Texas Instruments

PCM1719EG4 - 18-Bit Stereo Audio DAC | Texas Instruments

Артикул: PCM1719EG4 ✓ Активен
5 V Vdss 25 mA Id 28-SSOP, 5.30 mm width Package
MOQ: 1 |

PCM1719EG4 Обзор

The Texas Instruments PCM1719EG4 is an 18-bit stereo audio digital-to-analog converter with an 8-times oversampling digital filter, a multi-level delta-sigma DAC, an analog low-pass filter, and an on-chip headphone amplifier. It accepts serial audio data, operates from a 5 V supply, and is packaged in a 28-pin SSOP.

An audio DAC converts digital PCM samples into left- and right-channel analog voltages suitable for headphone, line-output, or subsequent analog amplification stages. Within the signal-chain hierarchy, the PCM1719EG4 is a stereo audio DAC, a digital-to-analog converter, and a signal-conversion integrated circuit. Its integrated filtering and headphone output reduce the number of external components required in a conventional consumer-audio design.

Key features include acceptance of 18-bit input data, complete stereo conversion, 8-times oversampling, and integrated analog and digital filtering. The converter operates at 5 V, has an indicated supply current of 25 mA, and is specified over a -40°C to +85°C temperature range. These characteristics suit compact multimedia systems where low component count and direct headphone drive are more important than a high-resolution audiophile architecture.

Technically, the PCM1719EG4 combines a digital interpolation stage, a multi-level delta-sigma modulator, and an analog low-pass reconstruction filter. Oversampling and digital filtering remove high-frequency imaging components before the delta-sigma stage, while the analog filter suppresses remaining switching-related energy at the converter output. Its serial interface is intended for digital audio sources rather than parallel or I2C control.

Typical uses include CD-player and digital-audio accessory designs, portable consumer equipment, notebook sound systems, and other stereo audio products. In these applications, the converter can receive serial PCM data, generate left and right analog outputs, and use its integrated headphone amplifier to drive a headphone load directly when signal levels and impedance remain within the device operating limits.

For implementation, follow the manufacturer pin-description table when routing the serial interface, analog supplies, analog ground, and headphone outputs. Decoupling capacitors should be placed close to their associated supply pins, while analog and digital return currents should follow the layout guidance in the manufacturer datasheet. Confirm output loading, startup behavior, and the selected sampling frequency before finalizing the analog filter and headphone network.

This page organizes the converter’s core specifications, application guidance, package information, and qualifying drop-in alternatives into an engineering-focused reference. It also highlights where replacement parts differ in resolution, filtering, interface behavior, or output stage capability, helping designers verify compatibility before modifying an existing PCB.

Аналоги без доработки для PCM1719EG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с PCM1719EG4 (тот же форм-фактор и посадочное место) — отличается по Package, Package Type, DAC Architecture, Dynamic Range, Resolution.

Texas Instruments
Package: 20-SSOP, 5.30 mm width
Сравнить с PCM1719EG4 →
Texas Instruments
Package: 20-pin SSOP
DAC Architecture: Multilevel delta-sigma DAC
Dynamic Range: 96 dB
Сравнить с PCM1719EG4 →
Texas Instruments
Package Type: 28-pin SSOP
Dynamic Range: 96 dB
Сравнить с PCM1719EG4 →
Texas Instruments
Package Type: 20-SSOP
Dynamic Range: 96dB
Resolution: 24 bit
Сравнить с PCM1719EG4 →

PCM1719E

✅ Прямая замена
Texas Instruments
📦 28-SSOP (0.209, 5.30 mm width)
Stereo audio digital-to-analog converter · 18 bit · I2S · 48 kHz · 2 channels · 8-times · Multi-level delta-sigma · Integrated analog low-pass filter

Уточнить цену

Открыть даташит →

PCM1716EG4

✅ Прямая замена
Texas Instruments
📦 28-SSOP (0.209, 5.30 mm width)
Stereo audio digital-to-analog converter · CMOS delta-sigma DAC · 24 bit · 96 kHz · I2S · 2 channels · -96 dB · 5 V

