MPC8541ECPXALF - PowerQUICC III e500 MPU 667MHz FCBGA-783 | NXP
部品番号: MPC8541ECPXALF ✓ 生産中MPC8541ECPXALF 概要
A microprocessor (MPU) is the central processing unit of an embedded system, executing instruction-level code from memory and orchestrating peripherals. In the system hierarchy, an MPU sits above microcontrollers (MCUs) which integrate on-chip flash and peripherals; the MPC8541E belongs to the communications-processor class that adds dedicated networking acceleration (SEC, ATM, HDLC, Ethernet) alongside a general-purpose CPU. The 64-bit data bus architecture supports high-throughput packet processing.
Key features include 32 KB L1 instruction cache, 32 KB L1 data cache, 256 KB L2 cache, a DDR memory controller supporting DDR/DDR2, four Gigabit Ethernet controllers (eTSECs), dual 10/100 Ethernet, PCI Express interface, and an integrated security engine (SEC 3.0). Supply voltage is 1.2V core. The 783-ball FCBGA package uses 1 mm pitch and is rated for the extended industrial temperature range (-40C to +105C). The device supports JTAG boundary scan and on-chip debug.
The architecture combines the e500 book-E enhanced PowerPC core with NXP's QUICC Engine subsystem, which offloads communications tasks from the CPU. This hardware-assisted packet processing enables line-rate forwarding on multiple Gigabit Ethernet ports simultaneously, a workload that would saturate a generic CPU but is handled offloaded here.
Typical applications include multiservice routers, Ethernet switches, IP PBX, line cards for DSLAMs, industrial gateways, secure network appliances, and ATA adapters for VoIP. The MPC8541E is also common in military/aerospace and telecom infrastructure requiring long-life-cycle components.
When designing with this device, plan for multi-layer PCB stack-up to route the DDR data lanes with matched impedance (typically 50 ohm differential) and length matching to within 50 ps. The flip-chip BGA requires reflow with peak temperature per JEDEC J-STD-020 moisture sensitivity level handling.
This page synthesizes distributor pricing from NXP authorized channels, drop-in same-package same-family alternatives (MPC8555ECPXALF, MPC8541ECPXALG, MPC8555EVTAPF), and practical design notes not duplicated from the manufacturer datasheet.
ドロップイン代替品: MPC8541ECPXALF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MPC8541ECPXALF （同一形状・フットプリント） — 相違点: L2 Cache, Operating Temperature, Security Engine, Core Architecture, Data Bus Width.
MPC8555ECPXALF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8541ECPXAJD
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
MPC8541ECPXALG
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8555EVTAPF
✅ ドロップイン価格はお問い合わせください
データシートを見る →MPC8541EVTALF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8541ECPXALF 最大定格＆電気的特性
| Core Architecture | PowerPC e500 (Book-E enhanced) |
| Maximum Core Frequency | 667 MHz |
| データバス幅 | 64-bit |
| Instruction Set | 32-bit Power Architecture |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| L2 Cache | 256 KB |
| Core Supply Voltage | 1.2 V (typical) |
| I/O Supply Voltage | 3.3 V |
| Ethernet Controllers | 4x eTSEC (Gigabit) + 2x 10/100 Ethernet (FCC) |
| Memory Controller | DDR/DDR2 with ECC |
| PCI Express | PCIe x1 / x2 |
| Security Engine | SEC 3.0 (DES, 3DES, AES, SHA, MD5, RSA, Kasumi) |
| パッケージ | 783-FCBGA (29 x 29 mm, 1 mm pitch, flip chip) |
| 動作温度 | -40C to +105C |
| 実装タイプ | Surface Mount |
| RoHS Compliance | Compliant (lead-free) |
MPC8541ECPXALF 783-fcbga (29 x 29 mm, 1 mm pitch, flip chip) ピン配置ガイド
MPC8541ECPXALF (783-fcbga (29 x 29 mm, 1 mm pitch, flip chip) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8541ECPXALF.
詳細は データシート をご参照ください。
主な用途
MPC8541ECPXALF の用途: 6 件s: Multiservice Router / Edge Gateway, VoIP IP-PBX and Unified Communications Appliance, Industrial Ethernet Gateway / PLC, DSLAM Line Card / Access Concentrator, Secure Network Appliance / VPN Concentrator, ATA Adapter / VoIP Residential Gateway.
Multiservice Router / Edge Gateway
The MPC8541ECPXALF is ideal for multiservice router and edge-gateway designs because its four integrated Gigabit Ethernet controllers (eTSECs) provide line-rate forwarding on multiple WAN/LAN ports simultaneously. The QUICC Engine 1.5 subsystem offloads PDH, ATM, and HDLC traffic, leaving the e500 core available for routing protocols. With the SEC 3.0 engine, the part accelerates IPsec/SSL for VPN termination at the network edge without off-chip crypto ASICs, reducing BOM cost in compact edge appliances.
おすすめ
VoIP IP-PBX and Unified Communications Appliance
In VoIP IP-PBX systems the MPC8541ECPXALF runs VxWorks or Linux to terminate SIP trunks and TDM buses. The dual 10/100 Ethernet controllers bridge the LAN and WAN, while the DDR/DDR2 memory controller holds open call records and codec buffers. The SEC engine accelerates SRTP/AES encryption so that encrypted SIP sessions scale to hundreds of calls per server blade.
