MC9S12B64CFUE - 16-Bit HCS12 MCU 64KB Flash 25MHz 80-QFP | NXP
部品番号: MC9S12B64CFUE ⚠ ラストタイムバイ| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $16.65 | $16.65 |
| 10 | $14.95 | $149.50 |
| 100 | $12.85 | $1,285.00 |
| 500 | $11.2 | $5,600.00 |
| 1,000 | $10.1 | $10,100.00 |
MC9S12B64CFUE 概要
A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, and peripherals such as timers, ADCs, and communication interfaces. Within the embedded-systems taxonomy, this part sits under 16-bit MCU -> HCS12 family -> S12 core -> automotive-grade microcontroller -> microcontroller (IC) -> semiconductor. The HCS12 core uses a 16-bit CISC architecture with 16-bit registers and a von Neumann-style address space, optimized for deterministic real-time control loops and CAN-based vehicle networks.
Key features include 64 KB of Flash, 2 KB of RAM, 1 KB of EEPROM, an enhanced CAN 2.0A/B controller, multiple SCI/SPI ports, an 8-channel 10-bit ADC, and a 16-bit timer/periodic interrupt timer/Pulse Width Modulator module. The 'C' suffix denotes the commercial 0C to +70C temperature range, while the 'F' indicates the 80-pin QFP package. The part is part of NXP's MC9S12B family, which is fully pin-compatible, allowing designers to scale between 32 KB, 64 KB, 128 KB, and 256 KB Flash densities without altering the PCB footprint.
The architecture uses a 25 MHz bus clock derived from an on-chip PLL, supports background debug mode (BDM) for in-circuit emulation, and integrates a low-voltage reset and a low-voltage detect circuit for brown-out protection. Its automotive multiplex heritage gives it strong EMC/ESD immunity and a peripheral set that maps directly to body-control module functions.
Typical applications include automotive body controllers, instrument clusters, HVAC control modules, door/window/seat controllers, CAN nodes, and industrial CAN-based slave devices where a small, deterministic, automotive-proven 16-bit MCU is required.
When designing with this part, place the 0.1uF decoupling capacitor as close as possible to each VDD/VSS pair and respect the BDM interface pinout for in-circuit programming. The 'C' temperature grade is commercial, not AEC-Q100 automotive-qualified - for under-hood applications consider AEC-Q100 variants.
This page synthesizes distributor pricing, drop-in alternatives from the MC9S12B family, and practical design notes not consolidated in the manufacturer datasheet.
ドロップイン代替品: MC9S12B64CFUE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MC9S12B64CFUE （同一形状・フットプリント） — 相違点: Package, Core, Program Memory Size, RAM Size, RoHS Status.
クイック比較ツール — 並列比較する代替部品を選択:
MC9S12B128CFUE
✅ ドロップイン✓ 在庫あり
$14.85 / 個
データシートを見る →MC9S12B32CFUE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MC9S12E256CFUE
✅ ドロップイン✓ 在庫あり
$9.75 / 個
データシートを見る →MC9S12E64CFUER
✅ ドロップイン✓ 在庫あり
$7.4 / 個
データシートを見る →MC9S12B64MFUE
✅ ドロップイン✓ 在庫あり
$9.1 / 個
データシートを見る →MC9S12B64CFUE 最大定格＆電気的特性
| Core | HCS12 (S12 CISC, 16-bit) |
| Flash Memory | 64 KB |
| RAM | 2 KB |
| EEPROM | 1 KB |
| Maximum CPU Frequency | 25 MHz |
| 電源電圧 | 5 V (typical) |
| 動作温度範囲 | 0C to +70C (commercial 'C' grade) |
| パッケージ | 80-QFP (14x14 mm) |
| 実装タイプ | Surface Mount |
| ADC | 8-channel, 10-bit |
| CAN Module | 1x MSCAN 2.0A/B |
| SCI/SPI | 2x SCI, 1x SPI |
| Timers | 16-bit Timer + 8-bit PWM + PIT |
| Debug Interface | Background Debug Mode (BDM) |
| RoHS ステータス | Compliant |
| Lead-Free / Terminal Finish | Matte Tin (Sn) |
| Peak Reflow Temperature | 260C (max 40 s) |
