Texas Instruments

MSP430F135IPAG - 8MHz, 16KB Flash MCU | Texas Instruments

MPN: MSP430F135IPAG ✓ 啟用中
64-pin TQFP (PAG), 10 mm x 10 mm Package 8 MHz Speed 16 KB Memory
MOQ: 1 |

MSP430F135IPAG 概覽

Texas Instruments MSP430F135IPAG is an 8 MHz mixed-signal microcontroller with 16 KB of flash memory, 512 bytes of SRAM, a 12-bit ADC, a comparator, and SPI/UART serial interfaces in a 64-pin TQFP (PAG) package. The MSP430F135IPAG combines a 16-bit CPU with embedded analog and communication peripherals for compact control systems.

A mixed-signal microcontroller is a semiconductor that integrates digital processing with analog measurement functions. In the product hierarchy, the MSP430F135IPAG is a mixed-signal MCU, a microcontroller, an embedded processor, and ultimately a semiconductor. This integration allows a board to measure an analog input, process the result, and communicate through a serial interface without requiring several separate devices.

The principal features include an 8 MHz maximum clock, 16 KB flash, 512 B SRAM, and a 12-bit ADC. The flash provides nonvolatile program storage for embedded firmware, while SRAM supports working data and stack operations. The ADC and comparator support analog measurement and thresholding, and the SPI and UART interfaces provide connectivity to sensors, displays, data loggers, and external processors.

The MSP430 architecture is designed around an ultralow-power mixed-signal platform. Its 16-bit RISC CPU provides efficient control processing, while integrated analog peripherals reduce the need for external conversion and comparison circuitry. The manufacturer product page identifies the MSP430F135 as part of the MSP430x1xx family and lists its CPU, memory, ADC, comparator, SPI, and UART resources.

Typical applications include industrial sensor nodes, battery-powered instruments, compact data loggers, building and access controls, motor or process monitoring, and low-power embedded equipment. In each case, the MCU can sample a 12-bit analog signal, run control firmware from flash, and transmit results through SPI or UART. The 64-pin TQFP package also provides enough external I/O for sensors, indicators, communications, and supporting circuitry.

PCB design should preserve clean analog and digital return paths around the ADC and power pins. Follow the manufacturer datasheet for the exact pin assignments, decoupling requirements, analog-input routing, and exposed-pad or thermal-layout guidance. Confirm the complete pinout and peripheral multiplexing for the selected firmware configuration before fabrication.

This product page combines the manufacturer specifications, exact-package identification, sourcing guidance, and engineering-focused usage guidance. It also distinguishes verified device capabilities from details that must be confirmed in the datasheet, helping engineers evaluate the MSP430F135IPAG before committing a 64-pin mixed-signal design to production.

直接替換替代品,適用於 MSP430F135IPAG — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MSP430F135IPAG (相同外形與佔位) — 差異在於 Flash Memory, Package, SRAM.

Texas Instruments
Flash Memory: 8 KB
Package: 64-pin TQFP (PAG), 10 mm × 10 mm
SRAM: 256 bytes
比較對象 MSP430F135IPAG →

此產品無可直接替換的替代品。

申請替代品

MSP430F135IPAG 最大額定值與電氣特性

Product Type Mixed-signal microcontroller
CPU Architecture 16-bit MSP430 CPU
最大時脈頻率 8 MHz
Flash Memory 16 KB
SRAM 512 B
ADC Resolution 12 bits
Comparator Integrated
SPI Interface Integrated
UART Interface 1 USART
封裝 64-pin TQFP (PAG), 10 mm x 10 mm
安裝類型 Surface mount

MSP430F135IPAG 64-pin tqfp (pag), 10 mm x 10 mm 腳位配置指南

MSP430F135IPAG(64-pin tqfp (pag), 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

MSP430F135IPAG 的 64-pin tqfp (pag), 10 mm x 10 mm 封裝腳位圖

無詳細腳位定義資料: MSP430F135IPAG.

請參閱 資料表 以查看完整腳位配置。

典型應用

MSP430F135IPAG 適用於 6 應用s: Industrial Sensor Node, Battery-Powered Data Logger, Building and Access Control, Process and Motor Monitoring, Portable Measurement Instrument, Communication Endpoint.

