MAX3232EEAE+TG1Z - 1Mbps RS-232 Transceiver | Analog Devices
料号: MAX3232EEAE+TG1Z ✓ 量产中MAX3232EEAE+TG1Z 概述
A transceiver is an interface integrated circuit that combines digital line-driver and receiver functions with the voltage translation required to connect TTL or CMOS logic to an RS-232 port. In the broader semiconductor hierarchy, the MAX3232 is an interface transceiver, a member of the RS-232 interface IC family, and a multi-channel communications device. Its two transmitters convert logic-high and logic-low signals into RS-232 bipolar levels, while its two receivers convert those bipolar levels back into compatible logic levels.
The headline operating features are a 3.0 V to 5.5 V supply range, data rates up to 1 Mbps, and ±15 kV ESD protection. The 2/2 driver-receiver arrangement supports two communications channels in each direction. Low-power shutdown capability is especially useful in battery-operated or intermittently connected equipment because the device can reduce supply current to levels down to 10 nA when the interface is not required.
The MAX3232 family uses integrated charge-pump circuitry to produce the RS-232 voltage levels required by the drivers. Its receiver architecture provides a true RS-232 input threshold and is intended for noisy industrial environments where signal levels can exceed conventional logic limits. The manufacturer also identifies the MAX3232E as pin, package, and functionally compatible with industry-standard MAX232 devices, enabling careful PCB reuse when all operating conditions and enable-control requirements are checked.
Typical applications include industrial serial consoles, data-acquisition equipment, instrumentation, point-of-sale terminals, and embedded systems that communicate through an RS-232 port. Because the interface operates from 3.0 V to 5.5 V, it is appropriate for modern mixed-signal systems in which the host controller may use a 3.3 V supply. Cable length and data rate must be considered together because RS-232 is a point-to-point, unbalanced interface intended primarily for shorter-distance communication.
The primary design consideration is ensuring that every connector, cable, and logic interface matches the bipolar RS-232 electrical specification. Keep the transceiver close to the connector, provide the required charge-pump capacitors using the manufacturer's recommended values and layout, and reserve adequate board space for external protection if the port will be exposed to severe transients. The SSOP package also requires careful assembly planning because its lead pitch is narrower than that of a conventional SOIC package.
This product page combines manufacturer specifications, package and interface details, replacement guidance, comparison parameters, and practical circuit-layout guidance. It is intended to help engineers determine whether the MAX3232EEAE+TG1Z fits an RS-232 design and how to evaluate compatible replacements before changing a released PCB.
直接替换替代料: MAX3232EEAE+TG1Z ——相同封装,引脚兼容。需要 PCB 改动的不同封装料号已排除。
本系列中的变体
可与以下型号直接替换的同系列型号: MAX3232EEAE+TG1Z (相同外形与封装尺寸) ——差异在于 Package, Supply Voltage Range.
MAX3232ECDB
✅ 直接替换联系询价
查看数据手册 →MAX3222CAP+TG1Z
✅ 直接替换📋 参考替代料(不在目录中)
MAX3237EAI+
✅ 直接替换📋 参考替代料(不在目录中)
MAX3232EEAE+TG1Z 规格参数
| Product Type | RS-232 transceiver |
| Driver Count | 2 |
| Receiver Count | 2 |
| Operating Modes | Full duplex |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 1 Mbps |
| ESD Protection | ±15 kV |
| Shutdown Supply Current | Down to 10 nA |
| Interface Standard | True RS-232 |
| 封装 | 16-pin SSOP |
| 安装类型 | Surface mount |
| Supply Type | Single supply |
MAX3232EEAE+TG1Z 16-pin ssop 引脚配置指南
MAX3232EEAE+TG1Z(16-pin ssop 封装)的引脚配置。 引脚编号、功能和连接图在制造商数据手册中定义。请参阅该手册以了解确切的封装尺寸和焊接指南。
暂无详细引脚数据: MAX3232EEAE+TG1Z.
请参阅 数据手册 以查看完整引脚配置。
典型应用
MAX3232EEAE+TG1Z 适用于 6 应用s: Industrial Serial Console, Data-Acquisition Equipment, Point-of-Sale Terminal, Embedded Test and Measurement Instrument, Battery-Powered Field Controller, RS-232 Port Expansion.
Industrial Serial Console
The MAX3232EEAE+TG1Z is appropriate for a compact industrial console because it combines two RS-232 drivers, two receivers, and a 3.0 V to 5.5 V supply range in one 16-pin SSOP package. Its true RS-232 levels allow a controller operating at 3.3 V or 5 V to communicate with service equipment without translating voltages in external logic. The documented data rate reaches 1 Mbps, while ±15 kV ESD protection improves robustness at a connector that may be touched during maintenance. Place the device near the serial connector, use the specified charge-pump capacitors, and route the interface away from switching nodes to reduce noise pickup.