Уточнить цену

Открыть даташит →

PCM1717E

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 28-SSOP (0.209, 5.30 mm width)
Stereo audio digital-to-analog converter · 18 bit · 48 kHz · 2 channels · I2S · Delta-sigma DAC · 8X · 18-bit input data

Уточнить цену

Открыть даташит →

PCM1718E

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 28-SSOP (0.209, 5.30 mm width)
Stereo audio digital-to-analog converter · 18 bit · 48 kHz · I2S · Stereo · 100 dB · 96 dB · -90 dB

Уточнить цену

Открыть даташит →

PCM1720E

✅ Прямая замена ⚠️ Характеристики не проверены
Texas Instruments
📦 28-SSOP (0.209, 5.30 mm width)
Stereo audio digital-to-analog converter · 24 bit · 96kHz · I2S · 96dB · 8x at all sampling frequencies · 256fS/384fS · 24-bit input data

Уточнить цену

Открыть даташит →

PCM1719EG4 Максимальные параметры и электрические характеристики

Converter Type Stereo audio digital-to-analog converter
Разрешение 18 bit
Data Interface Serial
Supported Sample Rate 48 kHz
Digital Filter Oversampling 8 times
DAC Architecture Multi-level delta-sigma
Analog Filter On-chip low-pass filter
Headphone Amplifier On-chip
Напряжение питания 5 V
Ток потребления 25 mA
Диапазон рабочих температур -40°C to +85°C
Linearity Error 5%
Корпус 28-SSOP, 5.30 mm width
Package Type Gull-wing SSOP
Number of Terminals 28
Packaging Tube
Тип монтажа Surface mount

Руководство по цоколевке PCM1719EG4 в корпусе gull-wing ssop

Цоколевка для PCM1719EG4 (корпус gull-wing ssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса gull-wing ssop для PCM1719EG4

Нет подробных данных о распиновке для PCM1719EG4.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

PCM1719EG4 подходит для 6 применениеs: CD Player Audio Output, Portable Audio Headphone Driver, Notebook Computer Audio, Digital Audio Accessory, Multimedia Amplifier Front End, Industrial Audio Control Panel.

🎧

CD Player Audio Output

The PCM1719EG4 fits CD-player and digital-audio accessory designs that convert serial PCM samples into a stereo analog output. Its 18-bit interface, 48 kHz operation, 8-times oversampling digital filter, and analog low-pass filter provide a compact signal path without requiring separate interpolation and reconstruction stages. The device is used between a digital audio source and line-level or headphone circuitry, reducing board area while retaining left and right channel separation. Designers should confirm the source's master-clock and data format, connect the appropriate bypass capacitors close to the supply pins, and validate the output level against the following amplifier or headphone network.

📱

Portable Audio Headphone Driver

The PCM1719EG4 is suitable for compact portable-audio products where a serial digital source must drive stereo headphones through an integrated output stage. Its on-chip headphone amplifier removes the need for a separate headphone buffer when the selected impedance and signal level remain within the device limits, while the 5 V supply simplifies integration with regulated portable-system rails. The 18-bit conversion path and 48 kHz operation support conventional CD-rate audio. Design work should focus on clean headphone return routing, load compatibility, startup behavior, and adequate supply decoupling rather than assuming the integrated amplifier can support every high-impedance or high-power headphone.

💻

Notebook Computer Audio

The PCM1719EG4 can serve as the stereo audio conversion stage in notebook and docking-system audio paths. Its integrated digital filter, analog reconstruction filter, and headphone amplifier create a compact subsystem for converting host audio data into line and headphone outputs. The 25 mA indicated supply current and 5 V operating requirement simplify comparison with portable power budgets, although the complete system must include regulator headroom and startup sequencing. Board layout should keep serial clock and data traces away from headphone outputs, maintain a continuous analog-ground return, and follow the manufacturer recommendations for separating digital switching currents from sensitive audio paths.

