PCM1719EG4 - 18-Bit Stereo Audio DAC | Texas Instruments
部品番号: PCM1719EG4 ✓ 生産中PCM1719EG4 概要
An audio DAC converts digital PCM samples into left- and right-channel analog voltages suitable for headphone, line-output, or subsequent analog amplification stages. Within the signal-chain hierarchy, the PCM1719EG4 is a stereo audio DAC, a digital-to-analog converter, and a signal-conversion integrated circuit. Its integrated filtering and headphone output reduce the number of external components required in a conventional consumer-audio design.
Key features include acceptance of 18-bit input data, complete stereo conversion, 8-times oversampling, and integrated analog and digital filtering. The converter operates at 5 V, has an indicated supply current of 25 mA, and is specified over a -40°C to +85°C temperature range. These characteristics suit compact multimedia systems where low component count and direct headphone drive are more important than a high-resolution audiophile architecture.
Technically, the PCM1719EG4 combines a digital interpolation stage, a multi-level delta-sigma modulator, and an analog low-pass reconstruction filter. Oversampling and digital filtering remove high-frequency imaging components before the delta-sigma stage, while the analog filter suppresses remaining switching-related energy at the converter output. Its serial interface is intended for digital audio sources rather than parallel or I2C control.
Typical uses include CD-player and digital-audio accessory designs, portable consumer equipment, notebook sound systems, and other stereo audio products. In these applications, the converter can receive serial PCM data, generate left and right analog outputs, and use its integrated headphone amplifier to drive a headphone load directly when signal levels and impedance remain within the device operating limits.
For implementation, follow the manufacturer pin-description table when routing the serial interface, analog supplies, analog ground, and headphone outputs. Decoupling capacitors should be placed close to their associated supply pins, while analog and digital return currents should follow the layout guidance in the manufacturer datasheet. Confirm output loading, startup behavior, and the selected sampling frequency before finalizing the analog filter and headphone network.
This page organizes the converter’s core specifications, application guidance, package information, and qualifying drop-in alternatives into an engineering-focused reference. It also highlights where replacement parts differ in resolution, filtering, interface behavior, or output stage capability, helping designers verify compatibility before modifying an existing PCB.
ドロップイン代替品: PCM1719EG4 — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PCM1719EG4 (同一形状・フットプリント) — 相違点: Package, Package Type, DAC Architecture, Dynamic Range, Resolution.
PCM1719E
✅ ドロップイン価格はお問い合わせください
データシートを見る →PCM1716EG4
✅ ドロップイン価格はお問い合わせください
データシートを見る →PCM1717E
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PCM1718E
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PCM1720E
✅ ドロップイン ⚠️ 仕様未検証価格はお問い合わせください
データシートを見る →PCM1719EG4 最大定格&電気的特性
| Converter Type | Stereo audio digital-to-analog converter |
| 分解能 | 18 bit |
| Data Interface | Serial |
| Supported Sample Rate | 48 kHz |
| Digital Filter Oversampling | 8 times |
| DAC Architecture | Multi-level delta-sigma |
| Analog Filter | On-chip low-pass filter |
| Headphone Amplifier | On-chip |
| 電源電圧 | 5 V |
| 電源電流 | 25 mA |
| 動作温度範囲 | -40°C to +85°C |
| Linearity Error | 5% |
| パッケージ | 28-SSOP, 5.30 mm width |
| Package Type | Gull-wing SSOP |
| Number of Terminals | 28 |
| Packaging | Tube |
| 実装タイプ | Surface mount |
PCM1719EG4 gull-wing ssop ピン配置ガイド
PCM1719EG4 (gull-wing ssop パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: PCM1719EG4.
詳細は データシート をご参照ください。
主な用途
PCM1719EG4 の用途: 6 件s: CD Player Audio Output, Portable Audio Headphone Driver, Notebook Computer Audio, Digital Audio Accessory, Multimedia Amplifier Front End, Industrial Audio Control Panel.
CD Player Audio Output
The PCM1719EG4 fits CD-player and digital-audio accessory designs that convert serial PCM samples into a stereo analog output. Its 18-bit interface, 48 kHz operation, 8-times oversampling digital filter, and analog low-pass filter provide a compact signal path without requiring separate interpolation and reconstruction stages. The device is used between a digital audio source and line-level or headphone circuitry, reducing board area while retaining left and right channel separation. Designers should confirm the source's master-clock and data format, connect the appropriate bypass capacitors close to the supply pins, and validate the output level against the following amplifier or headphone network.
おすすめ
Portable Audio Headphone Driver
The PCM1719EG4 is suitable for compact portable-audio products where a serial digital source must drive stereo headphones through an integrated output stage. Its on-chip headphone amplifier removes the need for a separate headphone buffer when the selected impedance and signal level remain within the device limits, while the 5 V supply simplifies integration with regulated portable-system rails. The 18-bit conversion path and 48 kHz operation support conventional CD-rate audio. Design work should focus on clean headphone return routing, load compatibility, startup behavior, and adequate supply decoupling rather than assuming the integrated amplifier can support every high-impedance or high-power headphone.
