Analog Devices

MAX3384ECWN+ - 250kbps RS-232 Transceiver | Analog Devices

部品番号: MAX3384ECWN+ ✓ 生産中
3.0V to 5.5V Vdss SSOP-20 Package
MOQ: 1 |

MAX3384ECWN+ 概要

The Analog Devices MAX3384ECWN+ is a 3.0V-powered, 2/2 RS-232 transceiver supporting data rates up to 250kbps in a 20-pin SSOP package. It provides two transmit channels, two receive channels, low-power operation, and enhanced electrostatic-discharge protection for reliable point-to-point serial interfaces.

An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 levels back into digital logic. It belongs to the transceiver hierarchy within interface ICs, providing the physical signaling layer between data-processing equipment and a cable-connected peripheral or system. The MAX3384ECWN+ implements the EIA/TIA-232 and V.28/V.24 signaling requirements described for this device family.

The principal features include operation from a 3.0V to 5.5V supply, operation up to 250kbps, two transmit outputs, two receive inputs, and enhanced ESD protection. Low-power requirements make the device suitable for systems in which interface circuitry must coexist with low-voltage digital logic. The manufacturer describes protection on both transmitter outputs and receiver inputs, which is important when cables may be connected, disconnected, or exposed to electrostatic discharge.

The MAX3384ECWN+ combines true RS-232 line-driver and receiver functions in one integrated circuit. Its powered-down behavior reduces power consumption when the associated subsystem is inactive. Because the interface operates from a single low-voltage supply while generating compliant RS-232 levels, it can simplify designs that would otherwise require separate external line drivers, receivers, and protection networks.

Typical uses include industrial control consoles, point-of-sale terminals, test equipment, instrumentation, and embedded systems that communicate with RS-232 peripherals through cables. The 250kbps capability is useful for moderate-speed serial links, while the integrated two-channel transmitter and receiver arrangement reduces the number of components required for bidirectional or multiport serial interfaces.

The principal design consideration is the difference between RS-232 and TTL-level signaling. The MAX3384ECWN+ is intended for the RS-232 side of the connection; it does not directly accept or produce standard TTL or CMOS logic levels. Layout should preserve short return paths and appropriate grounding, while external protection and cable-length considerations should follow the manufacturer's interface guidance.

This product page combines the device's core electrical characteristics, verified package information, practical application guidance, and documented same-family replacement options. It also distinguishes true pin-compatible alternatives from broader RS-232 interface products that may use a different package, voltage rating, feature set, or channel arrangement.

ドロップイン代替品: MAX3384ECWN+ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MAX3384ECWN+ (同一形状・フットプリント) — 相違点: Maximum Data Rate, Supply Voltage Range, Device Type, Interface Standard, Number of Pins.

Analog Devices
Device Type: 2/2 transceiver, full RS-232
Interface Standard: EIA/TIA-232
Number of Pins: 20 pins
比較対象 MAX3384ECWN+ →
Analog Devices
Maximum Data Rate: 250 kbps
Supply Voltage Range: 3 V to 5.5 V
Interface Standard: EIA/TIA-232, V.28 and V.24
比較対象 MAX3384ECWN+ →

MAX3384ECAP

✅ ドロップイン
Analog Devices
📦 SSOP-20
2/2 transceiver, full RS-232 · 2 channels · 2 channels · 3.0V to 5.5V · 250kbps · ±15kV · EIA/TIA-232 · V.28 and V.24

価格はお問い合わせください

データシートを見る →

MAX3384EEAP

✅ ドロップイン
Analog Devices
📦 SSOP-20
RS-232 transceiver, 2 drivers and 2 receivers · EIA/TIA-232, V.28 and V.24 · 3 V to 5.5 V · 3.3 V · 250 kbps · 2 · 2 · Full duplex

価格はお問い合わせください

データシートを見る →

MAX3384ECWN+ 仕様

Technology RS-232
Device Type Transceiver
Channel Configuration 2/2
Supply Voltage Range 3.0V to 5.5V
Maximum Data Rate 250kbps
Transmitter Channels 2
Receiver Channels 2
Logic Standard EIA/TIA-232 and V.28/V.24
ESD Protection 15kV
動作温度 0C to 70C
Package Type SSOP-20
Package Dimensions 5.30mm long with 0.65mm pitch
ピン数 20 pins
実装タイプ Surface Mount
Power Requirements Low power

MAX3384ECWN+ 5.30mm long with 0.65mm pitch ピン配置ガイド

MAX3384ECWN+ (5.30mm long with 0.65mm pitch パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

MAX3384ECWN+ の 5.30mm long with 0.65mm pitch パッケージピン配置図

詳細なピン配置データはありません: MAX3384ECWN+.

