MKL13Z64VLK4 - 48MHz Cortex-M0+ 64KB MCU | NXP
部品番号: MKL13Z64VLK4 ✓ 生産中MKL13Z64VLK4 概要
A microcontroller is an integrated circuit that combines a processor core, program memory, data memory, and peripherals on one semiconductor die. The MKL13Z64VLK4 belongs to the NXP Kinetis KL1x family, which extends the Kinetis KL0x portfolio with additional memory, communications, and analog peripheral options. Its Arm Cortex-M0+ core uses a compact instruction set intended for cost-sensitive embedded control, while the 48 MHz operating frequency provides adequate performance for sensor conditioning, communications, and real-time control tasks.
The device provides 64 KB of flash for program storage and 8 KB of SRAM for working data. Its 70 general-purpose I/O pins support integration with displays, sensors, actuators, communication transceivers, and industrial interfaces. The manufacturer describes the Kinetis KL1x family as an ultra-low-power general-purpose MCU platform, making it suitable for designs where average current consumption is as important as processing capability.
The 80-pin LQFP package exposes substantially more I/O than smaller microcontroller packages, reducing the need for external I/O expanders in mixed-signal systems. NXP positions the KL1x family as compatible with other Kinetis KL-series devices, which can simplify firmware and peripheral-driver reuse during product migrations. The MKL13Z64VLK4 also belongs to a broader ecosystem that includes Kinetis KL2x, KL3x, and KL4x microcontrollers.
Typical uses include industrial sensor nodes, building automation modules, portable measurement equipment, low-power data loggers, and USB-connected portable products. A 16-bit ADC resolution is specified for the family variant, supporting analog measurements that require more precision than a basic 8-bit or 10-bit input. The combination of 8 KB SRAM, 70 I/O, and 48 MHz processing supports moderate real-time workloads without an external processor.
PCB design should preserve clean analog and digital power distribution, especially when the MCU drives sensors or communication modules. Place decoupling capacitors close to the supply pins, route high-current outputs away from sensitive analog inputs, and use continuous ground-plane connectivity beneath the LQFP footprint. Confirm the exact pin assignments and alternate-function multiplexing in the manufacturer datasheet before finalizing a board layout.
This product overview combines the manufacturer device positioning with package, memory, core, frequency, and I/O characteristics, then adds selection guidance, application context, and design-focused considerations. The resulting engineering view helps distinguish MKL13Z64VLK4 from parts with different core types, memory capacities, package dimensions, or operating-temperature grades.
ドロップイン代替品: MKL13Z64VLK4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MKL13Z64VLK4 (同一形状・フットプリント) — 相違点: Package, Mounting Type, Core Architecture, Product Type.
MKL13Z64VLH4
✅ ドロップイン価格はお問い合わせください
データシートを見る →MKL14Z64VLK4
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MKL13Z64VLK4 最大定格&電気的特性
| Product Type | 32-bit ARM Cortex-M0+ Microcontroller |
| Product Family | Kinetis KL13 |
| Processor Core | Arm Cortex-M0+ |
| 最大クロック周波数 | 48 MHz |
| データバス幅 | 32 bit |
| Flash Memory | 64 KB (64K x 8) |
| SRAM | 8 KB |
| ADC Resolution | 16 bit |
| Number of I/O | 70 |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +105 °C |
| パッケージ | 80-LQFP, 12 mm x 12 mm |
| 実装タイプ | Surface Mount |
| Core Architecture | ARM 32-bit RISC |
| Program Memory Type | Flash |
| USB Device Support | Supported by the MKL13Z64VLH4 family variant |
| ライフサイクル状態 | Active |
MKL13Z64VLK4 80-lqfp, 12 mm x 12 mm ピン配置ガイド
MKL13Z64VLK4 (80-lqfp, 12 mm x 12 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MKL13Z64VLK4.
詳細は データシート をご参照ください。
主な用途
MKL13Z64VLK4 の用途: 6 件s: Industrial Sensor and Condition Monitoring, Building Automation Controller, Portable Data Logger, USB-Connected Embedded Device, Low-Power Environmental Sensor Hub, Motor and Actuator Control Module.
Industrial Sensor and Condition Monitoring
The MKL13Z64VLK4 fits industrial sensor and condition-monitoring nodes because its 48 MHz Arm Cortex-M0+ core can sample and process multiple inputs while 70 I/O provides connections for sensors, status indicators, and communications. The documented 16-bit ADC resolution supports measurements that benefit from greater precision than an 8-bit conversion. Its -40 °C to +105 °C operating range also supports industrial temperature environments. Place the MCU close to the analog front end, keep sensitive traces away from switching nodes, and follow the manufacturer pin and decoupling guidance to preserve measurement quality.
