MSP430F2619TPN - 16MHz 120KB Flash MCU | Texas Instruments
部品番号: MSP430F2619TPN ✓ 生産中MSP430F2619TPN 概要
A microcontroller is a programmable integrated circuit that combines a processor core, memory, and peripherals on one semiconductor device. The MSP430 family is based on a 16-bit RISC architecture and is commonly used for low-power embedded control. Its hierarchy includes MCU, embedded processor, mixed-signal microcontroller, and semiconductor, allowing the MSP430F2619TPN to serve both computation and analog signal-acquisition roles.
Key characteristics include a 16 MHz maximum clock, 120 KB flash memory, 4 KB SRAM, AES support, a 12-bit ADC, and a comparator. The integrated serial interfaces support UART, SPI, and I2C communication, while DMA can transfer data with reduced processor intervention. These features make the device suitable for industrial instrumentation, data acquisition, communications equipment, and embedded control products.
The MSP430F2619TPN belongs to TI's MSP430F2xx mixed-signal microcontroller family and provides a compact combination of low-power processing and mixed-signal peripherals. Its flash memory supports in-system firmware storage, while SRAM provides working memory for control loops and protocol handling. The 12-bit ADC offers 4096 possible digital codes for analog measurements, and the comparator can support threshold-based signal detection.
Typical applications include industrial sensor interfaces, low-power data loggers, building-control equipment, communications modules, portable measurement instruments, and embedded systems requiring multiple serial interfaces. Engineers can use the UART for host communication, SPI for faster peripheral data transfer, and I2C for low-pin-count sensors or memories. AES support is useful where firmware or stored data requires hardware-assisted encryption.
The 80-LQFP package exposes 64 I/O ports according to the listed device information, making it practical for designs requiring several digital interfaces and analog inputs. Board design should preserve adequate power and decoupling layout, route sensitive analog signals away from switching nodes, and follow the manufacturer's pin-description and application guidance. The MSP430F2xx Family User's Guide is the appropriate reference for peripheral operation and software configuration.
ドロップイン代替品: MSP430F2619TPN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F2619TPN (同一形状・フットプリント) — 相違点: Flash Memory, Package, SRAM, Direct Memory Access, Hardware Multiplier.
MSP430F2618TPN
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2617TPN
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2616TPN
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2619TPN 最大定格&電気的特性
| Product Type | 16-bit mixed-signal microcontroller |
| Processor Architecture | MSP430 CPU16 |
| Maximum Clock Speed | 16 MHz |
| Flash Memory | 120 KB |
| Flash Organization | 120K x 8 + 256 B |
| SRAM | 4 KB |
| ADC Resolution | 12 bit |
| ADC Code Range | 0 to 4095 codes |
| Integrated Comparator | Yes |
| AES Hardware | Yes |
| Serial Interfaces | UART, SPI, I2C |
| Direct Memory Access | DMA |
| Timer Resources | Timer |
| I/O Ports | 64 |
| Supply Voltage Range | 2.2 V to 3.6 V |
| パッケージ | 80-LQFP, 12 mm x 12 mm |
| 実装タイプ | Surface Mount |
| Operating Range | Industrial |
| Lifecycle Stage | Active |
MSP430F2619TPN 80-lqfp, 12 mm x 12 mm ピン配置ガイド
MSP430F2619TPN (80-lqfp, 12 mm x 12 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F2619TPN.
詳細は データシート をご参照ください。
主な用途
MSP430F2619TPN の用途: 6 件s: Industrial Sensor Acquisition, Low-Power Data Logger, Building and HVAC Control, Secure Communications Endpoint, Portable Measurement Instrument, AES-Enabled Embedded Controller.
Industrial Sensor Acquisition
The MSP430F2619TPN fits industrial sensor acquisition because its 12-bit ADC provides 4096 possible measurement codes while the comparator supports threshold-based detection. Its 64 I/O ports leave capacity for sensors, digital inputs, indicators, and actuators. The 16 MHz CPU16 core can process acquired values, while DMA transfers data with limited processor intervention. With 120 KB of flash and 4 KB of SRAM, firmware can combine calibration, filtering, diagnostics, and communication in one device.
おすすめ
Low-Power Data Logger
The MSP430F2619TPN is suitable for a low-power data logger that periodically wakes, samples analog signals, stores results, and returns to a low-power state. Its 2.2 V to 3.6 V operating range supports low-voltage designs, while 120 KB of flash can hold firmware and logged configuration data. UART, SPI, and I2C provide options for removable storage or a communications link, and DMA can move blocks without tying up the CPU during transfer.