詳細は データシート をご参照ください。

主な用途

MAX3384ECWN+ の用途: 6 件s: Industrial Control Consoles, Point-of-Sale Terminals, Test and Measurement Equipment, Embedded Serial Peripheral Interfaces, RS-232 Port Expansion, Instrumentation and Data Acquisition.

🏭

Industrial Control Consoles

The MAX3384ECWN+ fits industrial consoles and controller boards that communicate with older RS-232 instruments through cables. Its two transmit channels and two receive channels support bidirectional or multiport serial arrangements without requiring separate line-driver and receiver ICs. Operation from 3.0V to 5.5V supports both 3.3V and 5V control-logic rails, while the 250kbps data rate covers many configuration and status protocols. The 15kV ESD protection improves resilience at connector-facing outputs and inputs, although board-level grounding and cable selection remain important in electrically noisy equipment.

📺

Point-of-Sale Terminals

Point-of-sale terminals often connect receipt printers, scales, scanners, and customer displays through legacy RS-232 ports. The MAX3384ECWN+ combines two drivers and two receivers in one 20-pin SSOP, reducing board area in compact peripheral interfaces. Its low-voltage supply operation allows direct connection to a 3.3V or 5V embedded controller, while the maximum 250kbps rate supports typical transactional serial traffic. The enhanced ESD protection is valuable at user-accessible connectors, but a reliable ground reference and appropriately shielded cable are still necessary for reliable operation.

🔧

Test and Measurement Equipment

Laboratory instruments, programmable power supplies, and automated test platforms often retain RS-232 interfaces for legacy computer connections or equipment-to-equipment control. The MAX3384ECWN+ provides a compact two-channel interface for routing command and response signals. Its 250kbps limit is appropriate for many legacy instrumentation protocols, although modern long cables may operate more reliably at lower rates because capacitance and loading increase with frequency. The integrated low-power design also helps satisfy the compact power budgets of portable or benchtop instruments.

🧩

Embedded Serial Peripheral Interfaces

Embedded systems can use the MAX3384ECWN+ to bridge a low-voltage microcontroller to a legacy RS-232 peripheral. Two transmitters support separate outbound paths, while two receivers can monitor responses or status lines from another device. The single 3.0V-to-5.5V supply range simplifies interfacing with embedded processors and programmable logic. Its 15kV ESD protection is beneficial when the transceiver sits near an external connector, but designers should still evaluate whether additional surge, isolation, or galvanic-separation components are required for their installation environment.

🌐

RS-232 Port Expansion

A controller with limited serial resources can expand its interface capability by adding the two transmitters and two receivers in the MAX3384ECWN+. One circuit can implement a bidirectional data path plus auxiliary status or handshake lines, subject to the device's operating constraints. Integration reduces the number of external ICs and the associated board area compared with separate transmitter and receiver packages. For designs requiring more than two channels per direction, multiple MAX3384E devices can be considered after checking address, grounding, and connector-routing requirements.

📡

Instrumentation and Data Acquisition

The MAX3384ECWN+ is appropriate for instrumentation modules that communicate measurement or configuration data over RS-232. Its dual transmitters and dual receivers support data exchange and control-signal monitoring, while operation up to 250kbps is sufficient for numerous sensors, programmable dividers, and legacy data-acquisition equipment. Because unbalanced RS-232 links can be affected by ground-potential differences and cable noise, installation practice matters. Confirm signal levels, line termination, and grounding against the manufacturer's interface guidance before deploying the device in a new system.

