Microchip Technology

MCP6232-E/P - Dual 1.8V Low-Power Rail-to-Rail Op Amp | Microchip

部品番号: MCP6232-E/P ✓ 生産中
1.8 V Vdss 20 µA typical per amplifier Id 8-pin PDIP Package
MOQ: 1 |

MCP6232-E/P 概要

The Microchip Technology MCP6232-E/P is a dual, general-purpose operational amplifier with rail-to-rail inputs and outputs, a 1.8 V minimum supply voltage, low typical quiescent current, and an extended-temperature 8-pin PDIP package. The device provides two amplifiers in one package, making it suitable for portable instrumentation, sensor interfaces, audio circuitry, industrial controls, and low-voltage signal-conditioning systems.

An operational amplifier is a voltage-gain amplifier intended for feedback-based analog signal conditioning. The MCP6231/1R/1U/2/4 family operates from a single supply as low as 1.8 V, combines a 300 kHz typical gain-bandwidth product with approximately 65 degrees of typical phase margin, and is designed for low-power signal processing. Rail-to-rail input and output operation improves usable signal range near the supply rails, although input and output common-mode limits still require careful review for each operating condition.

The MCP6232-E/P is specified as a dual amplifier in an 8-pin PDIP package. The exact ordering code also includes an extended-temperature qualification option, making the through-hole format convenient for prototypes, educational equipment, industrial controllers, and systems assembled with conventional through-hole components. Its rail-to-rail architecture is particularly useful when signals approach either supply rail and cannot be amplified reliably by a conventional amplifier with restricted common-mode range.

The manufacturer describes the MCP6231/1R/1U/2/4 family as combining wide bandwidth with low quiescent current. The family’s typical quiescent current is 20 µA per amplifier, while the MCP6232-E/P listing identifies a 1.8 V minimum operating voltage and approximately 200 kHz bandwidth for the selected orderable variant. These characteristics support compact, low-power designs where every milliampere of supply demand can shorten battery operating time or increase thermal stress.

Typical uses include low-voltage sensor conditioning, current measurement, battery-powered acquisition, audio input stages, transducer interfaces, and general-purpose analog control. In a sensor circuit, the amplifier can provide input buffering and gain referenced to the midpoint of a single supply. In audio applications, its dual configuration can process two channels while reducing package count.

The principal design consideration is the interaction between low supply voltage, rail-to-rail operation, output loading, and operating temperature. Confirm the input common-mode range, output swing, noise, offset, slew rate, and stability against the intended signal before releasing a production design. Place input and feedback components close to the device, maintain the recommended decoupling arrangement, and provide a clean return path to minimize offset and noise pickup.

ドロップイン代替品: MCP6232-E/P — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MCP6232-E/P (同一形状・フットプリント) — 相違点: Amplifier Type, Gain-Bandwidth Product, Number of Channels, Package, Phase Margin.

Microchip Technology
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 550 kHz typical
Number of Channels: 2 channels

MCP6231-E/P

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin PDIP
Same dual-amplifier 8-pin PDIP architecture and 1.8 V minimum supply; exact offset, noise, slew-rate, and temperature limits require comparison

📋 参考代替品(カタログ未掲載)

MCP6241-E/P

✅ ドロップイン ⚠️ 仕様未検証
📦 8-pin PDIP
Same dual-amplifier 8-pin PDIP architecture and low-voltage operation; bandwidth and exact electrical limits may differ

📋 参考代替品(カタログ未掲載)

MCP6242-E/P

✅ ドロップイン
Microchip Technology
📦 8-pin PDIP
2 channels · General-purpose operational amplifier · 550 kHz typical · 50 µA typical · 1.8 V to 5.5 V · Rail-to-rail · Rail-to-rail · 68° typical

価格はお問い合わせください

データシートを見る →

MCP6232-E/P 最大定格&電気的特性

Amplifier Type Operational amplifier
Number of Channels 2
Minimum Supply Voltage 1.8 V
静止電流 20 µA typical per amplifier
Gain-Bandwidth Product 200 kHz for MCP6232-E/P
Family Gain-Bandwidth Product 300 kHz typical
Phase Margin 65 degrees typical
Input Type Rail-to-rail
出力タイプ Rail-to-rail
パッケージ 8-pin PDIP
実装タイプ Through-hole
Temperature Grade Extended temperature
ピン数 8

