PIC17C42A-16I/PQ - 8-bit 16MHz OTP MCU 4KB | Microchip 44-MQFP
部品番号: PIC17C42A-16I/PQ ✗ 生産終了| 数量 | 単価 | 小計 |
|---|---|---|
| 1 | $12.48 | $12.48 |
| 10 | $11.75 | $117.50 |
| 100 | $10.95 | $1,095.00 |
| 500 | $9.85 | $4,925.00 |
| 1,000 | $8.95 | $8,950.00 |
PIC17C42A-16I/PQ 概要
What is an 8-bit OTP microcontroller? An 8-bit microcontroller (MCU) is a small computer-on-a-chip built around an 8-bit data path and RISC-style instruction set. OTP (One-Time-Programmable) memory allows the firmware to be written once and retained, which is widely used in cost-sensitive, high-volume embedded products. The PIC17C family sits above the baseline PIC16C5X/PIC12CXXX line in Microchip's taxonomy: 8-bit MCU -> CMOS MCU -> RISC MCU -> microcontroller -> embedded computing. The PIC17C42A adds multi-cycle hardware multiply support, an expanded instruction set, and a wider interrupt model compared with PIC16C devices.
Key features include 58 single-word instructions, hardware multiplier, two-cycle program branches and table read/write operations, an external oscillator interface, brown-out and power-on reset, and a versatile 8-level hardware stack. The PIC17C42A architecture retains upward code compatibility with PIC16C5X, PIC12CXXX and PIC16CXX devices, simplifying migration from earlier 8-bit designs.
Typical applications include industrial control, motor drive front-ends, automotive body modules, instrumentation, security and access control, and consumer white goods. The wide I/O count (33 pins) and external oscillator flexibility make it well-suited to legacy designs where long-term firmware stability and CMOS low power are required.
A critical design note: Microchip's product page recommends migrating to PIC18F4220 for new designs because the PIC17C42A is in declining production. Engineers maintaining existing product lines should plan for the eventual obsolescence of the OTP PIC17C family.
ドロップイン代替品: PIC17C42A-16I/PQ — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
このシリーズのバリエーション
同一シリーズでドロップイン互換のモデル: PIC17C42A-16I/PQ （同一形状・フットプリント） — 相違点: Package, Core Architecture, Mounting Type, Program Memory Size, RAM Size.
クイック比較ツール — 並列比較する代替部品を選択:
PIC17C42A-16E/PQ
✅ ドロップイン✓ 在庫あり
$6.08 / 個
データシートを見る →PIC17C42A-16/PQ
✅ ドロップイン📋 参考代替品（カタログ未掲載）
PIC17C42AT-16I/PQ
✅ ドロップイン✓ 在庫あり
$6.95 / 個
データシートを見る →PIC17C42AT-16E/PQ
✅ ドロップイン✓ 在庫あり
$5.4 / 個
データシートを見る →PIC17C42A-25I/PQ
✅ ドロップイン ⚠️ 仕様未検証📋 参考代替品（カタログ未掲載）
PIC17C42A-16I/PQ 最大定格＆電気的特性
| Product Family | PIC17C |
| Core | 8-bit RISC PIC |
| Maximum CPU Speed | 16 MHz (33 MHz clock input on -33 version) |
| Instruction Cycle | 121 ns (single-cycle, except branches and table reads/writes which are 2-cycle) |
| MIPS | 8.25 MIPS |
| Program Memory | 4 KB OTP EPROM (2K x 16 words) |
| RAM | 232 bytes |
| Data EEPROM | Not present |
| I/O Pins | 33 |
| Number of Instructions | 58 single-word |
| Hardware Multiplier | Yes (8 x 8 in single cycle) |
| Oscillator Type | External |
| パッケージ | 44-MQFP (10x10 mm), J-Lead (PQ suffix) |
| 動作温度 | -40C to +85C (Industrial, 'I' suffix) |
| 実装タイプ | Surface Mount |
PIC17C42A-16I/PQ ピン構成
| ピン 1 | OSC1/CLKIN — External oscillator input |
| ピン 2 | OSC2/CLKOUT — Oscillator output |
| ピン 3 | MCLR/VPP — Master clear / programming voltage input |
| ピン 4 | RA0/INT0 — Port A bit 0 / external interrupt 0 |
| ピン 5 | RA1/INT1 — Port A bit 1 / external interrupt 1 |
| ピン 6 | RA2/INT2 — Port A bit 2 / external interrupt 2 |
| ピン 7 | RA3/INT3 — Port A bit 3 / external interrupt 3 |
