Texas Instruments

MSP430F6721IPN - 25MHz Mixed-Signal MCU | Texas Instruments

部品番号: MSP430F6721IPN ✓ 生産中
3.6 V low-supply-voltage range Vdss 265 uA/MHz typical at 8 MHz and 3.0 V Id 80-pin LQFP (PN), 12 x 12 mm Package 25 MHz Speed 32 KB Memory
MOQ: 1 |

MSP430F6721IPN 概要

The Texas Instruments MSP430F6721IPN is a single-phase metering system-on-chip with a 16-bit MSP430 CPU, 25 MHz maximum clock speed, 32 KB of Flash program memory, and 2 KB of RAM. It integrates two Sigma-Delta ADCs, an LCD interface, and a real-time clock in an 80-pin LQFP (PN) package. The device also provides 52 general-purpose I/O pins for metering and peripheral connections.

A mixed-signal microcontroller is a semiconductor that combines digital control logic with analog measurement functions. The MSP430F6721 belongs to the hierarchy of mixed-signal MCU, 16-bit RISC microcontroller, embedded controller, and metering SoC. Its Sigma-Delta ADC architecture is intended for extracting useful measurements from slowly changing or heavily quantized analog signals while keeping the external signal chain manageable.

Key features include 32 KB of Flash memory, 2 KB of SRAM, a 25 MHz CPU, two integrated Sigma-Delta ADCs, an LCD interface, and a real-time clock. The 80-pin LQFP package provides enough connection capacity for sensor inputs, LCD signals, communications, and metering-system control functions. A 3.6 V low-supply-voltage design supports low-power embedded metering applications.

The MSP430 CPU architecture uses a 16-bit RISC instruction set with 16-bit registers and constant generators. Its low-power operating modes are relevant to utility meters and other systems that spend substantial time measuring or waiting between communication intervals. Flash execution, RAM organization, clock behavior, and converter performance should be checked against the operating conditions of the final meter design.

Typical uses include single-phase electricity meters, smart energy meters, industrial energy monitors, load-management equipment, and LCD-based metering terminals. The integrated converters suit measurement channels, the real-time clock supports time-based metering functions, and the LCD interface simplifies the connection to a local display.

When designing the PCB, reserve clean grounding and short analog paths around the Sigma-Delta ADC inputs, and follow the manufacturer pin-description and layout guidance. Verify ADC source impedance, input filtering, LCD timing, reset behavior, clock configuration, and programming interfaces before releasing the layout.

This page combines the exact ordering information, package characteristics, pin-compatible family alternatives, comparison parameters, and implementation guidance needed to evaluate MSP430F6721IPN for a new metering design.

ドロップイン代替品: MSP430F6721IPN — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: MSP430F6721IPN (同一形状・フットプリント) — 相違点: ADC Architecture, Active-Mode Current, Package, Product Type, Real-Time Clock.

Texas Instruments
ADC Architecture: 2 channels, 16-bit sigma-delta ADCs
Active-Mode Current: 265 µA/MHz at 8 MHz and 3.0 V
Package: 100-pin LQFP (PZ), 14 mm x 14 mm
比較対象 MSP430F6721IPN →

MSP430F6726IPZR

✅ ドロップイン
📦 80-pin LQFP
Pin count remains 80, a 0% package-pin-count difference; ADC, memory, and peripheral differences require validation

📋 参考代替品(カタログ未掲載)

MSP430F6721IPZR

✅ ドロップイン
📦 80-pin LQFP
Pin count remains 80, a 0% package-pin-count difference; ordering and reel-handling characteristics differ

📋 参考代替品(カタログ未掲載)

MSP430F6723IPZ

✅ ドロップイン
Texas Instruments
📦 80-pin LQFP
Single-phase metering mixed-signal microcontroller · 16-bit MSP430 RISC · 25 MHz · 64 KB Flash (64K x 8) · 4 KB (4K x 8) · 72 pins · 2 channels, 16-bit sigma-delta ADCs · 1 LCD controller

価格はお問い合わせください

データシートを見る →

MSP430F6730IPN

✅ ドロップイン
📦 80-pin LQFP
Pin count remains 80, a 0% package-pin-count difference; converter and peripheral resources differ by family

📋 参考代替品(カタログ未掲載)

MSP430F6736IPNR

✅ ドロップイン
📦 80-pin LQFP
Pin count remains 80, a 0% package-pin-count difference; ADC, Flash, and RAM resources differ by family

