
Analog Devices
📦 SOIC-16
RS-232 line driver/receiver transceiver · 4.5 V to 5.5 V · 2 · 2 · RS-232; EIA/TIA-232E and V.28/V.24 family application · Dual RS-232 transmitter · Dual RS-232 receiver · CMOS/TTL-compatible digital interface

価格はお問い合わせください

データシートを見る →

MAX232ESE+

✅ ドロップイン ⚠️ 仕様未検証
Maxim Integrated
📦 SOIC-16
Dual RS-232 line driver and receiver transceiver · 2 channels · 2 channels · 4.5 V to 5.5 V · 120 kbps · EIA/TIA-232E · CCITT V.28 · V.24

価格はお問い合わせください

データシートを見る →

MAX232ECWE+TG104 仕様

Product Type RS-232 transceiver
Transmitter Count 1 transmitter
Receiver Count 1 receiver
Transceiver Configuration 2/2 dual RS-232 transceiver
Supply Voltage Range 4.5 V to 5.5 V
ESD Protection ±15 kV HBM
Charge-Pump Circuitry Integrated
External Bipolar Supply Not required
パッケージ 16-pin SOIC
Terminal Count 16 terminals
Terminal Form Gull wing
Package Code SOP
Package Shape Rectangular
Temperature Grade Commercial
実装タイプ Surface mount
Logic Interface CMOS-compatible logic

MAX232ECWE+TG104 rectangular ピン配置ガイド

MAX232ECWE+TG104 (rectangular パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX232ECWE+TG104 の rectangular パッケージピン配置図

詳細なピン配置データはありません: MAX232ECWE+TG104.

詳細は データシート をご参照ください。

主な用途

MAX232ECWE+TG104 の用途: 6 件s: Industrial Control Console Interface, Data Acquisition Equipment, Serial Service Adapter, Legacy Peripheral Connectivity, Point-of-Sale Terminal, Instrumentation Communication Port.

🏭

Industrial Control Console Interface

The MAX232ECWE+TG104 fits an industrial controller that must communicate with a legacy RS-232 console using only a 5 V power rail. Its 4.5 V to 5.5 V operating range and integrated charge-pump circuitry eliminate the need for a separate bipolar supply, reducing supply-tree complexity. The 16-pin SOIC package is suitable for conventional surface-mount assembly, while ±15 kV HBM ESD protection adds interface ruggedness where a service cable may be connected. In implementation, the transmitter accepts host-side logic and produces RS-232 levels, while the receiver converts the returning signal. Place the required external capacitors near their associated pins and maintain a continuous signal-ground path with the connected equipment.

📊

Data Acquisition Equipment

The MAX232ECWE+TG104 is suitable for linking a data-acquisition instrument to a host computer through an RS-232 port. The single 4.5 V to 5.5 V supply range simplifies instrumentation power distribution, while the integrated charge pump generates the bipolar signal levels required by RS-232 without an external negative rail. Its 2/2 transceiver arrangement supports one outbound data path and one inbound data path, making it appropriate for command and measurement traffic. The ±15 kV HBM ESD rating provides useful robustness for laboratory and industrial cabling, although correct grounding remains essential. Follow the manufacturer typical-application diagram for capacitor placement, and verify logic levels and timing in the host interface circuit.

🔧

Serial Service Adapter

The MAX232ECWE+TG104 can provide the electrical interface in a compact serial service adapter connected to a controller board. Because the device operates from 4.5 V to 5.5 V and includes a charge pump, an adapter can be powered from a conventional positive rail instead of requiring a bipolar supply. The 16-pin SOIC package also supports dense surface-mount layouts. Integrated ±15 kV HBM protection is particularly relevant when the adapter handles an exposed service connector. Designers should still include overcurrent protection and grounding appropriate to the product enclosure, verify the connector's signal assignments, and route transceiver traces away from switching nodes and sensitive analog circuitry to minimize coupling.

🖥️

Legacy Peripheral Connectivity

The MAX232ECWE+TG104 allows a modern controller to communicate with equipment that exposes only an RS-232 connector. Its 2/2 transceiver configuration handles one direction for transmitting commands and the other for receiving responses, while the 4.5 V to 5.5 V supply range aligns with common embedded power systems. Integrated charge-pump circuitry reduces the external power-supply burden, and ±15 kV HBM ESD protection improves robustness at the cable interface. Before layout release, confirm that the legacy device uses compatible logic levels and that the RS-232 ground is connected. Keep the interface connector and protection network away from high-current paths, and use the manufacturer pin table to confirm every net.

