MSP430F135IPAG - 8MHz, 16KB Flash MCU | Texas Instruments
部品番号: MSP430F135IPAG ✓ 生産中MSP430F135IPAG 概要
A mixed-signal microcontroller is a semiconductor that integrates digital processing with analog measurement functions. In the product hierarchy, the MSP430F135IPAG is a mixed-signal MCU, a microcontroller, an embedded processor, and ultimately a semiconductor. This integration allows a board to measure an analog input, process the result, and communicate through a serial interface without requiring several separate devices.
The principal features include an 8 MHz maximum clock, 16 KB flash, 512 B SRAM, and a 12-bit ADC. The flash provides nonvolatile program storage for embedded firmware, while SRAM supports working data and stack operations. The ADC and comparator support analog measurement and thresholding, and the SPI and UART interfaces provide connectivity to sensors, displays, data loggers, and external processors.
The MSP430 architecture is designed around an ultralow-power mixed-signal platform. Its 16-bit RISC CPU provides efficient control processing, while integrated analog peripherals reduce the need for external conversion and comparison circuitry. The manufacturer product page identifies the MSP430F135 as part of the MSP430x1xx family and lists its CPU, memory, ADC, comparator, SPI, and UART resources.
Typical applications include industrial sensor nodes, battery-powered instruments, compact data loggers, building and access controls, motor or process monitoring, and low-power embedded equipment. In each case, the MCU can sample a 12-bit analog signal, run control firmware from flash, and transmit results through SPI or UART. The 64-pin TQFP package also provides enough external I/O for sensors, indicators, communications, and supporting circuitry.
PCB design should preserve clean analog and digital return paths around the ADC and power pins. Follow the manufacturer datasheet for the exact pin assignments, decoupling requirements, analog-input routing, and exposed-pad or thermal-layout guidance. Confirm the complete pinout and peripheral multiplexing for the selected firmware configuration before fabrication.
This product page combines the manufacturer specifications, exact-package identification, sourcing guidance, and engineering-focused usage guidance. It also distinguishes verified device capabilities from details that must be confirmed in the datasheet, helping engineers evaluate the MSP430F135IPAG before committing a 64-pin mixed-signal design to production.
ドロップイン代替品: MSP430F135IPAG — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F135IPAG (同一形状・フットプリント) — 相違点: Flash Memory, Package, SRAM.
この製品に利用可能なドロップイン代替品はありません。
代替品をリクエストMSP430F135IPAG 最大定格&電気的特性
| Product Type | Mixed-signal microcontroller |
| CPU Architecture | 16-bit MSP430 CPU |
| 最大クロック周波数 | 8 MHz |
| Flash Memory | 16 KB |
| SRAM | 512 B |
| ADC Resolution | 12 bits |
| Comparator | Integrated |
| SPI Interface | Integrated |
| UART Interface | 1 USART |
| パッケージ | 64-pin TQFP (PAG), 10 mm x 10 mm |
| 実装タイプ | Surface mount |
MSP430F135IPAG 64-pin tqfp (pag), 10 mm x 10 mm ピン配置ガイド
MSP430F135IPAG (64-pin tqfp (pag), 10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F135IPAG.
詳細は データシート をご参照ください。
主な用途
MSP430F135IPAG の用途: 6 件s: Industrial Sensor Node, Battery-Powered Data Logger, Building and Access Control, Process and Motor Monitoring, Portable Measurement Instrument, Communication Endpoint.
Industrial Sensor Node
MSP430F135IPAG fits industrial sensor nodes that need local analog measurement and low-power serial control in one device. Its 12-bit ADC can acquire sensor information, while the comparator can support threshold or alarm functions without another dedicated device. The 8 MHz 16-bit processor provides local filtering and control, and the SPI and UART interfaces can connect a sensor or radio. A 64-pin TQFP package also offers ample I/O for indicators, inputs, and field-bus circuitry. The design should provide clean analog grounding and follow the datasheet's ADC layout and decoupling recommendations.