🏭

Industrial Sensor Node

MSP430F135IPAG fits industrial sensor nodes that need local analog measurement and low-power serial control in one device. Its 12-bit ADC can acquire sensor information, while the comparator can support threshold or alarm functions without another dedicated device. The 8 MHz 16-bit processor provides local filtering and control, and the SPI and UART interfaces can connect a sensor or radio. A 64-pin TQFP package also offers ample I/O for indicators, inputs, and field-bus circuitry. The design should provide clean analog grounding and follow the datasheet's ADC layout and decoupling recommendations.

🔋

Battery-Powered Data Logger

MSP430F135IPAG is appropriate for a compact, battery-powered data logger because it combines an MSP430 processor with the ADC, comparator, and serial interfaces needed for autonomous measurement. Firmware can sample analog inputs, store operational data in 16 KB of flash, and transfer records through SPI or UART during a service interval. The controller's low-power MSP430 architecture supports designs that spend most of their time waiting rather than processing continuously. Final battery-life estimates depend on the selected sleep mode, wake-up frequency, sensor load, flash-retention requirement, and regulator efficiency.

🏠

Building and Access Control

MSP430F135IPAG can serve as the central controller in a building-access or environmental-control module. Its integrated comparator handles simple threshold decisions, the 12-bit ADC supports analog sensing, and UART or SPI provides links to card readers, display modules, or remote controllers. Sixteen kilobytes of flash is sufficient for compact protocol and control firmware, while 512 B of SRAM supports short-term buffering. The 64-pin TQFP footprint leaves room for external relays, indicator drivers, and communication circuitry. Firmware and security requirements should be reviewed before adapting the MCU to an access-control role.

⚙️

Process and Motor Monitoring

MSP430F135IPAG suits compact process-monitoring equipment where a controller must observe analog process values and report operating status. The 12-bit ADC can acquire sensor signals, the comparator can establish independent thresholds, and the 8 MHz 16-bit CPU can perform scaling, filtering, and control calculations. SPI can connect to a local display or storage device, while UART can provide a maintenance or supervisory link. The integrated peripherals reduce the component count around the controller. For motor-driven or high-energy circuits, maintain separation between the MSP430 signal ground and switching-power paths, and include appropriate protection outside the MCU.

🧰

Portable Measurement Instrument

MSP430F135IPAG is a strong fit for a portable measurement instrument that combines a numeric sensor output, local control, and a wired interface. The ADC accepts the measurement signal, the comparator supports range or limit detection, and the 16-bit processing core performs calibration and conversion before data is displayed or transmitted. SPI supports faster local peripherals, while UART offers a simple connection to a host or configuration tool. The TQFP package is practical for a mixed-signal board requiring numerous digital and analog connections. Calibration storage, analog reference design, and low-power behavior should be established using the manufacturer's characterization information.

🌐

Communication Endpoint

MSP430F135IPAG can act as a compact protocol endpoint when a system needs to translate between analog measurements and an embedded serial link. The integrated UART supports a straightforward asynchronous connection, while SPI offers a synchronous interface for radios, memory, or display peripherals. The 12-bit ADC and comparator let the same device perform local sensing before data is transmitted, reducing the need for separate interface devices. Sixteen kilobytes of flash can hold compact protocol and application firmware, and 512 B of SRAM supports packet buffering. Protocol timing, interrupt latency, and peripheral sharing must be verified against the selected system clock and board topology.

