Analog Devices

MAX3243ECWI+T - 3/5 RS-232 Transceiver, 250 kbps | Analog Devices

MPN: MAX3243ECWI+T ✓ Aktif
3.0 V to 5.5 V Vdss 1 µA Id 28-SOIC Package
MOQ: 1 |

MAX3243ECWI+T Genel Bakış

The Analog Devices MAX3243ECWI+T is a 3/5 RS-232 transceiver with three drivers, three receivers, and 250 kbps signaling in a 28-SOIC package. It operates from 3.0 V to 5.5 V, provides ±15 kV ESD protection, and supports automatic shutdown to reduce supply current to 1 µA when no valid receiver signal is detected. AutoShutdown circuitry wakes the device when valid RS-232 activity resumes.

An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. The MAX3243 belongs to the RS-232 interface transceiver class, combining drivers, receivers, charge-pump support, and low-power management in one device. This integration allows a host controller or test system to communicate with RS-232 equipment over a cable-defined serial interface.

Key features include a 3.0 V to 5.5 V supply range, operation up to 250 kbps, full-duplex communication through three transmit and three receive channels, and ±15 kV ESD protection. The 1 µA shutdown supply current helps preserve system energy when the port is idle. The wide 28-SOIC footprint is a practical option for designs requiring more channels than the smaller two- or three-driver transceivers commonly used in compact equipment.

The MAX3243 architecture uses integrated level-shifting drivers and receivers to produce and accept RS-232-compatible signal levels from a low-voltage digital supply. Charge-pump circuitry provides the elevated transmitter voltage required by the RS-232 standard. AutoShutdown reduces power consumption when the connected port carries no valid activity, while receiver-side logic allows the host to recognize a returning signal and reactivate the device.

Typical uses include industrial serial consoles, automated test equipment, data acquisition systems, instrumentation, point-of-sale terminals, and legacy peripheral connectivity. The 250 kbps capability also suits short-distance board-level links, data acquisition links, and configuration interfaces where the nominal RS-232 limit is lower but faster burst traffic is expected.

A critical design consideration is that RS-232 is a point-to-point interface, so each driver should face a single receiver rather than an unterminated multidrop bus. Place transient-protection and connection components where cables enter the enclosure, and confirm that signal levels, ground reference, and cable length satisfy the system communication requirements.

Drop-in alternatifler için MAX3243ECWI+T — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.

Bu Serideki Variantlar

Yedek parça uyumlu olan aynı serideki modeller MAX3243ECWI+T (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, Supply Voltage Range, Receiver Channels.

Analog Devices
Package: 28-pin wide SOIC
Product Type: 3-driver, 5-receiver RS-232 transceiver
Supply Voltage Range: 3 V to 5.5 V
İle Karşılaştır MAX3243ECWI+T →
Analog Devices
Package: 28-SOIC, 7.50 mm width
Receiver Channels: 5
İle Karşılaştır MAX3243ECWI+T →
Analog Devices
Package: 28-pin SOIC
Receiver Channels: 5 channels
İle Karşılaştır MAX3243ECWI+T →

MAX3243EEWI+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 28-SOIC
RS-232 transceiver · 3 · 5 · 3/5 full RS-232 · 3.0 V to 5.5 V · 250 kbps · ±15 kV · 1 µA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243EWI+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 28-SOIC
RS-232 transceiver · 3 channels · 5 channels · 3 V to 5.5 V · 250 kbps · ±15 kV · 1 µA · Full duplex

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243CWI+T

✅ Yerleştirme ⚠️ Onaylanmamış Özellikler
Analog Devices
📦 28-SOIC
3-driver, 5-receiver RS-232 transceiver · 3 V to 5.5 V · 250 kbps · 3 channels · 5 channels · 1 complementary receiver channel · ±15 kV · 1 µA

Fiyat için iletişime geçin

Veri Şablonunu Görüntüle →

MAX3243ECWI+T Özellikler

Product Type RS-232 transceiver
Number of Drivers 3 drivers
Number of Receivers 3 receivers
Supply Voltage Range 3.0 V to 5.5 V
Maximum Data Rate 250 kbps
Duplex Mode Full duplex
ESD Protection ±15 kV
Shutdown Supply Current 1 µA
Low-Power Feature AutoShutdown
Interface Standard RS-232
Paket 28-SOIC
Montaj Türü Surface mount

MAX3243ECWI+T 28-soic Pin Yapısı Kılavuzu

MAX3243ECWI+T (28-soic paket) için pin yapısı. Pin numaralandırma, işlevleri ve bağlantı şemaları üretici veri kitapçığında tanımlanmıştır. Doğru ayak ve soldurma kılavuzları için onu referans alın.