🏬

Point-of-Sale Terminal

The MAX232ECWE+TG104 is applicable to point-of-sale equipment that communicates with a peripheral through a wired RS-232 link. The single-supply 4.5 V to 5.5 V operation allows the interface to share a common positive rail in compact terminal electronics, and the integrated charge pump avoids a separate negative-voltage generator. Its 2/2 arrangement supports command transmission and status reception, while ±15 kV HBM ESD protection helps protect the interface from electrostatic discharge encountered during installation or servicing. The 16-pin gull-wing SOIC is compatible with standard surface-mount production methods. Maintain short return paths between logic and connector grounds, and validate the peripheral's voltage levels and handshake signals before releasing the design.

📟

Instrumentation Communication Port

The MAX232ECWE+TG104 is well suited to instrumentation that must report measurements and accept configuration commands through RS-232. Its 4.5 V to 5.5 V supply range supports standard 5 V instrumentation architectures, while integrated charge-pump circuitry removes the need for external positive and negative rail generation. The device provides one transmitter and one receiver for bidirectional control and data traffic, and its ±15 kV HBM protection is useful in bench and field environments. Use the manufacturer recommended capacitor values and place them close to the charge-pump network. Also keep the RS-232 return connected, provide suitable connector protection, and separate the interface routing from high-noise switching stages to preserve signal integrity.

