MPC8541VTAPF - PowerPC e500 MPU 833MHz 783-FCPBGA | NXP
部品番号: MPC8541VTAPF ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $247.96 | $247.96 |
| 10 | $223.16 | $2,231.60 |
| 100 | $198.37 | $19,837.00 |
| 500 | $173.57 | $86,785.00 |
| 1,000 | $148.78 | $148,780.00 |
MPC8541VTAPF 概要
A microprocessor (MPU) is a single-chip CPU that integrates the central processing unit, cache, memory controller, and peripheral interfaces on a single die. The MPC85xx family is a line of PowerQUICC III integrated communications processors that sit in the broader hierarchy of microprocessors -> processors -> integrated circuits -> semiconductors. These devices are purpose-built for routing, switching, and industrial control workloads where deterministic performance and high I/O bandwidth are required.
Key features of the MPC8541VTAPF include a PowerPC e500 core with 32KB L1 instruction cache and 32KB L1 data cache, a 256KB L2 cache, a double-precision floating-point unit, dual integrated triple-speed Ethernet controllers supporting 10/100/1000 Mbps, a 64-bit DDR memory controller, dual PCI/PCI-X controllers, and a flexible local bus interface. The device operates from a 1.3V core supply and 2.5V/3.3V I/O supplies, with a junction temperature range suitable for industrial and networking environments.
Architecturally, the MPC8541 combines a high-frequency e500 core with the PowerQUICC III communications engine, allowing wire-speed processing of networking packets while reserving CPU cycles for control-plane tasks. The integrated security engine and DMA controllers offload typical networking bottlenecks, while the high-bandwidth DDR controller supports up to DDR-333 with ECC for memory-intensive routing tables.
Typical applications include enterprise routers and switches, WAN access equipment, industrial automation controllers, network-attached storage (NAS) controllers, and embedded telecommunications platforms. The 833 MHz core frequency and rich peripheral set make it suitable for control-plane processing in mid-range networking gear.
When designing with the MPC8541VTAPF, careful attention to multi-rail decoupling, signal integrity on the DDR bus, and PCB layer stack-up for the high-pin-count BGA is essential. Because the part is now in NXP's end-of-life lifecycle, long-term availability planning and second-source qualification should be considered up front.
This page synthesizes distributor pricing, drop-in alternatives drawn from the MPC85xx family, and practical design notes not found in the manufacturer datasheet, giving engineers a single, citable reference for sourcing and replacement decisions.
ドロップイン代替品: MPC8541VTAPF — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MPC8541VTAPF （同一形状・フットプリント） — 相違点: Memory Controller, Package, Mounting Type, Number of Cores, Data Bus Width.
クイック比較ツール — 並列比較する代替部品を選択:
MPC8541PXAPF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8541EPXAPF
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8555VTAPF
✅ ドロップイン✓ 在庫あり
$152 / 個
データシートを見る →MPC8541VTAPF-FR
✅ ドロップイン✓ 在庫あり
$71 / 個
データシートを見る →MPC8541VTAPF 最大定格＆電気的特性
| Core Architecture | PowerPC e500 |
| Number of Cores | 1 |
| データバス幅 | 32-Bit |
| Maximum Core Frequency | 833 MHz |
| L1 Instruction Cache | 32 KB |
| L1 Data Cache | 32 KB |
| L2 Cache | 256 KB |
| Floating-Point Unit | Double-precision |
| Memory Controller | 64-bit DDR (up to DDR-333, ECC) |
| Ethernet Controllers | 2x integrated 10/100/1000 Mbps TSEC |
| PCI / PCI-X Controllers | 2 |
| Local Bus Interface | Yes (16-bit, up to 66 MHz) |
| Core Supply Voltage | 1.3 V |
| I/O Supply Voltage | 2.5 V / 3.3 V |
| パッケージ | 783-FCPBGA (29 x 29 mm) |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
MPC8541VTAPF 783-fcpbga (29 x 29 mm) ピン配置ガイド
MPC8541VTAPF (783-fcpbga (29 x 29 mm) パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8541VTAPF.
詳細は データシート をご参照ください。
主な用途
MPC8541VTAPF の用途: 6 件s: Enterprise Routers and Switches, WAN Access Equipment, Industrial Automation Controllers, Network-Attached Storage (NAS) Controllers, Embedded Telecommunications Platforms, Legacy Defense and Aerospace Networking Equipment.
Enterprise Routers and Switches
The MPC8541VTAPF's 833 MHz PowerPC e500 core and dual integrated triple-speed Ethernet controllers (TSEC) make it well suited to mid-range enterprise routers and Layer 2/3 switches. The hardware accelerates packet classification, routing table lookup, and forwarding at wire speed while reserving CPU cycles for control-plane protocols such as OSPF, BGP, and MPLS. Per the NXP MPC8541E datasheet, the DDR-333 controller with ECC supports large routing tables. The 783-FCPBGA package integrates cleanly into multilayer router PCBs with dedicated power planes.