MCP6232-E/P ピン構成

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
ピン 1 OUTA — Amplifier A output
ピン 2 INA- — Amplifier A inverting input
ピン 3 INA+ — Amplifier A non-inverting input
ピン 4 V- — Negative supply or ground connection
ピン 5 INB+ — Amplifier B non-inverting input
ピン 6 INB- — Amplifier B inverting input
ピン 7 OUTB — Amplifier B output
ピン 8 V+ — Positive supply connection

主な用途

MCP6232-E/P の用途: 6 件s: Battery-Powered Sensor Conditioning, Low-Voltage Audio Signal Processing, Industrial Current Measurement, Portable Data Acquisition, Transducer and Bridge Interfaces, Embedded Control Interfaces.

🔋

Battery-Powered Sensor Conditioning

The MCP6232-E/P fits battery-powered sensor interfaces because it operates from a single supply as low as 1.8 V and the related family draws only 20 µA typical quiescent current per amplifier. Rail-to-rail inputs help preserve signal information when a sensor operates near either supply rail, while rail-to-rail outputs allow the conditioned voltage to use much of the available range. Place each amplifier in a conventional non-inverting or inverting configuration, connect input and feedback components close to the device, and confirm the sensor’s common-mode range against the exact amplifier limits. Low supply voltage still requires careful grounding and decoupling because small offsets and noise can represent a significant fraction of the sensor’s full-scale output.

🎧

Low-Voltage Audio Signal Processing

The dual MCP6232-E/P can process left and right audio channels in a compact low-voltage system. Rail-to-rail inputs and outputs are useful when the signal occupies a large percentage of a 1.8 V or other low supply, while the approximately 200 kHz bandwidth listed for MCP6232-E/P is appropriate for many low-bandwidth audio and control paths rather than demanding full-range audio specifications. The two independent channels should share a stable supply and ground reference, and each feedback network must be sized for its intended gain. Confirm slew rate, output swing, noise, and stability with the manufacturer characteristic curves before accepting the design as a precision audio stage.

🏭

Industrial Current Measurement

MCP6232-E/P can amplify the small voltage produced by a low-side current shunt or sensor in an industrial measurement front end. A differential amplifier built from the dual device can subtract a reference from the sensor output, improving common-mode rejection and reducing component count. The 1.8 V minimum supply supports compact control systems, and the PDIP package simplifies through-hole assembly and maintenance. The shunt and amplifier must be checked together for common-mode range, input offset, bias-current error, output swing, and bandwidth. Add filtering at the amplifier input when switching transients or motor noise could exceed the electrical limits.

📱

Portable Data Acquisition

The MCP6232-E/P is suited to portable data-acquisition front ends that must amplify two low-level analog channels within a small power budget. Its single-supply operation from 1.8 V and 20 µA typical family quiescent current reduce the load imposed on batteries or energy-harvesting sources. Rail-to-rail input and output behavior improves usable range in systems where the sensor output does not sit near mid-supply. Use one amplifier channel per input, establish a suitable bias point for single-supply signals, and account for input bias current when using high-impedance sensors. Verify the selected gain against the approximately 200 kHz MCP6232-E/P bandwidth specification before increasing closed-loop gain.

🧩

Transducer and Bridge Interfaces

The two amplifiers in MCP6232-E/P can buffer strain, pressure, temperature, and resistive-bridge sensors in compact instrumentation. Rail-to-rail operation is useful at low supply voltages, and the dual configuration can reduce the number of packages compared with discrete single amplifiers. Bridge excitation and sensing amplifiers must be evaluated for offset, bias current, common-mode range, and noise rather than bandwidth alone; a high source impedance can also introduce errors that appear as output offset. Keep sensitive input traces short, return both channel grounds to the same low-noise reference, and place anti-alias or filtering components where their resistance and capacitance will not degrade the intended measurement accuracy.