What is the MAX3384ECWN+?
The MAX3384ECWN+ is a 2/2 RS-232 transceiver with two transmit channels and two receive channels. According to the Analog Devices MAX3384E product page, it is a 3V-powered EIA/TIA-232 and V.28/V.24 communications interface with low power requirements, data rates up to 250kbps, and enhanced ESD protection. It is packaged in a 20-pin SSOP.
What are the key specifications of MAX3384ECWN+ that engineers should know?
The MAX3384ECWN+ provides two RS-232 transmitters and two receivers, operates from 3.0V to 5.5V, and supports signaling rates up to 250kbps. Its 15kV ESD protection covers the interface-facing transmitter outputs and receiver inputs. The device uses a 20-pin, 5.30mm-long SSOP with a 0.65mm pitch and is specified for 0C to 70C operation.
What supply voltage does MAX3384ECWN+ use?
The MAX3384ECWN+ operates from a 3.0V to 5.5V supply. This range allows the interface to operate from common 3.3V or 5V system rails while producing and receiving true RS-232 levels. The Analog Devices MAX3384E documentation identifies the device as a 3V-powered communications interface.
What is the maximum data rate of MAX3384ECWN+?
The MAX3384ECWN+ supports data rates up to 250kbps. This makes it appropriate for moderate-speed RS-232 links used in instrumentation, industrial control, point-of-sale equipment, and embedded peripheral interfaces. Cable length, capacitance, grounding, and transmitter loading must also be considered when selecting a practical baud rate.
Where can I download the MAX3384ECWN+ datasheet?
The official MAX3384ECWN+ datasheet is available through the Analog Devices MAX3384E product page at https://www.analog.com/en/products/max3384e.html. Use the manufacturer datasheet for the electrical characteristics, RS-232 timing, truth tables, ESD ratings, and package drawing. The product page also links to the device documentation.
Where can I find the MAX3384ECWN+ pinout?
The MAX3384ECWN+ pin assignment is shown in the pin-description and package-drawing sections of the Analog Devices MAX3384E manufacturer datasheet. The verified package information identifies a 20-pin SSOP with a 0.65mm pitch. Assign PCB connections from that pin-description table rather than inferring terminal functions from another RS-232 transceiver.
Is MAX3384ECWN+ suitable for industrial equipment?
The MAX3384ECWN+ is suitable for commercial-temperature equipment rated for 0C to 70C because that is its specified operating-temperature range. It can support industrial control and instrumentation interfaces when the enclosure temperature stays within that range. Applications requiring extended-temperature operation should select a variant explicitly specified for the required temperature range.
Does MAX3384ECWN+ need external RS-232 line drivers?
No. The MAX3384ECWN+ integrates two RS-232 transmit drivers and two receive receivers in one device. External protection or filtering may still be required for a particular cable, connector, or industrial environment, but the basic RS-232 line-driver and receiver functions are integrated. The device also includes enhanced ESD protection on its interface-facing outputs and inputs.
What is the best drop-in replacement for MAX3384ECWN+?
The MAX3384ECAP is the documented drop-in alternative for MAX3384ECWN+. A published comparison identifies the MAX3384ECAP as a complete replacement with consistent terminals, package, and main performance characteristics. Verify the manufacturer datasheet for temperature range, ordering suffix, and any parameter differences before committing it to a regulated design.
Can MAX3384ECAP replace MAX3384ECWN+ without changing the PCB?
Yes, the MAX3384ECAP can replace the MAX3384ECWN+ without changing the PCB when the applicable ordering and temperature requirements are satisfied. The documented comparison describes the devices as having consistent terminals and packages and functionally equivalent principal characteristics. Both are identified as 20-pin SSOP RS-232 transceivers rated for operation up to 250kbps.
What can replace MAX3384ECWN+ in a legacy RS-232 design?
The MAX3384ECAP is the directly documented replacement for MAX3384ECWN+ because it uses the same 20-pin SSOP footprint and closely matches the principal RS-232 transceiver characteristics. Other RS-232 transceivers may require a different footprint or may differ in supply voltage, channel count, ESD rating, or operating-temperature range, so they should not be treated as automatic drop-ins.
Is MAX3384ECWN+ the same as MAX3384ECAP?
The MAX3384ECWN+ and MAX3384ECAP are closely related same-package RS-232 transceivers, but ordering and environmental requirements still need confirmation. Published cross-reference information describes the MAX3384ECAP as a complete replacement for the MAX3384ECWN+, with consistent terminals, package, and principal performance characteristics. Review the manufacturer datasheets for the exact suffix and temperature limits.
When should I choose MAX3384ECWN+ over another RS-232 transceiver?
Choose the MAX3384ECWN+ when the design needs two transmit channels, two receive channels, a 3.0V to 5.5V interface supply, operation up to 250kbps, 15kV ESD protection, and a 20-pin SSOP footprint. Select another RS-232 device only when its supply voltage, channel count, data rate, ESD level, package, or temperature range better fits the system.
MAX3384ECWN+ vs MAX3384ECAP — which is better for a new design?
The MAX3384ECWN+ and MAX3384ECAP are functionally close 20-pin SSOP choices, so the deciding factors are ordering suffix, operating-temperature grade, lifecycle, and procurement status. The MAX3384ECWN+ is identified as the 0C to 70C device, while the MAX3384ECAP is documented as a complete package-compatible replacement. Confirm those details in the manufacturer datasheets before release.
Where can I buy MAX3384ECWN+ and check its current price?
Use the Request a Quote form on this page to request the current price, stock position, lead time, and order quantity for MAX3384ECWN+. The component is a 20-pin SSOP RS-232 transceiver with a 3.0V to 5.5V supply range and a maximum data rate of 250kbps. Packaging details should be confirmed with the quote response.
What is the lead time for MAX3384ECWN+?
The current lead time for MAX3384ECWN+ should be requested through the Request a Quote form on this page. For planning purposes, the device is specified as a 3.0V-to-5.5V, 2/2 RS-232 transceiver in a 20-pin SSOP with a 250kbps maximum data rate. The quote response can confirm available quantity, shipment timing, and order multiple.
Is MAX3384ECWN+ in stock?
Current MAX3384ECWN+ inventory should be confirmed through the Request a Quote form on this page. The device's commercial configuration is a 2/2 RS-232 transceiver in a 20-pin SSOP, operating from 3.0V to 5.5V with enhanced ESD protection. Submit the required quantity and package preference to obtain an availability confirmation.