おすすめ
Notebook Computer Audio
The PCM1719EG4 can serve as the stereo audio conversion stage in notebook and docking-system audio paths. Its integrated digital filter, analog reconstruction filter, and headphone amplifier create a compact subsystem for converting host audio data into line and headphone outputs. The 25 mA indicated supply current and 5 V operating requirement simplify comparison with portable power budgets, although the complete system must include regulator headroom and startup sequencing. Board layout should keep serial clock and data traces away from headphone outputs, maintain a continuous analog-ground return, and follow the manufacturer recommendations for separating digital switching currents from sensitive audio paths.
おすすめ
Digital Audio Accessory
The PCM1719EG4 is appropriate for USB, optical, network, or embedded digital-audio accessories that need a conventional 18-bit stereo output stage. Its serial interface accepts digital audio from a host controller, while its integrated filtering and headphone output reduce the number of external signal-chain blocks. This makes the converter useful in compact external audio adapters where the priority is low component count and straightforward analog output. The host interface must provide the required clocking and data framing, and the accessory designer should evaluate grounding, connector-ground isolation, and output-noise performance with the complete enclosure and power-supply arrangement.
おすすめ
Multimedia Amplifier Front End
The PCM1719EG4 can provide the DAC and analog reconstruction stage ahead of a multimedia power amplifier. Its 8-times oversampling digital filter and on-chip analog low-pass filter create filtered left and right outputs suitable for coupling into a voltage-gain or headphone amplifier, depending on the chosen circuit. Using an integrated converter reduces board area compared with a discrete discrete-component reconstruction path and helps standardize the interface with digital audio sources. Before implementation, confirm the analog output amplitude, DC offset behavior, output impedance, and whether the downstream amplifier requires a different coupling or gain structure.
おすすめ
Industrial Audio Control Panel
The PCM1719EG4 can be used in industrial audio panels or control terminals that reproduce stereo notification, interface, or media sounds from an embedded digital source. Its 18-bit conversion, 48 kHz operation, integrated filtering, and single 5 V supply simplify implementation in space-constrained control electronics. The -40°C to +85°C specified operating range supports industrial-environment evaluation when the complete assembly, display, communications hardware, and power supply remain within their respective limits. Layout should separate the converter's analog section from switching regulators and high-current actuator drivers, while system testing should verify audible noise, startup transients, and connector grounding.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PCM1719EG4 — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PCM1719E | PCM1716EG4 | PCM1717E | PCM1718E | PCM1720E |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 28-SSOP (0.209, 5.30 mm width) | 28-SSOP (0.209, 5.30 mm width) | 28-SSOP (0.209, 5.30 mm width) | 28-SSOP (0.209, 5.30 mm width) | 28-SSOP (0.209, 5.30 mm width) | 28-SSOP (0.209, 5.30 mm width) |
主な差別化要因
- Integrated conversion, filtering, and headphone output (vs PCM1716EG4)
- Direct relationship with the PCM1719 family ordering (vs PCM1720E)
- Same 18-SSOP family package as the PCM1719E catalog device (vs PCM1719E)
設計ノート
Place the manufacturer-recommended bypass capacitors directly beside the analog and digital supply pins, with short ground returns. Route the serial clock, data, and latch signals away from the headphone outputs and analog input references. The 28-SSOP footprint requires adequate clearance between adjacent pins, so inspect solder-mask spacing and paste volume before releasing a fine-pitch assembly. Use the package drawing and land pattern from the Texas Instruments documentation when defining the PCB footprint.
Keep the PCM1719EG4 analog return path continuous and free of switching-current junctions. Connect analog and digital ground references according to the manufacturer layout guidance, and keep high-current headphone return current from sharing narrow analog-ground segments. For systems containing a switching regulator or display converter, maintain separation between those components and the converter pins. This arrangement reduces the chance that supply ripple or ground displacement will appear directly in the left or right output.
Do not equate an 18-bit converter label with an 18-bit audible output path; the usable result also depends on the source data, clocking, digital filter, analog reconstruction filter, grounding, and output stage. Confirm the supported sampling rate, serial data format, master-clock relationship, and headphone load before layout is released. A shared 28-SSOP package is necessary for a drop-in consideration but does not by itself prove pin-to-pin or functional equivalence.
The PCM1719EG4 operates from 5 V and has an indicated supply current of 25 mA. Provide regulator headroom for startup, clock-interface activity, headphone-output demand, and local bypass-capacitor charging. Do not size the rail from the nominal 25 mA figure alone; use the worst-case electrical limits and the complete output-load configuration. Verify that the upstream regulator remains stable with the selected bypass capacitance and any additional analog load.
コンプライアンス情報
The PCM1719EG4 is a legacy 5 V consumer-audio DAC in a 28-SSOP tube package. Compliance declarations are not stated in the available product information and therefore remain unknown.