🔧

Embedded Control Interfaces

MCP6232-E/P can condition analog control signals between sensors and an embedded controller, including pressure, position, or threshold signals in compact embedded equipment. The 1.8 V minimum operating voltage can simplify sharing a supply with low-voltage digital systems, while the PDIP package supports conventional through-hole prototypes and industrial controller assemblies. Use the amplifier to provide gain, level shifting, buffering, or active filtering, and ensure the controller’s ADC input remains within its input range. Component tolerances directly affect gain accuracy, so use suitable resistor networks and verify offset, common-mode behavior, output settling, and supply-noise rejection in the final board configuration.

おすすめ製品の概要

MCP6231-E/P Same-family dual low-power op-amp option 使用用途: Battery-Powered Sensor Conditioning, Low-Voltage Audio Signal Processing, Industrial Current Measurement, Portable Data Acquisition, Transducer and Bridge Interfaces, Embedded Control Interfaces MCP6242-E/P Microchip Technology 使用用途: Battery-Powered Sensor Conditioning, Low-Voltage Audio Signal Processing, Industrial Current Measurement, Portable Data Acquisition, Transducer and Bridge Interfaces, Embedded Control Interfaces
What is the MCP6232-E/P?
The MCP6232-E/P is a dual, 1.8 V minimum-supply operational amplifier with rail-to-rail inputs and outputs in an 8-pin PDIP package. According to the Microchip manufacturer product page, the related MCP6231/1R/1U/2/4 family has a 300 kHz typical gain-bandwidth product, approximately 65 degrees of typical phase margin, and 20 µA typical quiescent current per amplifier. Two independent amplifiers in one package suit low-voltage buffering, sensor conditioning, and dual-channel signal processing.
What are the key specifications of MCP6232-E/P that engineers should know?
The MCP6232-E/P combines two operational amplifiers, a 1.8 V minimum supply voltage, rail-to-rail inputs and outputs, and an 8-pin PDIP package in one orderable device. The Microchip manufacturer page identifies 300 kHz typical gain-bandwidth product, approximately 65 degrees of typical phase margin, and 20 µA typical quiescent current for the broader family. The distributor specification for this exact orderable lists approximately 200 kHz bandwidth, so the exact MCP6232-E/P rating should govern final design calculations.
Can MCP6232-E/P be used with a single 1.8 V supply?
Yes, the MCP6232-E/P is designed to operate from a single supply as low as 1.8 V. Microchip describes rail-to-rail inputs and outputs, which improves signal swing near the supply rails in low-voltage systems. The circuit must still provide adequate bypass capacitance and leave valid headroom for the selected operating point. Use the manufacturer’s input common-mode and output-swing graphs when designing sensor inputs or outputs that approach 0 V or 1.8 V.
What is the gain-bandwidth product of MCP6232-E/P?
The MCP6232-E/P listing specifies approximately 200 kHz bandwidth, while Microchip describes 300 kHz typical gain-bandwidth product for the related MCP6231/1R/1U/2/4 family. Because these statements refer to different scopes, use the exact MCP6232-E/P datasheet curve for closed-loop gain planning and stability analysis. A 200 kHz gain-bandwidth product supports low-to-moderate closed-loop gains, while the exact permissible gain at a given frequency depends on phase margin and capacitive loading.
Where can I download the MCP6232-E/P datasheet PDF?
The official MCP6232-E/P documentation starts at the Microchip manufacturer product page, with dedicated datasheet and octopart document links also available. The manufacturer datasheet is the controlling source for pin functions, electrical limits, recommended operating conditions, and characteristic curves. Start with the Microchip MCP6232 product page, select the MCP6232-E/P ordering table, and download the associated manufacturer PDF before finalizing a PCB or production BOM.
Where can I find the MCP6232-E/P pinout?
The MCP6232-E/P uses an 8-pin PDIP arrangement with two complete operational amplifiers. The standard dual-op-amp pin sequence is pin 1 OUTA, pin 2 INA−, pin 3 INA+, pin 4 V−, pin 5 INB+, pin 6 INB−, pin 7 OUTB, and pin 8 V+. Cross-check those functions against the pin-description table in the Microchip manufacturer datasheet before assigning PCB tracks or applying a socket.
Where can I buy MCP6232-E/P online?
