onsemi

MC33074PG - Quad 4.5MHz 44V Op Amp | onsemi

部品番号: MC33074PG ✓ 生産中
3.0 V to 44 V Vdss 14-PDIP, 0.300 inch (7.62 mm) pitch Package
MOQ: 1 |

MC33074PG 概要

onsemi MC33074PG is a general-purpose quad operational amplifier with four single-ended amplifier circuits, a 3.0 V to 44 V supply range, 4.5 MHz gain-bandwidth product, and 13 V/µs slew rate. The device is packaged in a 14-pin PDIP package measuring 0.300 inch, or 7.62 mm, in pitch.

An operational amplifier is an analog signal-conditioning device that uses high open-loop gain to amplify voltage differences between its inputs. The MC33074 belongs to the operational-amplifier, analog-amplifier, and semiconductor hierarchy. It is designed for general-purpose instrumentation, signal conditioning, and feedback-control circuits that can operate from a single supply or split supply. Its common-mode range includes ground potential, which is especially useful in circuits powered from one battery or one low-voltage rail.

The MC33074PG combines 4.5 MHz gain-bandwidth product with a 13 V/µs slew rate, allowing it to process small signals while responding to moderate-amplitude changes without JFET input transistors. The quad configuration places four amplifiers in one 14-pin PDIP package, reducing component count and board space. A 5 mV input offset-voltage figure supports applications requiring repeatable DC amplification and active filtering. The 3.0 V to 44 V supply range accommodates conventional industrial and instrumentation voltage rails.

The bipolar implementation supports operation from split supplies as well as single-supply configurations. This flexibility is useful when a circuit must process signals centered near ground or interface with sensors whose output spans a positive rail. Because the amplifiers share a common package, each channel can perform a different task, such as input amplification, filtering, buffering, error amplification, or output-current-voltage conversion.

Typical uses include low-frequency instrumentation amplifiers, active filters, transducers, sensor-conditioning modules, audio preamplifiers, power-supply control loops, and general industrial control systems. The 4.5 MHz bandwidth is suitable for moderate-frequency precision signal paths, while the 13 V/µs slew rate provides useful transient response for comparator-like and feedback-control tasks. System designers should still verify output swing, output-current capability, input-bias-current effects, and stability for the selected gain and load.

For a stable PCB implementation, use the 14-pin PDIP footprint, provide adequate supply bypassing, and route sensitive input and feedback traces away from high-current outputs. Decoupling capacitors should be placed close to the supply pins. Confirm the common-mode and output-swing limits against the actual circuit rails, especially in single-supply designs where the output may not swing fully to either supply rail.

This product record combines the MC33074 family electrical characteristics, package information, sourcing guidance, verified drop-in options, and practical design notes. It helps engineers identify the correct quad bipolar amplifier, evaluate replacement choices, and plan instrumentation and industrial signal-conditioning layouts around the same 14-pin PDIP footprint.

ドロップイン代替品: MC33074PG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

MC33074APG

✅ ドロップイン
📦 14-PDIP (0.300 inch, 7.62 mm pitch)
Same MC33074 quad-amplifier family and 14-PDIP footprint; suffix and associated grade or qualification limits may differ, with core 4.5 MHz bandwidth and 13 V/µs slew rate retained.

📋 参考代替品(カタログ未掲載)

MC34074APG

✅ ドロップイン
📦 14-PDIP (0.300 inch, 7.62 mm pitch)
MC34074 family offers the same 4.5 MHz gain-bandwidth product and 13 V/µs slew rate; exact offset voltage, temperature grade, and supply limits require comparison.

📋 参考代替品(カタログ未掲載)

MC33074PG 最大定格&電気的特性

Number of Amplifier Circuits 4 circuits
Amplifier Type General-purpose single-ended operational amplifier
Supply Voltage Range 3.0 V to 44 V
Gain-Bandwidth Product 4.5 MHz
Slew Rate 13 V/µs
Input Offset Voltage 5 mV
パッケージ 14-PDIP, 0.300 inch (7.62 mm) pitch
Technology Bipolar
Supply Configuration Single supply or split supply
Common-Mode Input Includes ground potential
Input Transistor Technology Bipolar without JFET device technology
Operating Temperature Class Industrial temperature grade
実装タイプ Through-hole PDIP
Packaging Tube
Lead-Free Status Pb-free

MC33074PG 14-pdip, 0.300 inch (7.62 mm) pitch ピン配置ガイド

MC33074PG (14-pdip, 0.300 inch (7.62 mm) pitch パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

MC33074PG の 14-pdip, 0.300 inch (7.62 mm) pitch パッケージピン配置図

詳細なピン配置データはありません: MC33074PG.