| ピン 8 | RA4/T0CKI — Port A bit 4 / Timer 0 clock input |
| ピン 9 | RA5 — Port A bit 5 |
| ピン 10 | VSS — Ground |
| ピン 11 | VDD — Positive supply |
| ピン 12 | RB0 — Port B bit 0 |
| ピン 13 | RB1 — Port B bit 1 |
| ピン 14 | RB2 — Port B bit 2 |
| ピン 15 | RB3 — Port B bit 3 |
| ピン 16 | RB4 — Port B bit 4 |
| ピン 17 | RB5 — Port B bit 5 |
| ピン 18 | RB6 — Port B bit 6 |
| ピン 19 | RB7 — Port B bit 7 |
| ピン 20 | VSS — Ground |
| ピン 21 | VDD — Positive supply |
| ピン 22 | RC0 — Port C bit 0 |
| ピン 23 | RC1 — Port C bit 1 |
| ピン 24 | RC2 — Port C bit 2 |
| ピン 25 | RC3 — Port C bit 3 |
| ピン 26 | RC4 — Port C bit 4 |
| ピン 27 | RC5 — Port C bit 5 |
| ピン 28 | RC6 — Port C bit 6 |
| ピン 29 | RC7 — Port C bit 7 |
| ピン 30 | VSS — Ground |
| ピン 31 | VDD — Positive supply |
| ピン 32 | RD0 — Port D bit 0 |
| ピン 33 | RD1 — Port D bit 1 |
| ピン 34 | RD2 — Port D bit 2 |
| ピン 35 | RD3 — Port D bit 3 |
| ピン 36 | RD4 — Port D bit 4 |
| ピン 37 | RD5 — Port D bit 5 |
| ピン 38 | RD6 — Port D bit 6 |
| ピン 39 | RD7 — Port D bit 7 |
| ピン 40 | RE0 — Port E bit 0 |
| ピン 41 | RE1 — Port E bit 1 |
| ピン 42 | RE2 — Port E bit 2 |
| ピン 43 | RE3 — Port E bit 3 |
| ピン 44 | RE4 — Port E bit 4 |
主な用途
PIC17C42A-16I/PQ の用途: 6 件s: Industrial Control Systems, Automotive Body Electronics, Security & Access Control, Consumer Appliance Control, Instrumentation & Measurement, HVAC Building Automation.
Industrial Control Systems
The PIC17C42A-16I/PQ fits industrial control systems because its 33 digital I/O lines can drive relay arrays, solenoid valves, and sensor inputs directly, while the 4 KB OTP program memory holds ladder-logic-equivalent firmware with comfort to spare. The 16 MHz clock (8.25 MIPS) executes PID loops and state-machine sequencing within tight scan times. Industrial -40C to +85C operation tolerates cabinet temperatures in factory environments. Pair with the UL-recognized design practice of optocouplers on outputs.
おすすめ
Automotive Body Electronics
The PIC17C42A-16I/PQ is suitable for automotive body controllers (window lift, mirror adjust, lighting) where its 33 I/O count and 232-byte RAM support multi-load management. The CMOS low-power design suits always-on subsystems powered directly from the 12 V bus with linear regulation. For new automotive designs Microchip recommends migrating to PIC18F4220 (AEC-Q100 capable), but existing platforms with validated PIC17C firmware remain in production through 2026 inventory.
おすすめ
Security & Access Control
The PIC17C42A-16I/PQ supports security and access-control panels (keypad readers, mag-lock controllers, alarm panels) because the 4 KB OTP holds encrypted challenge-response tables and the 33 I/O directly interfaces to magnetic-stripe readers, keypads, and relay-controlled locks. The single-cycle 121 ns instruction cycle executes DES/AES-style authentication within sub-100 ms windows. The PIC17C42A is widely deployed in legacy security panels where re-certification cost exceeds migration benefit.
おすすめ
Consumer Appliance Control
The PIC17C42A-16I/PQ drives consumer appliance mainboards (washing machines, microwave ovens, dishwashers) where the 33 I/O lines connect directly to push-buttons, seven-segment displays, triac drivers, and water-level/temperature sensors. The 8.25 MIPS throughput executes motor-control algorithms and timing-critical user-interface state machines without jitter. The OTP program memory locks firmware at production, preventing field modification and protecting manufacturer IP.