🧩

Digital Audio Accessory

The PCM1719EG4 is appropriate for USB, optical, network, or embedded digital-audio accessories that need a conventional 18-bit stereo output stage. Its serial interface accepts digital audio from a host controller, while its integrated filtering and headphone output reduce the number of external signal-chain blocks. This makes the converter useful in compact external audio adapters where the priority is low component count and straightforward analog output. The host interface must provide the required clocking and data framing, and the accessory designer should evaluate grounding, connector-ground isolation, and output-noise performance with the complete enclosure and power-supply arrangement.

🔊

Multimedia Amplifier Front End

The PCM1719EG4 can provide the DAC and analog reconstruction stage ahead of a multimedia power amplifier. Its 8-times oversampling digital filter and on-chip analog low-pass filter create filtered left and right outputs suitable for coupling into a voltage-gain or headphone amplifier, depending on the chosen circuit. Using an integrated converter reduces board area compared with a discrete discrete-component reconstruction path and helps standardize the interface with digital audio sources. Before implementation, confirm the analog output amplitude, DC offset behavior, output impedance, and whether the downstream amplifier requires a different coupling or gain structure.

🏭

Industrial Audio Control Panel

The PCM1719EG4 can be used in industrial audio panels or control terminals that reproduce stereo notification, interface, or media sounds from an embedded digital source. Its 18-bit conversion, 48 kHz operation, integrated filtering, and single 5 V supply simplify implementation in space-constrained control electronics. The -40°C to +85°C specified operating range supports industrial-environment evaluation when the complete assembly, display, communications hardware, and power supply remain within their respective limits. Layout should separate the converter's analog section from switching regulators and high-current actuator drivers, while system testing should verify audible noise, startup transients, and connector grounding.