The MCP6232-E/P can be requested through the “Request a Quote” form on this product page. The form is the appropriate route for current unit availability, volume pricing, and lead-time confirmation because these commercial terms can change. Record the exact MCP6232-E/P ordering code when submitting the request so the manufacturer’s 8-pin PDIP configuration and extended-temperature grade are not confused with another package variant.
What is the price of MCP6232-E/P?
Current pricing for MCP6232-E/P should be obtained through the “Request a Quote” form on this page. The form can provide a price tied to the requested quantity, purchasing schedule, and delivery destination. Use the complete MCP6232-E/P MPN in the request because other MCP6232 package and temperature codes are distinct orderable devices with different supply arrangements.
What is the lead time for MCP6232-E/P?
The current lead time for MCP6232-E/P should be confirmed through the “Request a Quote” form on this page. Lead time can vary with order quantity, manufacturing status, and inventory conditions, so an older market listing is not a reliable commitment. State the required quantity, production schedule, and approved manufacturer or distributor channel in the request to obtain an actionable delivery quotation.
Is MCP6232-E/P in stock?
Use the “Request a Quote” form on this page to request current MCP6232-E/P availability and a confirmed delivery commitment. The orderable includes an 8-pin PDIP package and extended-temperature grade, so inventory must be checked against the exact suffix rather than a generic MCP6232 family listing. Include the required quantity and target delivery date when requesting a stock and lead-time response.
When should I choose MCP6232-E/P instead of MCP6242-E/P?
Choose MCP6232-E/P when a low-power, dual, rail-to-rail amplifier in an 8-pin PDIP package is sufficient for the required bandwidth and precision. Consider MCP6242-E/P when the design needs the higher bandwidth associated with that family member. Both belong to the same Microchip family and can share the familiar dual-amplifier PDIP pin arrangement, but the exact datasheet limits must be compared before substitution.
What is the difference between MCP6232-E/P and MCP6242-E/P?
The principal documented difference is the amplifier family’s performance class: MCP6232-E/P is the lower-bandwidth option, while MCP6242-E/P provides higher bandwidth for applications requiring faster response. Microchip lists MCP6232-E/P as an extended-temperature dual amplifier in an 8-pin PDIP package with approximately 200 kHz bandwidth. MCP6242-E/P is also compared as a drop-in family alternative, but its exact offset, noise, slew-rate, and supply limits should be checked in its manufacturer documentation.
Is MCP6232-E/P suitable for low-voltage sensor interfaces?
Yes, MCP6232-E/P is suitable for many low-voltage sensor interfaces because it operates from a single supply as low as 1.8 V and has rail-to-rail inputs and outputs. Its 20 µA typical family quiescent current also supports power-conscious acquisition. The sensor’s output range must remain within the amplifier’s common-mode limits, and source resistance, noise, offset, and capacitive loading should be evaluated for the required measurement accuracy.
What can replace MCP6232-E/P?
The closest documented replacements are pin-compatible members of the Microchip MCP6231/1R/1U/2/4 family, including the dual PDIP MCP6231-E/P, MCP6241-E/P, and MCP6242-E/P. Each candidate must retain two amplifiers, the same 8-pin PDIP footprint, an acceptable supply range, and adequate bandwidth and accuracy for the design. Treat the family relationship as the starting point, then verify the exact candidate’s manufacturer datasheet before releasing a drop-in substitution.
Is MCP6232-E/P the same as MCP6231-E/P?
MCP6232-E/P and MCP6231-E/P are closely related dual operational amplifiers in the same Microchip family and share the same 8-pin PDIP architecture. MCP6231-E/P may differ in specific electrical limits or orderable temperature treatment, even when both are sold as dual amplifiers. Verify maximum supply voltage, input and output range, offset, bias current, noise, slew rate, and temperature ratings in the manufacturer documentation for the exact suffix before treating them as interchangeable.
What is the best Microchip equivalent for MCP6232-E/P?
MCP6231-E/P is the most direct Microchip family equivalent to MCP6232-E/P because both provide two amplifiers in an 8-pin PDIP package and operate from low single-supply voltages. MCP6242-E/P is another same-package family option when additional bandwidth is useful. Neither should be approved solely from family membership: compare the exact ordering code’s input common-mode range, offset, noise, output swing, quiescent current, and temperature grade before substitution.

