MPC8572EPXAULE - PowerQUICC III Dual-Core SoC, 1.33 GHz, FCPBGA-1023 | NXP
部品番号: MPC8572EPXAULE ✓ 生産中MPC8572EPXAULE 概要
A communications SoC (System-on-Chip) is a highly integrated processor that combines general-purpose CPU cores, memory controllers, and specialized I/O peripherals on a single die, eliminating the need for a companion northbridge or I/O hub. The PowerQUICC III family sits within NXP's broader communications processor taxonomy: SoC -> multicore MPU -> PowerQUICC family -> PowerPC architecture -> RISC processor, and it is widely deployed in routers, switches, and line-card aggregation designs where deterministic I/O and deep protocol offload are required.
Key features include dual e500 cores with 36-bit physical addressing, integrated DDR2/DDR3 SDRAM controller with ECC, four Gigabit Ethernet MACs, two PCI Express interfaces, two Serial RapidIO endpoints, and a hardware-accelerated security engine (SEC) for IPSec, SSL/TLS, and bulk encryption. The device targets a 0 to +105 °C operating range, addressing thermally constrained telco and industrial environments.
Architecturally, the MPC8572EPXAULE uses a coherent shared-bus topology with a global queue manager, allowing deterministic task distribution between the two cores. CoreNet coherency fabric integrates the memory controller and switch fabric, simplifying board design while sustaining multi-Gbps aggregate throughput across Ethernet and RapidIO lanes.
Typical applications include multi-service routers, edge and aggregation switches, wireless baseband controllers, network-attached storage controllers, and industrial control platforms requiring secure, deterministic multi-core performance. The integrated SEC engine also suits VPN gateways and encrypted SAN front-ends.
When designing with this part, allocate adequate power and thermal headroom: at 1.333 GHz the part can dissipate tens of watts, requiring multiple PCB layers, a heatsink, and airflow. Ensure the boot ROM and CPLD/FPGA glue logic correctly drive the Local Bus, JTAG, and reset configuration pins according to the reference manual.
This page synthesizes distributor pricing, package-level drop-in analysis, and practical design notes drawn from NXP reference designs - context not duplicated on the manufacturer datasheet or typical distributor listings.
ドロップイン代替品: MPC8572EPXAULE — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MPC8572ECPXAULE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8572ECVXAULE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8572EPXAVNE
✅ ドロップイン📋 参考代替品（カタログ未掲載）
MPC8572EPXAULE 最大定格＆電気的特性
| Product Family | PowerQUICC III |
| Core Architecture | PowerPC e500 (dual-core) |
| Number of Cores | 2 |
| Maximum Core Frequency | 1.333 GHz |
| L2 Cache | 1 MB shared |
| Memory Controller | DDR2/DDR3 with ECC |
| Gigabit Ethernet MACs | 4 |
| PCI Express Interfaces | 2 |
| Serial RapidIO | 2 lanes (endpoint) |
| Security Engine | SEC (IPSec/SSL/TLS/bulk crypto) |
| パッケージ | 1023-ball FCBGA (FCPBGA-1023), 33x33 mm |
| 動作温度 | 0 °C to +105 °C |
| Silicon Revision | R2.2.1 |
| 実装タイプ | Surface Mount |
| Lead-Free / Solder Finish | SnPb (per part suffix) |
| MSLレベル | 3 (per JEDEC J-STD-020, recommended) |
MPC8572EPXAULE 1023-ball fcbga (fcpbga-1023), 33x33 mm ピン配置ガイド
MPC8572EPXAULE (1023-ball fcbga (fcpbga-1023), 33x33 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MPC8572EPXAULE.
詳細は データシート をご参照ください。
主な用途
MPC8572EPXAULE の用途: 6 件s: Multi-Service Routers, Edge and Aggregation Switches, Wireless Baseband Controllers, Network-Attached Storage (NAS) Controllers, Industrial Control and Secure Gateways, Secure VPN / SSL Appliances.
Multi-Service Routers
The MPC8572EPXAULE's dual e500 cores at 1.333 GHz and four integrated Gigabit Ethernet MACs make it a strong fit for multi-service router line cards that need deep packet inspection and forwarding on the data plane. The 1 MB shared L2 cache and CoreNet coherency fabric sustain wire-rate routing table lookups and ACL evaluation under load, while the integrated SEC engine terminates IPSec/SSL tunnels without burdening the cores. Designers typically pair the device with NXP PHY transceivers and an external DDR3 with ECC, then run Linux with DPDK or u-boot + VxWorks for fast boot.
おすすめ
Edge and Aggregation Switches
For edge/aggregation switches, the MPC8572EPXAULE's combination of PCI Express endpoints and dual Serial RapidIO ports allows it to fan out to switching ASICs and line cards without an external bridge. The dual-core topology maps cleanly to control-plane and data-plane partitioning, with the queue manager distributing traffic deterministically. The DDR2/DDR3 controller with ECC handles deep routing-table storage, and the hardware SEC engine accelerates MACsec/IPsec for encrypted trunks. Telco chassis (0 to +105 °C) are within the device's thermal envelope.
おすすめ
Wireless Baseband Controllers
In wireless baseband controllers, the MPC8572EPXAULE's 1.333 GHz e500 cores execute PHY-layer signal processing and MAC scheduling, while its PCI Express and Serial RapidIO ports connect to RF front-end cards and baseband FPGA co-processors. The integrated SEC engine provides hardware-accelerated encryption for air-interface security (LTE/5G NR integrity protection). The shared L2 cache and coherent CoreNet fabric help maintain deterministic latency under bursty MAC scheduling loads typical of small-cell and picocell deployments.
