Texas Instruments

OPA129UB - 1MHz Ultra-Low Bias Op Amp | Texas Instruments

部品番号: OPA129UB ✗ 生産終了
10 V Vdss 100 fA Id 8-pin SOIC, 0.154 inch width (3.90 mm) Package
MOQ: 1 |

OPA129UB 概要

Texas Instruments OPA129UB is a single-amplifier, general-purpose operational amplifier with ultra-low input bias current, a 1 MHz gain-bandwidth product, and a 2.5 V/µs slew rate. The device operates from 10 V to 36 V total supply and is available in an 8-pin SOIC package. The OPA129UB uses Texas Instruments Difet dielectrically isolated FET inputs to minimize input bias current, making it suitable for high-impedance instrumentation and precision signal-conditioning circuits.

An operational amplifier is a high-gain analog amplifier used in feedback systems to amplify voltage differences with very high input impedance and low output impedance. The OPA129UB belongs to the voltage-feedback operational-amplifier hierarchy and can serve as an inverting amplifier, non-inverting amplifier, voltage follower, comparator in an open-loop circuit, or the active element in an instrumentation amplifier. Its defining role is signal conditioning rather than power conversion.

The main features of the OPA129UB include input bias current as low as 100 fA maximum, a 1 MHz gain-bandwidth product, a 2.5 V/µs slew rate, and operation from 10 V to 36 V. These characteristics support applications where the source impedance is high and amplifier input current could create an unwanted voltage error. A conventional precision bipolar-input amplifier may draw substantially more input current, whereas the OPA129UB's Difet input stage reduces that loading effect.

Its 8-pin SOIC implementation provides a standard surface-mount footprint and operates from dual positive and negative rails as well as a compatible single-supply arrangement within the stated supply limits. The 1 MHz bandwidth makes the device suitable for lower-frequency precision loops, sensor interfaces, photodiode amplifiers, and measurement front ends. The 2.5 V/µs slew rate also allows larger input signals to transition without requiring a much faster amplifier.

Typical applications include pH and electrochemical sensing, photodiode and optical-sensor amplification, high-impedance instrumentation, capacitive-sensor measurement, laboratory instrumentation, and precision current-to-voltage conversion. In these circuits, low input bias current helps preserve the integrity of weak source signals, while the 1 MHz bandwidth and 2.5 V/µs slew rate provide useful bandwidth for general instrumentation.

The primary design consideration is the unusually low input bias current. Board leakage, contamination, protective-diode leakage, and insufficient guarding around high-impedance nodes can become significant when the amplifier bias current is below 100 fA. Use short traces, clean insulating surfaces, and guarded input routes to prevent PCB contamination from degrading the measured signal.

This product record combines the OPA129UB's published operating characteristics with same-family replacement guidance and practical high-impedance layout advice. It is intended to help engineers identify the appropriate package, assess legacy availability, compare pin-compatible options, and plan laboratory or instrumentation designs without changing the PCB footprint unnecessarily.

ドロップイン代替品: OPA129UB — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: OPA129UB (同一形状・フットプリント) — 相違点: Amplifier Type, Gain-Bandwidth Product, Maximum Input Bias Current, Package, Slew Rate.

Texas Instruments
Amplifier Type: Precision low-noise DiFET operational amplifier
Gain-Bandwidth Product: 1.5 MHz
Maximum Input Bias Current: 5 pA
比較対象 OPA129UB →

OPA129UBE4

✅ ドロップイン
📦 8-pin SOIC
Same OPA129 Difet family and 8-pin SOIC format; qualification and lifecycle ordering-code differences require confirmation.

📋 参考代替品(カタログ未掲載)

OPA129UE4

✅ ドロップイン
📦 8-pin SOIC
Same OPA129 Difet family and 8-pin SOIC format; device grade and lifecycle differences require confirmation.

📋 参考代替品(カタログ未掲載)

OPA129UB 最大定格&電気的特性

Amplifier Type Single general-purpose operational amplifier
Number of Circuits 1 circuit
Input Stage Difet dielectrically isolated FET input
Maximum Input Bias Current 100 fA
Typical Input Bias Current 0.03 pA
Gain-Bandwidth Product 1 MHz
Slew Rate 2.5 V/µs
Minimum Total Supply Voltage 10 V
Maximum Total Supply Voltage 36 V
Nominal Positive and Negative Supply ±18 V
パッケージ 8-pin SOIC, 0.154 inch width (3.90 mm)
実装タイプ Surface mount
ピン数 8 pins
Datasheet Page Count 14 pages

OPA129UB 8-pin soic, 0.154 inch width (3.90 mm) ピン配置ガイド

OPA129UB (8-pin soic, 0.154 inch width (3.90 mm) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

OPA129UB の 8-pin soic, 0.154 inch width (3.90 mm) パッケージピン配置図

詳細なピン配置データはありません: OPA129UB.