おすすめ
Industrial Ethernet Gateway / PLC
Industrial automation gateways based on the MPC8541ECPXALF aggregate Modbus/TCP, EtherNet/IP, and PROFINET traffic across the four Gigabit ports. The -40C to +105C industrial temperature rating supports factory-floor deployment, and the SEC engine hardens PLC-to-cloud traffic with hardware-accelerated TLS. The DDR memory controller buffers SCADA telemetry bursts, while JTAG/BDM enables field firmware updates over the life of a 20+ year industrial platform.
おすすめ
DSLAM Line Card / Access Concentrator
The MPC8541ECPXALF builds the control-plane processor of DSLAM line cards, terminating multiple ATM/IMA/E1 links via the FCCs and QUICC Engine. Each eTSEC port uplinks to an aggregation switch through SGMII, with SEC handling encryption for the backhaul. The L2 cache (256 KB) keeps pointer-heavy forwarding tables on-die, avoiding DDR round trips at packet arrival peaks of multi-thousand pps.
おすすめ
Secure Network Appliance / VPN Concentrator
The MPC8541ECPXALF anchors VPN concentrator and firewall appliances where SEC 3.0 handles IPsec ESP tunneling of thousands of concurrent tunnels. The four eTSECs segment DMZ, WAN, LAN, and management networks, while PCI Express connects to an external crypto offload card or SSD for logging. Wide operating-temperature support enables deployment in unconditioned wiring closets.
おすすめ
ATA Adapter / VoIP Residential Gateway
The MPC8541ECPXALF is suited for residential ATA adapters converting POTS to SIP/VoIP via the FCCs and DSP-managed timing. The single e500 core runs SIP/RTP stacks plus QoS shaping, while SEC 3.0 provides SRTP for secure voice. The compact FCBGA footprint fits the small PCB area typical of wall-plug ATA plastic enclosures, and industrial temperature rating ensures field reliability across HVAC climates.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8541ECPXALF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8555ECPXALF | MPC8541ECPXAJD | MPC8541ECPXALG | MPC8555EVTAPF | MPC8541EVTALF |
|---|---|---|---|---|---|---|
| Package | 783-FCBGA (29x29 mm) | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same | 783-FCBGA (29x29 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Frequency | 667 MHz | 667 MHz | 667 MHz | 667 MHz | 833 MHz | 667 MHz |
| Ethernet Controllers | 4x eTSEC + 2x FCC | 4x eTSEC + 2x FCC | 4x eTSEC + 2x FCC | 4x eTSEC + 2x FCC | 4x eTSEC + 2x FCC | 4x eTSEC + 2x FCC |
| QUICC Engine Version | QUICC Engine 1.5 | QUICC Engine 2.0 | QUICC Engine 1.5 | QUICC Engine 1.5 | QUICC Engine 2.0 | QUICC Engine 1.5 |
| Security Engine | SEC 3.0 | SEC 3.0 | SEC 3.0 | SEC 3.0 | SEC 3.0 | SEC 3.0 |
| L2 Cache | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| Approx. Unit Price (qty 1, 2026) | $213 | $230-$260 | $200-$220 | $213 | $340-$400 | $220-$260 |
主な差別化要因
- Higher-line-rate QUICC Engine offload vs MPC8533 （vs MPC8533)
- On-die SEC 3.0 vs external crypto ASIC （vs Generic PowerQUICC without SEC)
- Integrated 4-port GbE vs multi-chip GbE switch （vs MPC8555E)
設計ノート
The MPC8541ECPXALF uses a 783-ball FCBGA package on 1.0 mm pitch; PCB stack-up must allocate at least 6 layers with dedicated GND and PWR planes beneath the BGA footprint. DDR2 data lanes require 50 ohm single-ended (100 ohm differential) impedance and length-matching to within 50 ps (approximately 8 mm on FR4). Per IPC-7351 and NXP hardware specifications, vias-in-pad with filled/capped plating are recommended to escape the FCBGA; otherwise microvia-to-inner-layer escape routing quickly exhausts the upper-layer routing channels.
Estimated: At 1.2 V core and 667 MHz, the part dissipates approximately 5 W under typical networking workloads. Without airflow in a sealed enclosure, attach a small clip-on heatsink with thermal interface material to the exposed top of the FCBGA, or couple to chassis through a thermal pad. Keep junction temperature below 105 C by ensuring at least 150 lfm airflow; the Rtheta_JA of the FCBGA-783 with the standard JEDEC test board is approximately 13 C/W.
The power-on reset sequence mandates specific supply-rail timing: VDD_CORE (1.2 V) must stabilize before VDD_IO (3.3 V) and the DDR reference voltage VTT. Reverse sequencing risks latch-up. Boot configuration is sampled from power-on reset signals and must match the firmware image's reset configuration word (RCW); incorrect RCW values leave the e500 core executing from the wrong memory map and the part appears 'bricked'. Always derive HRESET from a supervisor, do not strap directly to GND.
The 10/100/1000 Ethernet SERDES lanes on the eTSECs are tuned for SGMII/RGMII; do not route them over the same stack-up layer as DDR strobes. Use the SERDES reference clock at 125 MHz +/-50 ppm with a clean jitter isolator buffer. PCI Express x1/x2 lanes follow the same isolated-stackup rule as SERDES to maintain 100 ohm differential return loss in the 1.5 GHz Nyquist band.
コンプライアンス情報
RoHS compliant, lead-free FCBGA-783 per NXP product environmental compliance documentation. Not AEC-Q100 qualified (industrial/commercial MPU). REACH compliant per EU REACH SVHC declarations.
