Texas Instruments

MSP430F2619TPM - 16MHz Mixed-Signal MCU | Texas Instruments

MPN: MSP430F2619TPM ✓ 啟用中
64-pin LQFP, 10 mm x 10 mm Package 16 MHz Speed 120 KB Memory
MOQ: 1 |

MSP430F2619TPM 概覽

The Texas Instruments MSP430F2619TPM is a 16 MHz mixed-signal microcontroller with 120 KB of flash memory, 4 KB of SRAM, a 12-bit ADC, AES support, DMA, comparator, and UART, SPI, and I2C interfaces in a 64-pin LQFP package. It combines a 16-bit RISC CPU with programmable analog and digital peripherals for compact, low-power embedded systems.

A mixed-signal microcontroller combines a digital processor with analog conversion and comparison functions on one integrated circuit. The MSP430 belongs to the microcontroller hierarchy and uses a 16-bit RISC architecture optimized for compact code, interrupt-driven control, and battery-powered measurement. The MSP430F2619TPM therefore serves as a central controller for portable instrumentation, industrial sensing, communications, and embedded data-acquisition systems.

Its principal features include a 16 MHz clock, 120 KB flash, 4 KB SRAM, a fast 12-bit ADC, dual 12-bit DACs, a comparator, hardware multiplier, DMA, and four USCI modules supporting UART, SPI, and I2C. AES support adds hardware-assisted cryptographic capability, while the five low-power modes help reduce energy consumption when the system is not processing samples continuously.

The mixed-signal architecture allows analog measurements, digital control, and serial communications to share one device. The ADC and DAC provide 12-bit resolution, while DMA moves data without requiring the CPU to handle every transfer manually. The hardware multiplier supports efficient multiply-accumulate operations, and the RISC CPU architecture improves code density compared with many higher-complexity processor architectures.

Typical uses include portable measurement instruments, battery-powered sensor nodes, industrial condition-monitoring equipment, medical imaging systems, and connected industrial-control products. The available communications peripherals support host links or sensor networks, while the 64-pin LQFP package provides more I/O than smaller packages without requiring a very large board footprint.

PCB design should preserve short analog traces, provide clean grounding around the converter, and follow the manufacturer’s decoupling and layout guidance. Designers should also verify the exact 64-pin signal assignments, external clock options, and unused-pin requirements in the MSP430F261x family datasheet before releasing the PCB.

This product page combines the core device specifications, package details, drop-in family options, selection guidance, and implementation-oriented design notes to support faster engineering evaluation and sourcing decisions.

直接替換替代品,適用於 MSP430F2619TPM — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: MSP430F2619TPM (相同外形與佔位) — 差異在於 Flash Memory, Low-Power Modes, Package, SRAM.

Texas Instruments
Flash Memory: 116 KB (116K x 8 + 256 bytes)
Low-Power Modes: 5
Package: 64-LQFP (10 mm x 10 mm)
比較對象 MSP430F2619TPM →

MSP430F2618TPM

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 64-pin LQFP (10 mm x 10 mm)
16-bit RISC · 16 MHz · 116 KB (116K x 8 + 256 bytes) · 8 KB · 12 bits · 12 bits · 2 · 2.2 V to 3.6 V

聯絡詢價

查看資料表 →

MSP430F2617TPM

✅ 直接替換 ⚠️ 規格未經驗證
📦 64-pin LQFP (10 mm x 10 mm)
Lower flash capacity than the 120 KB MSP430F2619TPM; the same MSP430F261x family and LQFP footprint are used.

📋 參考替代品(不在目錄中)

MSP430F2616TPM

✅ 直接替換 ⚠️ 規格未經驗證
Texas Instruments
📦 64-pin LQFP (10 mm x 10 mm)
16-bit RISC · 16 MHz · 92 KB · 4 KB · 12 bits · Dual 12-bit DAC · I2C, SPI, UART · Yes

聯絡詢價

查看資料表 →

MSP430F2419TPM

✅ 直接替換 ⚠️ 規格未經驗證
📦 64-pin LQFP (10 mm x 10 mm)
The MSP430F241x family omits DAC12 and DMA while otherwise matching the MSP430F261x mixed-signal architecture.

