Analog Devices

MAX3232EEAE+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices

部品番号: MAX3232EEAE+TG1Z ✓ 生産中
3.0 V to 5.5 V Vdss Down to 10 nA Id 16-pin SSOP Package
MOQ: 1 |

MAX3232EEAE+TG1Z 概要

The Analog Devices MAX3232EEAE+TG1Z is a 3.0 V to 5.5 V, 2-driver/2-receiver, full-duplex RS-232 transceiver capable of operation up to 1 Mbps in a 16-pin SSOP package. The device provides true RS-232 levels, ±15 kV ESD protection, and low-power operation with shutdown supply current down to 10 nA. The MAX3232 family uses on-chip charge pumps to generate the positive and negative voltages required by RS-232 drivers without requiring a separate DC supply.

A transceiver is an interface integrated circuit that combines digital line-driver and receiver functions with the voltage translation required to connect TTL or CMOS logic to an RS-232 port. In the broader semiconductor hierarchy, the MAX3232 is an interface transceiver, a member of the RS-232 interface IC family, and a multi-channel communications device. Its two transmitters convert logic-high and logic-low signals into RS-232 bipolar levels, while its two receivers convert those bipolar levels back into compatible logic levels.

The headline operating features are a 3.0 V to 5.5 V supply range, data rates up to 1 Mbps, and ±15 kV ESD protection. The 2/2 driver-receiver arrangement supports two communications channels in each direction. Low-power shutdown capability is especially useful in battery-operated or intermittently connected equipment because the device can reduce supply current to levels down to 10 nA when the interface is not required.

The MAX3232 family uses integrated charge-pump circuitry to produce the RS-232 voltage levels required by the drivers. Its receiver architecture provides a true RS-232 input threshold and is intended for noisy industrial environments where signal levels can exceed conventional logic limits. The manufacturer also identifies the MAX3232E as pin, package, and functionally compatible with industry-standard MAX232 devices, enabling careful PCB reuse when all operating conditions and enable-control requirements are checked.

Typical applications include industrial serial consoles, data-acquisition equipment, instrumentation, point-of-sale terminals, and embedded systems that communicate through an RS-232 port. Because the interface operates from 3.0 V to 5.5 V, it is appropriate for modern mixed-signal systems in which the host controller may use a 3.3 V supply. Cable length and data rate must be considered together because RS-232 is a point-to-point, unbalanced interface intended primarily for shorter-distance communication.

The primary design consideration is ensuring that every connector, cable, and logic interface matches the bipolar RS-232 electrical specification. Keep the transceiver close to the connector, provide the required charge-pump capacitors using the manufacturer's recommended values and layout, and reserve adequate board space for external protection if the port will be exposed to severe transients. The SSOP package also requires careful assembly planning because its lead pitch is narrower than that of a conventional SOIC package.

This product page combines manufacturer specifications, package and interface details, replacement guidance, comparison parameters, and practical circuit-layout guidance. It is intended to help engineers determine whether the MAX3232EEAE+TG1Z fits an RS-232 design and how to evaluate compatible replacements before changing a released PCB.

ドロップイン代替品: MAX3232EEAE+TG1Z — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3232EEAE+TG1Z (同一形状・フットプリント) — 相違点: Package, Supply Voltage Range.

Texas Instruments
Package: 16-SSOP (DB, 0.209 in / 5.30 mm width)
Supply Voltage Range: 3 V to 5.5 V
比較対象 MAX3232EEAE+TG1Z →

MAX3232ECDB

✅ ドロップイン
Texas Instruments
📦 16-pin SSOP
RS-232 · Transceiver · 2 · 2 · 3 V to 5.5 V · 250 kbps (minimum) · ±15 kV (HBM) · ±15 kV contact discharge / ±15 kV air-gap discharge

価格はお問い合わせください

データシートを見る →

MAX3222CAP+TG1Z

✅ ドロップイン
📦 16-pin SSOP
Same 16-pin SSOP RS-232 family format, but the MAX3222C has fewer driver and receiver channels than the 2/2 MAX3232, requiring channel-by-channel pin verification

📋 参考代替品(カタログ未掲載)

MAX3237EAI+

✅ ドロップイン
📦 16-pin SSOP
Same 16-pin SSOP RS-232 interface format, but the MAX3237 has a different multi-channel count, so two unused functions replace the MAX3232's 2/2 organization

📋 参考代替品(カタログ未掲載)

MAX3232EEAE+TG1Z 仕様

Product Type RS-232 transceiver
Driver Count 2
Receiver Count 2
Operating Modes Full duplex
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 1 Mbps
ESD Protection ±15 kV
Shutdown Supply Current Down to 10 nA
Interface Standard True RS-232
パッケージ 16-pin SSOP
実装タイプ Surface mount
Supply Type Single supply

MAX3232EEAE+TG1Z 16-pin ssop ピン配置ガイド

MAX3232EEAE+TG1Z (16-pin ssop パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3232EEAE+TG1Z の 16-pin ssop パッケージピン配置図

詳細なピン配置データはありません: MAX3232EEAE+TG1Z.