Battery-Powered Data Logger
MSP430F135IPAG is appropriate for a compact, battery-powered data logger because it combines an MSP430 processor with the ADC, comparator, and serial interfaces needed for autonomous measurement. Firmware can sample analog inputs, store operational data in 16 KB of flash, and transfer records through SPI or UART during a service interval. The controller's low-power MSP430 architecture supports designs that spend most of their time waiting rather than processing continuously. Final battery-life estimates depend on the selected sleep mode, wake-up frequency, sensor load, flash-retention requirement, and regulator efficiency.
Building and Access Control
MSP430F135IPAG can serve as the central controller in a building-access or environmental-control module. Its integrated comparator handles simple threshold decisions, the 12-bit ADC supports analog sensing, and UART or SPI provides links to card readers, display modules, or remote controllers. Sixteen kilobytes of flash is sufficient for compact protocol and control firmware, while 512 B of SRAM supports short-term buffering. The 64-pin TQFP footprint leaves room for external relays, indicator drivers, and communication circuitry. Firmware and security requirements should be reviewed before adapting the MCU to an access-control role.
Process and Motor Monitoring
MSP430F135IPAG suits compact process-monitoring equipment where a controller must observe analog process values and report operating status. The 12-bit ADC can acquire sensor signals, the comparator can establish independent thresholds, and the 8 MHz 16-bit CPU can perform scaling, filtering, and control calculations. SPI can connect to a local display or storage device, while UART can provide a maintenance or supervisory link. The integrated peripherals reduce the component count around the controller. For motor-driven or high-energy circuits, maintain separation between the MSP430 signal ground and switching-power paths, and include appropriate protection outside the MCU.
Portable Measurement Instrument
MSP430F135IPAG is a strong fit for a portable measurement instrument that combines a numeric sensor output, local control, and a wired interface. The ADC accepts the measurement signal, the comparator supports range or limit detection, and the 16-bit processing core performs calibration and conversion before data is displayed or transmitted. SPI supports faster local peripherals, while UART offers a simple connection to a host or configuration tool. The TQFP package is practical for a mixed-signal board requiring numerous digital and analog connections. Calibration storage, analog reference design, and low-power behavior should be established using the manufacturer's characterization information.
Communication Endpoint
MSP430F135IPAG can act as a compact protocol endpoint when a system needs to translate between analog measurements and an embedded serial link. The integrated UART supports a straightforward asynchronous connection, while SPI offers a synchronous interface for radios, memory, or display peripherals. The 12-bit ADC and comparator let the same device perform local sensing before data is transmitted, reducing the need for separate interface devices. Sixteen kilobytes of flash can hold compact protocol and application firmware, and 512 B of SRAM supports packet buffering. Protocol timing, interrupt latency, and peripheral sharing must be verified against the selected system clock and board topology.
エンジニアリング参考データ: MSP430F135IPAG — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
主な差別化要因
- Integrated mixed-signal resource set (vs MSP430F133IPMR)
- Package-specific board implementation (vs MSP430F135IPMR)
- Integrated communication and conversion (vs MSP430F133IPMR)
設計ノート
Route analog inputs away from digital clocks, serial edges, and switching-converter nodes. Use the manufacturer's recommended analog-ground and supply connections, place the required bypass capacitors close to their designated pins, and avoid long traces beneath or beside sensitive ADC inputs. The 10 mm by 10 mm TQFP footprint has fine-pitch leads, so verify annular rings, solder-mask clearance, and paste stencil apertures against the current land pattern.
Design the supply network for both active-current peaks and low-current standby operation. Confirm the allowed supply range, decoupling values, and power sequencing requirements in the manufacturer datasheet before selecting regulators or bulk capacitance. Separate analog and digital supply paths where the recommended application circuit permits it, and account for transients generated by external relays, radio modules, or actuators connected to the MCU board.
Do not treat another MSP430 model as a drop-in replacement solely because it uses a similar package or belongs to the same family. Check the 64-pin TQFP (PAG) footprint, every multiplexed pin, ADC channels, timer resources, serial interfaces, interrupt vectors, memory size, clock configuration, and device-specific register behavior. Rebuild the board and firmware validation plan for any different device, even when the nominal flash and SRAM sizes appear similar.
コンプライアンス情報
The available manufacturer page and distributor snippets do not state the exact compliance status of MSP430F135IPAG. Consult the current TI product documentation and applicable declaration files before making a compliance determination.