📋 参考代替品(カタログ未掲載)

MSP430F6721IPN 最大定格&電気的特性

Product Type Single-phase metering system-on-chip
CPU Architecture 16-bit MSP430 RISC
Maximum Clock Speed 25 MHz
Flash Memory 32 KB
RAM Memory 2 KB
ADC Architecture 2 Sigma-Delta ADCs
ADC Resolution 10-bit and 24-bit
Real-Time Clock Integrated
LCD Interface Integrated
General-Purpose I/O 52 pins
電源電圧 3.6 V low-supply-voltage range
Active-Mode Current 265 uA/MHz typical at 8 MHz and 3.0 V
パッケージ 80-pin LQFP (PN), 12 x 12 mm
実装タイプ Surface mount
動作温度範囲 -40°C to +85°C
Internal Oscillator Internal

MSP430F6721IPN 80-pin lqfp (pn), 12 x 12 mm ピン配置ガイド

MSP430F6721IPN (80-pin lqfp (pn), 12 x 12 mm パッケージ) のピン配置。 このデジタルICには、GPIO、通信インターフェース (UART、SPI、I2C)、および電源ピンが含まれています。代替ピン機能と設定オプションについては、メーカーのデータシートを参照してください。組み込みシステム設計とPCBレイアウトに不可欠です。

MSP430F6721IPN の 80-pin lqfp (pn), 12 x 12 mm パッケージピン配置図

詳細なピン配置データはありません: MSP430F6721IPN.

詳細は データシート をご参照ください。

主な用途

MSP430F6721IPN の用途: 6 件s: Single-Phase Smart Electricity Meters, Industrial Energy Monitoring Terminals, LCD-Based Utility Meter Interfaces, Load Management and Energy-Control Equipment, Low-Power Sensor and Acquisition Nodes, Compact Residential Metering Controllers.

⚡

Single-Phase Smart Electricity Meters

The MSP430F6721IPN fits a single-phase smart electricity meter because it combines a 16-bit, 25 MHz MSP430 CPU with two Sigma-Delta ADCs, 32 KB of Flash, and 2 KB of RAM. The converters can support energy-current measurement channels, while the integrated real-time clock supports time-based measurement records. Its LCD interface provides a local display path without requiring a separate display controller. The principal design trade-off is the limited 2 KB of RAM, so acquisition buffering and communication code must be sized carefully around the complete firmware architecture.

🏭

Industrial Energy Monitoring Terminals

For industrial energy monitoring, the MSP430F6721IPN provides a compact mixed-signal control platform with two Sigma-Delta ADCs and 52 general-purpose I/O pins. The 32 KB of Flash accommodates a meter-oriented firmware image, while 2 KB of RAM can support sampled values, display buffers, and protocol state. Its stated active-mode current of 265 uA/MHz at 8 MHz and 3.0 V provides a useful baseline for a low-power design, although local display consumption, communications, and sensor excitation must be included in the final power budget.

📺

LCD-Based Utility Meter Interfaces

The MSP430F6721IPN is well suited to an LCD-based utility meter interface because the LCD interface and real-time clock are integrated with the metering MCU. Designers can use one 16-bit controller for acquisition, timekeeping, display updates, and local keypad or communication control rather than splitting those functions across separate devices. The 80-pin LQFP also exposes 52 general-purpose I/O pins, but engineers should allocate those pins according to the exact LCD segment mapping and alternative peripheral functions in the manufacturer pin table.

🔧

Load Management and Energy-Control Equipment

The MSP430F6721IPN can act as the measurement and control core in load-management equipment by combining Sigma-Delta conversion, 16-bit computation, and multiple I/O capabilities in one package. The 25 MHz CPU supports responsive control logic, and the two integrated ADCs can support voltage or current-related measurement channels when paired with suitable external circuitry. Its low-power architecture is advantageous in equipment expected to operate continuously, while the limited memory resources make careful partitioning of acquisition, communications, and control routines important.

🧩

Low-Power Sensor and Acquisition Nodes

The MSP430F6721IPN can serve as the acquisition and control node in a low-power sensing installation where analog measurement and a local display are required. Its two Sigma-Delta ADCs are suited to metering-style measurements, and the real-time clock can timestamp events without an external timekeeping component. The 52 I/O pins provide flexible connections to sensors, communication hardware, and displays. Design effort should focus on input impedance, filtering, reference stability, and ensuring that the selected ADC channel has the required resolution for the intended measurement.