What is the PCM1719EG4?
The PCM1719EG4 is an 18-bit stereo audio DAC from Texas Instruments with an 8-times oversampling digital filter, a multi-level delta-sigma DAC, an analog low-pass filter, and an on-chip headphone amplifier. According to the Texas Instruments PCM1719 datasheet, it accepts serial audio data, operates from 5 V, and is packaged in a 28-SSOP. The integrated filtering and headphone stage simplify compact consumer-audio designs.
What are the key specifications of PCM1719EG4 that engineers should know?
The PCM1719EG4 is an 18-bit stereo DAC with a serial interface, 48 kHz supported operation, 8-times oversampling, and integrated analog filtering. Texas Instruments specifies a 5 V supply, 25 mA supply current, -40°C to +85°C operating range, and 5% linearity error. The device uses a 28-SSOP package and includes an on-chip headphone amplifier, making it a compact solution for stereo audio signal conversion.
Where can I download the PCM1719EG4 datasheet PDF?
The official PCM1719EG4 datasheet PDF is available from the Texas Instruments product-document link at https://www.ti.com/lit/ds/symlink/pcm1719.pdf. The document contains the electrical characteristics, serial interface details, pin descriptions, application information, and recommended external circuits. Use its pin-description table when assigning PCB signals and its typical application circuit when selecting decoupling and output-network components.
Where can I find the PCM1719EG4 pinout?
The PCM1719EG4 pinout is defined in the pin-description section of the Texas Instruments PCM1719 datasheet. The component uses a 28-SSOP package with gull-wing leads, and the package contains 28 terminals. Use the numbered pin table and package drawing together when assigning the serial data, clock, latch, power, ground, analog-output, and headphone-output nets.
Is PCM1719EG4 suitable for stereo audio and headphone applications?
Yes, the PCM1719EG4 is designed for stereo audio conversion and includes an on-chip headphone amplifier. Its 18-bit interface, 8-times oversampling digital filter, and analog low-pass filter support direct conversion of serial PCM audio into left and right analog outputs. Verify the required sample rate, supported input format, headphone impedance, and output amplitude against the manufacturer datasheet before finalizing the design.
PCM1719EG4 vs PCM1719E - which is the better replacement?
The PCM1719E and PCM1719EG4 are closely related Texas Instruments catalog entries associated with the same 18-bit, 48 kHz stereo DAC family and 28-SSOP package. The PCM1719E listing identifies a 28-SSOP device, while PCM1719EG4 is specifically listed in tube packaging. Check the ordered-device suffix, pin assignment, temperature grade, and package quantity on the manufacturer labeling before using either ordering code as an interchangeable supply choice.
When should I choose PCM1719EG4 instead of PCM1716EG4?
Choose PCM1719EG4 when the design needs its 18-bit stereo DAC architecture, 8-times oversampling filter, integrated analog low-pass filter, and on-chip headphone amplifier. A PCM1716EG4 may be considered only after confirming that its interface, filter characteristics, output circuitry, and pin assignments match the target board. The devices belong to the same PCM171x family but are not automatically equivalent merely because both use a 28-SSOP package.
Is PCM1719EG4 suitable for a CD-player or portable audio design?
The PCM1719EG4 fits CD-player and portable-audio designs that use serial PCM data and require a compact stereo converter with integrated filtering. Its 5 V supply, 18-bit resolution, 48 kHz operation, and integrated headphone amplifier can reduce external circuitry. Portable products must still verify battery-rail regulation, startup sequencing, thermal conditions, and the allowable headphone load.
What can replace PCM1719EG4?
A replacement for PCM1719EG4 must match the 28-SSOP footprint, pin assignments, serial audio interface, clock requirements, supply arrangement, and analog-output expectations. The PCM1719E is the closest catalog alternative listed for evaluation, while PCM1716EG4 and other PCM171x-family devices require individual pin and feature verification. Request a quote on this page for current sourcing, and do not assume that a shared package proves drop-in compatibility.
What is the best equivalent for PCM1719EG4?
No cross-brand equivalent can be confirmed from the available compatibility information, so the PCM1719E and selected PCM171x-family devices are the only alternatives considered here. A valid substitute must provide pin-to-pin compatibility in the 28-SSOP footprint and preserve the required 18-bit serial interface, filter behavior, supply pins, and headphone outputs. Confirm the complete pin list and electrical limits before approving a replacement.
How do I design the power and ground connections for PCM1719EG4?
Connect the PCM1719EG4 according to the manufacturer application circuit, placing the recommended bypass capacitors close to the analog and digital supply pins. Keep analog signal routing short and separate from switching-node and high-current return paths. The device operates from 5 V and draws an indicated 25 mA, but system-level supply droop, startup current, and regulator noise must be evaluated under the intended load.
Does PCM1719EG4 need an external analog low-pass filter?
The PCM1719EG4 includes an on-chip analog low-pass filter following its multi-level delta-sigma DAC stage. The external circuitry still depends on the intended output architecture, including any additional reconstruction filtering, DC blocking, attenuation, or headphone-network components required by the board. Use the manufacturer typical application circuit as the starting point and evaluate the final output response with the actual load.
Where to buy PCM1719EG4 online?
Use the Request a Quote form on this page to request current availability, order quantity, and lead time for PCM1719EG4. The manufacturer listing identifies the device as a 28-SSOP stereo audio DAC offered in tube packaging. Because inventory and order conditions can change, request the exact MPN rather than relying on a generic category listing or an abbreviated PCM1719 catalog number.
What is the price of PCM1719EG4?
The current commercial price for PCM1719EG4 should be obtained through the Request a Quote form on this page. The structured pricing system can confirm the latest unit and volume terms for the exact ordering code, including the tube packaging variant. Quote requests should state the required quantity, target date, and shipment destination so the sourcing response reflects the actual production requirement.
What is the lead time for PCM1719EG4?
The current lead time for PCM1719EG4 depends on supplier inventory, order quantity, and the required shipping destination. Submit a request through the Request a Quote form on this page and include the desired quantity and target delivery date. For production planning, treat the requested lead time as a current quotation item rather than a permanent catalogue attribute.
Is PCM1719EG4 in stock?
Current PCM1719EG4 stock should be confirmed through the Request a Quote form on this page using the exact ordering code and required quantity. Tube packaging and production quantities can affect availability even when the underlying family is active. The form provides the appropriate route for current allocation, lead time, and shipment information without substituting a different package suffix.