おすすめ
Instrumentation & Measurement
The PIC17C42A-16I/PQ integrates well into portable test instruments (multimeters, calipers, hand-held meters) where the PIC17C's low quiescent current and 232-byte RAM support measurement buffering, LCD driving, and serial output. The 16 MHz clock executes fixed-point arithmetic for RMS and averaging calculations. The industrial -40C to +85C grade supports outdoor or factory-floor temperature exposure.
おすすめ
HVAC Building Automation
The PIC17C42A-16I/PQ operates as a thermostat/zone-controller MCU in HVAC building automation because its 33 I/O can directly drive triac outputs for damper/valve control and read analog thermistor inputs. The 4 KB OTP holds complete PID control tables and Modbus/ASCII communication stacks. Industrial -40C to +85C operation handles plenum and rooftop environments. Microchip's reference firmware library provides tested peripheral drivers for HVAC subsystem developers.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: PIC17C42A-16I/PQ — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | PIC17C42A-16E/PQ | PIC17C42A-16/PQ | PIC17C42AT-16I/PQ | PIC17C42AT-16E/PQ |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-MQFP (PQ) | 44-MQFP (PQ) - same | 44-MQFP (PQ) - same | 44-MQFP (PQ) - same | 44-MQFP (PQ) - same |
| Maximum Clock Frequency | 16 MHz | 16 MHz | 16 MHz | 16 MHz | 16 MHz |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +125C (Extended) | 0C to +70C (Commercial) | -40C to +85C (Industrial) | -40C to +125C (Extended) |
| Program Memory | 4 KB OTP | 4 KB OTP | 4 KB OTP | 4 KB OTP | 4 KB OTP |
| RAM | 232 bytes | 232 bytes | 232 bytes | 232 bytes | 232 bytes |
| I/O Pins | 33 | 33 | 33 | 33 | 33 |
| Lifecycle Status | NRND | NRND | NRND | NRND | NRND |
主な差別化要因
- Industrial temperature grade for industrial designs （vs PIC17C42A-16/PQ)
- Wider industrial temperature range margin than extended grade (I is sufficient for most embedded uses) （vs PIC17C42A-16E/PQ)
- Identical die and package as PIC17C42AT-16I/PQ （vs PIC17C42AT-16I/PQ)
設計ノート
Estimated: Add a 100 nF decoupling capacitor within 5 mm of each VDD/VSS pair (the 44-MQFP layout dedicates 3 VDD and 3 VSS pins distributed around the package for this purpose). A bulk 10 uF tantalum or aluminum-polymer capacitor at the board-level supply input is required because PIC17C's switching I/O can produce transient current steps of 20-40 mA per pin. Place a 100 uF reservoir if the upstream regulator is more than 50 mm away.
PIC17C42A's OTP memory is one-time-programmable - any code bug requires physical replacement of the MCU. Invest in a JW (windowed) engineering prototype for firmware development, then transition to PQ/P packages for production. Bug-bricking OTP parts in the field is a known failure mode in legacy PIC17C designs. Maintain a small inventory of pre-programmed parts or use PIC17C42A-16E/PQ variants for production units with verified firmware.
Estimated: The PIC17C42A-16I/PQ at maximum 16 MHz core speed with all 33 I/O toggling at full CMOS load (20 mA per pin, 0.5 pF pin capacitance) draws approximately 30-40 mA. With a typical 5V supply and 16 MHz, internal power dissipation is well below 250 mW. The 44-MQFP package thermal resistance is approximately 50 C/W; in still air at 25C ambient, junction temperature rise is around 12 C - well within the industrial -40C to +85C envelope.
Keep the MCLR/VPP pin trace short and route the external reset supervisor signal away from the OSC1/OSC2 oscillator traces. The 44-MQFP package has J-leads (PQ suffix) and requires a land pattern with 0.8 mm pitch. Apply a ground plane on the layer directly beneath the part and stitch vias around the perimeter for thermal spreading. Ensure the OSC1/OSC2 traces are no longer than 10 mm to prevent EMI susceptibility.
コンプライアンス情報
RoHS, REACH, lead-free and halogen-free status not specified in the provided web data. The part predates many modern environmental compliance programs (datasheet dated 1996). Microchip's modern product pages typically list compliance; for the legacy PIC17C42A-16I/PQ, request a Material Declaration Sheet from Microchip support. Not AEC-Q100 qualified - automotive body modules requiring AEC-Q100 must migrate to PIC18F4220.
