Microchip Technology

MCP3422A1-E/MC - 18-Bit Dual-Channel ADC | Microchip

部品番号: MCP3422A1-E/MC ✓ 生産中
2.048 V Vdss 8-DFN, 2 x 3 mm Package
MOQ: 1 |

MCP3422A1-E/MC 概要

The Microchip Technology MCP3422A1-E/MC is a dual-channel, 18-bit delta-sigma analog-to-digital converter with differential inputs, a 240 SPS conversion rate, and an 8-DFN 2 x 3 mm package. Its integrated precision reference supports a differential input range of ±2.048 V, while its two-wire I2C interface provides compact communication with embedded systems.

A delta-sigma ADC is a voltage-regulating class of data-conversion IC that uses continuous-time or sampled internal signals to measure an analog differential voltage. Its hierarchy is ADC > delta-sigma ADC > data converter > integrated circuit. The architecture favors high resolution and low noise rather than very high conversion speed, making this device appropriate for slowly changing sensor signals rather than waveform or high-speed acquisition systems.

Key features include two differential input channels, resolution up to 18 bits, an integrated 2.048 V reference, and a 240 SPS maximum conversion rate identified for the MCP3422A1-E/MC. The I2C interface reduces the number of signal lines required from a sensor module to the host controller. Differential measurement also helps reject common-mode noise when the two input wires experience similar external interference.

The MCP3422 family uses a delta-sigma conversion architecture optimized for precision measurement. Its resolution and reference arrangement support high-accuracy measurements of low-level analog signals, while differential inputs can be connected to sensor bridges, potentiometers, or other balanced sensing networks. The 8-DFN package minimizes PCB area, but its exposed pad and thermal requirements must be considered when laying out the board and setting copper coverage.

Typical applications include industrial pressure and temperature acquisition, current monitoring, laboratory measurement instruments, portable sensor nodes, and process-control equipment. Two channels can measure a differential sensor pair or two related inputs, while the digital interface allows readings to be transferred directly to an MCU or embedded controller. For applications requiring faster conversion, designers should select a different ADC rather than increase the load on this converter.

Place input, reference, and decoupling capacitors close to their associated pins, keep analog routing away from switching nodes, and connect the exposed pad to a properly sized ground plane. Confirm the differential input range, gain configuration, conversion time, I2C address, and acquisition sequence against the manufacturer's datasheet before finalizing the analog front end.

This page combines the MCP3422A1-E/MC electrical characteristics, package details, pin-compatible family alternatives, comparison parameters, and practical PCB guidance. It is intended to help engineers evaluate the converter, select an appropriate replacement, and integrate a compact, low-noise differential measurement channel without relying on raw catalog summaries alone.

ドロップイン代替品: MCP3422A1-E/MC — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MCP3422A1-E/MC (同一形状・フットプリント) — 相違点: Package, Differential Input Range, Digital Interface, Automotive Qualification, Resolution.

Microchip Technology
Package: 8-pin DFN with exposed pad, 2 x 3 mm
Digital Interface: I2C
Automotive Qualification: AEC-Q100 qualified
Microchip Technology
Package: 8-VFDFN exposed pad, 2 mm x 3 mm
Differential Input Range: Plus or minus 2.048 V
Resolution: 18 bit
Microchip Technology
Package: 8-pin DFN (2 mm x 3 mm)
Differential Input Range: -2.048 V to +2.048 V
Automotive Qualification: AEC-Q100 grade indicated for the A3 family
Microchip Technology
Package: 8-DFN, 2 mm x 3 mm
Digital Interface: I2C
Resolution: 18 bit
Microchip Technology
Digital Interface: I2C, 2-wire
Automotive Qualification: AEC-Q100

MCP3422A0-E/MC

✅ ドロップイン
Microchip Technology
📦 8-DFN (2 x 3 mm)
18 bit · 2 differential inputs · Sigma-delta · 1 · 3.75 samples per second · 4 samples per second · 2.048 V · ±2.048 V

価格はお問い合わせください

データシートを見る →

MCP3422A5-E/MC

✅ ドロップイン
Microchip Technology
📦 8-DFN (2 x 3 mm)
Sigma-delta analog-to-digital converter · 18 bit · 2 inputs · 3.75 samples/s · 2.7 V to 5.5 V · I2C · Onboard voltage reference · 8-DFN, 2 mm x 3 mm

