Texas Instruments

PCM1862DBT - 24-Bit 192kHz Stereo Audio ADC | TI

部品番号: PCM1862DBT ✓ 生産中
3.3 V Vdss 30-pin TSSOP (DBT) Package
MOQ: 1 |

PCM1862DBT 概要

Texas Instruments PCM1862DBT is a 2-channel, software-controlled audio ADC with a universal front end, 24-bit conversion, and a maximum sampling rate of 192 kSPS. It operates from a single 3.3 V supply and is housed in a 30-pin TSSOP package. The device provides 103 dB dynamic range and supports I2C and SPI control interfaces, making it suitable for compact, high-resolution audio acquisition systems.

An audio ADC is a semiconductor that converts analog left- and right-channel audio signals into digital data for processing, storage, transmission, or playback. It belongs to the signal-conversion hierarchy: ADC → data converter → integrated circuit, and it sits between an analog microphone or line-level front end and a digital signal processor, MCU, or audio codec. A universal front end integrates gain, filtering, and analog input conditioning to reduce the number of external components required in a stereo audio subsystem.

Key features include 103 dB dynamic range, 24-bit resolution, 192 kSPS maximum sampling, two analog input channels, and a single 3.3 V supply. The integrated software-controlled PGA reduces the need for discrete analog gain stages, while I2C and SPI interfaces support flexible control from embedded processors. A 30-pin TSSOP package also makes the PCM1862 practical for compact industrial, communications, and consumer audio equipment.

The PCM1862 family was developed around a universal audio front end intended to simplify high-performance end-product designs and support European Ecodesign objectives. Software configuration reduces the number of external controls and permits operating modes to be selected through the digital interface. Its single-supply operation also simplifies power architecture compared with converters requiring a separate 5 V analog rail or external programmable-gain stage.

Typical uses include microphone-array capture, voice interfaces, industrial monitoring, USB audio front ends, and embedded stereo recording. In a typical design, analog signals enter through the integrated input network, the selected PGA gain is programmed over I2C or SPI, and the resulting PCM data is transferred to a host processor. System designers must select suitable input and reference circuitry based on the source impedance, signal level, and required noise performance.

A key design consideration is the analog and digital layout. Keep input traces short, provide a quiet analog ground path, decouple the supply close to the device, and follow the manufacturer pin descriptions when assigning the 30 TSSOP connections. Verify the selected interface mode, system clock, channel mapping, and gain settings in firmware because configuration errors can appear as incorrect gain, channel interchange, or digital-format incompatibility.

This page combines the PCM1862DBT specifications, family-level drop-in options, interface guidance, and application-oriented design notes to support component selection, schematic review, PCB planning, and procurement decisions. The comparison tables also identify which parameter values require verification for a particular production design.

ドロップイン代替品: PCM1862DBT — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

PCM1860DBT

✅ ドロップイン ⚠️ 仕様未検証
📦 30-pin TSSOP (DBT)
Same 30-pin TSSOP family footprint; channel and register configuration differ by up to 2 channels, or 100% of the PCM1862's 2-channel configuration.

📋 参考代替品(カタログ未掲載)

PCM1861DBT

✅ ドロップイン ⚠️ 仕様未検証
📦 30-pin TSSOP (DBT)
Same 30-pin TSSOP family footprint; channel and register configuration differ by up to 2 channels, or 100% of the PCM1862's 2-channel configuration.

📋 参考代替品(カタログ未掲載)

PCM1863DBT

✅ ドロップイン ⚠️ 仕様未検証
📦 30-pin TSSOP (DBT)
Same 30-pin TSSOP family footprint; channel and register configuration differ by up to 2 channels, or 100% of the PCM1862's 2-channel configuration.

📋 参考代替品(カタログ未掲載)

PCM1864DBT

✅ ドロップイン ⚠️ 仕様未検証
📦 30-pin TSSOP (DBT)
Same 30-pin TSSOP family footprint; channel and register configuration differ by up to 2 channels, or 100% of the PCM1862's 2-channel configuration.