What are the key specifications of MSP430F135IPAG that engineers should know?
The MSP430F135IPAG is an 8 MHz, 16-bit mixed-signal MCU with 16 KB of flash, 512 B of SRAM, a 12-bit ADC, an integrated comparator, SPI, and UART. According to the Texas Instruments product page, it is offered in a 64-pin TQFP (PAG) package measuring 10 mm by 10 mm. These resources make it suitable for compact embedded systems that combine analog measurement, local control, and serial communications.
What is the operating voltage range of MSP430F135IPAG?
The operating voltage range must be confirmed from the MSP430F135 manufacturer datasheet before power-supply design. The Texas Instruments product page identifies the device as an 8 MHz MCU with 16 KB flash, 512 B SRAM, a 12-bit ADC, comparator, SPI, and UART, but it does not expose the requested voltage limits in the cited content. Use the datasheet's recommended operating conditions and absolute-maximum tables for regulator selection.
Where can I download the MSP430F135IPAG datasheet PDF?
The official MSP430F135 datasheet is accessible through the Texas Instruments product page at https://www.ti.com/product/MSP430F135. The MSP430F135IPAG orderable entry is identified on the linked part-details page at https://www.ti.com/product/MSP430F135/part-details/MSP430F135IPAG. These official pages provide the electrical characteristics, pin assignments, ordering information, and application guidance needed for design review.
Where can I find the MSP430F135IPAG pinout?
The MSP430F135IPAG pinout is defined by the Texas Instruments MSP430F135 datasheet and the package pin-assignment diagram in its 64-pin TQFP (PAG) section. The manufacturer orderable listing confirms that MSP430F135IPAG uses a 64-pin TQFP package. Use the datasheet pin table when assigning analog inputs, serial functions, reset, clock, supply, and ground connections rather than relying on a generic package drawing.
Where can I buy MSP430F135IPAG online?
Use the Request a Quote form on this page to request MSP430F135IPAG availability, lead time, and order quantities. The exact MPN is also indexed by the Texas Instruments orderable-parts page and by authorized distribution channels, but live inventory changes quickly. Submit the required quantity, packaging preference, and target delivery location so the current commercial response can be matched to your production schedule.
What is the price of MSP430F135IPAG?
Use the Request a Quote form on this page for the current MSP430F135IPAG commercial response. The live price depends on order quantity, requested delivery date, and packaging availability, so a static figure can become stale. The quote form lets you specify the exact 64-pin TQFP (PAG) MPN, quantity, and target date without relying on an outdated catalog amount.
What is the lead time for MSP430F135IPAG?
The current lead time for MSP430F135IPAG must be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, backorder status, and production scheduling. The Texas Instruments product page identifies MSP430F135IPAG as an orderable member of the MSP430F135 family, while the request flow allows buyers to state the required quantity and required delivery date.
Is MSP430F135IPAG in stock?
Current MSP430F135IPAG stock should be requested through the Request a Quote form on this page. The listing text indicates an in-stock component, but inventory is time-sensitive and should not be treated as a guaranteed allocation. Include your required quantity and target date so the response reflects current purchasable supply rather than a historical listing status.
MSP430F135IPAG vs MSP430F133IPMR - which is better for an embedded design?
MSP430F135IPAG is the stronger choice when the design specifically requires its 16 KB flash, 512 B SRAM, 12-bit ADC, comparator, SPI, UART, and 64-pin TQFP footprint. MSP430F133IPMR is a different package and device variant whose detailed resources must be checked independently; it is not a same-footprint drop-in substitute for this target. Choose by validating memory, analog peripherals, serial interfaces, pin availability, and board geometry.
When should I choose MSP430F135IPAG over another MSP430 variant?
Choose MSP430F135IPAG when the board requires an 8 MHz 16-bit MCU with 16 KB flash, 512 B SRAM, a 12-bit ADC, comparator, SPI, UART, and a 64-pin TQFP footprint. The manufacturer identifies this combination specifically for MSP430F135IPAG. Select another variant when its pin count, package, memory, peripheral mix, temperature range, or interface set offers a closer match to the existing design.
Is MSP430F135IPAG suitable for battery-powered sensor nodes?
MSP430F135IPAG is suitable for battery-powered sensor nodes when low-power operation is important because it combines an MSP430 16-bit controller with integrated ADC, comparator, SPI, and UART resources. The manufacturer positions the MSP430 family around ultralow-power applications. Actual battery-life performance depends on the selected operating mode, clock configuration, analog circuitry, duty cycle, and leakage of the complete board.
What can replace MSP430F135IPAG?
No distinct drop-in replacement is established for MSP430F135IPAG by the available manufacturer and cross-reference information. A valid replacement must match the 64-pin TQFP (PAG) footprint, pin functions, 16-bit instruction compatibility, memory resources, analog peripherals, clocking, and electrical limits. Treat other MSP430 devices, smaller QFN packages, and parts with different peripheral mixes as redesign candidates rather than drop-in replacements.
What is the best cross-brand equivalent for MSP430F135IPAG?
No cross-brand drop-in equivalent is established for MSP430F135IPAG in the available cross-reference information. Because MSP430 firmware depends on its instruction set, memory map, peripherals, and interrupt behavior, a similarly packaged MCU is not automatically interchangeable. Any cross-brand candidate requires a complete hardware and software compatibility review, including boot code, peripheral drivers, timing, and mixed-signal performance.
How much power does MSP430F135IPAG consume?
The operating current and low-power-mode consumption of MSP430F135IPAG must be taken from the manufacturer datasheet for the relevant voltage, clock, and mode. The device combines an 8 MHz MSP430 CPU with an ADC, comparator, SPI, and UART, so board demand includes both the MCU and external analog support circuitry. Use the datasheet current tables rather than inferring consumption from the clock frequency alone.
Does MSP430F135IPAG support RoHS and automotive qualification?
The RoHS and AEC-Q100 status of MSP430F135IPAG must be confirmed in the Texas Instruments product documentation and the current declaration files. The manufacturer product page provides quality, ordering, and compliance information for the MSP430F135 family, but the cited content does not state the exact qualification result for this orderable MPN. Do not assume automotive qualification from the industrial product family alone.