推荐
Data-Acquisition Equipment
A data-acquisition unit can use the MAX3232EEAE+TG1Z to add two full-duplex RS-232 channels to an embedded controller. The 2/2 organization supports command traffic on one channel and measurement or status data on another, while the single 3.0 V to 5.5 V supply simplifies connection to mixed 3.3 V and 5 V hardware. Its low-power shutdown capability, with current down to 10 nA, is useful when the acquisition system operates intermittently. The 1 Mbps capability provides headroom for firmware updates and diagnostic traffic, although cable length and application data rate must remain within RS-232 channel constraints.
推荐
Point-of-Sale Terminal
The MAX3232EEAE+TG1Z suits point-of-sale equipment that must retain an RS-232 connection for a printer, scale, reader, or service interface. Its 3.3 V capability allows direct pairing with modern application processors, and the 16-pin SSOP package limits board area compared with a larger SOIC implementation. Two channels can separate transaction traffic from diagnostics or peripheral control. The integrated ±15 kV ESD protection adds useful connector-side ruggedness, although a production design should still assess whether additional surge, ground-loop, or cable-protection components are required for its installation environment.
推荐
Embedded Test and Measurement Instrument
The MAX3232EEAE+TG1Z can connect an embedded measurement controller to a host computer over RS-232 when legacy instrumentation uses that interface. Its full-duplex 2/2 arrangement supports simultaneous command and response traffic, while the 1 Mbps maximum rate accommodates short bursts of configuration and logging data. The device's 3.0 V to 5.5 V operating range supports both legacy 5 V and modern 3.3 V control platforms. Keep the transceiver near the connector, provide a stable return path, and account for ground-potential differences between connected equipment when defining the interface and cable arrangement.
推荐
Battery-Powered Field Controller
A battery-powered field controller can benefit from the MAX3232EEAE+TG1Z when an RS-232 port is required only intermittently. The device operates from 3.0 V to 5.5 V, which simplifies integration with common low-energy embedded rails, and its shutdown current can fall to 10 nA to reduce standby consumption. Two channels can serve a local accessory and a diagnostic port when both are needed. A complete power budget should separate active transceiver consumption from the 10 nA shutdown figure and include the external charge-pump capacitors, pull networks, external protection devices, and the current consumed by attached accessories.
推荐
RS-232 Port Expansion
The MAX3232EEAE+TG1Z is useful when a base controller needs an additional full-duplex RS-232 port rather than a redesign of its existing communications interface. Two drivers and two receivers allow two logical channels within one device, and the 1 Mbps capability exceeds the throughput of many legacy serial-control protocols. Its 16-pin SSOP package supports compact expansion boards, while the 3.0 V to 5.5 V range permits use with a common 3.3 V processor rail. Verify available I/O pins, port interrupt requirements, and connector isolation before adding the device because channel multiplexing can affect firmware scheduling and driver support.
推荐
推荐产品汇总
工程参考数据: MAX3232EEAE+TG1Z ——对比、设计指导和合规信息。
选型指南
与替代料对比
| 参数 | 本产品 | MAX3232ECDB | MAX3222CAP+TG1Z | MAX3237EAI+ |
|---|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Package | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP | 16-pin SSOP |
| Driver / Receiver Count | 2 / 2 | 2 / 2 | 1 / 1 | 3 / 3 |
| Interface Standard | True RS-232 | RS-232 | RS-232 | RS-232 |
关键差异点
- Balanced two-channel RS-232 interface (对比 MAX3222CAP+TG1Z)
- Higher channel count for port expansion (对比 MAX3232EEAE+TG1Z)
- Stronger temperature suitability for the target design (对比 MAX3232ECDB)
设计说明
Place the MAX3232 charge-pump capacitors at the pins specified by the manufacturer data sheet and keep their return paths short. The SSOP footprint has a narrow lead pitch, so inspect the land pattern against the exact package drawing before fabrication. Route the two RS-232 driver outputs directly toward the connector while keeping them away from clock, switching, and high-current paths. A connector-side ESD or surge device can supplement the transceiver's internal protection when the port is exposed to severe transients.
Decouple the 3.0 V to 5.5 V supply close to the device and follow the capacitance and ESR requirements in the manufacturer data sheet. Calculate both active and shutdown consumption for battery-powered equipment; the shutdown current can be down to 10 nA, but it is not the operating-current budget. Include the charge-pump capacitor losses, logic-level load current, external protection devices, and attached cable-interface loads when evaluating power availability from a 3.3 V or 5 V rail.
Do not treat every 16-pin RS-232 transceiver as interchangeable. The MAX3232 provides a 2/2 driver-receiver organization, while MAX3222 and MAX3237 devices have different channel counts and potentially different pin assignments. Check each numbered pin, enable polarity, receiver output, charge-pump capacitor connection, and exposed pad or lead condition against the exact alternative's documentation. If a released PCB must be reused without routing changes, prefer the same-family option with a matching package and verify its operating-temperature limits before release.
合规信息
Compliance conclusions require confirmation from the exact ordering code or the manufacturer's current material-compliance documentation.