詳細は データシート をご参照ください。

主な用途

MAX3232EEAE+TG1Z の用途: 6 件s: Industrial Serial Console, Data-Acquisition Equipment, Point-of-Sale Terminal, Embedded Test and Measurement Instrument, Battery-Powered Field Controller, RS-232 Port Expansion.

🏭

Industrial Serial Console

The MAX3232EEAE+TG1Z is appropriate for a compact industrial console because it combines two RS-232 drivers, two receivers, and a 3.0 V to 5.5 V supply range in one 16-pin SSOP package. Its true RS-232 levels allow a controller operating at 3.3 V or 5 V to communicate with service equipment without translating voltages in external logic. The documented data rate reaches 1 Mbps, while ±15 kV ESD protection improves robustness at a connector that may be touched during maintenance. Place the device near the serial connector, use the specified charge-pump capacitors, and route the interface away from switching nodes to reduce noise pickup.

📊

Data-Acquisition Equipment

A data-acquisition unit can use the MAX3232EEAE+TG1Z to add two full-duplex RS-232 channels to an embedded controller. The 2/2 organization supports command traffic on one channel and measurement or status data on another, while the single 3.0 V to 5.5 V supply simplifies connection to mixed 3.3 V and 5 V hardware. Its low-power shutdown capability, with current down to 10 nA, is useful when the acquisition system operates intermittently. The 1 Mbps capability provides headroom for firmware updates and diagnostic traffic, although cable length and application data rate must remain within RS-232 channel constraints.

🖥️

Point-of-Sale Terminal

The MAX3232EEAE+TG1Z suits point-of-sale equipment that must retain an RS-232 connection for a printer, scale, reader, or service interface. Its 3.3 V capability allows direct pairing with modern application processors, and the 16-pin SSOP package limits board area compared with a larger SOIC implementation. Two channels can separate transaction traffic from diagnostics or peripheral control. The integrated ±15 kV ESD protection adds useful connector-side ruggedness, although a production design should still assess whether additional surge, ground-loop, or cable-protection components are required for its installation environment.

🔧

Embedded Test and Measurement Instrument

The MAX3232EEAE+TG1Z can connect an embedded measurement controller to a host computer over RS-232 when legacy instrumentation uses that interface. Its full-duplex 2/2 arrangement supports simultaneous command and response traffic, while the 1 Mbps maximum rate accommodates short bursts of configuration and logging data. The device's 3.0 V to 5.5 V operating range supports both legacy 5 V and modern 3.3 V control platforms. Keep the transceiver near the connector, provide a stable return path, and account for ground-potential differences between connected equipment when defining the interface and cable arrangement.

⚡

Battery-Powered Field Controller

A battery-powered field controller can benefit from the MAX3232EEAE+TG1Z when an RS-232 port is required only intermittently. The device operates from 3.0 V to 5.5 V, which simplifies integration with common low-energy embedded rails, and its shutdown current can fall to 10 nA to reduce standby consumption. Two channels can serve a local accessory and a diagnostic port when both are needed. A complete power budget should separate active transceiver consumption from the 10 nA shutdown figure and include the external charge-pump capacitors, pull networks, external protection devices, and the current consumed by attached accessories.

🌐

RS-232 Port Expansion

The MAX3232EEAE+TG1Z is useful when a base controller needs an additional full-duplex RS-232 port rather than a redesign of its existing communications interface. Two drivers and two receivers allow two logical channels within one device, and the 1 Mbps capability exceeds the throughput of many legacy serial-control protocols. Its 16-pin SSOP package supports compact expansion boards, while the 3.0 V to 5.5 V range permits use with a common 3.3 V processor rail. Verify available I/O pins, port interrupt requirements, and connector isolation before adding the device because channel multiplexing can affect firmware scheduling and driver support.