おすすめ
Network-Attached Storage (NAS) Controllers
The MPC8572EPXAULE fits NAS controller designs that require RAID-on-chip compute, network protocol offload, and high-throughput storage I/O. Dual e500 cores handle file-system journaling and SMB/NFS/iSCSI request processing, while PCI Express and Serial RapidIO link to storage controllers and SAS expanders. The hardware SEC engine offloads SMB3 encryption (AES-CCM) and iSCSI IPsec, leaving the cores free for storage I/O. DDR3 with ECC ensures data integrity for transactional workloads.
おすすめ
Industrial Control and Secure Gateways
Industrial gateways benefit from the MPC8572EPXAULE's hardware SEC engine for VPN/IPsec termination between plant-floor controllers and enterprise networks. Dual cores handle deterministic real-time protocol stacks (e.g., EtherCAT, PROFINET) and HTTP/SQL/SCADA traffic in parallel. The 0 to +105 °C thermal envelope tolerates enclosed industrial cabinets with limited airflow. PCI Express interfaces connect to industrial Ethernet PHYs and field-bus cards, while Serial RapidIO links to motion-control FPGA co-processors.
おすすめ
Secure VPN / SSL Appliances
The integrated SEC engine makes the MPC8572EPXAULE an excellent fit for dedicated VPN/SSL appliances that need line-rate AES/3DES/SHA offload. Dual cores handle session establishment and policy management while the SEC engine sustains multi-Gbps encrypted tunnels. The four Gigabit Ethernet MACs support WAN/LAN/DMZ segmentation, and PCI Express connects to high-speed crypto accelerators or NV storage for audit logs. Telco-grade temperature range (0 to +105 °C) suits appliance chassis.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MPC8572EPXAULE — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MPC8572ECPXAULE | MPC8572ECVXAULE | MPC8572EPXAVNE |
|---|---|---|---|---|
| Package | 1023-FCPBGA (33x33 mm) | 1023-FCPBGA (33x33 mm) - same | 1023-FCPBGA (33x33 mm) - same | 1023-FCPBGA (33x33 mm) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core / Cores | 2x PowerPC e500 | 2x PowerPC e500 - same | 2x PowerPC e500 - same | 2x PowerPC e500 - same |
| Max Core Frequency | 1.333 GHz | 1.333 GHz - same | 1.333 GHz - same | 1.333 GHz - same |
| L2 Cache | 1 MB shared | 1 MB shared - same | 1 MB shared - same | 1 MB shared - same |
| Memory Controller | DDR2/DDR3 + ECC | DDR2/DDR3 + ECC - same | DDR2/DDR3 + ECC - same | DDR2/DDR3 + ECC - same |
| Gigabit Ethernet MACs | 4 | 4 - same | 4 - same | 4 - same |
| PCI Express Lanes | 2 interfaces | 2 - same | 2 - same | 2 - same |
| Security Engine | Integrated SEC | Integrated SEC - same | Integrated SEC - same | Integrated SEC - same |
| Operating Temperature | 0 °C to +105 °C | 0 °C to +105 °C - same | 0 °C to +105 °C - same | Extended - verify exact spec |
主な差別化要因
- Only 1023-FCPBGA member with default factory silicon revision （vs MPC8572ECPXAULE / MPC8572ECVXAULE)
- Integrated Security Engine (SEC) for crypto offload （vs MPC8572PXAULE (non-E))
- Dual e500 cores with shared 1 MB L2 cache （vs Single-core PowerQUICC III (MPC8536))
設計ノート
The MPC8572EPXAULE can dissipate tens of watts at 1.333 GHz under full dual-core load with active SerDes. Place a heatsink rated for the chassis airflow profile, and provide at least 4 PCB layers with continuous ground plane beneath the BGA. Verify junction temperature with on-die thermal diode and NXP-supplied calibration data; aim for < 95 °C Tj in worst-case corner.
Use a 33x33 mm land pattern matching the 1023-ball FCBGA (1 mm pitch per NXP package drawing). Escape traces on outer layers through via-in-pad is recommended for signal integrity; co-routing SerDes lanes requires matched-length, 90 Ω differential impedance, and continuous reference planes. Follow NXP's MPC8572 hardware design guide for DDR3 and SerDes routing rules.
Decouple the MPC8572EPXAULE with a stack of bulk + ceramic capacitors near each power rail (core VDD, DDR PHY VDD, SerDes AVDD, PLL AVDD). Use an NXP-recommended power sequencing controller to enforce core-before-I/O ramp-up. Add a soft-start circuit on the upstream DC-DC to limit inrush current during boot.
Do not assume the MPC8572EPXAULE is drop-in compatible with earlier PowerQUICC III parts (MPC8548 uses 783-FCPBGA, MPC8536 uses 676-FCPBGA). Verify boot ROM configuration against the silicon revision (R2.2.1) and check JTAG/CCSR defaults after each reset. The 'E' suffix is required for the SEC engine - non-E variants do not include crypto acceleration.
コンプライアンス情報
Solder finish per part suffix 'LE' indicates SnPb (leaded) - the part is NOT lead-free per the verified supplier listing. RoHS/REACH status not explicitly stated in the verified web data and marked unknown.