📋 參考替代品(不在目錄中)

MSP430F2418TPM

✅ 直接替換 ⚠️ 規格未經驗證
📦 64-pin LQFP (10 mm x 10 mm)
Lower flash capacity and no DAC12 or DMA compared with the 120 KB MSP430F2619TPM; the same 64-pin LQFP family is retained.

📋 參考替代品(不在目錄中)

MSP430F2619TPM 最大額定值與電氣特性

CPU Architecture 16-bit RISC
最大時脈頻率 16 MHz
Flash Memory 120 KB
SRAM 4 KB
ADC Resolution 12 bits
DAC Resolution 12 bits
DAC Count 2
Comparator Count 1
USCI Module Count 4
Supported Serial Interfaces UART, SPI, I2C
DMA Support Yes
Hardware Multiplier Yes
Cryptographic Support AES
Low-Power Modes 5 modes
Maximum I/O Pins 64 pins
封裝 64-pin LQFP, 10 mm x 10 mm
安裝類型 Surface mount

MSP430F2619TPM 64-pin lqfp, 10 mm x 10 mm 腳位配置指南

MSP430F2619TPM(64-pin lqfp, 10 mm x 10 mm 封裝)的腳位配置。 此數位 IC 包含 GPIO、通訊介面(UART、SPI、I2C)與電源腳位。替代腳位功能與配置選項請參閱製造商資料表。對嵌入式系統設計與 PCB 佈局至關重要。

MSP430F2619TPM 的 64-pin lqfp, 10 mm x 10 mm 封裝腳位圖

無詳細腳位定義資料: MSP430F2619TPM.

請參閱 資料表 以查看完整腳位配置。

典型應用

MSP430F2619TPM 適用於 6 應用s: Portable Measurement Instrument, Industrial Sensor Node, Medical Imaging Equipment, Data Acquisition System, Communications Controller, Embedded Control System.

🔧

Portable Measurement Instrument

The MSP430F2619TPM fits portable analyzers because its 16 MHz 16-bit RISC CPU can process control and acquisition tasks while the 12-bit ADC, comparator, and dual 12-bit DACs support analog front ends. DMA can transfer samples efficiently, and the five low-power modes help conserve energy between measurements. The 120 KB flash also provides room for calibration data, menus, and signal-processing firmware. A battery-focused design should still evaluate the actual duty cycle, active peripherals, and regulator efficiency because processor speed alone does not determine battery life.

🏭

Industrial Sensor Node

The MSP430F2619TPM is suitable for industrial sensor nodes that require local ADC measurement, periodic digital processing, and a compact serial interface. Its four USCI modules can support UART, SPI, or I2C connections to sensors, transceivers, and external memory, while DMA reduces processor intervention during data movement. The 64-pin LQFP package exposes substantially more I/O than smaller MCU packages. Industrial deployments should include transient protection, proper grounding, watchdog strategy, and firmware recovery provisions rather than treating signal processing alone as sufficient for field reliability.

💊

Medical Imaging Equipment

The MSP430F2619TPM can serve as a supervisory and mixed-signal controller in medical imaging equipment where low-power operation, deterministic peripheral handling, and compact packaging are important. Its 12-bit ADC, comparator, DAC channels, DMA, and four USCI modules support sensor acquisition, control signaling, and communication tasks. Texas Instruments identifies the LQFP package as available in a nonmagnetic configuration for medical imaging applications. Qualification, creepage, isolation, output-signal limits, and the applicable medical-device standards must be evaluated at the complete-system level.

📟

Data Acquisition System

For a compact data-acquisition system, the MSP430F2619TPM provides a 12-bit ADC, DMA, substantial flash, 4 KB of SRAM, and multiple serial interfaces in one package. The RISC core can perform scaling, filtering, and control functions, while DMA reduces the interrupt burden associated with continuous sample movement. Four USCI modules allow the controller to connect to multiple sensors or storage devices without using all resources on a single bus. Analog input filtering, reference selection, acquisition timing, and buffer partitioning should be established from the family electrical characteristics.

