Texas Instruments

MSP430F2617TPN - 16MHz Mixed-Signal MCU | Texas Instruments

部品番号: MSP430F2617TPN ✓ 生産中
80-pin LQFP, 12 mm x 12 mm Package 16 MHz Speed 92 KB (92K x 8 + 256 B) Memory
MOQ: 1 |

MSP430F2617TPN 概要

Texas Instruments MSP430F2617TPN is a 16 MHz mixed-signal microcontroller with 92 KB of Flash memory, 8 KB of SRAM, a 12-bit ADC, dual 12-bit DACs, I2C, SPI, UART, hardware multiplier, and DMA in an 80-pin LQFP package. The MSP430F2617 belongs to the MSP430F2xx family of ultra-low-power RISC microcontrollers, combining a 16-bit CPU with mixed-signal peripherals for portable measurement and control systems.

An MSP430 mixed-signal microcontroller integrates a low-power digital processing core with analog conversion resources and serial communication peripherals. In the power-management hierarchy, the MSP430 architecture is designed to support battery-operated and portable measurement applications. The MSP430F2617 combines a 16-bit RISC CPU, 16-bit registers, constant-memory processing features, and five low-power modes to balance measurement accuracy, response time, and energy efficiency.

Key features include a 16 MHz operating frequency, 92 KB Flash organized as 92K x 8 plus 256 bytes, and 8 KB of SRAM. The integrated 12-bit ADC supports analog measurement, while the dual 12-bit DACs provide two controllable analog outputs. I2C, SPI, and UART interfaces connect the device to sensors, transceivers, memory, and host systems. A hardware multiplier accelerates arithmetic operations, and DMA reduces CPU intervention during data transfers.

The device is intended for applications requiring more analog and serial resources than a basic MSP430 design, but without the memory and processing demands of a high-end application processor. Its 16-bit RISC architecture, on-chip DMA, and mix of ADC, DAC, and communication interfaces make it useful in industrial instrumentation, sensor acquisition, signal conditioning, and embedded control products.

Typical uses include portable measurement instruments, industrial sensor nodes, low-power data loggers, actuator controllers, and embedded laboratory equipment. For a new design, engineers should confirm the exact pin assignment, electrical limits, and recommended decoupling configuration against the Texas Instruments MSP430F2617 datasheet before layout release.

A particularly important design consideration is that the MCU’s low-power capability depends on correct peripheral clock configuration, sleep-mode entry, and board-level leakage control. Keep analog and digital return paths separated where possible, place the required bypass capacitors close to the supply pins, and validate the final noise performance with the actual sensor and communication circuitry.

This product page combines the confirmed MSP430F2617TPN specifications, package information, practical application guidance, and engineering-focused comparisons to support faster component selection and PCB design planning.

ドロップイン代替品: MSP430F2617TPN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MSP430F2617TPN (同一形状・フットプリント) — 相違点: ADC Resolution, CPU Architecture, Flash Memory, Hardware Multiplier, Low-Power Modes.

Texas Instruments
ADC Resolution: 12 bits
CPU Architecture: MSP430 CPU16 RISC
Flash Memory: 92 KB
比較対象 MSP430F2617TPN →

MSP430F2616TPN

✅ ドロップイン
Texas Instruments
📦 80-LQFP (12x12)
16-bit RISC · 16 MHz · 92 KB · 4 KB · 12 bit · 12 bit · 2 channels · I2C, SPI, and UART

価格はお問い合わせください

データシートを見る →

MSP430F2417TPN

✅ ドロップイン
Texas Instruments
📦 80-LQFP (12x12)
16-bit mixed-signal microcontroller · MSP430 CPU16 RISC · 16 MHz · 92 KB · 92K x 8 bits plus 256 bytes information Flash · 8 KB · 12 bits · 12-bit successive-approximation ADC

価格はお問い合わせください

データシートを見る →

MSP430F2617TPN 最大定格&電気的特性

CPU Architecture 16-bit RISC
最大クロック周波数 16 MHz
Flash Memory 92 KB (92K x 8 + 256 B)
SRAM 8 KB
ADC Resolution 12 bit
ADC Quantity 1
DAC Resolution 12 bit
DAC Quantity 2
Serial Interfaces I2C, SPI, UART
DMA Yes
Hardware Multiplier Yes
Low-Power Modes 5
パッケージ 80-pin LQFP, 12 mm x 12 mm
実装タイプ Surface Mount

MSP430F2617TPN 80-pin lqfp, 12 mm x 12 mm ピン配置ガイド

MSP430F2617TPN (80-pin lqfp, 12 mm x 12 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MSP430F2617TPN の 80-pin lqfp, 12 mm x 12 mm パッケージピン配置図

詳細なピン配置データはありません: MSP430F2617TPN.