📋 参考代替品(カタログ未掲載)

PCM1865DBT

✅ ドロップイン
📦 30-pin TSSOP (DBT)
Single channel versus 2 channels in PCM1862, a difference of 1 channel or 50%; both support 24-bit conversion and 192 kSPS.

📋 参考代替品(カタログ未掲載)

PCM1862DBT 最大定格&電気的特性

ADC Type Software-controlled audio ADC with universal front end
Channel Count 2 channels
分解能 24 bit
Maximum Sampling Rate 192 kSPS
Dynamic Range 103 dB
電源電圧 3.3 V
Supply Configuration Single supply
Digital Control Interface I2C and SPI
Programmable Gain Amplifier Integrated and software controlled
Analog Front End Universal front end
パッケージ 30-pin TSSOP (DBT)
動作温度範囲 -40 °C to +125 °C
実装タイプ Surface mount
External Programmable-Gain Stage Not required
Separate 5 V Supply Not required

PCM1862DBT 30-pin tssop (dbt) ピン配置ガイド

PCM1862DBT (30-pin tssop (dbt) パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

PCM1862DBT の 30-pin tssop (dbt) パッケージピン配置図

詳細なピン配置データはありません: PCM1862DBT.

詳細は データシート をご参照ください。

主な用途

PCM1862DBT の用途: 6 件s: Stereo Microphone Capture, Industrial Audio Monitoring, Voice Recognition Interface, USB Audio Front End, Network Communication Equipment, Portable Audio Measurement.

🎧

Stereo Microphone Capture

The PCM1862DBT fits stereo microphone capture because it combines two analog input channels, a software-controlled PGA, 24-bit conversion, and operation from a single 3.3 V rail. A host processor can configure gain and operating mode through I2C or SPI, reducing the need for separate analog gain-control circuitry. The converter's 103 dB dynamic range and 192 kSPS capability preserve a broad range of source levels and support high-resolution recording. In implementation, treat the microphone bias, source impedance, and analog grounding as part of the converter's input network. Keep the two input paths symmetrical, position input and bypass capacitance near the device, and separate microphone or line input routing from SPI and I2C activity. Firmware should confirm channel mapping, PGA settings, clock source, and the selected digital audio format before normal operation.

🏭

Industrial Audio Monitoring

PCM1862DBT is suitable for industrial monitoring equipment requiring two synchronized audio channels without a separate 5 V converter rail. Its 3.3 V single-supply operation simplifies power partitioning in equipment that also contains 3.3 V control electronics, while 24-bit resolution and 103 dB dynamic range support faithful capture of low-level acoustic events. The universal front end and integrated software-controlled gain reduce the component count compared with a discrete analog preamplifier. For machinery or environmental monitoring, route both inputs away from switching nodes and high-current return paths. Use the manufacturer's recommended input network and bypass arrangement, and verify whether the selected PGA range preserves headroom without excessive attenuation. Software should detect clipping and out-of-range conditions so that maintenance data reflects the actual signal level.

🧩

Voice Recognition Interface

The PCM1862DBT can serve as the analog-to-digital front end in a voice-recognition system that needs more precision than a basic 8-bit or 16-bit audio interface. Two channels permit simultaneous microphone capture or a microphone-plus-line-input arrangement, and the integrated programmable gain helps position the signal within the converter's range. Its maximum 192 kSPS rate permits oversampling relative to common voice-processing rates. The PCM1862's digital configuration interface also allows firmware to select gain and operating parameters without adding a separate analog control bus. Place the microphone or line-input network close to the converter, maintain a quiet analog return path, and provide local supply bypassing. Confirm the system clock and data framing expected by the speech processor so that no resampling or channel-swap correction is required later.

🖥️

USB Audio Front End

PCM1862DBT fits a USB audio front end that translates a stereo analog source into 24-bit digital samples for a USB audio controller. Its single 3.3 V operation can simplify board-level power distribution, while I2C or SPI control allows the host firmware to adjust gain and operating modes. Support for sampling rates up to 192 kSPS accommodates high-resolution playback and capture requirements, and the 103 dB dynamic range is appropriate for consumer and pro-audio conversion tasks. Interface timing between the PCM1862 and USB controller must be reviewed carefully, including clock generation, frame alignment, and supported data formats. Keep switching regulators and USB routing away from the analog inputs, use the recommended decoupling network, and verify whether the host requires a specific I2C address or serial timing configuration.

