MK22FN512CAP12 - 512KB Flash Cortex-M4 MCU | NXP K22F | WLCSP-80
部品番号: MK22FN512CAP12 ✓ 生産中MK22FN512CAP12 概要
Background Knowledge: A microcontroller (MCU) is a single-chip computer containing a CPU core, program memory (Flash), data memory (SRAM), and integrated peripherals such as ADCs, communication interfaces, and timers. The Cortex-M4 core belongs to the ARMv7-M architecture family (CPU -> ARM Cortex-M -> Cortex-M4 -> Kinetis K22F) and adds a single-precision floating-point unit and DSP instructions for signal-processing workloads. Kinetis K-series parts sit within NXP's broader Kinetis microcontroller portfolio, designed for industrial, consumer, and medical embedded systems.
Key features include 512 KB of embedded Flash, 128 KB of SRAM, 120 MHz core with FPU, USB 2.0 full-speed device/host/OTG with on-chip PHY, a 12-bit/16-bit configurable ADC, multiple serial interfaces (UART, SPI, I2C), low-power run/wait/STOP modes, and an operating voltage range of 1.71 V to 3.6 V. The 80-pin WLCSP package is the smallest-footprint option for the K22F family, intended for space-constrained designs.
Technical depth: The K22F integrates a Cortex-M4 core with DSP extensions and an FPU, a high-speed memory-to-memory bus, and a peripheral crossbar switch that allows flexible pin-muxing. Security features include a hardware cryptographic acceleration unit (CAU) and a true random number generator (TRNG) shared across the K2x family. The on-chip USB PHY eliminates the external transceiver, reducing BOM cost for USB-enabled designs.
Typical applications include USB peripherals, industrial sensor nodes, portable medical devices, and consumer wearables. The small WLCSP footprint is well suited to PCB-real-estate-limited products, while the 120 MHz CPU and 512 KB Flash support protocols such as USB HID/CDC, BLE host stacks, and modest DSP workloads.
Design consideration: When migrating between K22F package options (LQFP/WLCSP), verify pin-mux mapping and supply-pin count differences; WLCSP requires careful PCB pad design and under-fill consideration for harsh environments.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: MK22FN512CAP12 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MK22FN512CAP12R
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MK22FN512CAP12 最大定格＆電気的特性
| Core | ARM Cortex-M4 with FPU |
| CPU Speed | 120 MHz |
| Flash Memory | 512 KB |
| SRAM | 128 KB |
| Operating Voltage | 1.71 V to 3.6 V |
| 動作温度 | -40 C to +85 C |
| パッケージ | 80-WLCSP (4.13 x 3.56 mm) |
| USB | USB 2.0 Full-Speed with on-chip PHY (Device/Host/OTG) |
| ADC | 12-bit / 16-bit configurable |
| Timers | Multiple FTM, LPTMR, PIT, RTC |
| Communication | UART, SPI, I2C, I2S |
| 実装タイプ | Surface Mount |
| RoHS ステータス | Compliant |
| Cryptography | CAU + TRNG (per K2x family) |
| Series | Kinetis K22F |
MK22FN512CAP12 80-wlcsp (4.13 x 3.56 mm) ピン配置ガイド
MK22FN512CAP12 (80-wlcsp (4.13 x 3.56 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MK22FN512CAP12.
詳細は データシート をご参照ください。
主な用途
MK22FN512CAP12 の用途: 6 件s: USB HID / CDC Peripherals, Industrial Sensor Hubs, Portable Medical Devices, Consumer Wearables, Smart Home / IoT Edge Nodes, HMI / Display Controllers.
USB HID / CDC Peripherals
The MK22FN512CAP12's on-chip USB 2.0 full-speed PHY removes the need for an external transceiver, making it a natural fit for USB HID keyboards, mice, CDC virtual COM ports, and custom HID devices. The 120 MHz Cortex-M4 with FPU handles USB stack plus application logic within the 512 KB Flash budget, while the 128 KB SRAM comfortably buffers USB packets and descriptors. Place a 48 MHz crystal reference (or use the internal FLL trimmed to USB accuracy) and route D+/D- as a 90-ohm differential pair; the on-chip PHY handles termination internally. Compared with a discrete USB transceiver + lower-end MCU solution, the CAP12 reduces BOM by 4 to 6 components and shrinks PCB area, while preserving enough compute headroom for capacitive-touch or LED-animation firmware alongside the USB stack.
おすすめ
Industrial Sensor Hubs
The MK22FN512CAP12 supports multi-sensor industrial hub designs through its 12-bit/16-bit configurable ADC, multiple UART/SPI/I2C ports, and the 120 MHz Cortex-M4 capable of running modest sensor-fusion DSP routines. Operating from 1.71 V to 3.6 V across -40 C to +85 C, it meets industrial temperature specs directly. Use the FTM timers for precise PWM-driven sensor excitation and the low-power run/wait modes for battery-backed remote nodes. The 512 KB Flash accommodates vendor-specific sensor calibration tables and over-the-air update bootloaders. Compared to lower-spec Cortex-M0+ MCUs at the same price, the CAP12's FPU enables single-precision filter math for sensor fusion without resorting to fixed-point approximations.