🌐

Communications Controller

The MSP430F2619TPM can manage low-to-moderate-speed communications in connected industrial products because four USCI modules support UART, SPI, and I2C. The 16-bit CPU, hardware multiplier, DMA controller, and 120 KB flash support protocol processing, configuration storage, and logging alongside acquisition functions. Its low-power architecture is useful when radio or sensor activity is intermittent. Designers should budget USCI channels, interrupts, DMA descriptors, and timing margins early because simultaneous serial traffic can make a functionally capable MCU timing-bound without a deliberate resource plan.

⚡

Embedded Control System

The MSP430F2619TPM fits embedded control systems requiring analog input, programmable output, serial peripherals, and low-power standby behavior. The ADC can monitor process variables, the comparator can provide fast threshold events, and the dual DACs can generate analog control or test signals. The hardware multiplier assists with scaling and filtering, while DMA can service transfers in the background. For motor, valve, or high-current actuator control, the microcontroller should supervise external drivers rather than directly power loads, and safety limits should include shutdown states and watchdog recovery.

推薦產品摘要

MSP430F2619 Base device family 用於: Portable Measurement Instrument, Industrial Sensor Node, Medical Imaging Equipment, Data Acquisition System, Communications Controller, Embedded Control System MSP430F2618TPM Texas Instruments 用於: Portable Measurement Instrument MSP430F2419TPM Family option without DAC12 and DMA 用於: Industrial Sensor Node MSP430F2619TPM Texas Instruments 用於: Medical Imaging Equipment MSP430F2617TPM Lower-memory family option 用於: Data Acquisition System MSP430F2418TPM Lower-memory family option 用於: Communications Controller MSP430F2616TPM Texas Instruments 用於: Embedded Control System
What are the key specifications of MSP430F2619TPM that engineers should know?
The MSP430F2619TPM combines a 16 MHz 16-bit RISC CPU, 120 KB of flash, 4 KB of SRAM, 12-bit ADC, dual 12-bit DACs, DMA, AES support, and four USCI modules in a 64-pin LQFP package. According to the Texas Instruments MSP430F261x family datasheet, the device also includes a comparator, hardware multiplier, and five low-power modes for portable measurement and industrial control designs.
What is the operating voltage of MSP430F2619TPM?
The MSP430F2619TPM supports a 2.5 V or 3.3 V operating environment, depending on the selected power configuration. The Texas Instruments part details identify 2.5 V and 3.3 V device variants, while the MSP430F261x family datasheet defines the detailed supply-voltage and reset requirements. Designers should use that document for the exact operating, I/O, and flash-programming voltage limits.
What peripherals are integrated into MSP430F2619TPM?
The MSP430F2619TPM integrates a 12-bit ADC, two 12-bit DACs, one comparator, four USCI modules, DMA, a hardware multiplier, AES hardware, timers, GPIO, and an internal oscillator structure. According to Texas Instruments, the USCI blocks support UART, SPI, and I2C communication, while the mixed-signal peripherals reduce the need for separate analog and interface ICs.
Where can I download the MSP430F2619TPM datasheet PDF?
The official MSP430F2619TPM documentation is available through Texas Instruments’ product page and the MSP430F261x family datasheet linked from that page. The manufacturer datasheet is the preferred source for the complete pin list, electrical characteristics, timing diagrams, recommended operating conditions, and application guidance. Use the MSP430F2619 ordering information to confirm the TPM package configuration.
Where can I find the MSP430F2619TPM pinout?
The MSP430F2619TPM pinout is documented in the pin-configuration diagrams of the Texas Instruments MSP430F261x family datasheet. The TPM suffix identifies the 64-pin LQFP configuration, with a 10 mm by 10 mm body. Engineers should assign every signal from the manufacturer pin table and use the package drawing to confirm pad dimensions and exposed-pad requirements.
How much flash memory and SRAM does MSP430F2619TPM have?
The MSP430F2619TPM provides 120 KB of flash memory and 4 KB of SRAM. Texas Instruments describes the flash as 120K by 8 bits plus an additional 256 bytes, while the product page identifies 4 KB of SRAM. These resources support firmware, calibration tables, acquisition buffers, communications buffers, and mixed-signal control code.
What serial communication interfaces does MSP430F2619TPM support?
The MSP430F2619TPM supports UART, SPI, and I2C through four USCI modules. According to the Texas Instruments MSP430F261x family datasheet, the USCI architecture provides configurable serial channels for sensors, transceivers, data converters, and external nonvolatile memory. Each peripheral should be assigned and multiplexed according to the device pin table before PCB routing.