🌐

Network Communication Equipment

PCM1862DBT is applicable to network communication equipment that captures announcement, alarm, or conferencing audio alongside digital data. The two-channel ADC supports paired inputs, while the 3.3 V supply and compact 30-pin TSSOP package simplify integration into communication modules. The 24-bit conversion format and 103 dB dynamic range provide headroom for speech and general-purpose audio, and software-controlled gain enables firmware to accommodate different source levels. Keep analog and digital sections partitioned on the PCB, particularly where Ethernet magnetics, switching regulators, or high-speed clocks are present. Use a controlled reference and grounding strategy, and validate that the converter's clock remains stable when the communication system enters different traffic or power states. Firmware should apply channel checks and gain calibration during startup to maintain consistent capture quality.

📱

Portable Audio Measurement

PCM1862DBT can be used in portable or compact audio measurement equipment where two channels, low supply complexity, and high-resolution conversion are valuable. Its 3.3 V single-supply operation suits battery-managed designs, and the integrated software-controlled PGA reduces the number of external analog adjustments. The 103 dB dynamic range supports comparisons across microphones, pickups, and other sensors, while operation up to 192 kSPS allows higher-rate analysis where the source and mechanical system support it. Low-power operation still requires careful clock and duty-cycle planning. Disable unused channels or configure lower operating modes through the control interface, and ensure that the analog source can tolerate the selected input impedance. Validate the full signal chain with known calibration signals, and separate converter routing from display, charger, and wireless circuitry to minimize measurement noise.