詳細は データシート をご参照ください。

主な用途

OPA129UB の用途: 6 件s: High-Impedance Sensor Conditioning, Photodiode Signal Detection, Electrochemical Measurement Front End, Laboratory Instrumentation, Precision Current-to-Voltage Conversion, Capacitive Sensor Interface.

🧩

High-Impedance Sensor Conditioning

OPA129UB fits high-impedance sensor conditioning because its Difet input stage can reduce input bias current to as low as 100 fA. When the source impedance is high, amplifier bias current creates a signal-dependent voltage error that can obscure the sensor output. A practical circuit places the amplifier close to the sensor and uses a feedback network suited to the required gain. The 1 MHz gain-bandwidth product and 2.5 V/µs slew rate permit reasonable response speed, although layout cleanliness and guarding are essential when PCB leakage is comparable to the bias current.

🎥

Photodiode Signal Detection

OPA129UB is appropriate for photodiode signal detection because photodiode currents are small and the amplifier input must contribute minimal bias-current error. Its 100 fA maximum input bias current helps preserve weak photocurrent information that could otherwise be lost across the feedback impedance. A transimpedance implementation can use the amplifier in an inverting configuration, but compensation must be selected for the photodiode capacitance. The 1 MHz bandwidth supports moderate-speed detection rather than the highest-rate optical receivers.

💊

Electrochemical Measurement Front End

OPA129UB suits electrochemical measurement front ends where the sensor presents a high source impedance and the useful output is a small current or voltage. Ultra-low bias current reduces excitation errors and improves the integrity of the measurement, while the 1 MHz bandwidth can support signals extending well beyond the slow DC region. The implementation should use guarded input nodes, low-contamination PCB materials, and careful separation between sensitive input traces and switching or digital circuitry. Supply headroom and output swing must be checked against the sensor operating range.

🔧

Laboratory Instrumentation

OPA129UB can be used in laboratory instrumentation as a general-purpose precision front end for weak, high-impedance sources. The 10 V to 36 V total supply range supports traditional dual-rail laboratory architectures, and the 2.5 V/µs slew rate provides adequate response for many low-frequency measurements. Its ultra-low input bias current helps when the instrument connects to resistive dividers, probes, or sensors with leakage-sensitive impedances. Stable operation still depends on suitable feedback compensation and careful grounding of the measurement return path.

⚡

Precision Current-to-Voltage Conversion

OPA129UB is useful in precision current-to-voltage conversion when the incoming current is very small and the feedback resistor is large. Because input bias current of up to 100 fA produces a much smaller error than in a conventional bipolar-input amplifier, the circuit can preserve more of the measured signal. The 1 MHz gain-bandwidth product supports useful closed-loop bandwidth, while the 2.5 V/µs slew rate handles output transitions. Resistor leakage, contamination, and stray capacitance should be controlled because they can otherwise dominate the performance of the measurement.

🏭

Capacitive Sensor Interface

OPA129UB can form the active element of a capacitive-sensor interface when the sensor and feedback network have high impedance. The ultra-low bias current reduces unwanted charge injection at the input, and the 1 MHz bandwidth provides a practical operating range for many non-contact, capacitive, or proximity measurements. However, the high-impedance node makes stability sensitive to parasitic capacitance, so the compensation network and physical trace length require evaluation. Keep the sensitive input path short, guard it where practical, and verify stability with the complete sensor and cable assembly.