Справочные инженерные данные для PCM1719EG4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose PCM1719EG4 for a compact stereo audio design that accepts serial PCM data and benefits from an integrated 18-bit DAC, 8-times oversampling filter, analog low-pass filter, and headphone amplifier. PCM1719E is the first alternative to evaluate because it is listed as an 18-bit, 48 kHz device in the same 28-SSOP format. PCM1716EG4 may fit a related PCM171x design, but its filtering and interface details must be checked before replacement. PCM1717E, PCM1718E, and PCM1720E remain same-family candidates whose functional differences require a full pin and electrical review. No cross-brand substitute is confirmed, so do not approve a replacement based only on package similarity. For new production, prefer the device whose complete data interface, clocking, output loading, temperature grade, and lifecycle requirements are explicitly covered by the manufacturer documentation.

Сравнение с аналогами

Параметр Этот товар PCM1719E PCM1716EG4 PCM1717E PCM1718E PCM1720E
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 28-SSOP (0.209, 5.30 mm width) 28-SSOP (0.209, 5.30 mm width) 28-SSOP (0.209, 5.30 mm width) 28-SSOP (0.209, 5.30 mm width) 28-SSOP (0.209, 5.30 mm width) 28-SSOP (0.209, 5.30 mm width)

Ключевые отличия

  • Integrated conversion, filtering, and headphone output (против PCM1716EG4)
  • Direct relationship with the PCM1719 family ordering (против PCM1720E)
  • Same 18-SSOP family package as the PCM1719E catalog device (против PCM1719E)

Заметки по проектированию

Place the manufacturer-recommended bypass capacitors directly beside the analog and digital supply pins, with short ground returns. Route the serial clock, data, and latch signals away from the headphone outputs and analog input references. The 28-SSOP footprint requires adequate clearance between adjacent pins, so inspect solder-mask spacing and paste volume before releasing a fine-pitch assembly. Use the package drawing and land pattern from the Texas Instruments documentation when defining the PCB footprint.

Keep the PCM1719EG4 analog return path continuous and free of switching-current junctions. Connect analog and digital ground references according to the manufacturer layout guidance, and keep high-current headphone return current from sharing narrow analog-ground segments. For systems containing a switching regulator or display converter, maintain separation between those components and the converter pins. This arrangement reduces the chance that supply ripple or ground displacement will appear directly in the left or right output.

Do not equate an 18-bit converter label with an 18-bit audible output path; the usable result also depends on the source data, clocking, digital filter, analog reconstruction filter, grounding, and output stage. Confirm the supported sampling rate, serial data format, master-clock relationship, and headphone load before layout is released. A shared 28-SSOP package is necessary for a drop-in consideration but does not by itself prove pin-to-pin or functional equivalence.

The PCM1719EG4 operates from 5 V and has an indicated supply current of 25 mA. Provide regulator headroom for startup, clock-interface activity, headphone-output demand, and local bypass-capacitor charging. Do not size the rail from the nominal 25 mA figure alone; use the worst-case electrical limits and the complete output-load configuration. Verify that the upstream regulator remains stable with the selected bypass capacitance and any additional analog load.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The PCM1719EG4 is a legacy 5 V consumer-audio DAC in a 28-SSOP tube package. Compliance declarations are not stated in the available product information and therefore remain unknown.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

PCM1719EG4 datasheet PCM1719EG4 pinout PCM1719EG4 datasheet pdf PCM1719EG4 equivalent PCM1719EG4 replacement PCM1719EG4 cross reference PCM1719EG4 vs PCM1719E PCM1719EG4 footprint PCM1719EG4 application circuit PCM1719EG4 price PCM1719EG4 stock Texas Instruments PCM1719EG4 PCM1719EG4 18 bit stereo DAC PCM1719EG4 28-SSOP pinout PCM1719EG4 headphone amplifier

Связанные компоненты & термины

Texas Instruments PCM1719EG4 PCM1719E PCM1716EG4 PCM1717E PCM1718E PCM1720E stereo audio DAC digital-to-analog converter PCM171x family 18-bit resolution 48 kHz sampling rate serial audio interface 8-times oversampling delta-sigma DAC analog low-pass filter on-chip headphone amplifier SSOP 28-SSOP surface mount SMD CD-rate audio portable audio analog signal chain
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