PCA9536DG4 - 4-Bit I2C I/O Expander | Texas Instruments
部品番号: PCA9536DG4 ✓ 生産中PCA9536DG4 概要
An I/O expander is an interface IC that converts a serial control bus into additional parallel input or output lines. The PCA9536 belongs to the I2C interface-controller hierarchy and is used when a microcontroller has too few GPIO pins for sensors, switches, indicators, relays, or other external hardware. Its configuration registers allow each port line to be programmed as an input or output, making the device useful in designs where the exact pin direction must be established by firmware.
The PCA9536 provides a 2.3 V to 5.5 V operating supply range, I2C/SMBus communication up to 400 kHz, and low standby current, with a maximum standby current of 1 µA. The 8-SOIC package provides a compact surface-mount footprint for applications that need more I/O capacity without adding a large number of individual GPIO connections. The device also supports remote I/O expansion for common microcontroller families through the I2C interface.
The PCA9536 uses separate serial clock and serial data lines, SCL and SDA, for communication with the controller. Configuration registers determine whether the four port lines operate as inputs or outputs, while output data registers control the state of output pins. This arrangement allows firmware to scan inputs, update outputs, and implement debounce or device-specific control routines through a shared serial bus.
Typical applications include low-pin-count industrial controllers, sensor and relay interface boards, compact consumer devices, LED or switch control systems, and microcontroller designs requiring additional GPIO lines. When using the PCA9536, confirm the controller's I2C address configuration and the intended input or output mode for each port pin. The host system must also account for pull-up requirements and electrical limits when connecting external signals.
The main design consideration is bus and I/O planning. Assign addresses and directions consistently across all connected devices, keep external signals within the device's specified limits, and use appropriate pull-up resistors on SCL and SDA. Because the PCA9536DG4 is only an I/O expander, functions such as analog conversion, level shifting, and high-current drive usually require additional components.
This product page combines the manufacturer device description with distributor listing information and practical application guidance for engineers evaluating the PCA9536DG4. It also identifies compatible same-package alternatives, summarizes the key register and interface considerations, and highlights where additional external circuitry is needed for complete embedded I/O designs.
ドロップイン代替品: PCA9536DG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PCA9536DG4 （同一形状・フットプリント） — 相違点: Configuration Registers, Package, Product Type.
PCA9536DGKRG4
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PCA9536DR
✅ ドロップイン価格はお問い合わせください
データシートを見る →PCA9536D
✅ ドロップイン価格はお問い合わせください
データシートを見る →PCA9536DG4R
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PCA9536DGS
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PCA9536DG4 仕様
| Product Type | 4-bit I2C/SMBus remote I/O expander |
| Number of I/O Lines | 4 |
| Operating Supply Voltage Range | 2.3 V to 5.5 V |
| I2C/SMBus Maximum Frequency | 400 kHz |
| Standby Current | 1 uA maximum |
| 電源電流 | 0.15 mA maximum |
| Maximum Operating Temperature | 85 C |
| パッケージ | 8-pin SOIC |
| インターフェース | I2C/SMBus |
| Serial Clock Pin | SCL |
| Serial Data Pin | SDA |
| Configuration Registers | Yes |
| 実装タイプ | Surface Mount |
PCA9536DG4 8-pin soic ピン配置ガイド
PCA9536DG4 (8-pin soic パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。
詳細なピン配置データはありません: PCA9536DG4.
詳細は データシート をご参照ください。
主な用途
PCA9536DG4 の用途: 6 件s: Low-Pin-Count MCU I/O Expansion, Industrial Sensor Interface, LED and Indicator Control, Relay and Discrete Control Signals, Compact Consumer Control Board, Communications Equipment Port Control.
Low-Pin-Count MCU I/O Expansion
The PCA9536DG4 fits designs in which a microcontroller has reserved most of its GPIO pins for core functions. Its four programmable I/O lines can be assigned individually as inputs or outputs, while SCL and SDA provide control over the complete port through the I2C bus. The 2.3 V to 5.5 V operating range supports common embedded supply levels, and the 400 kHz interface rate allows efficient updates when several devices share the bus. A host MCU such as one of the STM32 families can read switch states or control external logic without consuming additional direct GPIO pins.