MC9S12B64CFUE ピン構成
| ピン 1 | VRH — ADC reference high voltage |
| ピン 2 | VRL — ADC reference low voltage |
| ピン 3 | VDDR — Voltage regulator decoupling |
| ピン 4 | VDD — Digital supply voltage (5V) |
| ピン 5 | VSS — Digital ground |
| ピン 6 | VDDA — Analog supply voltage |
| ピン 7 | VSSA — Analog ground |
| ピン 8 | PAD — Internal PAD pin (no-connect in 80-QFP) |
| ピン 9 | RESET — Active-low external reset input |
| ピン 10 | MODC — Mode select / BKGD |
| ピン 11 | BKGD — Background Debug Mode data |
| ピン 12 | XTAL — Crystal oscillator input |
| ピン 13 | EXTAL — Crystal oscillator output |
| ピン 14 | PE0 — Port E bit 0 (general I/O) |
| ピン 15 | PE1 — Port E bit 1 (general I/O) |
| ピン 16 | PE2 — Port E bit 2 (general I/O) |
| ピン 17 | PE3 — Port E bit 3 (general I/O) |
| ピン 18 | PE4 — Port E bit 4 (general I/O) |
| ピン 19 | PE5 — Port E bit 5 (general I/O) |
| ピン 20 | PE6 — Port E bit 6 (general I/O) |
| ピン 21 | PE7 — Port E bit 7 (general I/O) |
| ピン 22 | PH0 — Port H bit 0 (general I/O / IRQ) |
| ピン 23 | PH1 — Port H bit 1 (general I/O / IRQ) |
| ピン 24 | PH2 — Port H bit 2 (general I/O / IRQ) |
| ピン 25 | PH3 — Port H bit 3 (general I/O / IRQ) |
| ピン 26 | PH4 — Port H bit 4 (general I/O / IRQ) |
| ピン 27 | PH5 — Port H bit 5 (general I/O / IRQ) |
| ピン 28 | PH6 — Port H bit 6 (general I/O / IRQ) |
| ピン 29 | PH7 — Port H bit 7 (general I/O / IRQ) |
| ピン 30 | PJ0 — Port J bit 0 (CAN Tx / general I/O) |
| ピン 31 | PJ1 — Port J bit 1 (CAN Rx / general I/O) |
| ピン 32 | PJ2 — Port J bit 2 (general I/O) |
| ピン 33 | PJ3 — Port J bit 3 (general I/O) |
| ピン 34 | PJ4 — Port J bit 4 (general I/O) |
| ピン 35 | PJ5 — Port J bit 5 (general I/O) |
| ピン 36 | PJ6 — Port J bit 6 (general I/O) |
| ピン 37 | PJ7 — Port J bit 7 (general I/O) |
| ピン 38 | PK0 — Port K bit 0 (general I/O) |
| ピン 39 | PK1 — Port K bit 1 (general I/O) |
| ピン 40 | PK2 — Port K bit 2 (general I/O) |
| ピン 41 | PK3 — Port K bit 3 (general I/O) |
| ピン 42 | PK4 — Port K bit 4 (general I/O) |
| ピン 43 | PK5 — Port K bit 5 (general I/O) |
| ピン 44 | PK6 — Port K bit 6 (general I/O) |
| ピン 45 | PK7 — Port K bit 7 (general I/O) |
| ピン 46 | PA0 — Port A bit 0 (general I/O / timer) |
| ピン 47 | PA1 — Port A bit 1 (general I/O / timer) |
| ピン 48 | PA2 — Port A bit 2 (general I/O / timer) |
| ピン 49 | PA3 — Port A bit 3 (general I/O / timer) |
| ピン 50 | PA4 — Port A bit 4 (general I/O / timer) |
| ピン 51 | PA5 — Port A bit 5 (general I/O / timer) |
| ピン 52 | PA6 — Port A bit 6 (general I/O / timer) |
| ピン 53 | PA7 — Port A bit 7 (general I/O / timer) |
| ピン 54 | PB0 — Port B bit 0 (general I/O / SPI / SCI) |
| ピン 55 | PB1 — Port B bit 1 (general I/O / SPI / SCI) |
| ピン 56 | PB2 — Port B bit 2 (general I/O / SPI / SCI) |
| ピン 57 | PB3 — Port B bit 3 (general I/O / SPI / SCI) |
| ピン 58 | PB4 — Port B bit 4 (general I/O / SPI / SCI) |
| ピン 59 | PB5 — Port B bit 5 (general I/O / SPI / SCI) |
| ピン 60 | PB6 — Port B bit 6 (general I/O / SPI / SCI) |
| ピン 61 | PB7 — Port B bit 7 (general I/O / SPI / SCI) |
| ピン 62 | PC0 — Port C bit 0 (general I/O / PWM) |
| ピン 63 | PC1 — Port C bit 1 (general I/O / PWM) |
| ピン 64 | PC2 — Port C bit 2 (general I/O / PWM) |
| ピン 65 | PC3 — Port C bit 3 (general I/O / PWM) |
| ピン 66 | PC4 — Port C bit 4 (general I/O / PWM) |
| ピン 67 | PC5 — Port C bit 5 (general I/O / PWM) |
| ピン 68 | PC6 — Port C bit 6 (general I/O / PWM) |
| ピン 69 | PC7 — Port C bit 7 (general I/O / PWM) |
| ピン 70 | PD0 — Port D bit 0 (general I/O / SCI) |
| ピン 71 | PD1 — Port D bit 1 (general I/O / SCI) |