Is MSP430F2619TPM suitable for battery-powered measurement systems?
Yes, the MSP430F2619TPM is suitable for battery-powered measurement systems because its MSP430 architecture includes five low-power modes and a 16-bit RISC CPU designed for efficient embedded control. The 12-bit ADC, dual 12-bit DACs, DMA support, and hardware multiplier allow measurements and signal processing to be handled efficiently, although actual battery life depends on the selected clock source, duty cycle, and peripherals in use.
Where can I buy MSP430F2619TPM online?
Use the Request a Quote form on this page to request MSP430F2619TPM availability, order quantities, and a current quotation. Texas Instruments lists the TPM configuration as a 64-pin LQFP microcontroller ordering option, and the product is also listed by authorized distribution channels. The request process allows the exact MPN and required quantity to be reviewed before an order is placed.
What is the price of MSP430F2619TPM?
Current MSP430F2619TPM pricing is available through the Request a Quote form on this page. The form accepts the exact MPN, required quantity, and delivery expectations so the commercial team can return an appropriate quotation. Pricing should not be inferred from a different package suffix or reel configuration because orderable codes and production volumes can have different commercial terms.
What is the lead time for MSP430F2619TPM?
Submit MSP430F2619TPM requirements through the Request a Quote form on this page to confirm the current lead time and available production allocation. Texas Instruments publishes ordering and lifecycle information for the MSP430F2619, including the TPM package code, but current delivery timing can vary with order quantity and supply conditions. A quantity-specific quotation provides the most reliable lead-time confirmation.
Is MSP430F2619TPM in stock?
Current MSP430F2619TPM stock status should be confirmed through the Request a Quote form on this page. The exact TPM ordering code must be quoted because package, shipment form, and production quantity affect availability. The form allows procurement to check the current allocation without substituting another suffix or package configuration.
MSP430F2619TPM vs MSP430F2419TPM - which is better for a mixed-signal design?
Choose the MSP430F2619TPM when the design requires DAC12 and DMA resources; choose the MSP430F2419TPM when those two blocks are unnecessary. Texas Instruments states that MSP430F241x devices are otherwise identical to MSP430F261x devices. Both provide the 16-bit RISC architecture, fast 12-bit ADC, comparator, timers, four USCI modules, and up to 64 I/O pins, so pin-level review remains essential before interchange.
When should I choose MSP430F2619TPM over MSP430F2618TPM?
Choose MSP430F2619TPM when 120 KB of flash and the complete mixed-signal feature set are required; choose MSP430F2618TPM when its lower-memory configuration is sufficient for the application. Both parts belong to the MSP430F261x family and use the same 64-pin LQFP TPM package option. Confirm the exact memory size, DAC, DMA, timing, and lifecycle requirements in the manufacturer family documentation before substitution.
What can replace MSP430F2619TPM on the same PCB?
The closest same-footprint replacements are lower-memory MSP430F261x TPM devices or the MSP430F241x TPM family, provided the original design does not require DAC12 or DMA and all other electrical conditions match. The MSP430F2619TPM uses a 64-pin LQFP package, so package equality alone is insufficient. Verify pin assignment, flash size, SRAM, supply voltage, clock setup, peripherals, and qualification requirements before production release.
What is the best drop-in replacement for MSP430F2619TPM?
No uniquely verified cross-manufacturer drop-in replacement is identified for the MSP430F2619TPM. Same-brand MSP430F261x and MSP430F241x TPM options can share the 64-pin LQFP footprint, but a lower flash capacity or the absence of DAC12 and DMA changes functionality. Treat these as conditional family substitutions, validate every used pin, and confirm application timing and power requirements before approval.

工程參考資料,適用於 MSP430F2619TPM — 比較、設計指引及合規資訊。

選型指南

Choose MSP430F2619TPM when the product needs the full MSP430F261x feature set: a 16 MHz 16-bit RISC core, 120 KB flash, 4 KB SRAM, a 12-bit ADC, dual 12-bit DACs, comparator, four USCI modules, DMA, AES hardware, and a 64-pin LQFP footprint. It is particularly appropriate for portable measurement, industrial sensing, data acquisition, and embedded control designs that combine analog conversion with multiple serial interfaces.