おすすめ製品の概要

OPA129UBE4 Same-family ultra-low-bias-current amplifier candidate 使用用途: High-Impedance Sensor Conditioning, Photodiode Signal Detection, Electrochemical Measurement Front End, Laboratory Instrumentation, Precision Current-to-Voltage Conversion, Capacitive Sensor Interface OPA129UE4 Same-family OPA129 ordering-code candidate 使用用途: High-Impedance Sensor Conditioning, Photodiode Signal Detection, Electrochemical Measurement Front End, Laboratory Instrumentation, Precision Current-to-Voltage Conversion, Capacitive Sensor Interface
Where to download the OPA129UB datasheet PDF?
The OPA129UB datasheet is available from the Texas Instruments product documentation through the published OPA129UB datasheet page, which identifies a 14-page document. Use the manufacturer datasheet's pin-description table when assigning the eight SOIC pins and check its electrical-characteristics table before finalizing compensation, supply, and bias-current limits. The available OPA129UB documentation also describes the device as an ultra-low-bias-current Difet operational amplifier.
What are the key specifications of OPA129UB?
OPA129UB is a single general-purpose operational amplifier with a 1 MHz gain-bandwidth product, 2.5 V/µs slew rate, and input bias current down to 100 fA. It operates from 10 V to 36 V total supply and is packaged in an 8-pin SOIC. According to the OPA129UB datasheet description, its dielectrically isolated FET input stage is the principal feature supporting high-impedance signal conditioning.
What is the operating voltage range of OPA129UB?
OPA129UB operates from 10 V to 36 V total supply, with ±18 V identified for the nominal dual-rail operating point. The 10 V minimum is the total voltage across the two supply terminals rather than the magnitude of one rail. When using a single supply, the datasheet's input and output common-mode limits must also be checked because those conditions constrain the usable common-mode range.
Why is the OPA129UB suitable for high-impedance sensors?
OPA129UB is suitable for high-impedance sensors because its Difet input stage supports input bias current as low as 100 fA. That low current reduces the voltage error created when current flows through a high-value sensor resistance. With a 1 MHz gain-bandwidth product and 2.5 V/µs slew rate, the device can also provide useful response speed for general precision instrumentation rather than functioning only as a static electrometer amplifier.
Where can I find the OPA129UB pinout?
The OPA129UB pinout must be taken from the pin-description table in the manufacturer datasheet because it uses an 8-pin SOIC package with a standard pin-1 orientation marker. Do not infer the pin functions solely from a generic SOIC drawing. Confirm the offset-null, supply, inverting-input, non-inverting-input, output, and ground assignments directly from the package drawing before laying out the board.
Is OPA129UB in stock and what is its lead time?
OPA129UB is listed as obsolete, so current availability and production lead time should be treated as limited rather than guaranteed. Use the Request a Quote form on this page to request the current lifecycle, stocking, and order-lead-time status for the exact 8-pin SOIC ordering code. If continuity is required, confirm the selected replacement and its supported package before committing a new production build.
What is the price of OPA129UB?
OPA129UB is an obsolete catalog component, and its former unit-price reference should not be treated as a current executable quotation. Use the Request a Quote form on this page to request current pricing, minimum order quantity, and available inventory for the exact OPA129UB part number. The formal quote should also identify the 8-pin SOIC package and obsolete-product handling conditions.
Where to buy OPA129UB online?
Use the Request a Quote form on this page to request OPA129UB availability and an executable order quotation. Because the OPA129UB is obsolete, buyers should request a specific lifecycle statement, quantity availability, and any traceability or inspection requirements. This avoids treating a legacy inventory reference as a promise of repeatable future supply.
What can replace OPA129UB?
OPA129UB can be replaced only after confirming electrical behavior, supply range, offset configuration, and the exact 8-pin SOIC footprint. Same-family OPA129 ordering codes can provide continuity when their package and pin assignment match, but a changed order code may also change grade or qualification. Cross-brand candidates should be checked for input bias current, input offset voltage, bandwidth, noise, common-mode range, and stability before substitution.
What is the best drop-in replacement for OPA129UB?
The most defensible drop-in replacement is the same-family OPA129 device whose ordering code specifies the same 8-pin SOIC package and pin arrangement. OPA129UBE4 and OPA129UE4 are identified as same-family comparison candidates, but the package suffix and qualification still require confirmation. For a cross-brand replacement, request an engineering cross-reference because low input bias current and offset behavior must be evaluated rather than inferred from the SOIC footprint alone.
OPA129UB vs OPA129UE4: which is the better replacement?
OPA129UE4 is a same-family OPA129 ordering code and may be preferable when its package, qualification, and lifecycle status match the design. The published comparison identifies both devices as ultra-low-bias-current Difet operational amplifiers, but an ordering-code change can alter device grade or production history. Compare the exact electrical tables and confirm the physical package before treating OPA129UE4 as a drop-in replacement.
OPA129UB vs OPA129UBE4: what is the difference?
OPA129UBE4 is a same-family OPA129 ordering code presented as a comparison candidate for OPA129UB. The visible comparison confirms that both belong to the OPA129 ultra-low-bias-current Difet family, while the searchable listing does not expose every difference between the two order codes. Confirm the package, temperature grade, qualification, and lifecycle status in the manufacturer documentation before using OPA129UBE4 as a replacement.
When should I choose OPA129UB over another low-bias operational amplifier?
Choose OPA129UB when an existing 8-pin SOIC design requires a well-known ultra-low-bias-current amplifier with a 1 MHz gain-bandwidth product and 2.5 V/µs slew rate. Its Difet input stage supports high source impedances, while its legacy status makes availability and long-term production continuity the central concerns. For new designs, evaluate a currently supported replacement as well, but preserve the same input-loading, bandwidth, and compensation assumptions.
Is OPA129UB suitable for photodiode and electrochemical sensor interfaces?
OPA129UB is suitable for photodiode and electrochemical sensor interfaces when source impedance is high and input bias current would materially disturb the signal. Its input bias current can be as low as 100 fA, helping minimize error across large feedback or sensor resistances. The 1 MHz bandwidth and 2.5 V/µs slew rate support moderate-speed conditioning, while PCB guarding and cleanliness remain essential.
What is the best Analog Devices equivalent for OPA129UB?
An Analog Devices equivalent should be selected by matching the 8-pin SOIC pinout and comparing input bias current, offset voltage, input noise, bandwidth, slew rate, supply range, and common-mode limits. Cross-reference search results indicate that Analog Devices replacements exist for the OPA129 family, but the exact device identifiers are not visible in the available result. Do not approve a replacement until the manufacturer's pin-compatible cross-reference confirms the footprint and electrical requirements.