おすすめ
Building and HVAC Control
The MSP430F2619TPN supports building-control and HVAC monitoring where a controller must read analog sensors, detect thresholds, operate outputs, and communicate with a controller. The comparator provides a fast threshold function, the 12-bit ADC handles proportional measurements, and 64 I/O ports simplify connection of switches, relays, and digital sensors. UART, SPI, and I2C allow the same platform to bridge local sensing to a supervisory network.
おすすめ
Secure Communications Endpoint
The MSP430F2619TPN fits a communications endpoint requiring both protocol handling and hardware-assisted AES capability. Its 16 MHz core, 4 KB of SRAM, and DMA can support UART, SPI, or I2C data movement, while flash stores application firmware and protocol tables. The 80-LQFP package provides 64 I/O ports for status indicators, configuration controls, and multiple external interfaces, making the device suitable for compact embedded gateways and equipment-control nodes.
おすすめ
Portable Measurement Instrument
The MSP430F2619TPN is appropriate for a portable measurement instrument because it combines a 12-bit ADC, comparator, timer resources, and multiple serial interfaces in one package. The 16 MHz processor can execute measurement sequencing and local calculations, while 120 KB of flash accommodates firmware, calibration tables, and interface support. Its 2.2 V to 3.6 V supply range and low-power operating modes align with battery-operated instruments that must balance response time with energy consumption.
おすすめ
AES-Enabled Embedded Controller
The MSP430F2619TPN suits an AES-enabled embedded controller that must process sensor data, maintain serial connectivity, and protect stored or transmitted information. Integrated AES provides a dedicated cryptographic function without requiring a separate security device for compatible workflows. The CPU16 core can coordinate control tasks, DMA can support efficient data movement, and 64 I/O ports leave ample connections for local sensors and actuators. Firmware designers should still define key storage, authorization, and update procedures.
おすすめ
エンジニアリング参考データ: MSP430F2619TPN — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 |
|---|---|
| Package | 80-LQFP (12 mm x 12 mm) |
| Brand | Texas Instruments |
| Processor Core | MSP430 CPU16, 16-bit |
| Maximum Clock Speed | 16 MHz |
| Flash Memory | 120 KB |
| SRAM | 4 KB |
| Operating Supply Voltage | 2.2 V to 3.6 V |
| ADC | 12-bit ADC |
| Communications | UART, SPI, I2C, DMA |
| Cryptography | AES |
主な差別化要因
- Broader flash and I/O allocation than the listed MSP430F2618TPM (vs MSP430F2618TPM)
- Integrated AES support for security-sensitive embedded functions (vs MSP430F2618TPM)
- Higher I/O count for multi-interface embedded equipment (vs MSP430F2618TPM)
設計ノート
Design the supply rail for the listed 2.2 V to 3.6 V operating range and place the required input and output capacitors close to their assigned pins. Keep analog and digital return-current paths controlled, especially when the ADC is used with weak sensor signals. Review the exact capacitor values, power sequencing, and maximum supply limits in the manufacturer datasheet before releasing the PCB layout.
Route the 12-bit ADC inputs away from UART, SPI, I2C, switching supplies, and other high-current digital paths. Use a compact analog input section, minimize loop area, and connect the exposed thermal and power structures according to the package drawing. Because the 80-LQFP device exposes 64 I/O ports, maintain consistent signal-return paths and avoid splitting analog and digital ground planes unnecessarily.
Do not treat the MSP430F2618TPM as a drop-in substitute for the MSP430F2619TPN: the listed packages are 64-LQFP and 80-LQFP respectively. Also do not infer the full pinout from the 64-I/O-port count. The package has dedicated supply, ground, analog, and digital pins in addition to I/O, so assign every land using the manufacturer pin-description table and complete a footprint comparison before substitution.
Configure the ADC acquisition path and DMA sequence for the required measurement bandwidth rather than assuming the maximum CPU clock determines conversion performance. Review the ADC sampling time, reference requirements, and timer interactions in the MSP430F261x documentation. For SPI or high-speed UART links, preserve return paths and validate edge-rate-dependent behavior with the intended cable, connector, and peripheral.
コンプライアンス情報
The device is listed as Active and in the industrial operating range. Specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals statuses were not stated in the available manufacturer and distributor information.