MAX3221EEUE+T - 250kbps RS-232 Transceiver | Analog Devices
MPN: MAX3221EEUE+T ✓ AktifMAX3221EEUE+T Genel Bakış
An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. It belongs to the interface IC hierarchy alongside UART transceivers, line drivers, and level shifters. The MAX3221EEUE+T is designed for equipment that requires one bidirectional RS-232 connection, such as configuration ports, service interfaces, point-of-sale terminals, and industrial control systems.
Key operating characteristics include a 3.0 V to 5.5 V supply range, full-duplex operation, and data rates up to 250 kbps. Its enhanced ESD protection helps the interface withstand electrostatic discharge on exposed RS-232 connections. AutoShutdown reduces the supply current to approximately 1 µA when no valid receiver signal is detected, while automatic wake-up returns the device to an active state when a valid signal appears.
The MAX3221E/MAX3223E/MAX3243E family supports EIA/TIA-232 and V.28/V.24 communication interfaces. The MAX3221EEUE+T combines one driver and one receiver in a compact 16-pin TSSOP, making it suitable for space-constrained designs that require a single RS-232 port. Its 250 kbps capability supports faster service and data links than conventional low-speed RS-232 implementations.
Typical applications include industrial controller service ports, point-of-sale and retail equipment, test systems, security consoles, and embedded control boards. The device is particularly useful when the system must operate from a 3.3 V supply while communicating with a legacy RS-232 peripheral or computer port.
PCB design should keep the RS-232 connector and protection network close to the transceiver while maintaining separation from sensitive analog or high-speed digital traces. Follow the manufacturer datasheet for external charge-pump capacitor values, receiver and transmitter connection details, and the complete 16-pin assignment before finalizing the layout.
This page combines the exact ordering information, RS-232 operating characteristics, package details, sourcing options, and application guidance needed to evaluate the MAX3221EEUE+T for a new interface design.
Drop-in alternatifler için MAX3221EEUE+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller MAX3221EEUE+T (aynı form faktörü ve ayağa oturma) — farklı olan Supply Voltage Range, Package, Maximum Data Rate, AutoShutdown Supply Current, ESD Protection.
MAX3221ECUE+T
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →MAX3221EEUE+T Özellikler
| Transceiver Type | 1/1 full-duplex RS-232 transceiver |
| Number of Drivers | 1 driver |
| Number of Receivers | 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| ESD Protection | ±15 kV IEC ESD protection |
| AutoShutdown Supply Current | Approximately 1 µA |
| Power Management | Automatic shutdown and automatic wake-up |
| Communication Standard | EIA/TIA-232 and V.28/V.24 |
| Paket | 16-pin TSSOP |
| Montaj Türü | Surface mount |
MAX3221EEUE+T 16-pin tssop Pin Yapısı Kılavuzu
MAX3221EEUE+T (16-pin tssop paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.
Ayrıntılı pin çıkış verisi mevcut değil: MAX3221EEUE+T.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
MAX3221EEUE+T için uygundur 6 uygulamas: Industrial Controller Service Port, Point-of-Sale Terminal Interface, Embedded Security Console, Test and Measurement Equipment, Retail and Payment Peripheral, Legacy Computer Serial Adapter.
Industrial Controller Service Port
The MAX3221EEUE+T is appropriate for a single RS-232 configuration port on an industrial controller because it combines one transmitter, one receiver, and operation from 3.0 V to 5.5 V. A 3.3 V control system can use the interface without a separate 5 V supply. Its 250 kbps maximum data rate supports faster service commands than a basic low-speed serial implementation, while the 16-pin TSSOP keeps the interface compact. The automatic shutdown and wake-up functions reduce consumption when no valid receiver signal is present, making the device suitable for controllers that remain connected to legacy equipment during much of their operating cycle.
Önerilen
Point-of-Sale Terminal Interface
MAX3221EEUE+T can connect a point-of-sale terminal or peripheral that retains an RS-232 service interface. The single full-duplex channel supports simultaneous command transmission and response reception, while the 250 kbps rating accommodates rapid transaction and configuration exchanges. Because the device operates from 3.0 V to 5.5 V, it can sit directly beside modern 3.3 V logic. Automatic shutdown helps limit power use when the peripheral cable is disconnected, and the compact 16-pin TSSOP preserves board area. The ±15 kV IEC ESD rating adds useful protection for a connector exposed to user-accessible equipment.