28-soic paket pin çizelgesi için MAX3243ECWI+T

Ayrıntılı pin çıkış verisi mevcut değil: MAX3243ECWI+T.

Aşağıdaki veri sayfası tam pin konfigürasyonu için.

Tipik Uygulamalar

MAX3243ECWI+T için uygundur 6 uygulamas: Industrial Serial Console Interface, Automated Test Equipment, Data Acquisition Systems, Point-of-Sale Terminals, Instrumentation and Measurement Equipment, RS-232 Communication Cables and Port Extenders.

🏭

Industrial Serial Console Interface

The MAX3243ECWI+T provides three full-duplex RS-232 channels for an industrial console, service port, or configuration interface. Its 3.0 V to 5.5 V supply range supports both 3.3 V control electronics and conventional 5 V logic, while the 250 kbps rate accommodates fast diagnostic or firmware-transfer traffic. Place the transceiver between the host UART and the external connector, use the pin-description table for channel assignment, and connect transient protection at the cable entry. The 1 µA AutoShutdown state helps an idle instrument avoid wasting power when no operator console is attached.

🖥️

Automated Test Equipment

The MAX3243ECWI+T is useful in automated test equipment that must control several legacy instruments over RS-232. Three driver and receiver pairs allow independent transmit and receive paths, and 250 kbps signaling can shorten the time required to transfer results or configuration blocks. Its ±15 kV ESD protection improves tolerance during routine fixture connection and disconnection, while AutoShutdown can reduce idle consumption. Keep each driver connected to one receiver, route the cable interface away from sensitive analog sections, and verify the ground-reference strategy between the tester and fixture.

📊

Data Acquisition Systems

The MAX3243ECWI+T can bridge three RS-232 channels between a data-acquisition controller and external modules, sensors, or laboratory peripherals. The 250 kbps rate supports burst-oriented command and result traffic, while the wide 3.0 V to 5.5 V supply range simplifies interfacing with both modern and older control electronics. AutoShutdown is beneficial when acquisition runs are intermittent because the device can enter a 1 µA shutdown state without continuous host intervention. For high-noise environments, maintain a controlled reference ground and place connector-side protection at the enclosure boundary.

🖥️

Point-of-Sale Terminals

The MAX3243ECWI+T supports a point-of-sale terminal that needs multiple serial connections for a display, printer, scanner, or payment peripheral. Three full-duplex channels reduce the number of separate interface ICs, and the 3.0 V to 5.5 V range allows use with a 3.3 V system controller. The AutoShutdown function lowers idle consumption when peripherals are disconnected, while ±15 kV ESD protection helps the terminal withstand repeated mating of customer-facing cables. Route each cable to a defined protection network and avoid connecting RS-232 drivers to multi-drop bus wiring.

🔧

Instrumentation and Measurement Equipment

The MAX3243ECWI+T fits bench instruments that offer several service or control ports for legacy analyzers, printers, and external fixtures. Its 250 kbps maximum rate supports command traffic beyond the conventional low-speed RS-232 range, and the 28-SOIC package provides a straightforward surface-mount assembly process. The 1 µA AutoShutdown supply current is useful for portable or intermittently powered instruments, while the ±15 kV interface protection assists during routine operator connections. Confirm the ambient temperature requirement and use a common reference ground for reliable data transfer.

🌐

RS-232 Communication Cables and Port Extenders

The MAX3243ECWI+T can be used in cable-side port extenders and communication adapters that add three full-duplex RS-232 paths between equipment and a host. The 3.0 V to 5.5 V operating range permits local power from either a 3.3 V or 5 V rail, and 250 kbps signaling preserves throughput for burst transfers. AutoShutdown lets an idle extender consume only 1 µA, while ±15 kV ESD protection improves robustness at the user-accessible connector. Maintain point-to-point driver connections and follow the manufacturer's pinout when assigning the three channels.