詳細は データシート をご参照ください。

主な用途

MSP430F2617TPN の用途: 6 件s: Portable Data Logger, Industrial Sensor Node, Precision Signal Conditioning, Laboratory Test Equipment, Actuator Control, Low-Power Embedded Control.

📱

Portable Data Logger

The MSP430F2617TPN fits portable data loggers because its 16 MHz RISC core can process data while the five low-power modes support duty-cycled operation. The 92 KB Flash and 8 KB SRAM provide room for firmware, calibration tables, and buffered measurements. A 12-bit ADC supports sensor acquisition, while DMA helps transfer samples without tying the CPU to every register access. The 80-pin LQFP provides access to the device’s mixed-signal and serial resources. Battery life still depends on sensor load, active duration, standby leakage, and the chosen regulator, so validate the complete duty cycle rather than assuming a fixed runtime.

🏭

Industrial Sensor Node

For industrial sensor nodes, the MSP430F2617TPN combines a 12-bit ADC, dual 12-bit DACs, and I2C, SPI, and UART interfaces in one 80-pin LQFP device. The ADC can acquire analog sensor signals, the DACs can provide controllable analog outputs, and the serial interfaces can connect local sensors or downstream controllers. The hardware multiplier and DMA support efficient signal processing and data movement. In an industrial enclosure, thermal conditions, grounding, isolation strategy, and communication robustness remain important because the MCU rating alone does not determine full-system accuracy or compliance.

🔧

Precision Signal Conditioning

The MSP430F2617TPN is suitable for precision signal-conditioning products that require acquisition, control output, and configurable communications in a compact controller. The 12-bit ADC supports measurement channels, the dual 12-bit DACs can generate reference or excitation signals, and DMA can support repeatable sample movement. Its 16 MHz processing rate provides useful headroom for calibration and filtering while retaining the low-power characteristics of the MSP430 architecture. Board-level design should include clean analog grounding, careful reference routing, and measured filtering because converter performance in the finished product can be affected by source impedance, noise, and power-supply coupling.

📺

Laboratory Test Equipment

The MSP430F2617TPN can serve as the control core of compact laboratory instruments because it integrates a 16 MHz CPU, ADC, dual DACs, DMA, and multiple serial interfaces. The ADC can capture test or sensor waveforms, the DACs can generate stimulus signals, and UART or SPI can connect to a host or display subsystem. Its 92 KB Flash supports a substantial firmware image and calibration data, while 8 KB SRAM accommodates working buffers. Precision results depend on analog reference quality, layout symmetry, calibration, and the external measurement chain; use the manufacturer’s application guidance when developing precision timing or acquisition paths.

⚡

Actuator Control

The MSP430F2617TPN fits actuator-control subsystems that need local analog output, sensor feedback, and serial coordination. The dual 12-bit DACs can create controllable setpoints or drive external analog stages, while the 12-bit ADC monitors feedback from a sensor. I2C and SPI support local peripheral access, and UART can carry supervisory commands. The controller’s five low-power modes can reduce consumption when the actuator is idle, although power-stage losses, driver topology, and protection requirements may dominate system consumption. Validate settling time, output range, and fault response together with the external driver circuitry.

🧩

Low-Power Embedded Control

The MSP430F2617TPN is appropriate for embedded controllers where periodic sensing, computation, and communication must coexist with low standby consumption. Its 16-bit RISC core, hardware multiplier, DMA support, and five low-power modes provide a practical balance between throughput and energy use. The 80-pin LQFP exposes the analog and serial resources needed for a compact mixed-signal design. Firmware should use the device’s recommended idle and shutdown procedures, disable unused peripherals, and schedule conversion and serial activity carefully. Real battery-current measurements are essential because analog sensor bias, pull resistors, LEDs, regulators, and leakage outside the MCU can dominate total consumption.