価格はお問い合わせください

データシートを見る →

MCP3422A6-E/MC

✅ ドロップイン
Microchip Technology
📦 8-DFN (2 x 3 mm)
Up to 18 bits · 2 channels · Differential inputs · Delta-sigma ADC · 240 SPS · 2.048 V · ±2.048 V · 4.096 V

価格はお問い合わせください

データシートを見る →

MCP3422A2-E/MC

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 8-DFN (2 x 3 mm)
Delta-sigma ADC · 18 bit · 2 differential channels · Differential inputs · 2.7 V to 5.5 V · 2.048 V · Plus or minus 2.048 V · 240 samples per second

価格はお問い合わせください

データシートを見る →

MCP3422A3-E/MC

✅ ドロップイン ⚠️ 仕様未検証
Microchip Technology
📦 8-DFN (2 x 3 mm)
Delta-sigma ADC · 18 bits · 2 channels · Differential · I2C · 2.048 V · -2.048 V to +2.048 V · 2.7 V to 5.5 V

価格はお問い合わせください

データシートを見る →

MCP3422A1-E/MC 最大定格&電気的特性

Converter Type Delta-sigma ADC
分解能 18 bits
Number of Input Channels 2 channels
Input Type Differential
Maximum Conversion Rate 240 samples per second
Integrated Reference Voltage 2.048 V
Differential Input Range ±2.048 V
Minimum Supply Voltage 2.7 V
Maximum Supply Voltage 5.5 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature 125 °C
Digital Interface 2-wire I2C
パッケージ 8-DFN, 2 x 3 mm
実装タイプ Surface mount
Exposed Pad Present
Shipping Form Tape and reel
Automotive Classification Automotive for MCP3422A6-E/MC

MCP3422A1-E/MC 8-dfn, 2 x 3 mm ピン配置ガイド

MCP3422A1-E/MC (8-dfn, 2 x 3 mm パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

MCP3422A1-E/MC の 8-dfn, 2 x 3 mm パッケージピン配置図

詳細なピン配置データはありません: MCP3422A1-E/MC.

詳細は データシート をご参照ください。

主な用途

MCP3422A1-E/MC の用途: 6 件s: Industrial Pressure Sensor Acquisition, Precision Temperature Measurement, Battery-Powered Sensor Nodes, Current and Power Monitoring, Laboratory and Test Instruments, Process Control and Instrumentation.

🏭

Industrial Pressure Sensor Acquisition

The MCP3422A1-E/MC fits bridge-based pressure sensing because it provides two differential input channels, up to 18 bits of resolution, and a 240 SPS conversion rate for slowly varying process signals. The integrated 2.048 V reference supplies a stable excitation and conversion reference, while differential measurement helps suppress common-mode voltage present on long industrial sensor cables. Place the converter close to the sensor input, route the pair as a balanced analog channel, and use the manufacturer-recommended input filtering. Its I2C interface allows the readings to be transferred directly to an embedded controller without requiring a parallel data bus.

🌡️

Precision Temperature Measurement

The MCP3422A1-E/MC is suitable for RTD, thermocouple, or semiconductor temperature sensing when the measured value changes relatively slowly. Its 18-bit resolution preserves small temperature-derived voltage changes, and the two differential channels can monitor a sensing element or provide a reference measurement for drift compensation. The 240 SPS maximum rate is sufficient for thermal monitoring but should not be confused with a high-speed temperature waveform converter. A low-drift signal-conditioning path, shielded differential routing, and careful reference decoupling are necessary to preserve the converter's resolution in practical measurements.

🔋

Battery-Powered Sensor Nodes

The MCP3422A1-E/MC is appropriate for compact battery-powered sensor nodes that periodically report slowly changing measurements through I2C. Its 2.7 V to 5.5 V operating range supports common low-energy rails, while the 8-DFN 2 x 3 mm package preserves board area. The 18-bit resolution reduces the need for gain that could amplify offset and noise, and the integrated 2.048 V reference simplifies the measurement chain. Designers should still account for reference accuracy, analog input current, I2C pull-up consumption, and the converter's energy use during each acquisition cycle.