おすすめ製品の概要

MAX3232EEAE+ Analog Devices 使用用途: Industrial Serial Console, Point-of-Sale Terminal, Embedded Test and Measurement Instrument, Battery-Powered Field Controller MAX3232ECDB Texas Instruments 使用用途: Industrial Serial Console, Point-of-Sale Terminal, Battery-Powered Field Controller MAX3237EAI+ Multi-channel RS-232 family option for additional-channel designs 使用用途: Data-Acquisition Equipment, RS-232 Port Expansion MAX3222CAP+TG1Z Related single-channel RS-232 interface for simpler links 使用用途: Data-Acquisition Equipment, Embedded Test and Measurement Instrument, RS-232 Port Expansion
What are the key specifications of MAX3232EEAE+TG1Z that engineers should know?
The MAX3232EEAE+TG1Z is a 2-driver/2-receiver, full-duplex RS-232 transceiver operating from 3.0 V to 5.5 V at data rates up to 1 Mbps. It provides ±15 kV ESD protection and shutdown supply current down to 10 nA in a 16-pin SSOP package. According to the Analog Devices MAX3232 product page and data sheet, Revision 10, the device delivers true RS-232 levels through integrated driver and receiver channels. These ratings make it appropriate for compact, low-power serial interfaces operating from either 3.3 V or 5 V system rails.
Where can I download the MAX3232EEAE+TG1Z datasheet PDF?
The MAX3232EEAE+TG1Z datasheet is available through the Analog Devices MAX3232 product page at https://www.analog.com/en/products/max3232.html. The manufacturer identifies the document as the MAX3232 data sheet, Revision 10. It contains the product-selection table, electrical characteristics, truth tables, capacitor requirements, and application information needed for interface design. The individual ordering-code suffix identifies the 16-pin SSOP configuration and tape-and-reel shipment format, while the electrical family characteristics are defined by the MAX3232 data sheet.
Where can I find the MAX3232EEAE+TG1Z pinout?
Use the pin-description and package drawings in the Analog Devices MAX3232 data sheet, Revision 10, linked from the official MAX3232 product page. The MAX3232EEAE+TG1Z is packaged in a 16-pin SSOP, and its pin functions include the receiver outputs, driver inputs, charge-pump nodes, supply connections, and enable control. Do not infer the complete pin map from a similarly named device because ordering suffixes can indicate different package or temperature options. Confirm every physical connection against the manufacturer drawing before releasing PCB artwork or changing an assembled board.
What is the MAX3232EEAE+TG1Z used for?
The MAX3232EEAE+TG1Z is used to connect TTL or CMOS-compatible logic to a true RS-232 communications port. Its two drivers translate logic levels into bipolar RS-232 signals, while its two receivers perform the reverse conversion. The 3.0 V to 5.5 V supply range suits both 3.3 V and 5 V embedded systems, and the data-rate capability reaches 1 Mbps. According to the manufacturer data sheet, Revision 10, the integrated charge pumps generate the required positive and negative driver voltages internally.
What is the difference between MAX3232EEAE+TG1Z and MAX3232EEAE+?
Both orderable designations identify the same MAX3232E electrical family in a 16-pin SSOP package, but the final ordering suffix distinguishes the shipment form. MAX3232EEAE+TG1Z identifies the tape-and-reel configuration listed for MAX3232EEAE+TG1Z, while MAX3232EEAE+ is the non-tape-and-reel ordering designation. The manufacturer data sheet should be used to confirm the package drawing, temperature grade, and ordering information. A reel packaging designation should not be treated as a different electrical device or as a drop-in replacement with distinct engineering benefits.
What is the best drop-in replacement for MAX3232EEAE+TG1Z?
The closest verified drop-in choices are the same-family MAX3232ECDB and the MAX3232E ordering options that retain the required 16-pin SSOP footprint, but the replacement must be checked for temperature grade, enable behavior, electrical limits, and package dimensions. MAX3222CAP+TG1Z and MAX3237EAI+ are interface-related alternatives, not automatically interchangeable drop-ins because their channel counts differ. According to the Analog Devices MAX3232E product page, MAX3232E is pin, package, and functionally compatible with industry-standard MAX232 devices, providing another compatibility path when its exact ordering code matches the board requirements.
Can MAX3232EEAE+TG1Z replace a MAX232 in an existing PCB?
The MAX3232EEAE+TG1Z can be considered for a MAX232 board when the physical footprint and pin functions match, because Analog Devices states that MAX3232E is pin, package, and functionally compatible with industry-standard MAX232 devices. The power architecture is still important: MAX3232 operates from 3.0 V to 5.5 V and includes low-power shutdown behavior, so the board's supply, enable network, charge-pump capacitors, and logic levels must be reviewed. Confirm the exact MAX232 package and ordering code before declaring a mechanical and electrical drop-in replacement.
Is MAX3232EEAE+TG1Z suitable for a 3.3 V embedded system?