エンジニアリング参考データ: OPA129UB — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose OPA129UB for an existing 8-pin SOIC design whose signal path depends on the OPA129 family's ultra-low input bias current, 1 MHz gain-bandwidth product, and 2.5 V/µs slew rate. OPA129UBE4 is the preferred same-family candidate when its ordering code preserves the required package, grade, and qualification. Choose OPA129UE4 when that exact order code is the supported continuity option after its lifecycle and electrical characteristics are confirmed. Neither candidate should be approved from the package outline alone: verify pin assignment, input offset voltage, bias current, common-mode range, noise, and stability. For a cross-brand redesign, use a manufacturer-approved pin-compatible cross-reference and repeat the complete signal-chain evaluation, particularly when board leakage, sensor capacitance, or long cable connections affect operation.

代替品との比較

パラメータ この製品 OPA129UBE4 OPA129UE4
Brand Texas Instruments Texas Instruments Texas Instruments
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Amplifier Type General-purpose operational amplifier Ultra-low-bias-current Difet operational amplifier Ultra-low-bias-current Difet operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit
Gain-Bandwidth Product 1 MHz 1 MHz 1 MHz
Slew Rate 2.5 V/µs 2.5 V/µs 2.5 V/µs
Total Supply Voltage Range 10 V to 36 V 10 V to 36 V 10 V to 36 V
Maximum Input Bias Current 100 fA 100 fA 100 fA

主な差別化要因

  • Ultra-low input bias current for high-impedance sources (vs OPA129UBE4)
  • Same-family continuity with an 8-pin SOIC footprint (vs OPA129UE4)
  • Adequate bandwidth and slew rate for precision instrumentation (vs OPA129UBE4)

設計ノート

Treat the OPA129UB input as a leakage-sensitive node. Keep input and feedback traces short, avoid exposed conductive contamination, and route a guard around the input where the amplifier configuration permits it. With maximum input bias current of 100 fA, PCB surface leakage and humidity can become comparable to the amplifier's own error. Do not route switching-regulator traces, high-impedance digital nets, or relay contacts near the sensitive input path.

Do not substitute a generic precision op amp solely because it fits an 8-pin SOIC outline. Confirm the pin assignment, input bias current, offset voltage, input noise, common-mode range, supply range, and stability with the actual gain and feedback values. A footprint match is not sufficient when the circuit depends on picoampere-level input current, because the alternative's input bias current may create an unacceptable offset.

Evaluate feedback compensation with the complete source impedance and any sensor or cable capacitance attached. The OPA129UB's 1 MHz gain-bandwidth product and 2.5 V/µs slew rate are useful for general instrumentation, but very high transimpedance gains can still require explicit noise-gain compensation. Check stability in both time and frequency domains, and keep sensitive nodes physically separated from fast-changing nodes to minimize capacitive feedthrough.

The OPA129UB operates from 10 V to 36 V total supply, so confirm the complete rail arrangement before designing the power subsystem. The 10 V figure applies across the supply terminals and does not mean that a 10 V single supply automatically provides the required input or output common-mode range. Use decoupling appropriate for the amplifier package and verify output swing, startup, and supply sequencing against the sensor's operating range.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

The available product information identifies the OPA129UB as obsolete but does not expose specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations.

データ検証日: 2026-11-14 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

opa129ub datasheet OPA129UB datasheet PDF OPA129UB pinout OPA129UB specifications OPA129UB SOIC replacement OPA129UB equivalent OPA129UB drop-in replacement OPA129UB vs OPA129UE4 OPA129UB vs OPA129UBE4 OPA129UB 100 fA input bias OPA129UB 1 MHz op amp OPA129UB high impedance sensor OPA129UB photodiode amplifier OPA129UB price Texas Instruments OPA129UB

関連部品&用語

Texas Instruments OPA129UB OPA129UBE4 OPA129UE4 OPA129 Difet operational amplifier voltage-feedback amplifier signal-conditioning IC analog IC semiconductor ultra-low bias current input bias current gain-bandwidth product slew rate high-impedance sensor photodiode amplifier electrochemical sensor transimpedance amplifier 8-pin SOIC SOIC family surface-mount package precision instrumentation PCB leakage 100 fA
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示