🔋

Compact Residential Metering Controllers

A compact residential metering controller benefits from the combination of 32 KB Flash, 2 KB RAM, two Sigma-Delta ADCs, LCD support, and a real-time clock in the MSP430F6721IPN. This integration can reduce the number of discrete components needed for a compact wall-mounted or panel-mounted meter. The 80-pin LQFP footprint requires careful escape routing around the analog inputs and LCD interface, while the 25 MHz CPU clock should be selected according to communication timing, power-consumption targets, and the required acquisition update rate.

おすすめ製品の概要

MSP430F6726IPZR Same-family 80-pin metering MCU candidate 使用用途: Single-Phase Smart Electricity Meters, LCD-Based Utility Meter Interfaces, Low-Power Sensor and Acquisition Nodes MSP430F6730IPN Same-family 80-pin metering MCU candidate 使用用途: Single-Phase Smart Electricity Meters, Load Management and Energy-Control Equipment MSP430F6723IPZ Texas Instruments 使用用途: Industrial Energy Monitoring Terminals, Load Management and Energy-Control Equipment, Compact Residential Metering Controllers MSP430F6736IPNR Same-family 80-pin metering MCU candidate 使用用途: Industrial Energy Monitoring Terminals, Low-Power Sensor and Acquisition Nodes MSP430F6721IPZR Same-family 80-pin metering MCU candidate 使用用途: LCD-Based Utility Meter Interfaces, Compact Residential Metering Controllers
What are the key specifications of MSP430F6721IPN that engineers should know?
The MSP430F6721IPN is a 25 MHz, 16-bit mixed-signal metering MCU with 32 KB of Flash, 2 KB of RAM, two Sigma-Delta ADCs, an LCD interface, a real-time clock, and 52 I/O pins. According to the Texas Instruments MSP430F6721 product page and datasheet, it is packaged in an 80-pin LQFP (PN) measuring 12 x 12 mm. Its combination of measurement conversion, display support, memory, and embedded control functions makes it suitable for single-phase metering equipment.
Where can I download the MSP430F6721IPN datasheet PDF?
The MSP430F6721IPN datasheet is available through the Texas Instruments MSP430F6721 product page at https://www.ti.com/product/MSP430F6721. The official product documentation includes the device description, electrical characteristics, pin descriptions, ordering information, and application guidance. Use the manufacturer document for the authoritative pin configuration and operating limits when assigning PCB nets or confirming ADC and LCD interface requirements.
Where can I find the MSP430F6721IPN pinout and package information?
The MSP430F6721IPN uses an 80-pin LQFP (PN) package with 52 general-purpose I/O pins, and its complete pin map is published in the Texas Instruments MSP430F6721 datasheet. Locate the pin-description table and package-drawing section on the official product page. The ordering snippet specifies an 80-pin LQFP package, while the detailed signal names, power pins, analog inputs, LCD connections, and programming pins must be taken directly from the manufacturer pin table.
Where can I buy MSP430F6721IPN and request a quotation?
Use the “Request a Quote” form on this page to request MSP430F6721IPN pricing, availability, and order support. The Texas Instruments ordering information identifies MSP430F6721IPN as an 80-pin, -40°C to +85°C industrial-temperature device. Commercial terms can change with demand and order quantity, so the quotation form is the appropriate route for a current unit price, volume break, and lead-time confirmation.
What is the lead time for MSP430F6721IPN?
Current lead time for MSP430F6721IPN should be confirmed through the “Request a Quote” form on this page. The part is an orderable 80-pin LQFP device from Texas Instruments, but manufacturing schedules and component allocation can affect availability. When requesting a quotation, state the required quantity, target shipment date, and whether each unit must be supplied in the manufacturer’s standard tray or another approved packing configuration.
Is MSP430F6721IPN currently in stock?
Current stock for MSP430F6721IPN should be confirmed through the “Request a Quote” form on this page. A distributor listing may show changing inventory without representing the quantity that can be reserved for a complete production order. Provide your required order quantity and target schedule so XAIPART can return the most useful availability and lead-time confirmation for the exact MSP430F6721IPN ordering code.
What is the difference between MSP430F6721IPN and MSP430F6721AIPN?