おすすめ
Building Automation Controller
The MKL13Z64VLK4 is suitable for a building automation controller that must connect sensors, actuators, communication transceivers, and local indicators. Its 70 I/O reduces the likelihood of needing a separate I/O expander, while 64 KB flash provides room for protocol handlers and application logic. The 48 MHz Cortex-M0+ core supports responsive control tasks without a higher-performance core. Because power management systems may place the controller near long wiring and switching loads, use a clean ground plane, controlled digital return paths, and local bulk decoupling around the MCU supply pins.
おすすめ
Portable Data Logger
The MKL13Z64VLK4 supports portable data-logging products by combining 64 KB flash, 8 KB SRAM, and a 48 MHz Cortex-M0+ core in an 80-LQFP package. The processor can buffer measurements, coordinate sensor acquisition, and manage a serial data link while the Kinetis KL1x low-power focus helps preserve battery life. Choose a low-leakage regulator for the MCU rail, disable unused peripherals before storage, and define safe flash-write wear limits for repeated logging cycles. Validate the final sleep-mode current with the actual sensor and communications load.
おすすめ
USB-Connected Embedded Device
The MKL13Z64VLK4 can support a USB-connected embedded device when its USB-related peripheral configuration is confirmed in the manufacturer documentation. Its 48 MHz Cortex-M0+ core, 8 KB SRAM, and 70 I/O are sufficient for control tasks, data buffering, and multiple external connections. The related 80-LQFP package keeps the design compatible with available development-board layouts, but production routing must follow the exact device pin table. Keep USB differential routing short and controlled, provide the required clock configuration, and isolate analog sections from connector transients.
おすすめ
Low-Power Environmental Sensor Hub
The MKL13Z64VLK4 fits an environmental sensor hub that gathers temperature, humidity, air-quality, or occupancy measurements and forwards them through a low-power serial link. Its 16-bit ADC resolution benefits analog sensor conditioning, while 70 I/O accommodates sensor enables, interrupts, indicators, and communications. The Kinetis KL1x family's ultra-low-power positioning makes the MCU appropriate for battery-operated nodes, provided the designer selects the appropriate sleep mode and disables unused blocks. Use the manufacturer's power-measurement modes to compare run-time and standby-current requirements.
おすすめ
Motor and Actuator Control Module
The MKL13Z64VLK4 can serve as the supervisory controller in an actuator module where timing, diagnostics, and multiple digital connections matter. The 48 MHz Cortex-M0+ core executes control logic, 70 I/O supports encoder, limit, fault, and driver-control signals, and 64 KB flash accommodates application code and diagnostics. The MCU should not directly drive high-current motor windings; use suitable power-stage and protection components. Keep switching-node copper and high-current returns away from ADC and reference circuitry, and validate timing margins at the operating temperature extremes.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MKL13Z64VLK4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MKL13Z64VLH4 | MKL14Z64VLK4 |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) | 80-LQFP (12x12 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum Clock Frequency | 48 MHz | 48 MHz | 48 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Product Family | Kinetis KL13 | Kinetis KL13 | Kinetis KL14 |
主な差別化要因
- High I/O count for a compact general-purpose MCU (vs MKL14Z64VLK4)
- Documented 16-bit ADC resolution (vs MKL13Z64VLH4)
- 64 KB flash and 8 KB SRAM in an 80-LQFP device (vs MKL14Z64VLK4)
- Industrial temperature capability (vs MKL13Z64VLH4)
設計ノート
Treat the 80-LQFP footprint as a mixed-signal and high-pin-count layout. Place all required decoupling capacitors adjacent to their corresponding power pins, provide a continuous ground plane, and route sensitive analog inputs away from digital outputs and external connector-return paths. Pin 1 orientation and every signal assignment must follow the package drawing in the NXP datasheet because the 70 I/O do not all have interchangeable functions.
Use the exact MKL13Z64VLK4 pin-description table to assign boot, debug, reset, clock, and communication functions before committing the schematic. The 12 mm by 12 mm LQFP offers generous escape space, but incorrect alternate-function multiplexing can still prevent a valid design. Keep configuration straps and debug interfaces accessible for programming, and verify the pin direction and analog attributes for every analog channel.
The NXP product information identifies the Kinetis KL1x family as ultra-low-power, but system battery life depends on the selected processor mode, clock frequency, and enabled peripherals. Review active, idle, sleep, and shutdown current in the manufacturer datasheet under the intended temperature and voltage conditions. Disable unused blocks, avoid excessive polling, and account for sensor and communication loads when calculating runtime.
Do not assume that another 80-LQFP Kinetis device is automatically interchangeable even when core frequency and flash size match. The MKL13Z64VLH4 and MKL14Z64VLK4 provide useful comparison points, but peripheral availability, alternate functions, temperature grade, ordering suffix, and pin multiplexing must be checked. Confirm every migrated signal and the complete pin list before using a substitute in production.
コンプライアンス情報
The manufacturer product page identifies the device as active but does not state the requested compliance attributes in the available product summary. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals requirements using the current manufacturer product documentation.