⚡

Current and Power Monitoring

The MCP3422A1-E/MC can measure low differential voltages produced by shunt resistors in current or power-monitoring circuits. Differential inputs suit a bipolar measurement around ground, while 18-bit resolution supports useful resolution when the shunt voltage occupies only a small part of the converter range. The two channels can monitor two power branches or provide simultaneous measurement of a load and a reference channel. Accurate results depend on an appropriate shunt value, input protection, Kelvin-style routing where practical, and analog filtering that does not introduce excessive settling delay at the selected conversion rate.

🔬

Laboratory and Test Instruments

The MCP3422A1-E/MC is useful in compact laboratory instruments that require accurate DC measurements but do not need waveform acquisition. Two differential channels can monitor an unknown input and a precision reference, supporting self-calibration or ratio measurements. The integrated 2.048 V reference simplifies instrument design, and the I2C interface allows a controller to retrieve results while minimizing interconnects. For bench equipment, isolate analog and digital grounds appropriately, keep input conditioning close to the package, and verify that the 240 SPS conversion rate supports the operator's measurement workflow.

🖥️

Process Control and Instrumentation

The MCP3422A1-E/MC can digitize low-level process variables in compact industrial instrumentation where panel space is constrained. Two differential inputs allow simultaneous acquisition of a process signal and a feedback or status channel, while the 18-bit delta-sigma architecture emphasizes resolution and noise performance. The I2C interface can connect the converter to a supervisory controller that performs scaling, filtering, and alarm logic. For reliable operation near motors, relays, or switching supplies, use a narrow analog trace path, continuous reference bypassing, an appropriate grounding strategy, and input protection selected for the actual transient environment.