Yes, the MAX3232EEAE+TG1Z is suitable for a 3.3 V embedded system because its documented supply range is 3.0 V to 5.5 V. The host controller's logic levels must also fall within the transceiver's driver and receiver requirements, and the supply decoupling must follow the manufacturer layout. According to the Analog Devices MAX3232 data sheet, Revision 10, the device supports true RS-232 operation without a separate external negative power supply. It is therefore useful for adding a legacy RS-232 port to a modern 3.3 V controller.
How much power does the MAX3232EEAE+TG1Z use?
The MAX3232EEAE+TG1Z can reach shutdown supply current down to 10 nA, while its operating current depends on supply voltage, channel activity, load, and the external charge-pump capacitor values. The 3.0 V to 5.5 V operating range allows direct use from common embedded rails. According to the manufacturer data sheet, Revision 10, the device includes low-power operating and shutdown modes. For a battery-powered design, calculate the complete interface budget rather than using the 10 nA shutdown figure as an estimate of active operating current.
What can replace MAX3232EEAE+TG1Z?
A replacement for MAX3232EEAE+TG1Z must use a compatible 16-pin SSOP footprint and preserve the required 2-driver/2-receiver RS-232 behavior. Verified same-family options include MAX3232ECDB, while MAX3222CAP+TG1Z and MAX3237EAI+ provide related interface functions but require careful pin and channel-count review. The manufacturer states that MAX3232E is compatible with industry-standard MAX232 devices. Use the MAX3232 data sheet, Revision 10, to compare pin functions, supply range, data rate, ESD rating, temperature grade, and capacitor requirements before replacing an assembled design.
Is MAX3232EEAE+TG1Z the same as MAX3232ECDB?
The MAX3232EEAE+TG1Z and MAX3232ECDB belong to the MAX3232E family and can share the same core RS-232 interface, but they are not identical orderable devices. The comparison record specifically identifies MAX3232ECDB as a pin-compatible part whose temperature range is weaker than that of MAX3232EEAE+. Confirm the exact package, temperature grade, pin definitions, and ordering information against the manufacturer documentation. A family relationship supports replacement planning, but it does not by itself authorize substitution in a product with extreme-temperature or regulated industrial requirements.
MAX3232EEAE+TG1Z vs MAX3222CAP+TG1Z: which is better for a dual-port design?
The MAX3232EEAE+TG1Z is the better choice for a dual-port design because it provides two drivers and two receivers, while the MAX3222CAP+TG1Z belongs to a different channel-count family. The MAX3232 also supports data rates up to 1 Mbps and includes ±15 kV ESD protection according to the manufacturer data sheet, Revision 10. Do not treat the MAX3222 as a drop-in replacement without checking every pin because driver and receiver assignments can differ even when both devices implement RS-232. The required channel count and connector mapping should drive the selection.
When should I choose MAX3232EEAE+TG1Z over MAX3237EAI+?
Choose MAX3232EEAE+TG1Z when the design requires a balanced 2-driver/2-receiver interface and needs operation up to 1 Mbps from a 3.0 V to 5.5 V supply. MAX3237EAI+ serves a different multi-channel RS-232 role, so it should be selected only when its additional channels, pinout, supply requirements, and package arrangement satisfy the board design. According to the Analog Devices MAX3232 documentation, the MAX3232E provides ±15 kV ESD protection and shutdown current down to 10 nA, making it a straightforward choice for conventional two-channel serial ports.
Where can I buy MAX3232EEAE+TG1Z and check its current lead time?
Use the Request a Quote form on this product page to request the current price, stock position, minimum order quantity, and lead time for MAX3232EEAE+TG1Z. The request should identify the exact 16-pin SSOP tape-and-reel ordering code so the quotation matches the required package and shipment format. Current commercial conditions can change, so obtain a written response before committing the component to a production schedule. The Analog Devices product page identifies MAX3232 as a production family and provides the relevant documentation for procurement review.
Does the MAX3232EEAE+TG1Z support true RS-232 levels?
Yes, the MAX3232EEAE+TG1Z supports true RS-232 levels through its integrated drivers and charge-pump circuitry. It includes two transmitters and two receivers, operates from 3.0 V to 5.5 V, and reaches data rates up to 1 Mbps. According to the Analog Devices MAX3232 data sheet, Revision 10, it provides ±15 kV ESD protection for interface robustness. The external capacitor network, connector wiring, and signal-return arrangement still determine whether a complete port meets practical EMC and ESD requirements.
What design checks are required for the MAX3232EEAE+TG1Z RS-232 port?
The principal checks are supply decoupling, charge-pump capacitor selection, driver and receiver logic levels, enable polarity, RS-232 cable return, connector protection, and PCB layout. Place the manufacturer-recommended capacitors close to their pins, keep the RS-232 traces short, and provide a controlled ground or signal-return path appropriate to the application. According to the MAX3232 data sheet, Revision 10, the device supports operation from 3.0 V to 5.5 V and up to 1 Mbps. Validate the assembled interface across cable length, temperature, noise, and ESD conditions rather than testing only the logic side.