おすすめ
Portable Medical Devices
The MK22FN512CAP12's low-power run, wait, and STOP modes support battery-powered medical wearables such as pulse oximeters, glucose meters, and portable ECG patches. The Cortex-M4 FPU performs on-device DSP for heart-rate detection or signal averaging without off-loading to an external DSP, while 512 KB Flash fits modest FDA-class firmware plus a secure bootloader. Operating voltage down to 1.71 V supports single-cell Li-ion designs down to cutoff. The hardware CAU + TRNG accelerators can accelerate patient-data encryption when paired with an external secure element. Compared with Cortex-M0 medical MCUs, the CAP12 delivers roughly 4x the DSP throughput per MHz, enabling more sophisticated on-device analytics at similar power budgets.
おすすめ
Consumer Wearables
The MK22FN512CAP12 in its compact WLCSP-80 package fits inside small consumer wearables where PCB area is critical - smart watches, fitness bands, and hearables. The on-chip USB PHY simplifies charging-crate USB communication, and the multiple I2S interfaces support digital microphone arrays or audio DAC paths. The 120 MHz Cortex-M4 with FPU runs lightweight voice-trigger or motion-classification algorithms in firmware, while the 128 KB SRAM holds small neural-network weights for on-wrist gesture recognition. Compared to bare Cortex-M0 wearables MCUs, the CAP12's FPU delivers the headroom needed for floating-point DSP without a separate audio processor.
おすすめ
Smart Home / IoT Edge Nodes
The MK22FN512CAP12 anchors IoT edge nodes such as smart thermostats, BLE-to-WiFi bridges, and home-automation hubs by combining USB host/device flexibility with low-power modes for wall-powered or battery-backed operation. The 512 KB Flash accommodates TLS client stacks plus Matter/Thread/Zigbee protocol libraries, and the 128 KB SRAM supports concurrent TLS handshakes and application logic. The Cortex-M4 with FPU computes local analytics (motion classification, occupancy detection) before forwarding events upstream, reducing cloud bandwidth. Compared to Cortex-M0 IoT MCUs, the CAP12's FPU and larger SRAM enable richer on-device processing and smoother multi-protocol coexistence.
おすすめ
HMI / Display Controllers
The MK22FN512CAP12 supports small HMI panels and display controllers for industrial controls, appliances, and point-of-sale terminals, using SPI or 8/16-bit parallel interfaces to drive TFT LCDs and OLED modules. The 120 MHz Cortex-M4 with FPU executes graphics primitives, asset blitting, and touch coordinate processing without an external GPU. The 512 KB Flash fits framebuffer fonts, icons, and multilingual strings for global deployments. The on-chip USB PHY enables touchscreen calibration over USB, simplifying factory test. Compared to fixed-function LCD controllers, the CAP12 delivers a programmable platform that field-updates UI assets without external memory.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MK22FN512CAP12 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MK22FN512CAP12R | MK22FN512VDC12 | MK22FN512VLH12 |
|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-WLCSP (4.13x3.56 mm) | 80-WLCSP (4.13x3.56 mm) - same | 121-XFBGA (8x8) - different | 80-LQFP - different |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| CPU Speed | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB |
| USB | USB 2.0 Full-Speed with on-chip PHY | USB 2.0 Full-Speed with on-chip PHY | USB 2.0 Full-Speed with on-chip PHY | USB 2.0 Full-Speed with on-chip PHY |
| Operating Voltage | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V | 1.71 V to 3.6 V |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
主な差別化要因
- Smallest-footprint K22F package option （vs MK22FN512VLH12 (LQFP-80))
- On-chip USB 2.0 PHY （vs Cortex-M0+ MCUs with external USB transceiver)
- Cortex-M4 with FPU at this price tier （vs Same-priced Cortex-M0+ MCUs)
設計ノート
The MK22FN512CAP12 integrates a 1.2 V internal regulator from the external VDD rail. Decouple VDD/VSS pairs with 100 nF ceramic capacitors placed within 2 mm of each supply pin, plus a bulk 4.7 uF tantalum or ceramic at the regulator input. Run the K22 in low-power STOP mode with the on-chip LVD enabled to safeguard brownout recovery when battery voltage sags below 1.8 V.
WLCSP-80 assembly demands precise PCB land pattern design per NXP's package outline drawing; recommend NSMD pads with a 0.4 mm pitch and solder mask defined openings. Use no-clean flux and reflow profile compliant with the package's MSL rating (verify MSL from NXP datasheet - datasheet field [DATA_NEEDED]). For hand prototyping, prefer the LQFP-80 MK22FN512VLH12 variant which exposes identical signals on a 0.5 mm pitch package.
Do not assume all K22F package variants share identical pin-mux assignments across the WLCSP-80, LQFP-80, and XFBGA-121 footprints. While the silicon die is identical, pinout maps differ between packages and firmware must reference the correct PORT/PIN macros for the chosen package. Always verify against the package-specific pinout table in the NXP K22 datasheet before board bring-up.
Route the USB D+/D- pair as a 90-ohm differential with matched length and continuous reference plane for the on-chip USB PHY to meet USB 2.0 full-speed signal integrity. Place the 48 MHz crystal or external clock source within 5 mm of the XTAL pins to minimize jitter. Keep high-frequency switching signals away from the analog reference pins to preserve ADC accuracy.
コンプライアンス情報
RoHS compliant per NXP product page. Not AEC-Q100 qualified - for automotive applications choose an AEC-Q100 qualified K22F variant.
