P5010NSE1QMB557 - QorIQ P5 PowerPC 64-Bit MPU, 2GHz | NXP
部品番号: P5010NSE1QMB557 ✓ 生産中| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $382.42 | $382.42 |
| 10 | $360 | $3,600.00 |
| 50 | $335 | $16,750.00 |
| 100 | $310 | $31,000.00 |
| 500 | $285 | $142,500.00 |
P5010NSE1QMB557 概要
Background: A microprocessor (MPU) is an integrated circuit that contains the central processing unit of a computing system, executing instructions fetched from external memory. High-end communications MPUs like the QorIQ P5 family target networking infrastructure - routers, switches, wireless base stations, and security appliances - where deterministic performance, large memory bandwidth, and integrated high-speed serial interfaces (SerDes) are critical. Within the system hierarchy, an MPU sits above microcontrollers (MCUs) in performance, above DSPs in control-plane flexibility, and below FPGAs in raw parallel throughput.
Key features of the P5010 include: a hardware-accelerated data path supporting packet parsing and classification, integrated 10-Gigabit Ethernet and Gigabit Ethernet MACs, two PCIe Gen 2 controllers, multiple DMA engines, and a security engine supporting symmetric and asymmetric cryptographic algorithms. The platform's large L2 cache (1 MB) and L3 cache (512 KB) reduce external memory pressure and accelerate lookup-intensive workloads.
The P5010NSE1QMB557 is typically applied to networking equipment such as mid-range enterprise routers, network-attached storage controllers, industrial control gateways, and unified threat management (UTM) appliances. Its combination of deterministic single-thread execution and high-speed I/O makes it well-suited to control-plane tasks that require low latency alongside heavy peripheral bandwidth.
When designing with the FCPBGA-1295 package, engineers must use a multi-layer PCB (typically 12+ layers) with high-density breakouts, controlled-impedance SerDes routing, and matched-length DDR3 traces. The package's 37.5 mm body requires careful thermal management; at 2 GHz, the device dissipates approximately 8-15 W under typical workloads, often requiring a heatsink and forced airflow.
This page synthesizes cross-reference data, drop-in compatible variants from the QorIQ P5 family, and practical design notes not found in the manufacturer datasheet.
ドロップイン代替品: P5010NSE1QMB557 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: P5010NSE1QMB557 （同一形状・フットプリント） — 相違点: Core Count, Memory Controller, Package, Security Engine.
クイック比較ツール — 並列比較する代替部品を選択:
P5010NSE1QMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5010NSE1MMB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5020NSE1QMB
✅ ドロップイン📋 参考代替品（カタログ未掲載）
P5020NSE1MMB
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
P5010NSN1QMB
✅ ドロップイン ⚠️ 仕様未検証✓ 在庫あり
$318.25 / 個
データシートを見る →P5010NSE1QMB557 仕様
| Core Architecture | PowerPC e5500 (64-bit) |
| Core Count | 1 |
| Maximum Core Frequency | 2.0 GHz |
| L2 Cache | 1 MB |
| L3 Cache | 512 KB |
| Memory Controller | 64-bit DDR3/DDR3L with ECC |
| パッケージ | 1295-FCPBGA (37.5 x 37.5 mm) |
| 動作温度範囲 | -40C to +105C |
| Ethernet Interfaces | 10 Gigabit Ethernet + Gigabit Ethernet MACs |
| PCIe Controllers | 2 x PCIe Gen 2 |
| Security Engine | Symmetric and asymmetric cryptography |
| DMA Engines | Multiple |
| 実装タイプ | Surface Mount (BGA) |
| RoHS ステータス | Compliant |
P5010NSE1QMB557 1295-fcpbga (37.5 x 37.5 mm) ピン配置ガイド
P5010NSE1QMB557 (1295-fcpbga (37.5 x 37.5 mm) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: P5010NSE1QMB557.
詳細は データシート をご参照ください。
主な用途
P5010NSE1QMB557 の用途: 6 件s: Enterprise Edge Routers, Unified Threat Management (UTM) Appliances, Industrial Control Gateways, Network-Attached Storage (NAS) Controllers, Wireless Base Station Controllers, Smart Grid Communication Concentrators.
Enterprise Edge Routers
The P5010NSE1QMB557 is well suited for enterprise edge router control-plane processing. Its single-core e5500 at 2.0 GHz delivers deterministic low-latency routing protocol execution (BGP, OSPF, IS-IS) where consistent response times matter more than aggregate throughput. The integrated Gigabit and 10-Gigabit Ethernet MACs reduce external PHY count, while the DDR3 controller with ECC ensures reliable operation across extended temperature ranges typical of telecom closet installations. Engineers typically pair this MPU with external switch fabric ASICs to handle data-plane forwarding, allowing the P5010 to focus on management and routing-table lookups.
おすすめ
Unified Threat Management (UTM) Appliances
In UTM firewalls the P5010NSE1QMB557 handles security policy enforcement, IPSec/SSL VPN termination, and anti-malware coordination. The integrated security engine accelerates AES, 3DES, and SHA operations at line rate, while the 2.0 GHz core runs DPI engines and policy decision logic. The 1295-FCPBGA package supports the thermal envelope required for fan-cooled 1U rackmount appliances. Engineers should size DDR3 to 4-8 GB to accommodate concurrent flow tables and threat-signature caches.
