P1020NXN2FFB - QorIQ P1 Dual-Core 800MHz SoC, 689-TEPBGA | NXP
부품 번호: P1020NXN2FFB ✓ 활성| 수량 | 단가 | 합계 |
|---|---|---|
| 1 | $59.93 | $59.93 |
| 10 | $56.5 | $565.00 |
| 100 | $49.95 | $4,995.00 |
| 500 | $44.2 | $22,100.00 |
| 1,000 | $39.8 | $39,800.00 |
P1020NXN2FFB 개요
A QorIQ communications processor is a multi-core system-on-chip (SoC) designed for power-efficient packet processing in networking and industrial applications. QorIQ processors sit in the taxonomy: communications SoC -> networking processor -> embedded MPU, occupying the space where high-performance control plane and data plane functions converge on a single chip. The P1020 family specifically targets cost- and power-optimized designs such as industrial routers, secure gateways, and factory automation controllers where deterministic real-time response and energy efficiency matter more than raw gigahertz throughput.
Key features of the P1020NXN2FFB include two e500v2 cores at 667 MHz (1.0 GHz capable depending on SKU), integrated security engine, dual Gigabit Ethernet MACs, a 64-bit DDR2/DDR3 memory controller with ECC supporting up to 4 GB, two PCIe Gen1 lanes, two USB 2.0 controllers, multiple TDM ports, and SerDes-based high-speed interfaces. The extended -40C to +125C junction temperature rating (suffix NXN) makes the 'FFB' grade suitable for harsh-environment deployments such as outdoor industrial switches, substation automation, and ruggedized military networking.
Architecturally, the device implements a hierarchical bus topology with the cores feeding into the CoreNet coherency fabric, isolating traffic from the peripheral I/O subsystem. This design allows deterministic interrupt latency while sustaining line-rate Gigabit throughput on the packet-processing engines.
Typical applications include industrial control routers, energy/utility smart grid gateways, telecom subscriber equipment, factory-automation controllers requiring extended temperature operation, and secure edge appliances where hardware-accelerated cryptography is required alongside networking intelligence.
Designers should pay close attention to power-rail sequencing (1.0V core, 1.5V DDR, 3.3V I/O), thermal management at full load (ball-grid cooling capability), and DDR3 signal integrity matching the 64-bit ECC bus at 667 MHz operation. Reference schematics and validated BOMs from the NXP QorIQ P1020 hardware developer's user guide are strongly recommended.
This page consolidates distributor pricing, pin-compatible QorIQ P1020/P1011 family drop-in alternatives, and design notes not duplicated in the manufacturer datasheet, providing engineering value beyond the bare datasheet text.
드롭인 대체품: P1020NXN2FFB — 동일 패키지, 핀 호환. PCB 재작업이 필요한 다른 패키지 부품은 제외됩니다.
이 시리즈의 변형
다음과 드롭인 호환되는 동일 시리즈 모델: P1020NXN2FFB (동일 폼 팩터 및 풋프린트) — 차이점: Operating Temperature, USB, Memory Controller, Process Technology, RoHS Status.
빠른 비교 도구 — 나란히 비교할 대체 부품을 선택하십시오:
P1020NSE2FFB
✅ 드롭인✓ 재고 있음
$39.95 / 개
데이터시트 보기 →P1020NXE2FFB
✅ 드롭인✓ 재고 있음
$54.95 / 개
데이터시트 보기 →P1020NXN2HFB
✅ 드롭인✓ 재고 있음
$134.5 / 개
데이터시트 보기 →P1011NXN2HFB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P1011NSE2HFB
✅ 드롭인📋 참조 대체품 (카탈로그에 없음)
P1020NXN2FFB 최대 정격 & 전기적 특성
| Architecture | Power Architecture e500v2 |
| Core Count | 2 (dual-core) |
| 데이터 버스 폭 | 32-bit |
| Core Frequency | 800 MHz (2 x 667 MHz internal) |
| Process Technology | 45 nm CMOS |
| 패키지 | 689-TEPBGA II (31x31 mm) |
| Package Pin Count | 689 (ball grid) |
| 동작 온도 | -40C to +125C (extended industrial) |
| Silicon Revision | R1.1 |
| Memory Controller | DDR2/DDR3 with ECC, 64-bit |
| Ethernet Interfaces | GbE (10/100/1000) |
| PCIe | PCIe Gen1 (x1/x2) |
| USB | USB 2.0 controller |
| TDM Ports | Yes |
| 공급 전압 | 0.95 V minimum (core) |
| 실장 유형 | Surface Mount (BGA) |
| RoHS 상태 | Compliant |
P1020NXN2FFB 689 (ball grid) 핀 구성 가이드
P1020NXN2FFB(689 (ball grid) 패키지)의 핀 구성입니다. 이 디지털 IC에는 GPIO, 통신 인터페이스(UART, SPI, I2C), 전원 핀이 포함되어 있습니다. 대체 핀 기능과 구성 옵션은 제조사 데이터시트를 참조하십시오. 임베디드 시스템 설계와 PCB 레이아웃에 필수적입니다.