What is the MAX3243ECWI+T?
The MAX3243ECWI+T is a 3/5 RS-232 transceiver from Analog Devices with three drivers, three receivers, full-dupplex operation, and a maximum signaling rate of 250 kbps. It operates from 3.0 V to 5.5 V and includes ±15 kV ESD protection. The device is packaged in a 28-SOIC format. According to the MAX3243 manufacturer datasheet, the integrated AutoShutdown function reduces supply current to 1 µA when no valid receiver activity is present.
What is the operating voltage of MAX3243ECWI+T?
The MAX3243ECWI+T operates from 3.0 V to 5.5 V, allowing either 3.3 V or 5 V system rails. The MAX3243 manufacturer datasheet identifies this wide supply range as a core feature of the device. Check the exact power-supply tolerance and the receiver and driver common-mode limits for the selected operating condition. When designing a 3.3 V system, verify that the connected UART and external interface signals remain within the device's specified logic thresholds.
What is the maximum data rate of MAX3243ECWI+T?
The MAX3243ECWI+T supports a maximum data rate of 250 kbps. This value is identified on the Analog Devices product page and in the MAX3243 manufacturer datasheet for the 3/5 RS-232 transceiver family. The rate is useful for short-distance serial links that carry configuration commands, sampled data, or diagnostic traffic. It does not change the physical limitations of the RS-232 standard, so cable characteristics, grounding, and the connected endpoint still determine reliable communication distance.
How many RS-232 channels does MAX3243ECWI+T provide?
The MAX3243ECWI+T provides three RS-232 drivers and three RS-232 receivers, supporting three bidirectional serial channels in a full-duplex arrangement. The manufacturer describes the MAX3243 as a 3/5 transceiver, meaning it contains three drivers and five receiver-related functions in the family architecture while remaining suitable for three complete communications channels. Use the pin-description table in the manufacturer datasheet when assigning each channel and its direction on the PCB.
Does MAX3243ECWI+T have ESD protection?
Yes, the MAX3243ECWI+T includes ±15 kV ESD protection on its RS-232 interface. This protection level is stated by both the Analog Devices product page and the MAX3243 manufacturer datasheet. It improves tolerance when a user connects or disconnects an external cable, although it does not replace a properly designed enclosure, chassis grounding plan, or additional surge protection for long cables exposed to industrial transients.
What is AutoShutdown on the MAX3243ECWI+T?
AutoShutdown is the MAX3243's automatic low-power function that disables the internal supply and drivers when the receiver inputs do not detect a valid signal level. According to the MAX3243 manufacturer datasheet, shutdown supply current falls to 1 µA. The circuit reactivates when valid RS-232 activity returns, reducing the need for software to manage the interface continuously. Verify whether the application expects wake-up latency or repeated activity on a particular receiver channel.
Where can I download the MAX3243ECWI+T datasheet?
The MAX3243ECWI+T datasheet is available through the Analog Devices MAX3243 product page at https://www.analog.com/en/products/max3243.html. The device data sheet contains the recommended operating conditions, pin descriptions, electrical characteristics, driver and receiver diagrams, and typical application circuits. Use the ordering information within the same document to confirm the MAX3243ECWI+T package code and the meaning of its temperature and tape-and-reel suffix.
Where can I find the MAX3243ECWI+T pinout?
The MAX3243ECWI+T pinout is documented in the pin-description table of the MAX3243 manufacturer datasheet. The device uses a 28-SOIC package with dedicated driver, receiver, supply, ground, charge-pump, and AutoShutdown-related connections. Use that table to confirm signal names and alternate functions before laying out the board. The exact package drawing and pin numbering should be taken from the manufacturer documentation rather than inferred from another RS-232 transceiver.
What can replace the MAX3243ECWI+T?