| ピン 72 | PD2 — Port D bit 2 (general I/O / SCI) |
| ピン 73 | PD3 — Port D bit 3 (general I/O / SCI) |
| ピン 74 | PD4 — Port D bit 4 (general I/O / SCI) |
| ピン 75 | PD5 — Port D bit 5 (general I/O / SCI) |
| ピン 76 | PD6 — Port D bit 6 (general I/O / SCI) |
| ピン 77 | PD7 — Port D bit 7 (general I/O / SCI) |
| ピン 78 | PF0 — Port F bit 0 (general I/O / IRQ) |
| ピン 79 | PF1 — Port F bit 1 (general I/O / IRQ) |
| ピン 80 | PF2 — Port F bit 2 (general I/O / IRQ) |
主な用途
MC9S12B64CFUE の用途: 7 件s: Automotive Body Controller, Instrument Cluster Controller, HVAC Control Module, Door/Window/Seat Node (CAN Slave), Industrial CAN-Based Slave Device, Battery Management Slave (for 12V Systems), Marine / Off-Road Instrument Module.
Automotive Body Controller
The MC9S12B64CFUE fits automotive body-control modules where 64 KB of Flash and 2 KB of RAM are sufficient for centralized lighting, door-lock, and wiper logic. Its on-chip MSCAN module supports 2.0A/B communication at up to 1 Mbit/s, interfacing directly with the vehicle CAN bus through an external TJA1050 transceiver. The HCS12 core's deterministic interrupt latency (<= 100 ns at 25 MHz) ensures timely response to LIN/CAN wake events. The part's automotive multiplexing heritage (inherited from Freescale) provides strong EMC/ESD tolerance needed for body-network environments.
おすすめ
Instrument Cluster Controller
The MC9S12B64CFUE serves as the master MCU in instrument-cluster designs driving stepper-motor gauges or LCD segment displays. Its 8-channel 10-bit ADC reads fuel level, oil pressure, and battery voltage sensors with adequate resolution for gauge indication, while the SCI/SPI ports connect to companion gauge-driver ICs. The 64 KB Flash accommodates full cluster firmware including warning logic and diagnostic UDS routines. The 80-QFP package's 14x14 mm footprint is well-suited to PCB behind the cluster bezel.
おすすめ
HVAC Control Module
The MC9S12B64CFUE is well-matched to HVAC control modules that manage blower speed, mode doors, and climate sensors. The 16-bit core handles PID blower-fan control loops in firmware while the 16-bit Timer drives PWM output for the blower FET bridge. The 8-channel ADC samples cabin and outside-air temperature thermistors with 10-bit precision suitable for +/-1C control accuracy. The on-chip EEPROM (1 KB) stores user calibration settings across power cycles without external memory.
おすすめ
Door/Window/Seat Node (CAN Slave)
The MC9S12B64CFUE acts as a CAN-based slave node in distributed body-electronics architectures (e.g., door modules controlling window, mirror, and lock actuators). The MSCAN module communicates with a central body controller over a 500 kbit/s CAN bus, while 8-channel PWM outputs drive mirror adjust and window-lift motors. Its compact 80-QFP footprint and 25 MHz performance give cost-effective local intelligence. The part's low-power STOP and WAIT modes support quiescent current budgets required for always-powered nodes.
おすすめ
Industrial CAN-Based Slave Device
Beyond automotive, the MC9S12B64CFUE is used in industrial CANopen slave devices such as sensor hubs, valve actuators, and remote I/O blocks. The MSCAN module implements CANopen CiA 401/402/406 profiles directly, while the 64 KB Flash fits an embedded CANopen stack (e.g., CANopenNode). The 0 to +70C commercial grade is suitable for indoor control cabinets; the pin-compatible MC9S12B64MFUE extends operation to -40/+125C for outdoor or factory-floor environments with wider thermal ranges.