おすすめ
Industrial Control Gateways
The P5010NSE1QMB557's -40C to +105C industrial temperature range and 64-bit processing make it a fit for industrial gateways bridging fieldbus protocols (PROFINET, EtherCAT, Modbus TCP) with cloud connectivity. Its PCIe Gen 2 controllers support industrial expansion cards for CAN, RS-485, or wireless modules. The deterministic e5500 core ensures real-time protocol handling without jitter from context switches. Typical deployments include SCADA aggregators and predictive-maintenance gateways in factory automation.
おすすめ
Network-Attached Storage (NAS) Controllers
NAS controllers benefit from the P5010NSE1QMB557's combination of 64-bit DDR3 bandwidth and integrated multi-gigabit Ethernet for storage I/O aggregation. The single-core architecture simplifies RAID management software stacks, while the security engine accelerates SMB/Kerberos authentication. The PCIe interface supports SAS/SATA controller ASICs for multi-drive bays. Engineers typically implement iSCSI or NFS target services here, with file-system caching benefiting from the 1 MB L2 cache.
おすすめ
Wireless Base Station Controllers
In small-cell and pico-cell base stations, the P5010NSE1QMB557 manages the backhaul link and baseband coordination between Layer 1 DSP/FPGA accelerators and the core network. The 2.0 GHz e5500 core processes the S1/X2 interfaces, while the high-speed SerDes links connect to baseband ASICs. The industrial temperature rating supports outdoor enclosure deployment. Engineers integrate timing synchronization (IEEE 1588) using the MPU's hardware timestamping capabilities.
おすすめ
Smart Grid Communication Concentrators
Utility communication concentrators aggregate data from thousands of smart meters via PLC, RF mesh, or cellular backhaul. The P5010NSE1QMB557's 64-bit processing handles DLMS/COSEM and IEC 61850 protocol stacks with deterministic latency. The extended temperature rating suits outdoor cabinet installations. Integrated crypto acceleration secures AMI communications while the Ethernet interfaces link to substation networks. The FCPBGA package's thermal envelope supports sealed enclosure designs.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: P5010NSE1QMB557 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | P5010NSE1QMB | P5010NSE1MMB | P5020NSE1QMB | P5020NSE1MMB | P5010NSN1QMB |
|---|---|---|---|---|---|---|
| Package | 1295-FCPBGA (37.5x37.5) | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same | 1295-FCPBGA (37.5x37.5) - same family | 1295-FCPBGA (37.5x37.5) - same family | 1295-FCPBGA (37.5x37.5) - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core Count | 1 x e5500 | 1 x e5500 | 1 x e5500 | 2 x e5500 | 2 x e5500 | 1 x e5500 |
| Core Frequency | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 2.0 GHz | 1.6 GHz |
| Memory Controller | 64-bit DDR3/DDR3L with ECC | 64-bit DDR3/DDR3L with ECC | 64-bit DDR3/DDR3L with ECC | 64-bit DDR3/DDR3L with ECC | 64-bit DDR3/DDR3L with ECC | 64-bit DDR3/DDR3L with ECC |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +105C |
| L2 Cache | 1 MB | 1 MB | 1 MB | 1 MB per core (2 MB total) | 1 MB per core (2 MB total) | 1 MB |
| Architecture | PowerPC e5500 | PowerPC e5500 | PowerPC e5500 | PowerPC e5500 | PowerPC e5500 | PowerPC e5500 |
主な差別化要因
- Single-core deterministic performance with industrial temperature grade （vs P5020NSE1QMB)
- Full NXP QorIQ P5 silicon compatibility with ordering-code suffix flexibility （vs P5010NSE1QMB)
- Lower-frequency variant available within same package for power-constrained designs （vs P5010NSN1QMB)
設計ノート
The 1295-ball FCPBGA requires a 12+ layer PCB stackup with 0.4 mm pitch ball escape. Use via-in-pad with filled and plated-over vias for the inner rows to route out cleanly. SerDes differential pairs (100-ohm) must be length-matched to within 150 mils across the lane, and DDR3 byte-lane matching should target 25 mils. According to NXP hardware specifications, decouple each power rail with bulk ceramic capacitors and high-frequency 0402 capacitors within 100 mils of the balls.
Estimated: at 2.0 GHz with typical industrial workload, the P5010NSE1QMB557 dissipates 8-15 W. With the 1295-FCPBGA theta_JA around 12 C/W and a heatsink rated at 3 C/W, the junction temperature rise above ambient is approximately (10 W x 15 C/W) = 150C ambient-above without airflow. Use a copper heat-spreader plus 1 m/s airflow, or thermal interface material rated for the extended -40C to +105C range. Validate with thermal probes during worst-case testing.
Do not confuse the P5010NSE1QMB557 with the P5020 variant - the dual-core P5020 needs firmware initialization for both cores and may behave differently in single-threaded benchmarks. When sourcing from secondary distributors, verify the security engine revision against your software stack's requirements, since earlier silicon revisions lacked some cryptographic accelerators. The 557 packing suffix denotes tape-and-reel/tray packing, not silicon revision - this part shares the same die as P5010NSE1QMB.
コンプライアンス情報
RoHS compliant per NXP product declaration. Not AEC-Q100 qualified - this is a communications MPU, not an automotive device. Industrial temperature grade -40C to +105C supports outdoor cabinet installations.