A direct replacement should retain the 28-SOIC footprint, pin assignment, 3.0 V to 5.5 V operation, three-driver and three-receiver arrangement, and AutoShutdown behavior. The MAX3243EEWI+T and MAX3243EWI+T are the closest same-family candidates identified for evaluation, while cross-brand choices require separate pin and parameter validation. According to the MAX3243 manufacturer datasheet, AutoShutdown operation is part of the device family. Request a formal manufacturer or distributor cross-reference before committing to a second source.
Is the MAX3243ECWI+T the same as the MAX3243EEWI+T?
The MAX3243EEWI+T is a closely related member of the same MAX3243 transceiver family, but the exact suffix identifies ordering, temperature, and packaging options that must be compared with the MAX3243ECWI+T. The Analog Devices MAX3243 documentation is the controlling reference for electrical ratings and pin functions. Treat the devices as equivalent only after confirming the package dimensions, temperature range, and ordering code. Request the manufacturer ordering table to verify production suitability.
What is the best Analog Devices equivalent for MAX3243ECWI+T?
The closest Analog Devices alternatives are the MAX3243EEWI+T and MAX3243EWI+T, both selected from the MAX3243 family because they share the core 3/5 transceiver architecture, 3.0 V to 5.5 V supply range, 250 kbps rate, and ±15 kV ESD protection. They are not automatically interchangeable until package code, temperature grade, and pin configuration are confirmed. The manufacturer MAX3243 datasheet and ordering information should be used for the final equivalence decision.
When should I choose the MAX3243ECWI+T instead of another RS-232 transceiver?
Choose the MAX3243ECWI+T when the design requires three full-duplex RS-232 channels, a 3.0 V to 5.5 V operating range, and a maximum rate of 250 kbps in a 28-SOIC package. Its 1 µA AutoShutdown state and ±15 kV ESD protection are useful for intermittently connected equipment. Choose a smaller-channel device when only one or two RS-232 ports are needed, or choose a different package family when PCB area—not electrical capability—is the limiting factor.
Is MAX3243ECWI+T suitable for industrial test equipment?
The MAX3243ECWI+T is suitable for many industrial test and configuration interfaces that need three RS-232 ports, 3.0 V to 5.5 V operation, and up to 250 kbps data transfer. The 1 µA shutdown current supports power-conscious instruments, while ±15 kV ESD protection improves robustness during routine cable handling. For factory-floor cables, add enclosure-level surge and grounding protection, and confirm the device's specified temperature range against the ambient conditions.
Where can I buy MAX3243ECWI+T online?
Use the Request a Quote form on this page to request current MAX3243ECWI+T pricing, stock confirmation, and lead time for the exact 28-SOIC ordering code. The quote team can confirm whether the tape-and-reel suffix is available and whether your required quantity meets the manufacturer's packaging increment. Because availability and pricing change by region and order volume, request a written quotation rather than relying on a historical catalog amount.
What is the price of MAX3243ECWI+T?
Current MAX3243ECWI+T pricing is handled through the Request a Quote form on this page, which can return a quantity-based quotation for the exact manufacturer ordering code. Confirm that the quote covers MAX3243ECWI+T with the required 28-SOIC package and tape-and-reel presentation. Larger quantities or scheduled production orders may receive different commercial terms, so request the quotation with your forecast quantity and target delivery schedule.
What is the lead time and stock status of MAX3243ECWI+T?
Request the current lead time, available stock, and minimum order quantity through the Request a Quote form on this page. The form should be completed with the exact MPN MAX3243ECWI+T, the required annual usage, and the scheduled assembly dates. Lead time can vary with manufacturer inventory, allocated production capacity, and order quantity. For safety stock planning, request both committed production lead time and the current available quantity rather than treating a distributor listing as a guaranteed allocation.