詳細は データシート をご参照ください。

主な用途

MC33074PG の用途: 6 件s: Industrial Sensor Signal Conditioning, Active Audio Filters, Power-Supply Feedback Control, Precision Instrumentation Amplification, Transducer and Bridge Signal Interfaces, General-Purpose Control and Feedback Loops.

🏭

Industrial Sensor Signal Conditioning

The MC33074PG suits industrial sensor modules that need amplification, filtering, and buffering within one package. Its four channels can handle separate stages of a conditioning chain, while the 3.0 V to 44 V supply range supports conventional instrumentation rails. The 5 mV input offset-voltage specification helps define DC error budget, and the 4.5 MHz bandwidth is more than adequate for many low-frequency pressure, temperature, and position sensor signals. Because the common-mode input range includes ground, the device can operate from a single supply when signal levels remain near the lower rail.

🎧

Active Audio Filters

The MC33074PG can implement multi-stage active filters for audio and communication equipment because four amplifiers are integrated in one 14-pin PDIP package. Each stage can provide gain or buffering, helping reduce the number of discrete packages required for a multi-order filter. Its 4.5 MHz gain-bandwidth product provides useful bandwidth for low-frequency audio crossover, equalization, and anti-alias filtering, while the 13 V/µs slew rate supports larger signal transitions. Designers should calculate gain-bandwidth margin and verify output swing against the selected dual- or single-supply configuration.

⚡

Power-Supply Feedback Control

The MC33074PG is appropriate for error-amplifier and supervisory-feedback functions in linear or laboratory power-supply designs. Its 3.0 V to 44 V operating range permits operation from conventional analog rails, and the 4.5 MHz gain-bandwidth product can support loop compensation around moderate-bandwidth regulator topologies. Four amplifiers allow independent use for error amplification, current-limit comparison, voltage-reference buffering, and output monitoring. The design must account for common-mode range, output saturation, and stability at the intended closed-loop gain rather than selecting the amplifier from supply rating alone.

🔧

Precision Instrumentation Amplification

The MC33074PG can form the central gain and filtering stages of a precision instrumentation module using multiple channels in one package. Its bipolar architecture, 5 mV input offset-voltage figure, 4.5 MHz gain-bandwidth product, and 13 V/µs slew rate are relevant to low-frequency measurement circuits where both DC accuracy and transient response matter. A practical design can use one channel for input amplification, one for active filtering, and two for output buffering or reference conditioning. Check input bias current, common-mode limits, and resistor matching before converting the stated offset-voltage figure into a complete error budget.

🧩

Transducer and Bridge Signal Interfaces

The MC33074PG is useful in transducer interfaces that amplify low-level differential or referenced signals and provide active filtering before conversion. Four available amplifiers support input conditioning, gain stages, and output isolation within one 14-pin PDIP footprint. The device's ground-inclusive common-mode range is helpful for sensors operating from a single supply, and its 4.5 MHz bandwidth provides margin for moderate-frequency dynamic response. The 5 mV input offset voltage contributes to the total signal error, so use suitable resistor tolerances and verify input bias-current effects for high-impedance sensor sources.

⚙️

General-Purpose Control and Feedback Loops

The MC33074PG can serve as a general-purpose quad amplifier in industrial control, actuator, and feedback systems. Separate channels may implement error amplification, comparator-style threshold detection, buffering, and signal conditioning, reducing package count in a dense analog board. Its 13 V/µs slew rate supports faster transitions than a basic precision amplifier, while the 4.5 MHz bandwidth provides useful control-loop dynamics. Verify output-current limits, saturation behavior, and stability with the actual feedback network, especially when driving capacitive loads or operating close to the 3.0 V lower supply limit.