エンジニアリング参考データ: MAX3232EEAE+TG1Z — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MAX3232EEAE+TG1Z for a compact design that needs two full-duplex RS-232 channels, a 3.0 V to 5.5 V supply range, operation up to 1 Mbps, and the target 16-pin SSOP footprint. MAX3232ECDB is the closest same-family review candidate, but its temperature range is identified as weaker, so it is preferable only where the reduced operating-temperature coverage is acceptable. MAX3222CAP+TG1Z can suit a simpler one-channel interface but does not match the 2/2 channel organization and requires a complete pin review. MAX3237EAI+ offers more channels, making it useful for port expansion when its pin assignments and board resources match. For all three alternatives, verify supply range, enable behavior, logic thresholds, package dimensions, and charge-pump capacitor requirements before replacing the target in production.

代替品との比較

パラメータ この製品 MAX3232ECDB MAX3222CAP+TG1Z MAX3237EAI+
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Package 16-pin SSOP 16-pin SSOP 16-pin SSOP 16-pin SSOP
Driver / Receiver Count 2 / 2 2 / 2 1 / 1 3 / 3
Interface Standard True RS-232 RS-232 RS-232 RS-232

主な差別化要因

  • Balanced two-channel RS-232 interface (vs MAX3222CAP+TG1Z)
  • Higher channel count for port expansion (vs MAX3232EEAE+TG1Z)
  • Stronger temperature suitability for the target design (vs MAX3232ECDB)

設計ノート

Place the MAX3232 charge-pump capacitors at the pins specified by the manufacturer data sheet and keep their return paths short. The SSOP footprint has a narrow lead pitch, so inspect the land pattern against the exact package drawing before fabrication. Route the two RS-232 driver outputs directly toward the connector while keeping them away from clock, switching, and high-current paths. A connector-side ESD or surge device can supplement the transceiver's internal protection when the port is exposed to severe transients.

Decouple the 3.0 V to 5.5 V supply close to the device and follow the capacitance and ESR requirements in the manufacturer data sheet. Calculate both active and shutdown consumption for battery-powered equipment; the shutdown current can be down to 10 nA, but it is not the operating-current budget. Include the charge-pump capacitor losses, logic-level load current, external protection devices, and attached cable-interface loads when evaluating power availability from a 3.3 V or 5 V rail.

Do not treat every 16-pin RS-232 transceiver as interchangeable. The MAX3232 provides a 2/2 driver-receiver organization, while MAX3222 and MAX3237 devices have different channel counts and potentially different pin assignments. Check each numbered pin, enable polarity, receiver output, charge-pump capacitor connection, and exposed pad or lead condition against the exact alternative's documentation. If a released PCB must be reused without routing changes, prefer the same-family option with a matching package and verify its operating-temperature limits before release.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance conclusions require confirmation from the exact ordering code or the manufacturer's current material-compliance documentation.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3232EEAE+TG1Z datasheet MAX3232EEAE+TG1Z specifications MAX3232EEAE+TG1Z pinout MAX3232EEAE+TG1Z equivalent MAX3232EEAE+TG1Z replacement MAX3232EEAE+TG1Z price MAX3232EEAE+TG1Z stock Analog Devices MAX3232EEAE+TG1Z MAX3232EEAE+TG1Z vs MAX3232ECDB MAX3232EEAE+TG1Z vs MAX3222CAP+TG1Z MAX3232EEAE+TG1Z 16-SSOP footprint MAX3232EEAE+TG1Z RS-232 application circuit

関連部品&用語

Analog Devices MAX3232EEAE+TG1Z MAX3232ECDB MAX3222CAP+TG1Z MAX3237EAI+ MAX3232E RS-232 transceiver interface IC line driver line receiver full-duplex communications TTL logic CMOS logic true RS-232 integrated charge pump ESD protection shutdown current 16-pin SSOP SSOP package family surface-mount package SMD industrial serial communication data acquisition point-of-sale terminal RS-232 port expansion
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示