What is the MCP3422A1-E/MC?
The MCP3422A1-E/MC is a dual-channel, 18-bit delta-sigma ADC with differential inputs, a 240 SPS conversion rate, an integrated 2.048 V reference, and an 8-DFN package. According to the Microchip Technology MCP3422 product page, it is intended for low-noise, high-accuracy measurement using a two-wire I2C interface. The compact 2 x 3 mm package suits space-constrained sensor and industrial measurement designs.
What is the operating voltage of MCP3422A1-E/MC?
The MCP3422A1-E/MC operates from 2.7 V to 5.5 V. The manufacturer comparison information identifies 2.7 V as the minimum supply voltage and 5.5 V as the maximum. This range permits use in both 3.3 V and 5 V systems, although the I2C logic levels, pull-up arrangement, and input limits must be matched to the host supply when designing the interface.
How many ADC channels and bits does MCP3422A1-E/MC have?
The MCP3422A1-E/MC provides two differential input channels and up to 18 bits of resolution. The Microchip Technology product page describes the MCP3422 as a two-channel, low-noise, high-accuracy delta-sigma converter. Its two channels allow paired differential measurements or monitoring of two related sensor outputs, while the 18-bit resolution supports fine measurement granularity.
Where can I download the MCP3422A1-E/MC datasheet PDF?
The official MCP3422A1-E/MC datasheet and product documentation can be accessed through the Microchip Technology MCP3422 product page at https://www.microchip.com/en-us/product/MCP3422. Use the manufacturer's datasheet for the final pin-description table, electrical characteristics, conversion timing, and recommended application circuit before committing the PCB layout.
Where is the MCP3422A1-E/MC pinout?
The MCP3422A1-E/MC pinout is published in the pin-description section of the Microchip Technology MCP3422 datasheet. The component uses an 8-DFN package with an exposed pad. Use the numbered package drawing and land-pattern recommendations in that document when assigning analog inputs, ground, supply, I2C signals, and the exposed-pad connection.
What is the difference between MCP3422A1-E/MC and MCP3422A0-E/MC?
The MCP3422A1-E/MC and MCP3422A0-E/MC belong to the same MCP3422 family and share the 18-bit, dual-channel, differential-input architecture with an integrated 2.048 V reference. Their device-specific operating options differ, so the A1 and A0 designations must be checked against the acquisition requirements in the family datasheet. Both use the same 8-DFN footprint, making the family suitable for footprint-compatible design reviews.
Is MCP3422A1-E/MC suitable for sensor measurement?
The MCP3422A1-E/MC is suitable for slowly changing sensor signals where high resolution, differential input measurement, and low noise matter more than high sampling speed. Its two differential channels support bridge-based or paired sensing, while the 18-bit resolution and integrated 2.048 V reference simplify precision acquisition. The 240 SPS rate should be checked against the required response time.
MCP3422A1-E/MC vs MCP3422A6-E/MC: which is better for automotive use?
The MCP3422A6-E/MC is the automotive-classified member identified in the MCP3422 comparison material, making it the more appropriate candidate when an automotive-qualified family option is required. The MCP3422A1-E/MC shares the 18-bit, dual-channel differential architecture and 8-DFN format, but its individual AEC-Q100 status is not stated in the product information used for this page. Confirm qualification and grade requirements before automotive release.
What is the best drop-in replacement for MCP3422A1-E/MC?
The MCP3422A0-E/MC is the directly identified parametric equivalent in the product cross-reference material and uses the same 8-DFN family footprint. Other same-family options include MCP3422A2-E/MC, MCP3422A3-E/MC, MCP3422A5-E/MC, and MCP3422A6-E/MC, subject to matching the required conversion option and qualification. Verify the datasheet ordering table before replacing any production device.
Can MCP3422A1-E/MC replace MCP3422A0-E/MC?
The MCP3422A1-E/MC can be considered for the same MCP3422 board position because both use the 8-DFN format and retain the same dual-channel, differential-input converter architecture. It is not automatically equivalent in every operating mode: the A0 and A1 device identifiers distinguish family options that must be checked against the required gain, acquisition behavior, and timing. Perform a complete datasheet comparison before substitution.
When should I choose MCP3422A1-E/MC over another ADC?
Choose the MCP3422A1-E/MC when the design needs 18-bit resolution, two differential inputs, a 240 SPS rate, an integrated 2.048 V reference, and a compact I2C-connected package. It is a stronger fit than a lower-resolution ADC when quantization error or sensor-system accuracy is important. It is less suitable for waveform capture, motor control, or other applications requiring substantially faster sampling.
How should MCP3422A1-E/MC be connected on a PCB?
Place the MCP3422A1-E/MC close to the sensor source, keep analog traces short, and route them away from switching nodes and high-current paths. Follow the manufacturer datasheet for input and reference capacitors, I2C pull-up placement, exposed-pad grounding, and copper coverage. A solid ground plane and carefully controlled analog return path are particularly important when measuring small differential signals.
What can replace MCP3422A1-E/MC?
MCP3422A0-E/MC, MCP3422A2-E/MC, MCP3422A3-E/MC, MCP3422A5-E/MC, and MCP3422A6-E/MC are same-brand family candidates for review because they share the MCP3422 architecture and 8-DFN package family. There is no verified cross-brand drop-in part for this device. Select the candidate that matches the required operating mode, temperature range, qualification, and acquisition timing.
Is MCP3422A1-E/MC the same as MCP3422A6-E/MC?
No. The MCP3422A1-E/MC and MCP3422A6-E/MC share the core MCP3422 family platform, including 18-bit delta-sigma conversion, dual differential channels, an integrated reference, and an 8-DFN package. The MCP3422A6-E/MC is identified as automotive, while the MCP3422A1-E/MC is not established as automotive-qualified in the product information used here. They are not interchangeable without a formal qualification review.
Where to buy MCP3422A1-E/MC online?
Use the Request a Quote form on this page to request MCP3422A1-E/MC availability, lead time, and the exact orderable MCP3422A1-E/MC configuration. The manufacturer product page is https://www.microchip.com/en-us/product/MCP3422 for technical documentation. Quote requests help confirm the 8-DFN package, quantity, and delivery requirements without relying on an ambiguous family-level listing.
What is the price of MCP3422A1-E/MC?
The current price for the exact MCP3422A1-E/MC should be requested through the Request a Quote form on this page. The form allows the quantity, package, and sourcing conditions to be stated directly, which is important because catalog pricing can vary with order quantity and availability. Use the product page and datasheet for technical details rather than relying on a family-level price.
What is the lead time and stock status for MCP3422A1-E/MC?
Request the current MCP3422A1-E/MC stock status, minimum order quantity, and lead time through the Request a Quote form on this page. The exact availability can change by package, quantity, and manufacturing allocation, so a listing-level indication is not a dependable production commitment. Include the required delivery schedule and annual usage when requesting the quotation.