What is the MSP430F2617TPN?
The MSP430F2617TPN is a Texas Instruments 16 MHz mixed-signal MCU with 92 KB Flash, 8 KB SRAM, a 12-bit ADC, dual 12-bit DACs, I2C, SPI, UART, DMA, and a hardware multiplier. According to the Texas Instruments MSP430F2617 product page, the device is packaged as MSP430F2617TPN in an 80-pin LQFP measuring 12 mm by 12 mm. Its combination of low-power processing and integrated analog conversion makes it suitable for portable measurement and industrial control systems.
What are the key specifications of MSP430F2617TPN?
The MSP430F2617TPN operates at up to 16 MHz and provides 92 KB Flash plus 8 KB SRAM. Its principal mixed-signal resources include a 12-bit ADC, two 12-bit DACs, and I2C, SPI, and UART serial interfaces. The manufacturer also identifies hardware multiplier and DMA support, along with five low-power modes. According to Texas Instruments, the device targets ultra-low-power measurement applications requiring mixed-signal acquisition and control in one MCU.
Where can I download the MSP430F2617TPN datasheet PDF?
The MSP430F2617TPN datasheet is available through the official Texas Instruments MSP430F2617 datasheet link on this page, identified by the document title MSP430F261x, MSP430F241x Mixed-Signal Microcontrollers datasheet. The document covers the MSP430F2617 family and includes pin descriptions, electrical characteristics, application information, and peripheral guidance. Use the manufacturer document for design sign-off because third-party PDF copies may lag the latest revision.
Where can I find the MSP430F2617TPN pinout?
Use the pin-description table and package drawing in the official Texas Instruments MSP430F2617 datasheet to locate every MSP430F2617TPN connection. The exact TPN orderable device uses an 80-pin LQFP package measuring 12 mm by 12 mm. The package diagram on this page does not render an 80-pin LQFP because the supported package library does not contain a matching 80-pin LQFP drawing, so engineers should not infer pin locations from a smaller LQFP footprint.
Is MSP430F2617TPN suitable for battery-powered measurement devices?
The MSP430F2617TPN is suitable for battery-powered measurement devices because its MSP430 architecture includes five low-power modes and is optimized for portable measurement. The 16-bit RISC CPU can process acquired data while peripherals such as the ADC, DAC, and serial interfaces support a compact sensor-to-digital-system design. Actual battery life depends on the selected operating mode, sensor duty cycle, analog circuitry, leakage, and regulator efficiency, so the complete system configuration must be measured.
What is the difference between MSP430F2617TPN and MSP430F2616TPN?
Both devices are listed as 80-pin LQFP members of the MSP430F2xx mixed-signal family, but they are not identical orderable products. The MSP430F2617TPN is specifically identified as a 16 MHz device with 92 KB Flash, 8 KB SRAM, one 12-bit ADC, dual 12-bit DACs, I2C, SPI, UART, DMA, and a hardware multiplier. Before using MSP430F2616TPN as a substitute, verify its pin functions, memory, analog resources, and operating limits against the MSP430F2617 datasheet.
When should I choose MSP430F2617TPN over MSP430F2417TPN?
Choose the MSP430F2617TPN when the design benefits from its identified 16 MHz performance, 92 KB Flash, 8 KB SRAM, 12-bit ADC, dual 12-bit DACs, DMA, and hardware multiplier. The MSP430F2417TPN appears in the same 80-pin LQFP family, but it belongs to a related controller line and should not be assumed to be electrically identical. Select it only after checking package pins, memory requirements, analog-channel assignments, serial multiplexing, and firmware peripheral compatibility.
What can replace MSP430F2617TPN?
No fully documented cross-manufacturer drop-in replacement was established for the MSP430F2617TPN. A practical same-family candidate is MSP430F2616TPN because it is listed in an 80-pin LQFP package, but a footprint match alone does not guarantee pin-to-pin compatibility. Verify every power, ground, analog, and communications connection against the manufacturer datasheet, then confirm that firmware and peripheral assignments remain valid before approving a replacement.
Is MSP430F2617TPN the same as MSP430F2617TPNR?
The MSP430F2617TPN and MSP430F2617TPNR are electrically related orderable versions of the same MSP430F2617 device, with the suffix primarily distinguishing ordering and shipping format rather than a different MCU architecture. A replacement still requires verification of the exact reel or tray handling, markings, and procurement configuration. The manufacturer package and device documentation should be used for production programming, labeling, and inspection controls.
MSP430F2617TPN vs MSP430F2417TPN - which is better for a portable meter?
The MSP430F2617TPN is the stronger initial candidate for a portable meter that needs two 12-bit DAC outputs, DMA, a hardware multiplier, 92 KB Flash, and 8 KB SRAM. The MSP430F2417TPN may suit designs requiring fewer analog or processing resources, but its exact electrical and pin compatibility must be confirmed. For either device, validate low-power behavior, analog accuracy, noise, and battery load under the real sensor and display load.
Where can I buy MSP430F2617TPN online?
Use the Request a Quote form on this page to request MSP430F2617TPN availability, order quantities, and current commercial terms. The part is an 80-pin LQFP mixed-signal MCU from Texas Instruments, so confirm the exact TPN suffix, packaging format, and date-code requirements in the quotation. The manufacturer product page remains the authoritative source for ordering options and current product information.
What is the price of MSP430F2617TPN?
Current commercial pricing for the MSP430F2617TPN is presented through the Request a Quote form on this page. Submit the required quantity, package or shipping format, and target date to obtain an up-to-date quotation. Because distributor inventory and commercial terms can change, use the quotation rather than a historical catalog amount for budgeting, purchase orders, or production planning.
What is the lead time for MSP430F2617TPN?
Request the current lead time for MSP430F2617TPN through the Request a Quote form on this page. Include your required quantity, approved vendor list, delivery location, and expected production schedule. The manufacturer product page identifies the MSP430F2617 family and its ordering information, while the quotation response should confirm current availability and any volume or packaging constraints.
Is MSP430F2617TPN in stock?
Current MSP430F2617TPN stock should be confirmed through the Request a Quote form on this page. Include the required order quantity and the intended reel, tray, or other shipping configuration. A listing that indicates availability does not guarantee inventory at a future order date, so purchasing teams should base production commitments on a formal quotation and any assigned date-code requirements.
Does MSP430F2617TPN support DMA, ADC, and DAC at the same time?
The MSP430F2617TPN includes DMA, a 12-bit ADC, and dual 12-bit DACs according to the Texas Instruments product information. DMA can move data between memory and peripherals with reduced CPU intervention, allowing acquisition and communication routines to continue efficiently. Exact concurrency, trigger behavior, and peripheral timing must be configured from the MSP430F2617 family user’s guide and verified in the selected operating mode.