What is the MAX232ECWE+TG104?
The MAX232ECWE+TG104 is a dual RS-232 transceiver manufactured by Analog Devices, combining one RS-232 transmitter and one receiver in a 16-pin SOIC package. According to the manufacturer datasheet, it operates from a 4.5 V to 5.5 V supply and uses integrated charge-pump circuitry to eliminate the need for a separate bipolar supply. The device also includes ±15 kV HBM ESD protection.
What is the operating voltage of MAX232ECWE+TG104?
The MAX232ECWE+TG104 operates from a single supply voltage between 4.5 V and 5.5 V. According to the manufacturer datasheet, its integrated charge-pump circuitry develops the bipolar signal levels required for RS-232 communication. This allows the interface to operate from a conventional positive supply rather than requiring separate positive and negative rail voltages.
Where can I download the MAX232ECWE+TG104 datasheet PDF?
The MAX232ECWE+TG104 datasheet can be accessed through the Analog Devices documentation link or a hosted copy of the manufacturer datasheet on this page. The datasheet identifies the device as a 4.5 V to 5.5 V, ±15 kV HBM ESD-protected RS-232 transceiver with integrated charge-pump circuitry. Use the manufacturer document for the authoritative pin descriptions, capacitor values, electrical characteristics, and recommended operating conditions.
Where can I find the MAX232ECWE+TG104 pinout?
The MAX232ECWE+TG104 pinout is documented in the manufacturer datasheet, which contains the 16-pin SOIC pin-description table and typical connection diagrams. The verified device information confirms a 16-terminal gull-wing SOIC package, but it does not reproduce every individual pin name. Therefore, use the datasheet pin-description table when assigning PCB nets and placing the required external capacitors.
Does MAX232ECWE+TG104 need external positive and negative supplies?
No. The MAX232ECWE+TG104 does not require external positive and negative supplies because it contains integrated charge-pump circuitry. According to the manufacturer datasheet, the device operates from a single 4.5 V to 5.5 V supply and generates the bipolar voltage levels needed by the RS-232 interface. External charge-pump capacitors are still required; their values and connection details are specified in the datasheet.
What ESD protection does MAX232ECWE+TG104 provide?
The MAX232ECWE+TG104 provides integrated protection rated at ±15 kV using the human-body-model ESD test. According to the manufacturer datasheet, this protection is included on the RS-232 interface. It improves robustness during handling and cable connection, but system designers must still provide correct grounding, compliant cabling, and appropriate enclosure and connector practices.
Where can I buy MAX232ECWE+TG104 online?
The MAX232ECWE+TG104 can be requested through the Request a Quote form on this page, where the exact ordering code and required quantity can be reviewed before an order is placed. The form is the appropriate route for current commercial availability, lot-related packaging questions, and lead-time confirmation. Pricing is maintained through the quote workflow rather than embedded in static product content.
What is the price of MAX232ECWE+TG104?
Current pricing for MAX232ECWE+TG104 should be obtained through the Request a Quote form on this page because commercial terms can vary with quantity, packaging, and current channel conditions. The form accepts the exact MAX232ECWE+TG104 ordering code, allowing the quote to be matched to the correct 16-pin SOIC device rather than a related MAX232 package or ordering variant.
What is the lead time for MAX232ECWE+TG104?
The current lead time for MAX232ECWE+TG104 should be confirmed through the Request a Quote form on this page. Request the needed quantity, production schedule, and packaging requirements so the manufacturer or authorized channel can confirm an accurate schedule. This avoids relying on a static lead-time statement that may not reflect the current order quantity or market conditions.
Is MAX232ECWE+TG104 in stock?
Current stock status for MAX232ECWE+TG104 should be confirmed through the Request a Quote form on this page. Enter the exact ordering code and required quantity to obtain a current availability response. The TG104 suffix identifies a specific ordering configuration, so stock inquiries should be tied to the complete MAX232ECWE+TG104 MPN rather than a generic MAX232 family listing.
What is the difference between MAX232ECWE+TG104 and MAX232ECWE+?
MAX232ECWE+TG104 and MAX232ECWE+ identify ordering configurations of the same MAX232ECWE device family, but TG104 is an additional packaging or shipment code. The electrical identity remains a 16-pin SOIC RS-232 transceiver with a 4.5 V to 5.5 V supply, integrated charge pump, and ±15 kV HBM ESD protection. Verify the mechanical form, reel configuration, and order documentation before treating them as interchangeable.
MAX232ECWE+TG104 vs MAX232EWE+ - which is better?
MAX232ECWE+TG104 is preferable when the required shipment configuration includes the TG104 code, while MAX232EWE+ is the base ordering designation without that suffix. Both identify a 16-pin SOIC RS-232 transceiver in the same MAX232ECWE family. Selection should therefore be based on the exact manufacturer ordering code, packaging documentation, and production requirements rather than on an assumed electrical difference.
When should I choose MAX232ECWE+TG104 over MAX232CWE+?
Choose MAX232ECWE+TG104 when the design and purchasing documentation specifically call for the E-series ordering code and TG104 shipment configuration. Choose MAX232CWE+ only after confirming that its temperature grade and ordering details satisfy the equipment requirements. Both devices use the 16-pin SOIC format, but the manufacturer ordering codes must be reviewed against the required environmental and commercial conditions.
Is MAX232ECWE+TG104 suitable for industrial serial equipment?
The MAX232ECWE+TG104 is suitable for RS-232 interface sections of industrial equipment when the specified commercial temperature grade and electrical limits match the operating environment. Its 4.5 V to 5.5 V supply range, integrated charge pump, and ±15 kV HBM ESD protection simplify single-supply implementation. For harsher temperature requirements, verify the exact temperature range against the manufacturer datasheet.
What can replace MAX232ECWE+TG104?
The closest traceable replacement is another ordering configuration in the MAX232ECWE family when its package, temperature grade, and shipment code meet the design requirements. MAX232EWE+ and MAX232CWE+ are related 16-pin SOIC variants, but each must be checked against the manufacturer ordering documentation. The verified cross-reference information does not establish five complete pin-to-pin alternatives with independently confirmed electrical equivalence.
Is MAX232ECWE+TG104 the same as a generic RS-232 transceiver?
No. The MAX232ECWE+TG104 is a specific Analog Devices integrated circuit with defined logic-side behavior, a 4.5 V to 5.5 V supply range, integrated charge-pump circuitry, ±15 kV HBM ESD protection, and a defined 16-pin SOIC pinout. A generic RS-232 transceiver may provide similar communication functions, but equivalence requires checking the pin assignment, voltage levels, timing, protection, and temperature specifications rather than the interface name alone.
What are the key specifications of MAX232ECWE+TG104 that engineers should know?
The key MAX232ECWE+TG104 specifications are its 2/2 dual RS-232 transceiver configuration, 4.5 V to 5.5 V single-supply operation, integrated charge-pump circuitry, ±15 kV HBM ESD protection, commercial temperature grade, and 16-pin gull-wing SOIC package. According to the manufacturer datasheet, these features eliminate the need for a separate bipolar supply while supporting conventional surface-mount RS-232 interface implementation.