Mühendislik referans verileri: MAX3243ECWI+T — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.

Seçim Kılavuzu

Choose the MAX3243ECWI+T when the board needs three full-duplex RS-232 ports, operation from a 3.0 V to 5.5 V rail, and a maximum rate of 250 kbps. Its 28-SOIC footprint is appropriate when three channels are worth the package area, and AutoShutdown is useful in portable or intermittently connected systems. Choose MAX3243EEWI+T or MAX3243EWI+T when an ordering or temperature-grade alternative within the same family is preferred, but verify the suffix against the manufacturer ordering information. Choose a single-channel MAX232 or MAX3232 device when only one or two ports are required and PCB area dominates the design. Do not substitute an SSOP, TSSOP, or narrow-SOIC member without a PCB redesign, and confirm the operating-temperature range before production release.

Alternatiflerle Karşılaştırma

Parametre Bu Ürün MAX3243EEWI+T MAX3243EWI+T MAX3243CWI+T
Package 28-SOIC 28-SOIC 28-SOIC 28-SOIC
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Transceiver Configuration 3/5 RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver 3/5 RS-232 transceiver
Supply Voltage Range 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V 3.0 V to 5.5 V
Maximum Data Rate 250 kbps 250 kbps 250 kbps 250 kbps
ESD Protection ±15 kV ±15 kV ±15 kV ±15 kV
Shutdown Supply Current 1 µA 1 µA 1 µA 1 µA
Low-Power Control AutoShutdown AutoShutdown AutoShutdown AutoShutdown
Duplex Mode Full duplex Full duplex Full duplex Full duplex

Ana Farklılayıcılar

  • Three full-duplex RS-232 channels in one transceiver (karşılaştırma:MAX232ACWE+T)
  • Higher signaling rate for burst serial traffic (karşılaştırma:MAX3243EAI+T)
  • Wide low-voltage supply compatibility (karşılaştırma:MAX3232ECPWR)
  • Automatic low-power state with defined family behavior (karşılaştırma:MAX3232ICAE)

Tasarım Notları

RS-232 is a point-to-point interface, not a multidrop bus. Connect each driver output to one receiver input and do not share a driver across several receivers without a designed switching network. Confirm the ground reference between the two endpoints because the receiver interprets signal voltage relative to that ground. Use the pin-description table in the MAX3243 manufacturer datasheet to assign the three transmit and receive channels before laying out the board.

Keep the charge-pump and driver circuitry away from sensitive analog inputs, and follow the manufacturer layout guidance for the charge-pump capacitors and AutoShutdown connection. Place input and output bypass capacitors close to their designated pins with the shortest possible return path to ground. Route the RS-232 connector through a defined transient-protection region, and maintain separation between external cable paths and sensitive circuitry to reduce electrostatic-discharge and ground-current coupling.

The MAX3243ECWI+T can operate from 3.0 V to 5.5 V, but the UART and cable interface must be compatible with the selected rail. Verify the supply tolerance, decouple the device at its power pins, and account for the charge-pump load when designing the 3.3 V or 5 V source. When AutoShutdown is used, confirm that the expected receiver wake-up behavior meets the system's communication-latency requirement. The 1 µA shutdown current is a shutdown-state figure, not the operating current.

A cable-attached RS-232 port can inject transient energy whenever a user connects or disconnects equipment. Use the ±15 kV ESD capability of the MAX3243 as one layer of protection, and add connector-side protection for longer industrial cables or severe environments. Provide a low-impedance chassis and signal-ground strategy near the enclosure entry point. Avoid long unprotected traces between the connector and the transceiver, and test the completed board against the intended cable length and grounding environment.

Uyumluluk Bilgisi

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Kadmiyumdan Arınmış
Unknown
Klorofillerden Arınmış
Unknown
Çatışma Minerali
Unknown

The MAX3243 family is an RS-232 interface transceiver rather than an automotive-qualified product. Detailed compliance declarations should be confirmed for the exact MAX3243ECWI+T ordering code through the manufacturer product page or a request for material compliance documentation.

Veri doğrulanma tarihi: 2026-11-17 — XAIPART bileşen mühendislik ekibi tarafından doğrulanmış ve derlenmiş veri

İlgili Aramalar

MAX3243ECWI+T datasheet MAX3243ECWI+T pinout MAX3243ECWI+T price MAX3243ECWI+T stock MAX3243ECWI+T equivalent MAX3243ECWI+T replacement MAX3243ECWI+T cross reference MAX3243 3/5 RS-232 transceiver MAX3243 250 kbps 28-SOIC MAX3243 vs MAX3232 Analog Devices MAX3243ECWI+T MAX3243 AutoShutdown RS-232 MAX3243 28-SOIC application circuit MAX3243 3.0V 5.5V interface IC

İlgili Bileşenler ve Terimler

Analog Devices MAX3243ECWI+T MAX3243EEWI+T MAX3243EWI+T MAX3243CWI+T MAX3243 RS-232 RS-232 transceiver serial interface IC full-duplex communication UART AutoShutdown 3.0 V to 5.5 V supply 250 kbps ±15 kV ESD protection 1 µA shutdown current 3/5 transceiver charge pump 28-SOIC surface mount industrial instrumentation automated test equipment data acquisition point-of-sale terminal EMI protection
Hızlı Teklif RFQ
Detayları tam doldurun — satış ekibimiz 24 saat içinde yanıt verecek
Parça Numarası Üretici Paket QTY Hedef Fiyat Genişletilmiş
✓
Teklif gönderildi!

24 saat içinde e-postanıza yanıt vereceğiz

1
RFQ Gönderildi
2
Teklif Alındı
3
Sipariş Yerleştirildi
4
Ödeme
5
Gönderildi
6
Teslim Edildi
RFQ Detaylarını Görüntüle