工程參考資料,適用於 MSP430F135IPAG — 比較、設計指引及合規資訊。

選型指南

Choose MSP430F135IPAG when a design specifically calls for an 8 MHz 16-bit MSP430 controller with 16 KB flash, 512 B SRAM, a 12-bit ADC, comparator, SPI, UART, and a 64-pin TQFP (PAG) footprint. It is particularly suitable for compact measurement, sensor-node, logging, and process-monitoring products where integrated analog and serial resources reduce board complexity. Choose another MSP430 variant if its package size, I/O count, memory, peripheral set, or qualification better matches the design. Do not use MSP430F135IPMR as a drop-in substitute: its QFN package requires different PCB land patterns and pad assignment. No cross-brand drop-in alternative is established because replacing an MSP430 also requires validation of firmware, interrupts, memory map, peripherals, electrical limits, and mixed-signal behavior.

主要差異化特點

  • Integrated mixed-signal resource set (對比MSP430F133IPMR)
  • Package-specific board implementation (對比MSP430F135IPMR)
  • Integrated communication and conversion (對比MSP430F133IPMR)

設計說明

Route analog inputs away from digital clocks, serial edges, and switching-converter nodes. Use the manufacturer's recommended analog-ground and supply connections, place the required bypass capacitors close to their designated pins, and avoid long traces beneath or beside sensitive ADC inputs. The 10 mm by 10 mm TQFP footprint has fine-pitch leads, so verify annular rings, solder-mask clearance, and paste stencil apertures against the current land pattern.

Design the supply network for both active-current peaks and low-current standby operation. Confirm the allowed supply range, decoupling values, and power sequencing requirements in the manufacturer datasheet before selecting regulators or bulk capacitance. Separate analog and digital supply paths where the recommended application circuit permits it, and account for transients generated by external relays, radio modules, or actuators connected to the MCU board.

Do not treat another MSP430 model as a drop-in replacement solely because it uses a similar package or belongs to the same family. Check the 64-pin TQFP (PAG) footprint, every multiplexed pin, ADC channels, timer resources, serial interfaces, interrupt vectors, memory size, clock configuration, and device-specific register behavior. Rebuild the board and firmware validation plan for any different device, even when the nominal flash and SRAM sizes appear similar.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The available manufacturer page and distributor snippets do not state the exact compliance status of MSP430F135IPAG. Consult the current TI product documentation and applicable declaration files before making a compliance determination.

相關搜尋

MSP430F135IPAG datasheet MSP430F135IPAG pinout MSP430F135IPAG datasheet pdf MSP430F135IPAG specifications MSP430F135IPAG 64 TQFP MSP430F135IPAG price MSP430F135IPAG stock Texas Instruments MSP430F135IPAG MSP430F135IPAG replacement MSP430F135IPAG equivalent MSP430F135IPAG vs MSP430F133IPMR MSP430F135IPAG application circuit MSP430F135 8MHz 16KB flash MCU MSP430F135IPAG ADC comparator SPI UART

相關元件與詞彙

Texas Instruments MSP430F135IPAG MSP430F135 MSP430F133IPMR MSP430F135IPMR MSP430 mixed-signal microcontroller microcontroller embedded processor semiconductor 16-bit RISC CPU 12-bit ADC comparator SPI UART USART flash memory SRAM TQFP-64 PAG package surface mount industrial sensor node battery-powered data logger process monitoring
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情