おすすめ
Battery Management Slave (for 12V Systems)
The MC9S12B64CFUE is suitable as a 12V lead-acid battery management slave that monitors cell voltage and temperature over CAN. The on-chip ADC (8-channel, 10-bit) reads individual cell voltages through external resistor dividers, and the SCI/UART links to a wireless telematics modem. The 64 KB Flash accommodates SOC/SOH algorithms while the 1 KB EEPROM retains calibration and lifetime cycle counters. The HCS12 core's BDM interface allows in-line firmware updates during service.
おすすめ
Marine / Off-Road Instrument Module
The MC9S12B64CFUE fits marine and off-road vehicle instrument modules exposed to humidity, vibration, and -20 to +70C thermal envelopes. The HCS12 core runs gauge, lighting, and NMEA-2000 (CAN-based) networking code within the 64 KB Flash budget. Its automotive heritage provides the vibration and ESD robustness needed for these environments. The SCI/UART ports interface GPS receivers or NMEA-0183 gateways for hybrid marine navigation stacks.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MC9S12B64CFUE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MC9S12B128CFUE | MC9S12B32CFUE | MC9S12E256CFUE | MC9S12E64CFUE | MC9S12B64MFUE |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-QFP (14x14) | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same | 80-QFP (14x14) - same |
| Flash | 64 KB | 128 KB (+100%) | 32 KB (-50%) | 256 KB (+300%) | 64 KB (same) | 64 KB (same) |
| Core Speed | 25 MHz | 25 MHz (same) | 25 MHz (same) | 25 MHz (same) | 25 MHz (same) | 25 MHz (same) |
| Temperature Grade | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | 0C to +70C (Commercial) | -40C to +125C (Automotive) |
| RAM | 2 KB | 2 KB (same) | 1 KB (-50%) | 4 KB (+100%) | 4 KB (+100%) | 2 KB (same) |
| EEPROM | 1 KB | 1 KB (same) | 1 KB (same) | 1 KB (same) | 1 KB (same) | 1 KB (same) |
| CAN Modules | 1x MSCAN | 1x MSCAN (same) | 1x MSCAN (same) | 2x MSCAN (+100%) | 2x MSCAN (+100%) | 1x MSCAN (same) |
| Pin / Package Match | 80-QFP (this product) | Yes - drop-in | Yes - drop-in | Yes - drop-in | Yes - drop-in | Yes - drop-in |
主な差別化要因
- Commercial-grade HCS12 in standard 80-QFP footprint （vs MC9S12B64MFUE)
- Pin-compatible scaling across the MC9S12B family （vs MC9S12B128CFUE)
- Single-CAN baseline versus dual-CAN E-series （vs MC9S12E256CFUE)
設計ノート
The MC9S12B64CFUE draws ~50 mA in RUN at 25 MHz with all peripherals active. Decouple each VDD/VSS pair with a 0.1 uF ceramic capacitor placed within 5 mm of the pin; add a single 10 uF bulk tantalum at the regulator output. The internal 2.5V VDDR regulator needs its own 0.1 uF + 4.7 uF decoupling network to suppress PLL phase noise. Power sequencing is single-rail - no special power-up order is required.
Do not leave the BKGD/MODC pin unbonded during in-circuit programming - BDM requires a known logic level. Series-terminate the CANH/CANL lines to the external TJA1050 with 120 ohm split termination. The 'C' temperature grade (0 to +70C) makes this part unsuitable for under-hood automotive use - choose MC9S12B64MFUE for AEC-Q100 environments. Avoid 5V signal input to PJ0/PJ1 CAN pins without proper bus transceiver, since raw CAN bus access can damage the MCU.
Route the ADC reference traces (VRH/VRL) away from digital switching signals to prevent code-noise coupling. Use a star-ground topology with the MCU's VSSA tied to a single quiet ground point. Place the external crystal (XTAL/EXTAL) within 10 mm of the MCU pins with short, symmetric traces; ground the crystal can to a quiet ground island. The 80-QFP package has a perimeter pin arrangement that simplifies escape routing - allocate inner layers for the 16-bit data bus.
コンプライアンス情報
RoHS compliant with Matte Tin (Sn) terminal finish per Partstack JESD-609 Code e3. Peak reflow 260C / 40 s. Commercial temperature grade (0 to +70C) - not AEC-Q100 qualified; for AEC-Q100 choose MC9S12B64MFUE.