エンジニアリング参考データ: MAX232ECWE+TG104 — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MAX232ECWE+TG104 when the controlled bill of materials calls for the specific TG104 shipment configuration and the product needs a 16-pin SOIC RS-232 interface operating from a 4.5 V to 5.5 V supply. Choose MAX232EWE+ when its base ordering and packaging documentation are explicitly approved; its electrical family is closely related, but the shipment code differs. Consider MAX232CWE+ only after confirming the required temperature grade, ESD rating, lifecycle status, and electrical limits. MAX232ESE+ is a related ordering option in the E-series family and should be selected when its exact suffix and qualification match the assembly plan. For every candidate, verify pin compatibility, capacitor values, logic levels, and manufacturer ordering documentation before approving a drop-in substitution.

代替品との比較

パラメータ この製品 MAX232EWE+ MAX232CWE+ MAX232ESE+
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package SOIC-16 SOIC-16 SOIC-16 SOIC-16
Transceiver Configuration 2/2 dual RS-232 transceiver 2/2 dual RS-232 transceiver 2/2 dual RS-232 transceiver 2/2 dual RS-232 transceiver
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V 4.5 V to 5.5 V
Charge-Pump Circuitry Integrated Integrated Integrated Integrated
External Bipolar Supply Not required Not required Not required Not required
Ordering Suffix TG104 shipment code No TG104 shipment code No TG104 shipment code No TG104 shipment code
Mounting Type Surface mount Surface mount Surface mount Surface mount

主な差別化要因

  • Exact TG104 ordering configuration (vs MAX232EWE+)
  • Single 5 V supply operation with integrated charge pump (vs MAX232CWE+)
  • Integrated high-level ESD protection (vs MAX232ESE+)

設計ノート

Place the external charge-pump capacitors close to the corresponding MAX232ECWE+TG104 pins and use the shortest practical ground return permitted by the manufacturer layout. Keep the RS-232-side connector and interface traces away from switching-regulator nodes, clock lines, and sensitive analog inputs. A compact placement reduces parasitic distortion, while maintaining separation prevents charger-pump and switching energy from coupling into the communication path.

Do not substitute a MAX232 ordering code solely because the device family name and package appear similar. The TG104 shipment suffix, temperature grade, ESD rating, lead-free status, and reel configuration must be checked against the production bill of materials. MAX232CWE+ may not provide the same temperature qualification as the E-series ordering code, and the manufacturer documentation should be used to confirm the final assembled part.

Route the transceiver and connector side of the circuit as an interface zone separated from power-conversion and processor circuitry. Provide a direct, continuous ground connection between the logic ground and the RS-232 connector reference when the linked equipment permits it. Avoid long shared paths that carry unrelated return current, because such routing can degrade signal integrity and make ESD events less effectively shunted.

The integrated charge pump eliminates an external bipolar supply, but its switching energy can still couple into nearby circuitry. Follow the manufacturer typical-application layout, minimize loop area around the charge-pump network, and maintain solid ground-plane continuity. If the surrounding system contains sensitive analog or high-speed digital nodes, add filtering and separation according to the system signal-integrity requirements rather than relying only on the IC's internal ESD protection.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The product information identifies a commercial-grade RS-232 interface IC but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable to this general-purpose commercial interface IC.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX232ECWE+TG104 datasheet MAX232ECWE+TG104 pinout MAX232ECWE+TG104 specifications MAX232ECWE+TG104 equivalent MAX232ECWE+TG104 replacement MAX232ECWE+TG104 cross reference MAX232ECWE+TG104 price MAX232ECWE+TG104 stock Analog Devices MAX232ECWE+TG104 MAX232ECWE+TG104 SOIC-16 footprint MAX232ECWE+TG104 application circuit MAX232ECWE+TG104 vs MAX232EWE+

関連部品&用語

Analog Devices MAX232ECWE+TG104 MAX232EWE+ MAX232CWE+ MAX232ESE+ MAX232 RS-232 RS-232 transceiver line driver line receiver interface IC CMOS charge-pump circuitry single-supply operation ESD protection HBM 4.5 V to 5.5 V 15 kV ESD commercial temperature grade SOIC-16 gull-wing package surface mount industrial control data acquisition
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示