おすすめ
WAN Access Equipment
DSLAMs, multi-service access nodes, and WAN aggregation equipment leverage the MPC8541VTAPF for protocol termination and traffic shaping. The dual TSEC interfaces combined with the PCI/PCI-X controllers allow direct attachment of DSL PHY chips and TDM framers without external glue logic. According to NXP's PowerQUICC III reference designs, the integrated DMA engine offloads packet copy operations, freeing the e500 core for QoS scheduling. The 1.3 V core supply at typical 5-8 W dissipation suits fanless access-node chassis.
おすすめ
Industrial Automation Controllers
Deterministic real-time control applications such as PLCs, motion controllers, and industrial gateways benefit from the MPC8541VTAPF's integrated peripheral set and high core frequency. The local bus interface connects directly to FPGA-based I/O modules or ASIC glue, while the dual Ethernet ports enable redundant PROFINET/EtherNet/IP topologies. Per the NXP product family documentation, the PowerQUICC III architecture is widely deployed in industrial controllers. The wide supply tolerance and BGA package suit ruggedized industrial chassis.
おすすめ
Network-Attached Storage (NAS) Controllers
Mid-range NAS controllers use the MPC8541VTAPF as the main SoC managing RAID, file-system services, and dual GbE network interfaces. The 64-bit DDR controller with ECC handles disk-cache operations while the PCI-X bus attaches SATA or SAS controllers via bridge chips. According to the NXP MPC8541E datasheet, the L2 cache of 256 KB accelerates metadata operations. Designers should pair the MPC8541VTAPF with a platform-software stack such as Linux with NFS/CIFS support.
おすすめ
Embedded Telecommunications Platforms
The MPC8541VTAPF is widely deployed in embedded telecom platforms such as media gateways, IP-PBX controllers, and base-station transmission units. The integrated TDM support via the local bus and the high-bandwidth Ethernet ports handle voice and signaling traffic. Per NXP PowerQUICC III product collateral, the device's hardware queue manager accelerates packet scheduling. The 783-FCPBGA package fits into ATCA/AMC-style mezzanine layouts common in telecom chassis.
おすすめ
Legacy Defense and Aerospace Networking Equipment
Long-lifecycle defense and aerospace networking programs continue to use the MPC8541VTAPF because of its deterministic PowerPC architecture and proven reliability in deployed field systems. Per DigiKey distributor records and Rochester Electronics listings, the part remains procurable through authorized long-term suppliers. Engineers sustaining these programs benefit from a stable PowerQUICC III software ecosystem and BSP support. Designers must verify the operating temperature grade and any MIL-spec screening against the specific lot.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8541VTAPF — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8541PXAPF | MPC8541EPXAPF | MPC8555VTAPF | MPC8541VTAPF-FR |
|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 783-FCPBGA (29x29) | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same | 783-FCPBGA (29x29) - same |
| Core Architecture | PowerPC e500, 1 core | PowerPC e500, 1 core | PowerPC e500, 1 core + SEC | PowerPC e500, 1 core | PowerPC e500, 1 core (refreshed) |
| Core Frequency | 833 MHz | Alternative speed grade | 833 MHz (typical) | Higher CPM performance | 833 MHz |
| Security Engine | No | No | Yes (SEC) | Optional (variant dependent) | No |
| L2 Cache | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Memory Controller | 64-bit DDR up to DDR-333, ECC | Same | Same | Same | Same |
| Ethernet Controllers | 2x 10/100/1000 TSEC | 2x 10/100/1000 TSEC | 2x 10/100/1000 TSEC | 2x 10/100/1000 TSEC + CPM | 2x 10/100/1000 TSEC |
主な差別化要因
- PowerQUICC III integrated communications architecture （vs MPC8541PXAPF)
- 833 MHz core frequency in 783-ball FCPBGA （vs MPC8541EPXAPF)
- DDR-333 with 64-bit bus and ECC （vs MPC8555VTAPF)
設計ノート
The 783-FCPBGA package requires a multilayer PCB (typically 8-12 layers) with microvia or via-in-pad technology for the inner-row balls. Per NXP MPC8541E reference designs, allocate a continuous ground plane on layer 2 directly beneath the BGA, with dedicated power islands for the 1.3 V core rail and 2.5 V/3.3 V I/O rails. Use 1-oz copper on outer planes plus 0.5-oz on inner layers for high-current core delivery.
Decouple each VDD/VSS ball pair with a 0.1 uF X7R ceramic capacitor placed within 2 mm of the ball. Add bulk decoupling of 22-47 uF tantalum or polymer capacitors on each rail. The 1.3 V core rail may require 4-6 A under typical 833 MHz operation. Use a sequenced power architecture with the core rail coming up before the I/O rails to avoid I/O bus contention during startup.
Because the MPC8541VTAPF is in NXP's End of Life lifecycle, do not start new production designs without securing a long-term supply agreement. Rochester Electronics and authorized aftermarket distributors carry factory-reclaimed inventory. Validate any secondary-source part against the original NXP datasheet revision; the '-FR' suffix denotes factory-reclaimed stock, which has identical die but may carry different date codes.
コンプライアンス情報
RoHS compliance per DigiKey distributor listing. Reach and conflict-mineral statements are not present in the Verified Web Data and should be confirmed via NXP product-change-notice documentation. AEC-Q100 is not applicable for this MPU class.