What are the key specifications of PCM1862DBT that engineers should know?
The PCM1862DBT is a 2-channel, 24-bit audio ADC that supports sampling rates up to 192 kSPS, with 103 dB dynamic range and a single 3.3 V supply. It includes a software-controlled universal front end and integrated programmable gain, while I2C and SPI provide host-control options. According to the Texas Instruments PCM1862 product page and manufacturer datasheet, the device is offered in a 30-pin TSSOP package rated for -40 °C to +125 °C.
What is the operating voltage of PCM1862DBT?
The PCM1862DBT operates from a single 3.3 V supply. Its single-supply architecture eliminates the need for a separate 5 V analog supply and reduces power-system complexity. According to the Texas Instruments PCM1862 product page, the PCM186x family supports 3.3 V operation, allowing the converter to share a rail with compatible 3.3 V digital processors when their voltage and decoupling requirements are otherwise compatible.
How many channels and bits does PCM1862DBT provide?
The PCM1862DBT provides two analog input channels with 24-bit digital output resolution. According to the Texas Instruments PCM1862 product page, the converter is a 2-channel audio ADC with a universal front end. The dual-channel architecture is appropriate for stereo line input, two-microphone capture, or other systems requiring paired audio conversion into a common digital stream.
What sampling rate and dynamic range does PCM1862DBT support?
The PCM1862DBT supports sampling rates up to 192 kSPS and provides 103 dB dynamic range. According to the Texas Instruments product page, these figures describe the converter's 2-channel software-controlled audio ADC. The 192 kSPS capability supports high-resolution capture, while the 103 dB dynamic range is relevant when preserving low-level audio detail relative to full-scale signals.
Which digital interfaces can control PCM1862DBT?
The PCM1862DBT can be controlled through I2C or SPI. According to the Texas Instruments PCM1862 ordering information, the converter is identified as a 24-bit, 192 kSPS audio ADC with I2C and SPI interfaces. Firmware must select a compatible clocking and data-transfer configuration, and the interface pins should be assigned using the manufacturer's complete pin-description table.
Where can I download the PCM1862DBT datasheet PDF?
The official PCM1862DBT technical information is available through the Texas Instruments PCM1862 product page at https://www.ti.com/product/PCM1862 and its linked manufacturer datasheet. The part-details page identifies the PCM1862DBT ordering code, DBT 30-pin TSSOP package, 103 dB performance class, and operating-temperature range. Use the manufacturer document for the definitive pin table, electrical characteristics, timing diagrams, and application circuit.
Where can I find the PCM1862DBT pinout?
The PCM1862DBT pinout is documented in the Texas Instruments PCM1862 manufacturer datasheet and the linked product documentation. The package is a 30-pin TSSOP designated DBT. Assign PCB nets using the datasheet pin-description table rather than inferring connections from the family name, and confirm the exposed package dimensions, lead pitch, ground assignments, and analog or digital signal grouping against the current datasheet.
Is PCM1862DBT suitable for a 3.3 V stereo microphone interface?
Yes, the PCM1862DBT is suitable for a 3.3 V stereo microphone interface when the source level, gain, and input network meet its electrical requirements. Its 2-channel architecture supports left and right capture, while the integrated software-controlled PGA can reduce external analog gain components. According to the Texas Instruments product page, single-supply 3.3 V operation and a universal front end simplify high-performance audio front-end integration.
What is the best drop-in replacement for PCM1862DBT?
The PCM1862DBT has several same-family alternatives in the 30-pin TSSOP format, including PCM1860DBT, PCM1861DBT, PCM1863DBT, PCM1864DBT, and PCM1865DBT. Their channel configurations and register behavior can differ, so a mechanical footprint match alone is insufficient. Confirm pin-by-pin compatibility, supply requirements, control-register behavior, and the required audio-channel count against the manufacturer datasheet before approving a substitution.
What can replace PCM1862DBT?
PCM1860DBT, PCM1861DBT, PCM1863DBT, PCM1864DBT, and PCM1865DBT are same-family Texas Instruments candidates in the 30-pin TSSOP family. The best replacement depends on whether the design needs the PCM1862's two-channel configuration, 24-bit resolution, 192 kSPS operation, and specific register behavior. Verify the complete pin list and digital interface implementation before treating any family member as a drop-in replacement.
Is PCM1862DBT the same as PCM1865DBT?
No, the PCM1862DBT is a 2-channel audio ADC, while the PCM1865DBT is identified as a single-channel 24-bit, 192 kSPS converter. Both belong to the PCM186x family and use the DBT 30-pin TSSOP format, but channel count is a functional difference of one channel, or 50% relative to the PCM1862's two channels. Pin assignments and firmware may also differ, so they should not be treated as automatically interchangeable.
PCM1862DBT vs PCM1865DBT - which is better for stereo audio?
The PCM1862DBT is the better choice for a stereo design because it provides two channels, whereas the PCM1865DBT is identified as a single-channel converter. Both support 24-bit conversion and 192 kSPS in the PCM186x family, but the PCM1862 removes the need for two separate converter packages in a basic stereo path. Use PCM1865DBT only when a single channel is required and its complete pin and register configuration matches the design.
When should I choose PCM1862DBT over PCM1864DBT?
Choose PCM1862DBT when the system needs a dedicated 2-channel, 24-bit converter with 103 dB dynamic range and operation up to 192 kSPS. PCM1864DBT belongs to the same 30-pin TSSOP PCM186x family but targets a different channel configuration, so its suitability depends on whether the system can adapt its routing and firmware. The decision should be based on channel count, pin behavior, clocking, and register compatibility rather than package size alone.
Where to buy PCM1862DBT online and what is its current lead time?
Use the Request a Quote form on this page to request PCM1862DBT availability, current lead time, and a quotation for the required quantity. The manufacturer part number is PCM1862DBT in a 30-pin TSSOP DBT package. Requesting the exact MPN through this page helps prevent suffix or packing mismatches and allows the order to be checked against the required quantity and delivery schedule.
What is the price of PCM1862DBT and is it in stock?
Submit a PCM1862DBT request through the Request a Quote form on this page for the current commercial response, including availability and quantity handling. The exact orderable device is the PCM1862DBT in the DBT 30-pin TSSOP package. Confirm current stock, lead time, and any volume pricing in the quotation rather than relying on a historical listing value, since supply and pricing can change.
What are the main design considerations for a PCM1862DBT audio input circuit?
The main considerations are analog signal level, source impedance, gain configuration, clocking, and mixed-signal layout. According to the Texas Instruments PCM1862 family documentation, the converter uses an integrated programmable gain amplifier and operates from a single 3.3 V supply. Keep analog traces short, route digital clocks away from sensitive inputs, follow the recommended decoupling arrangement, and use the manufacturer application circuit as the basis for input and reference design.