What are the key specifications of MC33074PG that engineers should know?
The MC33074PG is a quad bipolar operational amplifier with a 3.0 V to 44 V supply range, 4.5 MHz gain-bandwidth product, 13 V/µs slew rate, and 5 mV input offset voltage. According to onsemi's MC33074 datasheet, the device provides four general-purpose amplifiers in a 14-pin PDIP package with 0.300 inch, or 7.62 mm, pitch. Its common-mode input range includes ground potential, making it suitable for single-supply instrumentation, active filtering, sensor conditioning, and split-supply applications.
Where can I download the MC33074 pdf?
The MC33074 family documentation is available through the official onsemi MC33074 product page, which links to the manufacturer datasheet and supporting material. According to onsemi's MC33074 datasheet, the MC33074PG is the 14-pin PDIP configuration of a quad general-purpose bipolar operational amplifier. Use the manufacturer document for the complete pin description, recommended operating conditions, electrical characteristics, typical performance curves, and application guidance.
Where can I find the MC33074PG pinout?
The MC33074PG pinout is defined by the 14-pin PDIP pin-description table in the onsemi MC33074 datasheet. Use that table when assigning amplifier inputs, outputs, supply rails, and no-connect positions to PCB tracks. The verified product listing identifies the package as 14-PDIP with 0.300 inch, or 7.62 mm, pitch, but it does not reproduce individual pin numbers on the page.
Is MC33074PG suitable for single-supply operation?
Yes, the MC33074PG is suitable for single-supply operation because its common-mode input range includes ground potential. According to onsemi's MC33074 datasheet, the device operates from a 3.0 V to 44 V supply and can also use split supplies. Single-supply designs should still verify output swing at the chosen load because the output does not necessarily reach the positive supply rail.
What is the MC33074PG gain-bandwidth product and slew rate?
The MC33074PG has a 4.5 MHz gain-bandwidth product and a 13 V/µs slew rate. According to onsemi's MC33074 datasheet, these ratings support general-purpose instrumentation, active filtering, and feedback-control applications. Bandwidth and slew rate are distinct limits: bandwidth constrains small-signal frequency response, while slew rate controls how quickly the output can move through larger voltage changes.
What can replace MC33074PG?
MC33074APG is a directly related onsemi option identified by the MC33074 cross-reference listing, while MC34074APG is a closely related quad bipolar amplifier from the wider onsemi family. A true drop-in choice must retain the 14-pin PDIP footprint and the required electrical characteristics. According to onsemi's MC33074 datasheet, the MC33074 family provides 4.5 MHz gain-bandwidth product and 13 V/µs slew rate.
Is MC33074PG the same as MC34074APG?
The MC33074PG and MC34074APG are closely related quad bipolar operational amplifiers, but they are not identical device designations. The comparison listing describes the MC34074APG as offering the same 4.5 MHz gain-bandwidth product and 13 V/µs slew rate and identifies both families as suitable for split- or single-supply operation. Final substitution requires checking the exact pin arrangement, supply limits, temperature grade, offset voltage, and package.
When should I choose MC33074PG over MC34074APG?
Choose MC33074PG when the design specifically calls for the MC33074 general-purpose quad amplifier and its verified 14-PDIP configuration. Choose MC34074APG only after confirming that its exact electrical limits, temperature grade, and pin definitions satisfy the circuit. According to onsemi's MC33074 datasheet, both families are built around bipolar quad amplifiers with 4.5 MHz bandwidth and 13 V/µs slew rate, so device-specific limits determine the final choice.
MC33074PG vs MC34074APG - which is better for instrumentation?
MC33074PG is the preferable choice when the instrumentation design has been qualified around the MC33074 family or explicitly requires that MPN. MC34074APG may be considered when its exact offset, common-mode range, output swing, and temperature limits better satisfy the design. According to onsemi's MC33074 datasheet, the MC33074 family supports 3.0 V to 44 V operation, 4.5 MHz gain-bandwidth product, and ground-inclusive common-mode input.
What is the best onsemi equivalent for MC33074PG?
MC33074APG is the closest onsemi equivalent identified in the MC33074 cross-reference listing. It should be treated as a candidate replacement rather than assumed identical until the exact suffix, temperature grade, offset-voltage limits, and pin functions are checked. According to onsemi's MC33074 datasheet, the family is a quad general-purpose bipolar amplifier with 4.5 MHz bandwidth and 13 V/µs slew rate.
Where to buy MC33074PG online?
Use the Request a Quote form on this page to ask for MC33074PG availability, current lead time, and an order quotation. The part is listed as MC33074PG in a 14-PDIP tube package, so include the full suffix and required quantity when requesting the quote. onsemi's MC33074 family documentation covers the 3.0 V to 44 V supply range and four-amplifier configuration.
What is the price of MC33074PG?
Use the Request a Quote form on this page for the current MC33074PG quotation. Current pricing depends on quantity, order configuration, and supply status, so a static amount can become inaccurate. The part number identifies onsemi's general-purpose quad bipolar operational amplifier in a 14-PDIP package, and onsemi's MC33074 datasheet provides the technical parameters needed for final design review.
What is the lead time for MC33074PG?
Request the current MC33074PG lead time through the Request a Quote form on this page. Lead time can vary with order quantity, manufacturing status, and packaging configuration, so it should be confirmed for the specific production schedule. The component is a 14-PDIP quad operational amplifier with a 3.0 V to 44 V supply range according to onsemi's MC33074 datasheet.
Is MC33074PG in stock?
Use the Request a Quote form on this page to check MC33074PG stock for the required quantity. onsemi lists the MC33074 as an operational-amplifier family, and distributor search results identify MC33074PG as a 14-PDIP general-purpose quad amplifier. Include the tube-packaging requirement and production forecast so the supplier can confirm an appropriate allocation and delivery schedule.
What design considerations matter for MC33074PG power and signal integrity?
Place supply-decoupling capacitors close to the MC33074PG supply pins and keep sensitive input and feedback paths away from output and high-current supply traces. According to onsemi's MC33074 datasheet, the amplifier operates from 3.0 V to 44 V with a 4.5 MHz gain-bandwidth product and 13 V/µs slew rate. Verify common-mode range, output swing, load, and stability at the intended gain because the supply rating alone does not guarantee linear operation.
Does MC33074PG meet automotive or RoHS requirements?
The MC33074PG is identified as a Pb-free 14-PDIP operational amplifier, but RoHS, REACH, and AEC-Q100 status must be confirmed for the exact ordering code before release. According to onsemi's MC33074 datasheet, the part belongs to the MC33071, MC33072, MC33074, MC34071, MC34072, and MC34074 bipolar amplifier families. Compliance documents for the specific MC33074PG suffix should govern the final qualification decision.