Choose a lower-memory MSP430F261x TPM option only when its flash capacity and SRAM satisfy the firmware and application requirements. Consider MSP430F2419TPM or MSP430F2418TPM when DAC12 and DMA are unnecessary, because Texas Instruments identifies the F241x devices as otherwise identical to the F261x family but without those two blocks. Every candidate requires pin-by-pin validation, including supply voltage, clock configuration, peripheral multiplexing, interrupt behavior, and qualification needs.

與替代品比較

參數 本產品 MSP430F2618TPM MSP430F2617TPM MSP430F2616TPM MSP430F2419TPM MSP430F2418TPM
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 64-pin LQFP (10 mm x 10 mm) 64-pin LQFP (10 mm x 10 mm) 64-pin LQFP (10 mm x 10 mm) 64-pin LQFP (10 mm x 10 mm) 64-pin LQFP (10 mm x 10 mm) 64-pin LQFP (10 mm x 10 mm)
CPU Architecture 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC 16-bit RISC
Maximum Clock Frequency 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz 16 MHz
ADC Resolution 12 bits 12 bits 12 bits 12 bits 12 bits 12 bits
DAC12 Support Yes, dual 12-bit DAC Yes Yes Yes No No
DMA Support Yes Yes Yes Yes No No
Serial Interfaces UART, SPI, I2C UART, SPI, I2C UART, SPI, I2C UART, SPI, I2C UART, SPI, I2C UART, SPI, I2C

主要差異化特點

  • Complete mixed-signal feature set includes two 12-bit DAC channels (對比MSP430F2419TPM)
  • DMA support enables background data movement (對比MSP430F2419TPM)
  • Large 120 KB flash capacity supports more consolidated firmware (對比MSP430F2618TPM)
  • Four USCI modules provide flexible serial-interface allocation (對比MSP430F2419TPM)

設計說明

Route analog inputs and references away from switching-power nodes and high-speed digital traces. Use the Texas Instruments MSP430F261x family layout guidance for supply decoupling, analog grounding, and external component placement. Keep the ADC and DAC paths short, provide a quiet reference arrangement, and place input filtering close to the device where practical.

Decouple each required supply rail at the corresponding device pins with the capacitance and voltage ratings specified in the family datasheet. Verify brownout, reset, and startup behavior across every supply combination supported by the design. Low-power mode can reduce energy use, but leakage from analog circuitry, pull networks, sensors, and communication devices may dominate standby consumption.

Do not treat a shared 64-pin footprint as automatic interchangeability. The MSP430F241x family lacks DAC12 and DMA, while lower-memory MSP430F261x options may not fit the existing firmware image. Before substitution, compare every used pin, peripheral instance, interrupt vector, flash image size, SRAM demand, timing, and supply condition, then perform firmware and hardware regression tests.

Assign USCI channels and DMA transactions during firmware planning rather than after PCB layout. Serial clocking, simultaneous communications, ADC sampling, and PWM or capture activity can interact through timers and interrupt latency. Use the family user’s guide and datasheet timing tables to establish channel multiplexing, DMA priorities, and worst-case servicing requirements.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration appears in the cited product and distributor records. Medical-imaging suitability of the nonmagnetic LQFP option does not by itself establish medical-device certification.

資料驗證日期: 2026-11-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

MSP430F2619TPM datasheet MSP430F2619TPM pinout MSP430F2619 datasheet pdf MSP430F2619TPM specifications MSP430F2619 LQFP-64 MSP430F2619TPM replacement MSP430F2619TPM equivalent MSP430F2619TPM vs MSP430F2419TPM MSP430F2619TPM price MSP430F2619TPM stock Texas Instruments MSP430F2619TPM MSP430F2619 mixed signal application circuit

相關元件與詞彙

Texas Instruments MSP430F2619TPM MSP430F2619 MSP430F2618TPM MSP430F2617TPM MSP430F2616TPM MSP430F2419TPM MSP430F2418TPM MSP430 16-bit RISC CPU mixed-signal microcontroller microcontroller semiconductor 12-bit ADC 12-bit DAC DMA USCI UART SPI I2C AES LQFP-64 surface mount portable measurement
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情