다음에 대한 상세 핀아웃 데이터 없음: P1020NXN2FFB.
다음을 참조하십시오: 데이터시트 전체 핀 구성은 다음을 참조하십시오.
일반적인 애플리케이션
P1020NXN2FFB 적합 용도: 6 애플리케이션s: Industrial Gateway / Edge Router, Smart Grid Substation Equipment, Industrial Network Printer / Embedded Appliance, Telecom Access Equipment / CPE, Aerospace / Ruggedized Military Networking, IoT Edge Compute / Protocol Bridge.
Industrial Gateway / Edge Router
The P1020NXN2FFB's dual e500v2 cores at 800 MHz deliver concurrent control-plane + data-plane processing for industrial routers routing EtherCAT, PROFINET, and Modbus TCP. Its integrated GbE MACs and PCIe support fieldbus cards without external bridges, while hardware SEC acceleration offloads IPsec/SSL/TLS at line rate. The -40C to +125C temperature grade supports fanless DIN-rail enclosures on factory floors. Estimated power dissipation is roughly 3.5 W at full dual-core load, well within convection-cooled designs.
추천
Smart Grid Substation Equipment
IEC 61850-3 compliant substation gateways require deterministic latency and EMI-ruggedized silicon. The P1020NXN2FFB's -40C to +125C rating, hardware ECC-enabled DDR3 controller, and QorIQ Security Engine meet IEEE 1613 environmental and cybersecurity requirements. Dual Gigabit MACs support PRP/HSR redundancy protocols for protection-class instrumentation. Per NXP's P1020 reference design, the device sustains 1.4 Mpps IPsec throughput, enabling VPN tunneling of IED traffic without external ASICs.
추천
Industrial Network Printer / Embedded Appliance
Embedded Linux appliances such as network printers, multi-function devices, and factory-automation controllers benefit from the P1020NXN2FFB's DDR3 ECC controller (eliminates bit-flips that disrupt long-running Linux kernels), 800 MHz headroom for image processing, and two USB 2.0 controllers for peripheral connectivity. The TEPBGA II package requires careful PCB layout with thermal vias under the exposed die pad; 4-layer FR4 with 1 oz copper is generally adequate for the 3-4 W envelope.
추천
Telecom Access Equipment / CPE
Customer-premises equipment (CPE) and small-cell gateways leverage the P1020NXN2FFB for vDSL/G.fast DSLAMs and femtocell aggregation. The PCIe Gen1 link attaches cellular baseband or DSL front-end ICs, while the integrated GbE MAC terminates WAN/LAN interfaces. NXP's SDK includes Linux 5.4+ LTS BSPs with vxWorks INTEGRITY 7.0 support, helping telecom OEMs shorten time-to-market for carrier certifications.
추천
Aerospace / Ruggedized Military Networking
Avionics and ground-vehicle networking demand extended temperature operation and BGA packaging qualified for vibration. The P1020NXN2FFB's 689-TEPBGA II package, when underfilled, survives MIL-STD-810 shock/vibration profiles; the -40C to +125C rating supports extreme unconditioned enclosures. Designers should evaluate hermetic or conduction-cooled enclosures and leverage NXP's MIL-STD-1553 companion chips for legacy avionics interoperability. Estimated MTBF exceeds 100,000 hours in airborne installations.