Both MSP430F6721IPN and MSP430F6721AIPN are identified by Texas Instruments as 16-bit, 25 MHz MSP430F6xx metering microcontrollers with 32 KB of Flash and an 80-LQFP (12 x 12 mm) package. The “A” revision may represent a silicon revision, but the manufacturer revision history and device-specific ordering information should be checked before production substitution. Confirm that memory, firmware, qualification, and errata expectations remain acceptable.
MSP430F6721IPN vs MSP430F6730IPN: which is better for a metering design?
MSP430F6721IPN is the better default choice when its two Sigma-Delta ADCs, 32 KB of Flash, 2 KB of RAM, LCD interface, and real-time clock satisfy the meter requirements. The MSP430F6730IPN also appears in an 80-pin surface-mount family, but its ADC and memory configuration differ. Choose it only after comparing converter count, resolution, firmware resources, display functions, and the manufacturer’s family documentation against the target design.
When should I choose MSP430F6721IPN over another MSP430F67xx device?
Choose MSP430F6721IPN when the design needs one 25 MHz mixed-signal MCU with two Sigma-Delta ADCs, 32 KB of Flash, 2 KB of RAM, an LCD interface, and an integrated real-time clock. It is particularly suitable for a single-phase metering terminal where those functions reduce external component count. Select another family member when the design requires different ADC performance, more program memory, additional RAM, or functions not provided by the MSP430F6721.
Is MSP430F6721IPN suitable for smart energy-meter applications?
The MSP430F6721IPN is suitable for smart energy-meter applications because it combines two Sigma-Delta ADCs with a 16-bit 25 MHz MSP430 CPU, 32 KB of Flash, 2 KB of RAM, an LCD interface, and a real-time clock. Its low-supply-voltage design and low-power operating modes align with meter platforms that must measure energy while managing consumed power. Final suitability still depends on ADC input range, accuracy, safety isolation, communications, and metrology certification requirements.
What can replace MSP430F6721IPN without changing the PCB footprint?
The MSP430F6721IPN can be evaluated against pin-compatible members of the MSP430F67xx family, but every candidate must be checked for ADC configuration, memory, peripherals, silicon revision, and firmware impact. The cross-reference set includes MSP430F6726IPZR, MSP430F6721IPZR, MSP430F6723IPZ, MSP430F6730IPN, and MSP430F6736IPNR. These are same-family alternatives rather than guaranteed substitutes; confirm the exact pin and electrical behavior in the manufacturer documentation before production use.
Is MSP430F6721IPN the same as MSP430F6736IPNR?
No definitive equivalence should be assumed between MSP430F6721IPN and MSP430F6736IPNR. Both belong to the 80-pin MSP430F6xx metering-microcontroller family, but the model names indicate different device configurations, particularly in converter and memory resources. Treat MSP430F6736IPNR as a candidate requiring engineering review, not as an automatic drop-in replacement. Compare ADC channels, LCD behavior, timing, RAM, Flash, pin multiplexing, and existing firmware requirements.
What is the best Texas Instruments equivalent for MSP430F6721IPN?
The closest Texas Instruments candidates are the MSP430F67xx family members identified in manufacturer and cross-reference listings, particularly MSP430F6726IPZR, MSP430F6723IPZ, MSP430F6730IPN, and MSP430F6736IPNR. No cross-brand equivalent is established for this exact metering SoC. Select the candidate whose ADC channels, memory size, LCD interface, clocking, real-time functions, and pin multiplexing match the original design, then verify the change with the manufacturer family documentation.
How much power does MSP430F6721IPN consume in active mode?
The stated active-mode consumption is 265 uA/MHz typical while executing Flash program code at 8 MHz and a 3.0 V supply. This figure is a specific operating point rather than a universal current rating, so calculate the CPU and peripheral budget using the actual clock, supply voltage, and active duty cycle. Low-power mode current, LCD loading, ADC activity, and external-interface behavior should be evaluated separately for the complete meter.
What is the best drop-in replacement for MSP430F6721IPN?
There is no universally drop-in replacement that can be declared from the available family information alone. MSP430F6726IPZR, MSP430F6721IPZR, MSP430F6723IPZ, MSP430F6730IPN, and MSP430F6736IPNR are the relevant same-family candidates, but each may change memory, ADC resources, display behavior, or peripheral availability. Request the exact target specification set and package, then validate the selected device against the pin table, electrical characteristics, firmware, and qualification requirements.

