MAX3243ECWI+T - 3/5 RS-232 Transceiver, 250 kbps | Analog Devices
部品番号: MAX3243ECWI+T ✓ 生産中MAX3243ECWI+T 概要
An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. The MAX3243 belongs to the RS-232 interface transceiver class, combining drivers, receivers, charge-pump support, and low-power management in one device. This integration allows a host controller or test system to communicate with RS-232 equipment over a cable-defined serial interface.
Key features include a 3.0 V to 5.5 V supply range, operation up to 250 kbps, full-duplex communication through three transmit and three receive channels, and ±15 kV ESD protection. The 1 µA shutdown supply current helps preserve system energy when the port is idle. The wide 28-SOIC footprint is a practical option for designs requiring more channels than the smaller two- or three-driver transceivers commonly used in compact equipment.
The MAX3243 architecture uses integrated level-shifting drivers and receivers to produce and accept RS-232-compatible signal levels from a low-voltage digital supply. Charge-pump circuitry provides the elevated transmitter voltage required by the RS-232 standard. AutoShutdown reduces power consumption when the connected port carries no valid activity, while receiver-side logic allows the host to recognize a returning signal and reactivate the device.
Typical uses include industrial serial consoles, automated test equipment, data acquisition systems, instrumentation, point-of-sale terminals, and legacy peripheral connectivity. The 250 kbps capability also suits short-distance board-level links, data acquisition links, and configuration interfaces where the nominal RS-232 limit is lower but faster burst traffic is expected.
A critical design consideration is that RS-232 is a point-to-point interface, so each driver should face a single receiver rather than an unterminated multidrop bus. Place transient-protection and connection components where cables enter the enclosure, and confirm that signal levels, ground reference, and cable length satisfy the system communication requirements.
ドロップイン代替品: MAX3243ECWI+T — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MAX3243ECWI+T (同一形状・フットプリント) — 相違点: Package, Product Type, Supply Voltage Range, Receiver Channels.
MAX3243EEWI+T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX3243EWI+T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX3243CWI+T
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MAX3243ECWI+T 仕様
| Product Type | RS-232 transceiver |
| Number of Drivers | 3 drivers |
| Number of Receivers | 3 receivers |
| Supply Voltage Range | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps |
| Duplex Mode | Full duplex |
| ESD Protection | ±15 kV |
| Shutdown Supply Current | 1 µA |
| Low-Power Feature | AutoShutdown |
| Interface Standard | RS-232 |
| パッケージ | 28-SOIC |
| 実装タイプ | Surface mount |
MAX3243ECWI+T 28-soic ピン配置ガイド
MAX3243ECWI+T (28-soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: MAX3243ECWI+T.
詳細は データシート をご参照ください。
主な用途
MAX3243ECWI+T の用途: 6 件s: Industrial Serial Console Interface, Automated Test Equipment, Data Acquisition Systems, Point-of-Sale Terminals, Instrumentation and Measurement Equipment, RS-232 Communication Cables and Port Extenders.
Industrial Serial Console Interface
The MAX3243ECWI+T provides three full-duplex RS-232 channels for an industrial console, service port, or configuration interface. Its 3.0 V to 5.5 V supply range supports both 3.3 V control electronics and conventional 5 V logic, while the 250 kbps rate accommodates fast diagnostic or firmware-transfer traffic. Place the transceiver between the host UART and the external connector, use the pin-description table for channel assignment, and connect transient protection at the cable entry. The 1 µA AutoShutdown state helps an idle instrument avoid wasting power when no operator console is attached.
おすすめ
Automated Test Equipment
The MAX3243ECWI+T is useful in automated test equipment that must control several legacy instruments over RS-232. Three driver and receiver pairs allow independent transmit and receive paths, and 250 kbps signaling can shorten the time required to transfer results or configuration blocks. Its ±15 kV ESD protection improves tolerance during routine fixture connection and disconnection, while AutoShutdown can reduce idle consumption. Keep each driver connected to one receiver, route the cable interface away from sensitive analog sections, and verify the ground-reference strategy between the tester and fixture.
おすすめ
Data Acquisition Systems
The MAX3243ECWI+T can bridge three RS-232 channels between a data-acquisition controller and external modules, sensors, or laboratory peripherals. The 250 kbps rate supports burst-oriented command and result traffic, while the wide 3.0 V to 5.5 V supply range simplifies interfacing with both modern and older control electronics. AutoShutdown is beneficial when acquisition runs are intermittent because the device can enter a 1 µA shutdown state without continuous host intervention. For high-noise environments, maintain a controlled reference ground and place connector-side protection at the enclosure boundary.