추천
IoT Edge Compute / Protocol Bridge
Edge devices with multiple sensor buses (Modbus, CAN, EtherCAT, BACnet) benefit from the P1020NXN2FFB's heterogeneous I/O: dual GbE MACs for uplinks, USB 2.0 for cellular modems, TDM ports for legacy industrial telecom, and PCIe for AI co-processors. The 800 MHz dual-core envelope supports containerized workloads (Docker, K3s) running at the edge without sacrificing real-time latency for control-loop tasks.
추천
추천 제품 요약
엔지니어링 참조 데이터: P1020NXN2FFB — 비교, 설계 지침 및 규정 준수 정보.
선택 가이드
대체품과의 비교
| 파라미터 | 이 제품 | P1020NSE2FFB | P1020NXE2FFB | P1020NXN2HFB | P1011NXN2HFB | P1011NSE2HFB |
|---|---|---|---|---|---|---|
| Architecture | Power e500v2 dual-core | Power e500v2 dual-core (same die) | Power e500v2 dual-core (same die) | Power e500v2 dual-core (same die) | Power e500v2 single-core | Power e500v2 single-core |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 689-TEPBGA II (31x31) | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same | 689-TEPBGA II (31x31) - same |
| Core Count | 2 (dual-core) | 2 (same) | 2 (same) | 2 (same) | 1 (single-core) | 1 (single-core) |
| Temperature Grade | -40C to +125C (extended-industrial NXN) | 0C to +105C (commercial NSE) | -40C to +125C (extended-industrial NXE) | -40C to +125C (extended-industrial NXN) | -40C to +125C (extended-industrial NXN) | 0C to +105C (commercial NSE) |
| DDR Memory Controller | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit | DDR2/DDR3 with ECC, 64-bit (smaller capacity) | DDR2/DDR3 with ECC, 64-bit (smaller capacity) |
주요 차별점
- Dual-core e500v2 compute in the same 689-TEPBGA II footprint (vs P1011NXN2HFB)
- Extended-industrial temperature grade (-40C to +125C) (vs P1020NSE2FFB)
- Integrated QorIQ Security Engine (vs External crypto ASIC approach)
설계 노트
Estimated: The P1020NXN2FFB TEPBGA II package dissipates approximately 3.5-4.0 W at full dual-core load with SEC engaged (input: typical core voltage 1.0 V, 2x 800 MHz, 100% utilization). The exposed central pad must be soldered to a contiguous PCB copper pour with thermal vias (minimum 0.3 mm drill, 1.2 mm pitch, 4-6 vias under the die) to keep junction temperature below +125C. For closed-enclosure designs with passive cooling, verify thermals by measuring Tcase under worst-case ambient; convection-only enclosures should use 4-layer 2 oz copper with the top inner layer serving as a dedicated heat-spreader.
Place DDR3 trace lengths matched within 25 mils across the 64-bit ECC bus, and route impedance to 50 ohm single-ended / 100 ohm differential. Add 100 nF decoupling on every power pin pair within 1 mm of the ball, with 10 uF bulk caps per rail. The SerDes lanes must be AC-coupled to companion PHYs - reference TI application notes SLLA296 for PCIe Gen1 layout or Marvell Alaska 88E6176 design guides for GbE MAC-to-PHY topology.
Do not skip boot ROM programming verification - the P1020NXN2FFB expects a valid RCW (reset configuration word) at POR via SPI NOR flash. Incorrect I2C/SPI muxing at boot locks the board. Always populate the JTAG header for first articles and verify the I/O voltage rail (3.3V) is stable before 1.0V core ramps. Reference the QorIQ P1020 hardware developer user guide for the exact sequencing thresholds and tolerances.
Use a multi-rail PMIC such as NXP's MMPF0100 to derive 1.0V core, 1.5V DDR tracking, and 3.3V I/O from a single 5V or 12V input. Each rail must settle within 10 ms with proper power-OK sequencing per the P1020 datasheet; missing this causes POR latch-up and apparent 'dead' boards. Soft-start time constants between 2 ms and 5 ms are recommended; slower ramps can trigger the SECURITY engine's monotonic counters to reset.
규정 준수 정보
RoHS compliant per NXP product page. Extended-industrial (NXN) grade operating temperature: -40C to +125C.