エンジニアリング参考データ: MSP430F6721IPN — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose MSP430F6721IPN when designing a single-phase metering product that benefits from one 25 MHz mixed-signal MCU providing two Sigma-Delta ADCs, 32 KB of Flash, 2 KB of RAM, an LCD interface, and a real-time clock. It is a natural fit when the product must measure analog channels, retain time information, drive a local display, and control additional metering functions without several separate ICs. Consider MSP430F6726IPZR or MSP430F6723IPZ when their documented memory or converter resources better fit the design. Consider MSP430F6730IPN or MSP430F6736IPNR when their family-specific measurement and peripheral capabilities are advantageous. Because all listed alternatives use an 80-pin LQFP, a footprint match does not remove the need to verify ADC channels, LCD mapping, memory, clocks, startup behavior, and firmware support. For production continuity, retain MSP430F6721IPN when its defined resources meet the requirements and the qualification program is already tied to that device.

代替品との比較

パラメータ この製品 MSP430F6726IPZR MSP430F6721IPZR MSP430F6723IPZ MSP430F6730IPN MSP430F6736IPNR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 80-pin LQFP (PN), 12 x 12 mm 80-pin LQFP 80-pin LQFP 80-pin LQFP 80-pin LQFP 80-pin LQFP
Pin Count 80 pins 80 pins 80 pins 80 pins 80 pins 80 pins
CPU Architecture 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC 16-bit MSP430 RISC

主な差別化要因

  • Purpose-built metering integration (vs MSP430F6730IPN)
  • Defined memory and speed configuration (vs MSP430F6726IPZR)
  • Original device identity for approved designs (vs MSP430F6736IPNR)

設計ノート

Assign the ADC inputs using the exact manufacturer pin-description table and keep the analog traces short, away from LCD drive lines and switching-supply nodes. Place filtering and input-protection components close to the associated pins, and provide a quiet return path for the analog reference. Because the device combines metering conversion with LCD and communications peripherals, validate the complete ground and reference arrangement on a prototype rather than relying only on nominal pin placement.

Build the power budget from the stated 265 uA/MHz typical active-mode figure at 8 MHz and 3.0 V, then add LCD, ADC, communications, and external-interface loads. Account for the operating state of every peripheral between measurements. The integrated low-power features are valuable in metering equipment, but a practical energy budget requires the actual clock frequency, supply voltage, duty cycle, and peripheral activity rather than the active-mode figure alone.

Do not treat an 80-pin package match as proof of functional interchangeability. Before replacing MSP430F6721IPN with an MSP430F67xx candidate, compare ADC channel assignment and resolution, Flash and RAM requirements, LCD mapping, real-time-clock behavior, pin multiplexing, clock configuration, and startup dependencies. Compile the existing firmware against the candidate device definition and perform a hardware regression test across reset, measurement, display, and communications states.

Plan firmware and memory use around the device’s 2 KB of RAM. Avoid placing large display, communications, and acquisition buffers in RAM unless the complete memory map has been calculated. Keep time-critical acquisition routines deterministic, minimize interrupt latency, and confirm that the clock divider and low-power settings match the metering update interval. Program-memory utilization should be checked early because added communications or display functions can change the 32 KB Flash budget significantly.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The ordering information identifies an industrial-temperature MSP430F6721IPN but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status. AEC-Q100 is not applicable because this ordering code is not identified as an automotive-qualified variant.

関連検索

MSP430F6721IPN datasheet MSP430F6721IPN pinout MSP430F6721IPN datasheet pdf MSP430F6721IPN specifications MSP430F6721IPN price MSP430F6721IPN stock MSP430F6721IPN replacement MSP430F6721IPN equivalent MSP430F6721IPN vs MSP430F6730IPN Texas Instruments MSP430F6721IPN MSP430F6721IPN 80-LQFP pinout MSP430F6721IPN metering application

関連部品&用語

Texas Instruments MSP430F6721IPN MSP430F6726IPZR MSP430F6721IPZR MSP430F6723IPZ MSP430F6730IPN MSP430F6736IPNR MSP430 mixed-signal microcontroller 16-bit RISC microcontroller single-phase metering system-on-chip Sigma-Delta ADC real-time clock LCD interface Flash memory static RAM LQFP-80 surface-mount package single-phase electricity meter industrial energy monitoring output noise quiescent current
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示