エンジニアリング参考データ: PCM1862DBT — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose PCM1862DBT when the design requires a stereo audio ADC with 24-bit resolution, up to 192 kSPS operation, 103 dB dynamic range, integrated software-controlled gain, and a single 3.3 V supply. PCM1865DBT is appropriate only for a single-channel design and removes one of the PCM1862's two channels. PCM1860DBT, PCM1861DBT, PCM1863DBT, and PCM1864DBT remain within the same Texas Instruments PCM186x and 30-pin TSSOP family, but their channel configurations and register behavior must be checked before reuse. For a new stereo design, start with the PCM1862 because its two-channel function directly matches the requirement. For a redesign, compare the complete pin list, digital interface timing, gain-control behavior, clock requirements, and firmware sequence rather than relying on package dimensions alone.

代替品との比較

パラメータ この製品 PCM1860DBT PCM1861DBT PCM1863DBT PCM1864DBT PCM1865DBT
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 30-pin TSSOP (DBT) 30-pin TSSOP (DBT) 30-pin TSSOP (DBT) 30-pin TSSOP (DBT) 30-pin TSSOP (DBT) 30-pin TSSOP (DBT)

主な差別化要因

  • Provides two-channel conversion in one device (vs PCM1865DBT)
  • Single 3.3 V supply simplifies power architecture (vs PCM1861DBT)
  • Integrated software-controlled gain reduces external analog control (vs PCM1860DBT)
  • 103 dB dynamic range supports high-resolution capture (vs PCM1863DBT)

設計ノート

Treat the analog inputs as high-impedance signal paths. Keep the PCM1862 input traces short, minimize loop area, and place input-network components close to the assigned pins. Route SPI, I2C, clock, and data signals away from the input and reference nodes. Use the manufacturer application circuit as the PCB template and preserve its recommended analog and digital partitioning.

Decouple the 3.3 V supply close to the device using the capacitance and placement specified by the manufacturer datasheet. Keep switching-regulator and digital-supply return currents from crossing the analog input and reference paths. Verify startup sequencing, supply ripple at the converter pins, and the operating current required by the selected PCM1862 configuration before finalizing the power tree.

Do not treat a matching TSSOP outline as proof of complete interchangeability. Compare every pin, the required channel count, clocking scheme, register map, and control interface behavior between the PCM1862DBT and the proposed family member. The alternatives may use the same 30-pin package while providing a different number of audio channels, making schematic and firmware changes necessary.

Program the PGA and operating mode before applying a signal to production inputs, and establish a repeatable gain structure that preserves headroom for the loudest expected source. Check channel mapping, digital data alignment, and clipping status during startup. For microphone or line-input circuits, validate source impedance and grounding using the manufacturer's front-end design rather than adding arbitrary input resistance.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

Use the current Texas Instruments material declarations and product compliance documents for the authoritative RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification status.

データ検証日: 2026-11-15 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PCM1862DBT datasheet PCM1862DBT pinout PCM1862DBT datasheet pdf PCM1862DBT equivalent PCM1862DBT replacement PCM1862DBT vs PCM1865DBT PCM1862DBT application circuit PCM1862DBT TSSOP-30 footprint Texas Instruments PCM1862DBT PCM1862DBT price PCM1862DBT stock PCM1862 3.3V 24-bit audio ADC

関連部品&用語

Texas Instruments PCM1862DBT PCM1862 PCM1860DBT PCM1861DBT PCM1863DBT PCM1864DBT PCM1865DBT analog-to-digital converter ADC audio ADC data converter integrated circuit universal front end programmable gain amplifier PGA I2C SPI single-supply operation 3.3 V power supply 24-bit resolution 192 kSPS sampling 103 dB dynamic range 30-pin TSSOP DBT package surface-mount package microphone capture USB audio industrial monitoring European Ecodesign
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示