Önerilen
Embedded Security Console
The MAX3221EEUE+T fits a security console or access-control unit that needs one wired RS-232 link for diagnostics or legacy peripheral integration. Its 1/1 full-duplex arrangement avoids allocating unused drivers and receivers, while the 16-pin TSSOP simplifies routing in compact control hardware. Operation from 3.0 V to 5.5 V supports both 3.3 V and 5 V system rails, and the 250 kbps capability is useful for transferring configuration blocks efficiently. When the attached device stops communicating, automatic shutdown reduces the transceiver's supply current to approximately 1 µA until a valid signal returns.
Önerilen
Test and Measurement Equipment
MAX3221EEUE+T is suitable for a compact test instrument that communicates with older RS-232-controlled equipment through one full-duplex port. The 250 kbps data-rate capability supports faster command and measurement-data transfers than low-speed serial links. The interface can operate directly from a 3.3 V instrument rail, reducing the need for an additional level-shifting supply domain. Automatic wake-up permits operation after the external equipment reconnects, while automatic shutdown controls consumption during idle periods. Its 16-pin TSSOP package is useful when the RS-232 function shares a crowded front-panel or motherboard layout.
Önerilen
Retail and Payment Peripheral
MAX3221EEUE+T supports a compact legacy link between a retail payment peripheral and a host controller. The one-transmitter, one-receiver arrangement is aligned with a point-to-point RS-232 connection and avoids unnecessary channel overhead. Operation from 3.0 V to 5.5 V accommodates embedded systems using either 3.3 V or 5 V logic, while the enhanced ±15 kV IEC ESD protection is valuable when the cable or connector can be touched during installation. The 250 kbps limit comfortably supports typical command traffic, and the 16-pin TSSOP leaves more PCB area for the peripheral's main digital functions.
Önerilen
Legacy Computer Serial Adapter
MAX3221EEUE+T can provide the physical RS-232 layer for a compact adapter that connects modern electronics to a legacy computer or service port. Its single bidirectional channel matches the one-port use case, and the 250 kbps capability allows substantially faster transfers than the older low-speed RS-232 implementations commonly found on legacy equipment. The broad 3.0 V to 5.5 V operating range supports modern USB-bridge and embedded-controller designs powered from either 3.3 V or 5 V. Automatic shutdown reduces idle consumption, while the small 16-pin TSSOP makes the interface practical for add-on boards with limited routing space.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: MAX3221EEUE+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | MAX3221ECUE+T |
|---|---|---|
| Package | 16-pin TSSOP | 16-pin TSSOP |
| Brand | Analog Devices | Analog Devices |
| Transceiver Configuration | 1 transmitter and 1 receiver | 1 transmitter and 1 receiver |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV IEC ESD protection | ±15 kV IEC ESD protection |
| Shutdown Supply Current | Approximately 1 µA | Approximately 1 µA |
| Power Management | Automatic shutdown and automatic wake-up | Automatic shutdown and automatic wake-up |
| Communication Interface | EIA/TIA-232 and V.28/V.24 | EIA/TIA-232 and V.28/V.24 |
| Ordering Suffix | MAX3221EEUE+T | MAX3221ECUE+T |
Ana Farklılayıcılar
- Compact single-channel RS-232 interface (karşılaştırma:MAX3221ECUE+T)
- Automatic power management (karşılaştırma:MAX3221ECUE+T)
- High-speed single-port operation (karşılaştırma:MAX3221ECUE+T)
Tasarım Notları
Place the MAX3221EEUE+T and its charge-pump capacitors close to the RS-232 connector and device pins. Keep connector-side traces short, provide the external capacitors specified by the manufacturer datasheet, and route the protected RS-232 node away from clocks, ADC inputs, and sensitive analog signals. Maintain clearances appropriate to the connector's voltage and environmental requirements.
Design the 3.0 V to 5.5 V supply path to remain within the operating range during startup, fault conditions, and cable transitions. Account for the interface's active-state current and charge-pump demand when sizing the local supply and bypass capacitors. Automatic shutdown reduces consumption to approximately 1 µA when no valid receiver signal is detected, but the normal operating supply must still support active transmission.
Follow the manufacturer layout for the on-board charge-pump network and avoid placing unrelated traces between the IC and its capacitors. Use a solid ground reference and minimize loop area around the transmitter and receiver paths. Do not rely solely on the IC's ±15 kV IEC ESD rating as a substitute for a properly engineered connector-side protection and chassis-grounding strategy.
Confirm that the complete ordering suffix, temperature grade, package body, and lead dimensions match the PCB before releasing a design. MAX3221EEUE+T is a 16-pin TSSOP, while related MAX3221E ordering codes can use different package bodies. A nominal 16-pin count alone does not establish land-pattern compatibility, so compare the manufacturer package drawing and pin-description table.
Uyumluluk Bilgisi
The interface is not presented as an automotive-qualified device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or current compliance documentation.