MSP430F2619TPM - 16MHz Mixed-Signal MCU | Texas Instruments
部品番号: MSP430F2619TPM ✓ 生産中MSP430F2619TPM 概要
A mixed-signal microcontroller combines a digital processor with analog conversion and comparison functions on one integrated circuit. The MSP430 belongs to the microcontroller hierarchy and uses a 16-bit RISC architecture optimized for compact code, interrupt-driven control, and battery-powered measurement. The MSP430F2619TPM therefore serves as a central controller for portable instrumentation, industrial sensing, communications, and embedded data-acquisition systems.
Its principal features include a 16 MHz clock, 120 KB flash, 4 KB SRAM, a fast 12-bit ADC, dual 12-bit DACs, a comparator, hardware multiplier, DMA, and four USCI modules supporting UART, SPI, and I2C. AES support adds hardware-assisted cryptographic capability, while the five low-power modes help reduce energy consumption when the system is not processing samples continuously.
The mixed-signal architecture allows analog measurements, digital control, and serial communications to share one device. The ADC and DAC provide 12-bit resolution, while DMA moves data without requiring the CPU to handle every transfer manually. The hardware multiplier supports efficient multiply-accumulate operations, and the RISC CPU architecture improves code density compared with many higher-complexity processor architectures.
Typical uses include portable measurement instruments, battery-powered sensor nodes, industrial condition-monitoring equipment, medical imaging systems, and connected industrial-control products. The available communications peripherals support host links or sensor networks, while the 64-pin LQFP package provides more I/O than smaller packages without requiring a very large board footprint.
PCB design should preserve short analog traces, provide clean grounding around the converter, and follow the manufacturer’s decoupling and layout guidance. Designers should also verify the exact 64-pin signal assignments, external clock options, and unused-pin requirements in the MSP430F261x family datasheet before releasing the PCB.
This product page combines the core device specifications, package details, drop-in family options, selection guidance, and implementation-oriented design notes to support faster engineering evaluation and sourcing decisions.
ドロップイン代替品: MSP430F2619TPM — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: MSP430F2619TPM (同一形状・フットプリント) — 相違点: Flash Memory, Low-Power Modes, Package, SRAM.
MSP430F2618TPM
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2617TPM
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2616TPM
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →MSP430F2419TPM
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2418TPM
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品(カタログ未掲載)
MSP430F2619TPM 最大定格&電気的特性
| CPU Architecture | 16-bit RISC |
| 最大クロック周波数 | 16 MHz |
| Flash Memory | 120 KB |
| SRAM | 4 KB |
| ADC Resolution | 12 bits |
| DAC Resolution | 12 bits |
| DAC Count | 2 |
| Comparator Count | 1 |
| USCI Module Count | 4 |
| Supported Serial Interfaces | UART, SPI, I2C |
| DMA Support | Yes |
| Hardware Multiplier | Yes |
| Cryptographic Support | AES |
| Low-Power Modes | 5 modes |
| Maximum I/O Pins | 64 pins |
| パッケージ | 64-pin LQFP, 10 mm x 10 mm |
| 実装タイプ | Surface mount |
MSP430F2619TPM 64-pin lqfp, 10 mm x 10 mm ピン配置ガイド
MSP430F2619TPM (64-pin lqfp, 10 mm x 10 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。
詳細なピン配置データはありません: MSP430F2619TPM.
詳細は データシート をご参照ください。
主な用途
MSP430F2619TPM の用途: 6 件s: Portable Measurement Instrument, Industrial Sensor Node, Medical Imaging Equipment, Data Acquisition System, Communications Controller, Embedded Control System.
Portable Measurement Instrument
The MSP430F2619TPM fits portable analyzers because its 16 MHz 16-bit RISC CPU can process control and acquisition tasks while the 12-bit ADC, comparator, and dual 12-bit DACs support analog front ends. DMA can transfer samples efficiently, and the five low-power modes help conserve energy between measurements. The 120 KB flash also provides room for calibration data, menus, and signal-processing firmware. A battery-focused design should still evaluate the actual duty cycle, active peripherals, and regulator efficiency because processor speed alone does not determine battery life.
おすすめ
Industrial Sensor Node
The MSP430F2619TPM is suitable for industrial sensor nodes that require local ADC measurement, periodic digital processing, and a compact serial interface. Its four USCI modules can support UART, SPI, or I2C connections to sensors, transceivers, and external memory, while DMA reduces processor intervention during data movement. The 64-pin LQFP package exposes substantially more I/O than smaller MCU packages. Industrial deployments should include transient protection, proper grounding, watchdog strategy, and firmware recovery provisions rather than treating signal processing alone as sufficient for field reliability.
おすすめ
Medical Imaging Equipment
The MSP430F2619TPM can serve as a supervisory and mixed-signal controller in medical imaging equipment where low-power operation, deterministic peripheral handling, and compact packaging are important. Its 12-bit ADC, comparator, DAC channels, DMA, and four USCI modules support sensor acquisition, control signaling, and communication tasks. Texas Instruments identifies the LQFP package as available in a nonmagnetic configuration for medical imaging applications. Qualification, creepage, isolation, output-signal limits, and the applicable medical-device standards must be evaluated at the complete-system level.