おすすめ
Industrial Sensor Interface
The PCA9536DG4 can collect digital sensor or limit-switch information when an industrial controller lacks direct input pins. Each of the four lines can be configured as an input, allowing status, alarm, interlock, or presence signals to be monitored through SCL and SDA. The device operates from 2.3 V to 5.5 V and supports bus communication up to 400 kHz, which helps preserve controller resources for more demanding processing. Designers should add appropriate input conditioning, isolation, or protection where field wiring exposes the board to transients or unsuitable logic levels.
おすすめ
LED and Indicator Control
The PCA9536DG4 is useful for grouped status indicators, panel lamps, or low-current LED controls when the controller cannot drive them directly. Its configuration registers let firmware assign each of the four outputs independently, while the serial interface keeps the wiring compact. The 1 uA maximum standby current helps maintain low quiescent demand in intermittently powered equipment, although the complete system must also account for output-state leakage and any driver circuitry. A separate transistor stage is appropriate when an LED bank requires more current than the I/O port can safely source.
おすすめ
Relay and Discrete Control Signals
The PCA9536DG4 can provide logic-level control and status signals for relay boards, contactors, or discrete control circuits. Its four configurable outputs reduce the number of direct host-controller connections, while firmware-controlled direction and data registers simplify sequencing. The 2.3 V to 5.5 V range permits operation in embedded 3.3 V and 5 V systems, and the 400 kHz bus rate supports quick updates. Actual inductive loads should be isolated from the I/O pins with suitable transistors, flyback protection, and grounding designed for the application.
おすすめ
Compact Consumer Control Board
In a compact consumer device, the PCA9536DG4 can add configurable buttons, mode indicators, or accessory-control lines without requiring a larger microcontroller package. The small 8-pin SOIC format supports dense PCB layouts, and the I2C interface allows the host processor to update several port lines using only SCL and SDA. Its low standby current is advantageous for energy-conscious portable products, while the 2.3 V minimum operating voltage accommodates lower-voltage logic systems. Firmware should define defaults for port direction and output state so the external hardware remains predictable during reset.
おすすめ
Communications Equipment Port Control
The PCA9536DG4 can provide local control and status lines in communications equipment where the main processor manages an external transceiver or modem. Four inputs can monitor module-ready, fault, or link-state signals, while outputs can select modes or acknowledge peripheral events. Supporting I2C operation up to 400 kHz permits efficient register access without dedicating four host GPIO pins to each peripheral. Designers should keep control traces away from sensitive analog paths and apply the manufacturer's input and output limits when interfacing with powered modules.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PCA9536DG4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PCA9536DGKRG4 | PCA9536DR | PCA9536D | PCA9536DG4R | PCA9536DGS |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Product Function | 4-bit I2C/SMBus remote I/O expander | 4-bit I2C/SMBus remote I/O expander | 4-bit I2C/SMBus remote I/O expander | 4-bit I2C/SMBus remote I/O expander | 4-bit I2C/SMBus remote I/O expander | 4-bit I2C/SMBus remote I/O expander |
| Number of I/O Lines | 4 | 4 | 4 | 4 | 4 | 4 |
| Operating Supply Voltage | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Maximum Frequency | 400 kHz | 400 kHz | 400 kHz | 400 kHz | 400 kHz | 400 kHz |
主な差別化要因
- Compact four-line expansion in an 8-pin SOIC （vs PCA9554DWR)
- Same core I2C/SMBus interface and supply range across the PCA9536 options （vs PCA9536DR)
- Low standby current for embedded and portable control boards （vs PCA9536DGKRG4)
設計ノート
Place the PCA9536DG4 close to the controller and the devices connected to its four I/O lines. Keep SCL and SDA routing short, avoid long stubs, and route the bus away from switching nodes and high-current paths. The SOIC footprint requires adequate solder-joint clearance and inspection access, particularly in densely populated consumer equipment.
Connect the supply pins to the device's specified operating range of 2.3 V to 5.5 V and place local supply decoupling close to the IC. The device's maximum supply current is 0.15 mA, but total board demand also includes pull-up resistors and attached external circuits. Confirm that the host controller's I2C pins and pull-up network produce valid logic levels at the expander.
Do not assume that every PCA9536 orderable suffix is automatically interchangeable. Verify the package, pin names, electrical limits, temperature range, and device address before substitution. Also configure each port direction explicitly in firmware and provide safe defaults during reset, because external pull resistors can otherwise influence the state of an input or output line.
コンプライアンス情報
The available product-page and distributor excerpts do not state suffix-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Review the current TI compliance declarations for the exact PCA9536DG4 order code.