エンジニアリング参考データ: MSP430F2617TPN — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the MSP430F2617TPN when a compact 80-pin LQFP design needs a 16 MHz MSP430 core, 92 KB Flash, 8 KB SRAM, a 12-bit ADC, two 12-bit DACs, DMA, a hardware multiplier, and I2C, SPI, and UART interfaces. It is especially suitable for portable instruments, sensor nodes, signal-conditioning equipment, and mixed-signal controllers with five available low-power modes. Consider the MSP430F2616TPN only after checking its pin functions and peripheral configuration against the MSP430F2617 documentation. Consider the MSP430F2417TPN when its related-family resources satisfy the design and its exact electrical ratings match. Do not approve a substitute solely from the shared 80-LQFP outline: verify power, ground, analog inputs, DAC outputs, serial multiplexing, firmware dependencies, and package drawing before release.

代替品との比較

パラメータ この製品 MSP430F2616TPN MSP430F2417TPN
Brand Texas Instruments Texas Instruments Texas Instruments
Package 80-LQFP (12x12) 80-LQFP (12x12) 80-LQFP (12x12)
Flash Memory 92 KB (92K x 8 + 256 B) 92 KB per cross-reference listing 92 KB per cross-reference listing

主な差別化要因

  • Integrated dual DAC capability (vs MSP430F2616TPN)
  • Higher-memory mixed-signal integration (vs MSP430F2417TPN)
  • Dedicated high-speed data movement (vs MSP430F2417TPN)

設計ノート

Use the Texas Instruments MSP430F2617 datasheet for the complete 80-pin LQFP footprint, pin assignments, and recommended decoupling network. Place required supply capacitors at the associated power pins with short, low-inductance traces, and route analog inputs away from digital clocks and switching nodes. Do not reuse a 64-pin LQFP land pattern because the TPN package has a different pin count and lead arrangement.

Separate analog and digital return paths as far as practical, provide a quiet ground reference for the ADC and DACs, and keep sensor traces away from high-current switching nodes. Verify reference-voltage stability and source impedance because converter accuracy can be affected by acquisition timing and external filtering. The dual 12-bit DAC outputs should be routed according to the manufacturer’s output-capacitance and stability guidance.

The MSP430 architecture can reduce consumption through its five low-power modes, but effective battery life depends on firmware and board behavior. Disable unused peripherals, control sensor bias current, and avoid keeping GPIO states that create static leakage paths. Measure average current across acquisition, processing, communication, and idle phases because the 16 MHz CPU may increase current while active.

Configure the 12-bit ADC for the required source impedance and acquisition time, and validate the resulting noise and linearity with the final sensor network. DMA can improve sample throughput and reduce CPU jitter, but buffer overruns or incorrectly programmed triggers can still corrupt captured data. Confirm peripheral clocks, trigger routing, and interrupt timing in the MSP430F2617 family user’s guide.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Compliance status was not established in the cited product and distributor information. Use the current Texas Instruments product documentation and applicable declarations for production qualification.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

MSP430F2617TPN datasheet MSP430F2617TPN datasheet pdf MSP430F2617TPN pinout MSP430F2617TPN footprint MSP430F2617TPN equivalent MSP430F2617TPN replacement MSP430F2617TPN price MSP430F2617TPN stock Texas Instruments MSP430F2617TPN MSP430F2617 16MHz 92KB Flash MSP430F2617TPN vs MSP430F2616TPN MSP430F2617TPN LQFP application circuit

関連部品&用語

Texas Instruments MSP430F2617TPN MSP430F2617 MSP430F2616TPN MSP430F2417TPN MSP430F2xx mixed-signal microcontroller microcontroller 16-bit RISC CPU ultra-low-power MCU semiconductor 12-bit ADC dual 12-bit DAC Direct Memory Access DMA hardware multiplier I2C SPI UART 80-pin LQFP LQFP family surface mount SMD five low-power modes portable measurement
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示