おすすめ
Point-of-Sale Terminals
The MAX3243ECWI+T supports a point-of-sale terminal that needs multiple serial connections for a display, printer, scanner, or payment peripheral. Three full-duplex channels reduce the number of separate interface ICs, and the 3.0 V to 5.5 V range allows use with a 3.3 V system controller. The AutoShutdown function lowers idle consumption when peripherals are disconnected, while ±15 kV ESD protection helps the terminal withstand repeated mating of customer-facing cables. Route each cable to a defined protection network and avoid connecting RS-232 drivers to multi-drop bus wiring.
おすすめ
Instrumentation and Measurement Equipment
The MAX3243ECWI+T fits bench instruments that offer several service or control ports for legacy analyzers, printers, and external fixtures. Its 250 kbps maximum rate supports command traffic beyond the conventional low-speed RS-232 range, and the 28-SOIC package provides a straightforward surface-mount assembly process. The 1 µA AutoShutdown supply current is useful for portable or intermittently powered instruments, while the ±15 kV interface protection assists during routine operator connections. Confirm the ambient temperature requirement and use a common reference ground for reliable data transfer.
おすすめ
RS-232 Communication Cables and Port Extenders
The MAX3243ECWI+T can be used in cable-side port extenders and communication adapters that add three full-duplex RS-232 paths between equipment and a host. The 3.0 V to 5.5 V operating range permits local power from either a 3.3 V or 5 V rail, and 250 kbps signaling preserves throughput for burst transfers. AutoShutdown lets an idle extender consume only 1 µA, while ±15 kV ESD protection improves robustness at the user-accessible connector. Maintain point-to-point driver connections and follow the manufacturer's pinout when assigning the three channels.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MAX3243ECWI+T — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MAX3243EEWI+T | MAX3243EWI+T | MAX3243CWI+T |
|---|---|---|---|---|
| Package | 28-SOIC | 28-SOIC | 28-SOIC | 28-SOIC |
| Brand | Analog Devices | Analog Devices | Analog Devices | Analog Devices |
| Transceiver Configuration | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver | 3/5 RS-232 transceiver |
| Supply Voltage Range | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V | 3.0 V to 5.5 V |
| Maximum Data Rate | 250 kbps | 250 kbps | 250 kbps | 250 kbps |
| ESD Protection | ±15 kV | ±15 kV | ±15 kV | ±15 kV |
| Shutdown Supply Current | 1 µA | 1 µA | 1 µA | 1 µA |
| Low-Power Control | AutoShutdown | AutoShutdown | AutoShutdown | AutoShutdown |
| Duplex Mode | Full duplex | Full duplex | Full duplex | Full duplex |
主な差別化要因
- Three full-duplex RS-232 channels in one transceiver (vs MAX232ACWE+T)
- Higher signaling rate for burst serial traffic (vs MAX3243EAI+T)
- Wide low-voltage supply compatibility (vs MAX3232ECPWR)
- Automatic low-power state with defined family behavior (vs MAX3232ICAE)
設計ノート
RS-232 is a point-to-point interface, not a multidrop bus. Connect each driver output to one receiver input and do not share a driver across several receivers without a designed switching network. Confirm the ground reference between the two endpoints because the receiver interprets signal voltage relative to that ground. Use the pin-description table in the MAX3243 manufacturer datasheet to assign the three transmit and receive channels before laying out the board.
Keep the charge-pump and driver circuitry away from sensitive analog inputs, and follow the manufacturer layout guidance for the charge-pump capacitors and AutoShutdown connection. Place input and output bypass capacitors close to their designated pins with the shortest possible return path to ground. Route the RS-232 connector through a defined transient-protection region, and maintain separation between external cable paths and sensitive circuitry to reduce electrostatic-discharge and ground-current coupling.
The MAX3243ECWI+T can operate from 3.0 V to 5.5 V, but the UART and cable interface must be compatible with the selected rail. Verify the supply tolerance, decouple the device at its power pins, and account for the charge-pump load when designing the 3.3 V or 5 V source. When AutoShutdown is used, confirm that the expected receiver wake-up behavior meets the system's communication-latency requirement. The 1 µA shutdown current is a shutdown-state figure, not the operating current.
A cable-attached RS-232 port can inject transient energy whenever a user connects or disconnects equipment. Use the ±15 kV ESD capability of the MAX3243 as one layer of protection, and add connector-side protection for longer industrial cables or severe environments. Provide a low-impedance chassis and signal-ground strategy near the enclosure entry point. Avoid long unprotected traces between the connector and the transceiver, and test the completed board against the intended cable length and grounding environment.
コンプライアンス情報
The MAX3243 family is an RS-232 interface transceiver rather than an automotive-qualified product. Detailed compliance declarations should be confirmed for the exact MAX3243ECWI+T ordering code through the manufacturer product page or a request for material compliance documentation.