エンジニアリング参考データ: MCP3422A1-E/MC — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MCP3422A1-E/MC for compact, high-resolution DC measurement with two differential inputs, an integrated 2.048 V reference, and a 240 SPS conversion rate. Select MCP3422A0-E/MC when its identified operating option better matches the acquisition sequence, and review MCP3422A2-E/MC or MCP3422A3-E/MC when a different same-family mode is required. MCP3422A5-E/MC is another same-package family candidate, while MCP3422A6-E/MC is the relevant option to evaluate for automotive classification. None of these choices supports high-speed waveform capture; select a faster ADC if that is the primary requirement. For every candidate, verify the ordering table, gain configuration, acquisition timing, I2C behavior, temperature grade, qualification status, and exposed-pad layout against the manufacturer datasheet before production substitution.

代替品との比較

パラメータ この製品 MCP3422A0-E/MC MCP3422A5-E/MC MCP3422A6-E/MC MCP3422A2-E/MC MCP3422A3-E/MC
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 8-DFN (2 x 3 mm) 8-DFN (2 x 3 mm), same package 8-DFN (2 x 3 mm), same package 8-DFN (2 x 3 mm), same package 8-DFN (2 x 3 mm), same package 8-DFN (2 x 3 mm), same package
Resolution 18 bits 18 bits 18 bits 18 bits 18 bits 18 bits
Input Channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels 2 differential channels
Conversion Rate 240 SPS 240 SPS 240 SPS 240 SPS 240 SPS 240 SPS
Integrated Reference 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V 2.048 V
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V 2.7 V to 5.5 V
Operating Temperature Range -40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C -40 °C to 125 °C
Digital Interface 2-wire I2C 2-wire I2C 2-wire I2C 2-wire I2C 2-wire I2C 2-wire I2C

主な差別化要因

  • High-resolution conversion in a compact package (vs MCP3422A0-E/MC)
  • Automotive-oriented family option (vs MCP3422A1-E/MC)
  • Compact two-channel differential measurement (vs MCP3422A2-E/MC)

設計ノート

Place the MCP3422A1-E/MC close to the sensor connector and route the two differential inputs as a compact pair. Use a continuous ground plane beneath the analog section, connect the exposed pad to ground according to the manufacturer land pattern, and place the recommended input, reference, and supply capacitors adjacent to their pins. Avoid routing the analog pair beneath switching-power nodes, relay contacts, or digital clock lines.

Do not treat 18-bit resolution as guaranteed system accuracy. Offset, reference drift, analog front-end noise, ADC noise, PCB leakage, and signal-conditioning errors can dominate the nominal resolution. Establish the required measurement uncertainty, characterize the complete channel at the intended temperature and bandwidth, and keep the input common-mode voltage within the operating range shown in the manufacturer datasheet.

Use differential pair routing with consistent geometry, minimize stubs, and ground the unused input appropriately when the application permits. Place analog filtering close to the ADC and verify that its settling behavior is compatible with the selected gain and conversion timing. I2C pull-up resistors can inject transient current into the power rail, so decouple the analog and digital supplies effectively and keep I2C routing away from the sensitive input nodes.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance declarations for the exact MCP3422A1-E/MC orderable part were not identified. MCP3422A6-E/MC is identified as automotive-classified, but that classification should not be assigned to MCP3422A1-E/MC.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MCP3422A1-E/MC datasheet MCP3422A1-E/MC specifications MCP3422A1-E/MC pinout MCP3422A1-E/MC datasheet pdf MCP3422A1-E/MC equivalent MCP3422A1-E/MC replacement MCP3422A1-E/MC cross reference MCP3422A1-E/MC price MCP3422A1-E/MC stock Microchip MCP3422A1-E/MC MCP3422A1-E/MC 8-DFN pinout MCP3422A1-E/MC vs MCP3422A6-E/MC

関連部品&用語

Microchip Technology MCP3422A1-E/MC MCP3422A0-E/MC MCP3422A2-E/MC MCP3422A3-E/MC MCP3422A5-E/MC MCP3422A6-E/MC analog-to-digital converter ADC delta-sigma ADC data converter integrated circuit semiconductor differential input low-noise measurement 18-bit resolution 240 SPS 2.048 V precision reference 2-wire I2C 8-DFN package QFN family surface-mount package industrial sensor acquisition process control automotive electronics
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示