エンジニアリング参考データ: MCP6232-E/P — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MCP6232-E/P for a dual, low-voltage, rail-to-rail amplifier in an 8-pin PDIP package when approximately 200 kHz bandwidth, low quiescent current, and extended-temperature ordering are sufficient. MCP6231-E/P is the closest same-family alternative when its exact electrical ratings meet the design and the broader family’s 300 kHz bandwidth is useful. MCP6241-E/P can be considered when its exact performance limits provide a functional benefit, but its offset, noise, slew rate, and temperature limits require direct comparison. MCP6242-E/P is preferable when the higher-bandwidth family performance is valuable, such as for faster settling, while retaining the same dual-amplifier PDIP architecture. For every candidate, verify the exact pin description, supply limits, common-mode range, output swing, offset, input bias current, noise, stability, and temperature grade before approving a drop-in substitution.

代替品との比較

パラメータ この製品 MCP6231-E/P MCP6241-E/P MCP6242-E/P
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Number of Amplifiers 2 2 2 2
Minimum Supply Voltage 1.8 V 1.8 V 1.8 V 1.8 V
Input and Output Range Rail-to-rail Rail-to-rail Rail-to-rail Rail-to-rail
Mounting Type Through-hole Through-hole Through-hole Through-hole

主な差別化要因

  • Two low-power amplifiers in one through-hole package (vs MCP6231-E/P)
  • Documented exact-orderable bandwidth (vs MCP6242-E/P)
  • Low-voltage rail-to-rail operation (vs MCP6241-E/P)

設計ノート

Decouple the supply pins at the device with a short, low-inductance connection to the system ground plane. Place the principal bypass capacitor immediately across the IC supply terminals and retain any additional capacitor recommended by the manufacturer for high-frequency noise control. Avoid placing sensitive inputs next to the supply-return path. Because the related family draws 20 µA typical quiescent current per amplifier, supply demand will often be dominated by the load rather than the op-amp itself.

Keep each input pin, feedback resistor, and compensation component close to its associated amplifier pin. Route outputs away from high-impedance input and feedback nodes to reduce parasitic coupling, and use a continuous ground reference rather than a narrow return path. For single-supply designs, establish the signal midpoint at a quiet, well-decoupled reference. Check the physical orientation against the numbered 8-pin PDIP pinout before soldering.

Do not treat rail-to-rail input and output wording as permission to exceed the electrical limits at elevated temperature, high output load, or low supply voltage. Review the exact manufacturer common-mode, output-swing, offset, slew-rate, and supply-maximum curves. Also avoid assuming that two amplifiers sharing a package can operate from split supplies without checking the permitted total supply voltage and ground configuration.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The orderable is identified as an extended-temperature dual operational amplifier in an 8-pin PDIP package. Specific environmental and material-compliance declarations require confirmation from the manufacturer product documentation.

関連検索

MCP6232-E/P datasheet MCP6232-E/P pinout MCP6232-E/P datasheet pdf MCP6232-E/P equivalent MCP6232-E/P replacement MCP6232-E/P cross reference MCP6232-E/P vs MCP6242-E/P MCP6232-E/P 8-PDIP amplifier MCP6232-E/P 1.8V rail-to-rail MCP6232-E/P sensor interface MCP6232-E/P price MCP6232-E/P stock Microchip MCP6232-E/P

関連部品&用語

Microchip Technology MCP6232-E/P MCP6231-E/P MCP6241-E/P MCP6242-E/P operational amplifier op amp dual amplifier rail-to-rail input rail-to-rail output gain-bandwidth product phase margin quiescent current common-mode range input offset voltage input bias current 1.8 V power supply 8-pin PDIP PDIP package through-hole package sensor conditioning industrial control portable data acquisition low-voltage signal processing
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示