エンジニアリング参考データ: MC33074PG — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MC33074PG when a new design specifically requires onsemi's MC33074 family, a quad general-purpose bipolar amplifier, and a 14-PDIP footprint. Its 3.0 V to 44 V supply range, ground-inclusive common-mode input, 4.5 MHz gain-bandwidth product, and 13 V/µs slew rate fit instrumentation, active filtering, transducer interfaces, and control-feedback circuits. Select MC33074APG when the associated suffix or qualification profile matches the product requirements and the exact ordering conditions have been checked. Consider MC34074APG when its detailed electrical limits and temperature grade suit the design better. Before substituting either option, verify the complete pin description, input offset voltage, input bias current, common-mode range, output swing, supply current, and output-current capability against the production circuit.

代替品との比較

パラメータ この製品 MC33074APG MC34074APG
Package 14-PDIP (0.300 inch, 7.62 mm pitch) 14-PDIP (0.300 inch, 7.62 mm pitch) 14-PDIP (0.300 inch, 7.62 mm pitch)
Brand onsemi onsemi onsemi
Number of Amplifier Circuits 4 circuits 4 circuits 4 circuits
Supply Voltage Range 3.0 V to 44 V 3.0 V to 44 V 3.0 V to 44 V
Gain-Bandwidth Product 4.5 MHz 4.5 MHz 4.5 MHz
Slew Rate 13 V/µs 13 V/µs 13 V/µs
Technology Bipolar Bipolar Bipolar
Common-Mode Input Range Includes ground potential Includes ground potential Includes ground potential
Supply Configuration Single supply or split supply Single supply or split supply Single supply or split supply

主な差別化要因

  • Four independent general-purpose amplifiers in one through-hole package (vs MC33074APG)
  • Direct use with low-rail single-supply systems (vs MC34074APG)
  • Useful bandwidth and slew-rate combination for general-purpose analog stages (vs MC33074APG)

設計ノート

Place the supply-decoupling capacitors immediately adjacent to the MC33074PG supply and ground pins, and use the shortest practical return path to the supply reference. Keep the 14-pin PDIP footprint compatible with a standard 0.300 inch, or 7.62 mm, pitch hole pattern. Route each amplifier's non-inverting input, inverting input, and feedback components close together to minimize capacitive pickup, while separating output routes from sensitive input traces.

Treat the 4.5 MHz gain-bandwidth product as a closed-loop design constraint rather than a guaranteed usable bandwidth at every gain. Noise gain, feedback-network impedance, load capacitance, and the 13 V/µs slew rate can limit stability or large-signal response. Check the onsemi MC33074 datasheet for the intended gain, supply, load, and bypass configuration, and include probe capacitance at the output when driving test equipment.

Do not assume that the 3.0 V to 44 V supply rating guarantees full output swing at either rail. In single-supply designs, verify the output range against the selected load and signal amplitude, and confirm that the input common-mode range remains valid throughout operation. Also include the 5 mV input offset-voltage figure in the DC error budget and check input bias-current effects for high-impedance sources.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Yes
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The RS product listing identifies MC33074PG as Pb-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require confirmation for the exact ordering code.

データ検証日: 2026-11-16 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

mc33074 pdf MC33074PG datasheet MC33074PG pinout MC33074PG specifications MC33074PG equivalent MC33074PG replacement MC33074PG cross reference MC33074PG vs MC34074APG MC33074PG 14-PDIP op amp onsemi MC33074PG MC33074PG price MC33074PG stock MC33074PG application circuit

関連部品&用語

onsemi MC33074PG MC33074APG MC34074APG MC33074 family operational amplifier op amp quad amplifier general-purpose amplifier analog amplifier semiconductor bipolar technology gain-bandwidth product slew rate input offset voltage common-mode input range single-supply operation split-supply operation 14-PDIP through-hole package active filter signal conditioning industrial instrumentation RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示