おすすめ
Data Acquisition System
For a compact data-acquisition system, the MSP430F2619TPM provides a 12-bit ADC, DMA, substantial flash, 4 KB of SRAM, and multiple serial interfaces in one package. The RISC core can perform scaling, filtering, and control functions, while DMA reduces the interrupt burden associated with continuous sample movement. Four USCI modules allow the controller to connect to multiple sensors or storage devices without using all resources on a single bus. Analog input filtering, reference selection, acquisition timing, and buffer partitioning should be established from the family electrical characteristics.
おすすめ
Communications Controller
The MSP430F2619TPM can manage low-to-moderate-speed communications in connected industrial products because four USCI modules support UART, SPI, and I2C. The 16-bit CPU, hardware multiplier, DMA controller, and 120 KB flash support protocol processing, configuration storage, and logging alongside acquisition functions. Its low-power architecture is useful when radio or sensor activity is intermittent. Designers should budget USCI channels, interrupts, DMA descriptors, and timing margins early because simultaneous serial traffic can make a functionally capable MCU timing-bound without a deliberate resource plan.
おすすめ
Embedded Control System
The MSP430F2619TPM fits embedded control systems requiring analog input, programmable output, serial peripherals, and low-power standby behavior. The ADC can monitor process variables, the comparator can provide fast threshold events, and the dual DACs can generate analog control or test signals. The hardware multiplier assists with scaling and filtering, while DMA can service transfers in the background. For motor, valve, or high-current actuator control, the microcontroller should supervise external drivers rather than directly power loads, and safety limits should include shutdown states and watchdog recovery.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MSP430F2619TPM — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
Choose a lower-memory MSP430F261x TPM option only when its flash capacity and SRAM satisfy the firmware and application requirements. Consider MSP430F2419TPM or MSP430F2418TPM when DAC12 and DMA are unnecessary, because Texas Instruments identifies the F241x devices as otherwise identical to the F261x family but without those two blocks. Every candidate requires pin-by-pin validation, including supply voltage, clock configuration, peripheral multiplexing, interrupt behavior, and qualification needs.
代替品との比較
| パラメータ | この製品 | MSP430F2618TPM | MSP430F2617TPM | MSP430F2616TPM | MSP430F2419TPM | MSP430F2418TPM |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 64-pin LQFP (10 mm x 10 mm) | 64-pin LQFP (10 mm x 10 mm) | 64-pin LQFP (10 mm x 10 mm) | 64-pin LQFP (10 mm x 10 mm) | 64-pin LQFP (10 mm x 10 mm) | 64-pin LQFP (10 mm x 10 mm) |
| CPU Architecture | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC | 16-bit RISC |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| ADC Resolution | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits | 12 bits |
| DAC12 Support | Yes, dual 12-bit DAC | Yes | Yes | Yes | No | No |
| DMA Support | Yes | Yes | Yes | Yes | No | No |
| Serial Interfaces | UART, SPI, I2C | UART, SPI, I2C | UART, SPI, I2C | UART, SPI, I2C | UART, SPI, I2C | UART, SPI, I2C |
主な差別化要因
- Complete mixed-signal feature set includes two 12-bit DAC channels (vs MSP430F2419TPM)
- DMA support enables background data movement (vs MSP430F2419TPM)
- Large 120 KB flash capacity supports more consolidated firmware (vs MSP430F2618TPM)
- Four USCI modules provide flexible serial-interface allocation (vs MSP430F2419TPM)
設計ノート
Route analog inputs and references away from switching-power nodes and high-speed digital traces. Use the Texas Instruments MSP430F261x family layout guidance for supply decoupling, analog grounding, and external component placement. Keep the ADC and DAC paths short, provide a quiet reference arrangement, and place input filtering close to the device where practical.
Decouple each required supply rail at the corresponding device pins with the capacitance and voltage ratings specified in the family datasheet. Verify brownout, reset, and startup behavior across every supply combination supported by the design. Low-power mode can reduce energy use, but leakage from analog circuitry, pull networks, sensors, and communication devices may dominate standby consumption.
Do not treat a shared 64-pin footprint as automatic interchangeability. The MSP430F241x family lacks DAC12 and DMA, while lower-memory MSP430F261x options may not fit the existing firmware image. Before substitution, compare every used pin, peripheral instance, interrupt vector, flash image size, SRAM demand, timing, and supply condition, then perform firmware and hardware regression tests.
Assign USCI channels and DMA transactions during firmware planning rather than after PCB layout. Serial clocking, simultaneous communications, ADC sampling, and PWM or capture activity can interact through timers and interrupt latency. Use the family user’s guide and datasheet timing tables to establish channel multiplexing, DMA priorities, and worst-case servicing requirements.
コンプライアンス情報
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product and distributor records. Medical-imaging suitability of the nonmagnetic LQFP option does not by itself establish medical-device certification.