エンジニアリング参考データ: MAX3384ECWN+ — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MAX3384ECWN+ for a compact two-transmitter, two-receiver RS-232 interface that operates from 3.0V to 5.5V, supports rates up to 250kbps, and includes 15kV ESD protection. Its 20-pin SSOP package is appropriate for equipment with legacy RS-232 ports and a 0C-to-70C operating environment. The MAX3384ECAP is the best documented PCB-compatible alternative when the ordering suffix and temperature requirements meet the design. The MAX3384EEAP can also be reviewed as a same-family, same-package option, but its exact electrical and temperature details require confirmation. Do not substitute a general-purpose RS-232 transceiver unless it matches the footprint, supply range, channel count, ESD rating, data rate, and temperature grade; otherwise, the replacement may require PCB changes or alter system reliability.

代替品との比較

パラメータ この製品 MAX3384ECAP MAX3384EEAP
Brand Analog Devices Analog Devices Analog Devices
Package SSOP-20 SSOP-20 - same package SSOP-20 - same package
Technology RS-232 RS-232 RS-232
Device Type Transceiver Transceiver Transceiver
Channel Configuration 2/2 2/2 2/2
Maximum Data Rate 250kbps 250kbps 250kbps

主な差別化要因

  • Four integrated RS-232 channels in one interface IC (vs MAX3384ECAP)
  • High data-rate capability for legacy serial links (vs MAX3384EEAP)
  • Enhanced ESD protection on interface connections (vs MAX3384ECAP)

設計ノート

Do not connect the MAX3384ECWN+ directly to a TTL or CMOS UART signal and expect RS-232 voltage levels. The transmitter inputs and receiver outputs belong on the logic side of the interface, while the protected transmitter outputs and receiver inputs connect to the RS-232 lines. Confirm pin directions using the manufacturer pin-description table before laying out the PCB.

Keep the RS-232-side traces short, route them away from clocks, switching nodes, and high-slew-current signals, and provide a direct ground return alongside the cable path where practical. Unused receiver inputs should be handled according to the manufacturer truth table and input-bias guidance rather than left floating. Connector protection should supplement, not replace, the device's integrated 15kV ESD protection.

Place local supply-decoupling capacitance close to the device's supply and ground pins, and route high-current return paths without sharing narrow sections with sensitive interface signals. Check the supply voltage during startup and ensure it remains between 3.0V and 5.5V. The low-power operating requirement does not eliminate the need for a stable supply rail when multiple external RS-232 ports share a system.

RS-232 is an unbalanced interface, so cable routing, grounding, and connector quality can affect signal integrity even when the data rate is well below 250kbps. Reduce data rate if the cable is long or heavily loaded, maintain a consistent ground reference between connected equipment, and use shielded cable when it crosses noisy industrial environments. Treat 250kbps as a device capability rather than a guaranteed rate for every cable installation.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance declarations were not established for this exact ordering suffix. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status with Analog Devices before environmental qualification.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MAX3384ECWN+ datasheet MAX3384ECWN+ pinout MAX3384ECWN+ datasheet pdf MAX3384ECWN+ equivalent MAX3384ECWN+ replacement MAX3384ECWN+ vs MAX3384ECAP MAX3384ECWN+ cross reference MAX3384ECWN+ footprint MAX3384ECWN+ spice model MAX3384ECWN+ price MAX3384ECWN+ stock Analog Devices MAX3384ECWN+ MAX3384ECWN+ 250kbps RS-232 MAX3384ECWN+ SSOP-20 interface MAX3384ECWN+ application circuit

関連部品&用語

Analog Devices Maxim Integrated MAX3384ECWN+ MAX3384ECAP MAX3384EEAP MAX3384E RS-232 EIA/TIA-232 V.28 V.24 RS-232 transceiver interface IC line driver receiver 250kbps 3.0V to 5.5V 15kV ESD protection SSOP-20 surface mount industrial control point-of-sale terminal test and measurement equipment embedded serial interface RS-232 port expansion instrumentation
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示